Download or read book Precision agriculture 09 written by E.J. van Henten and published by BRILL. This book was released on 2023-09-04 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Agriculture is becoming ever more relevant as the agricultural industry struggles to come to terms with the environment, economics, traceability, vehicle guidance and crop management. Whilst some benefits have proved elusive, others contribute positively to today’s agriculture. Research continues to be necessary and needs to be reported and disseminated to a wide audience. These proceedings contain the reviewed papers from the 7th European Conference on Precision Agriculture. The papers reflect the wide range of disciplines that impinge upon precision agriculture including remote sensing, plant disease and weed detection, yield monitoring, soil sensing, geo statistics and path planning, regional and crop modelling, cooperation and guidance of robots, precision application, ICT in precision agriculture, future farming and European relevance for precision agriculture. The broad range of research topics reported is a valuable resource for researchers, advisors, teachers and professionals in agriculture. Also note that the reviewed papers from the 4th European Conference on Precision Livestock Farming are presented in a companion publication.

Download or read book Fault Detection written by Wei Zhang and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, a number of innovative fault diagnosis algorithms in recently years are introduced. These methods can detect failures of various types of system effectively, and with a relatively high significance.

Download or read book Supervision and Safety of Complex Systems written by Nada Matta and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents results of projects carried out by both scientific and industry researchers into the techniques to help in maintenance, control, supervision and security of systems, taking into account the technical environmental and human factors. This work is supported by the Scientific Group GIS 3SGS. It is a collaborative work from 13 partners (academic and industrial) who have come together to deal with security problems. The problems and techniques discussed mainly focus on stochastic and dynamic modeling, maintenance, forecasting, diagnosis, reliability, performance, organizational, human and environmental factors, uncertainty and experience feedback.

Download or read book Fault Diagnosis Applications written by Rolf Isermann and published by Springer Science & Business Media. This book was released on 2011-04-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supervision, condition-monitoring, fault detection, fault diagnosis and fault management play an increasing role for technical processes and vehicles in order to improve reliability, availability, maintenance and lifetime. For safety-related processes fault-tolerant systems with redundancy are required in order to reach comprehensive system integrity. This book is a sequel of the book “Fault-Diagnosis Systems” published in 2006, where the basic methods were described. After a short introduction into fault-detection and fault-diagnosis methods the book shows how these methods can be applied for a selection of 20 real technical components and processes as examples, such as: Electrical drives (DC, AC) Electrical actuators Fluidic actuators (hydraulic, pneumatic) Centrifugal and reciprocating pumps Pipelines (leak detection) Industrial robots Machine tools (main and feed drive, drilling, milling, grinding) Heat exchangers Also realized fault-tolerant systems for electrical drives, actuators and sensors are presented. The book describes why and how the various signal-model-based and process-model-based methods were applied and which experimental results could be achieved. In several cases a combination of different methods was most successful. The book is dedicated to graduate students of electrical, mechanical, chemical engineering and computer science and for engineers.

Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by Springer. This book was released on 2014-08-30 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the latest technical developments and trends involving wind turbine control and monitoring, fault diagnosis, and wind power systems, ‘Wind Turbine Control and Monitoring’ presents an accessible and straightforward introduction to wind turbines, but also includes an in-depth analysis incorporating illustrations, tables and examples on how to use wind turbine modeling and simulation software. Featuring analysis from leading experts and researchers in the field, the book provides new understanding, methodologies and algorithms of control and monitoring, computer tools for modeling and simulation, and advances the current state-of-the-art on wind turbine monitoring and fault diagnosis; power converter systems; and cooperative & fault-tolerant control systems for maximizing the wind power generation and reducing the maintenance cost. This book is primarily intended for researchers in the field of wind turbines, control, mechatronics and energy; postgraduates in the field of mechanical and electrical engineering; and graduate and senior undergraduate students in engineering wishing to expand their knowledge of wind energy systems. The book will also interest practicing engineers dealing with wind technology who will benefit from the comprehensive coverage of the theoretic control topics, the simplicity of the models and the use of commonly available control algorithms and monitoring techniques.

Download or read book Intelligent Systems in Technical and Medical Diagnostics written by Jozef Korbicz and published by Springer Science & Business Media. This book was released on 2013-07-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years technical and medical diagnostics has been the area of intensive scientific research. It covers well-established topics as well as emerging developments in control engineering, artificial intelligence, applied mathematics, pattern recognition and statistics. At the same time, a growing number of applications of different fault diagnosis methods, especially in electrical, mechanical, chemical and medical engineering, is being observed. This monograph contains a collection of 44 carefully selected papers contributed by experts in technical and medical diagnostics, and constitutes a comprehensive study of the field. The aim of the book is to show the bridge between technical and medical diagnostics based on artificial intelligence methods and techniques. It is divided into four parts: I. Soft Computing in Technical Diagnostics, II. Medical Diagnostics and Biometrics, III. Robotics and Computer Vision, IV. Various Problems of Technical Diagnostics. The monograph will be of interest to scientists as well as academics dealing with the problems of designing technical and medical diagnosis systems. Its target readers are also junior researchers and students of computer science, artificial intelligence, control or robotics.

Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.

Download or read book Solving Optimization Problems with the Heuristic Kalman Algorithm written by Rosario Toscano and published by Springer Nature. This book was released on with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fault Tolerant Control Schemes Using Integral Sliding Modes written by Mirza Tariq Hamayun and published by Springer. This book was released on 2016-04-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key attribute of a Fault Tolerant Control (FTC) system is its ability to maintain overall system stability and acceptable performance in the face of faults and failures within the feedback system. In this book Integral Sliding Mode (ISM) Control Allocation (CA) schemes for FTC are described, which have the potential to maintain close to nominal fault-free performance (for the entire system response), in the face of actuator faults and even complete failures of certain actuators. Broadly an ISM controller based around a model of the plant with the aim of creating a nonlinear fault tolerant feedback controller whose closed-loop performance is established during the design process. The second approach involves retro-fitting an ISM scheme to an existing feedback controller to introduce fault tolerance. This may be advantageous from an industrial perspective, because fault tolerance can be introduced without changing the existing control loops. A high fidelity benchmark model of a large transport aircraft is used to demonstrate the efficacy of the FTC schemes. In particular a scheme based on an LPV representation has been implemented and tested on a motion flight simulator.

Download or read book Control Performance Assessment Theoretical Analyses and Industrial Practice written by Paweł D. Domański and published by Springer Nature. This book was released on 2019-09-01 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of currently available Control Performance Assessment methods. It covers a broad range of classical and modern methods, with a main focus on assessment practice, and is intended to help practitioners learn and properly perform control assessment in the industrial reality. Further, it offers an educational guide for control engineers, who are currently in high demand in the industry. The book consists of three main parts. Firstly, a comprehensive review of available approaches is presented and discussed. The classical canon methods are extended with a discussion of nonlinear and complex alternative measures using non-Gaussian statistics, persistence and fractional calculations. Secondly, the methods’ applicability aspects are visualized with the aid of computer simulations, covering the most popular control philosophies used in the process industry. Lastly, a critical review of the methods discussed, on the basis of real-world industrial examples, rounds out the coverage.

Download or read book Fault Diagnosis and Fault Tolerant Control Strategies for Non Linear Systems written by Marcin Witczak and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected fault diagnosis and fault-tolerant control strategies for non-linear systems in a unified framework. In particular, starting from advanced state estimation strategies up to modern soft computing, the discrete-time description of the system is employed Part I of the book presents original research results regarding state estimation and neural networks for robust fault diagnosis. Part II is devoted to the presentation of integrated fault diagnosis and fault-tolerant systems. It starts with a general fault-tolerant control framework, which is then extended by introducing robustness with respect to various uncertainties. Finally, it is shown how to implement the proposed framework for fuzzy systems described by the well-known Takagi–Sugeno models. This research monograph is intended for researchers, engineers, and advanced postgraduate students in control and electrical engineering, computer science, as well as mechanical and chemical engineering.

Download or read book Critical Information Infrastructures Security written by Christos G. Panayiotou and published by Springer. This book was released on 2016-03-24 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the 9th International Conference on Critical Information Infrastructures Security, CRITIS 2014, held in Limassol, Cyprus, in October 2014. The 20 full and 19 short papers presented in this volume were carefully reviewed and selected from 74 submissions. They are organized in topical sections named: cyber-physical systems and sensor networks; security of water systems; power and energy system security; security and recovery policies, cyber security; and security tools and protocols.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Advanced Solutions in Diagnostics and Fault Tolerant Control written by Jan M. Kościelny and published by Springer. This book was released on 2017-07-28 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest achievements concerning the theory, methods and practice of fault diagnostics, fault tolerant systems and cyber safety. When considering the diagnostics of industrial processes and systems, increasingly important safety issues cannot be ignored. In this context, diagnostics plays a crucial role as a primary measure of the improvement of the overall system safety integrity level. Obtaining the desired diagnostic coverage or providing an appropriate level of inviolability of the integrity of a system is now practically inconceivable without the use of fault detection and isolation methods. Given the breadth and depth of its coverage, the book will be of interest to researchers faced with the challenge of designing technical and medical diagnosis systems, as well as junior researchers and students in the fields of automatic control, robotics, computer science and artificial intelligence.

Download or read book Bond Graphs for Modelling Control and Fault Diagnosis of Engineering Systems written by Wolfgang Borutzky and published by Springer. This book was released on 2016-12-31 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory and latest application work in Bond Graph methodology with a focus on: • Hybrid dynamical system models, • Model-based fault diagnosis, model-based fault tolerant control, fault prognosis • and also addresses • Open thermodynamic systems with compressible fluid flow, • Distributed parameter models of mechanical subsystems. In addition, the book covers various applications of current interest ranging from motorised wheelchairs, in-vivo surgery robots, walking machines to wind-turbines.The up-to-date presentation has been made possible by experts who are active members of the worldwide bond graph modelling community. This book is the completely revised 2nd edition of the 2011 Springer compilation text titled Bond Graph Modelling of Engineering Systems – Theory, Applications and Software Support. It extends the presentation of theory and applications of graph methodology by new developments and latest research results. Like the first edition, this book addresses readers in academia as well as practitioners in industry and invites experts in related fields to consider the potential and the state-of-the-art of bond graph modelling.

Download or read book Robotics written by Fernando Santos Osório and published by Springer. This book was released on 2016-09-29 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 12th Latin American Robotics Symposium and Third Brazilian Symposium on Robotics, LARS 2015 / SBR 2015, held in Uberlândia, Brazil, in October/November 2015. The 17 revised full papers presented were carefully reviewed and selected from 80 submissions. The selected papers present a complete and solid reference of the state-of-the-art of intelligent robotics and automation research, covering the following areas: autonomous mobile robots, tele-operated and telepresence robots, human-robot interaction, trajectory control for mobile robots, autonomous vehicles, service-oriented robotic systems, semantic mapping, environment mapping, visual odometry, applications of RGB-D sensors, humanoid and biped robots, Robocup soccer robots, robot control, path planning, multiple vehicles and teams of robots. /div

Download or read book Robust and Fault Tolerant Control written by Krzysztof Patan and published by Springer. This book was released on 2019-03-16 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust and Fault-Tolerant Control proposes novel automatic control strategies for nonlinear systems developed by means of artificial neural networks and pays special attention to robust and fault-tolerant approaches. The book discusses robustness and fault tolerance in the context of model predictive control, fault accommodation and reconfiguration, and iterative learning control strategies. Expanding on its theoretical deliberations the monograph includes many case studies demonstrating how the proposed approaches work in practice. The most important features of the book include: a comprehensive review of neural network architectures with possible applications in system modelling and control; a concise introduction to robust and fault-tolerant control; step-by-step presentation of the control approaches proposed; an abundance of case studies illustrating the important steps in designing robust and fault-tolerant control; and a large number of figures and tables facilitating the performance analysis of the control approaches described. The material presented in this book will be useful for researchers and engineers who wish to avoid spending excessive time in searching neural-network-based control solutions. It is written for electrical, computer science and automatic control engineers interested in control theory and their applications. This monograph will also interest postgraduate students engaged in self-study of nonlinear robust and fault-tolerant control.