Download or read book 4D Printing written by Rupinder Singh and published by Elsevier. This book was released on 2022-01-11 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4D Printing: Fundamentals and Applications explores both autonomic and non-autonomic systems with different stimulus such as temperature, current, moisture, light and sound. In addition, the fifth dimensional aspect using more than one stimulus is outlined for additive manufacturing processes. The book presents both an introduction to the basic understanding of hybrid processes and explores the physics behind the process (in the form of derivation and numerical problems). For the field engineer, applicable codes and standards for each hybrid process are provided. Lastly, case studies are included in each section to provide the reader with a model to explore future research directions. Begins with the fundamentals of the hybrid additive manufacturing process Presents a discussion of the physics behind smart material functioning in hybrid additive manufacturing Includes real world case studies on 4D and 5D printing, as well as a look at future research dimensions
Download or read book 3D and 4D Printing of Polymer Nanocomposite Materials written by Kishor Kumar Sadasivuni and published by Elsevier. This book was released on 2019-10-11 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D and 4D Printing of Polymer Nanocomposite Materials: Processing, Applications, and Challenges covers advanced 3D and 4D printing processes and the latest developments in novel polymer-based printing materials, thus enabling the reader to understand and benefit from the advantages of this groundbreaking technology. The book presents processes, materials selection, and printability issues, along with sections on the preparation of polymer composite materials for 3D and 4D printing. Across the book, advanced printing techniques are covered and discussed thoroughly, including fused deposition modeling (FDM), selective laser sintering (SLS), selective laser melting (SLM), electron beam melting (EBM), inkjet 3D printing (3DP), stereolithography (SLA), and 3D plotting. Finally, major applications areas are discussed, including electronic, aerospace, construction and biomedical applications, with detailed information on the design, fabrication and processing methods required in each case. Provides a thorough, clear understanding of polymer preparation techniques and 3D and 4D printing processes, with a view to specific applications Examines synthesis, formation methodology, the dispersion of fillers, characterization, properties, and performance of polymer nanocomposites Explores the possibilities of 4D printing, covering the usage of stimuli responsive hydrogels and shape memory polymers
Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.
Download or read book 3D Printing Technology in Nanomedicine written by Nabeel Ahmad and published by Elsevier. This book was released on 2019-03-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing Technology in Nanomedicine provides an integrated and introductory look into the rapidly evolving field of nanobiotechnology. It demystifies the processes of commercialization and discusses legal and regulatory considerations. With a focus on nanoscale processes and biomedical applications, users will find this to be a comprehensive resource on how 3D printing can be utilized in a range of areas, including the diagnosis and treatment of a variety of human diseases. Examines the emerging market of 3D-printed biomaterials and their clinical applications, with a particular focus on both commercial and premarket tools Examines the promising market of 3D-printed nanoparticles, nanomaterial, biomaterials, composite nanomaterial and their clinical applications in the cardiovascular and chemotherapy realms Develops the concept of integrating different technologies along the hierarchical structure of biological systems
Download or read book Mechanically Responsive Materials for Soft Robotics written by Hideko Koshima and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive review of the research and development of mechanically responsive materials and their applications in soft robots Mechanically Responsive Materials for Soft Robotics offers an authoritative guide to the current state of mechanically responsive materials for the development of soft robotics. With contributions from an international panel of experts, the book examines existing mechanically responsive materials such as crystals, polymers, gels, and composites that are stimulated by light and heat. The book also explores the application of mechanical materials to soft robotics. The authors describe the many excellent mechanical crystals developed in recent years that show the ability to bend, twist, rotate, jump, self-heal, and shape memory. Mechanical polymer materials are described for evolution into artificial muscles, photomobile materials, bioinspired soft actuators, inorganic-organic hybrid materials, multi-responsive composite materials, and strain sensor materials. The application of mechanical materials to soft robots is just the beginning. This book reviews the many challenging and versatile applications, such as soft microrobots made from photoresponsive elastomers, four-dimensional printing for assembling soft robots, self-growing of soft robots like plants, and biohybrid robots using muscle tissue. This important book: -Explores recent developments in the use of soft smart materials in robotic systems -Covers the full scope of mechanically responsive materials: polymers, crystals, gels, and nanocomposites -Deals with an interdisciplinary topic of advanced smart materials research -Contains extensive descriptions of current and future applications in soft robotics Written for materials scientists, polymer chemists, photochemists, physical chemists, solid state chemists, inorganic chemists, and robotics engineers, Mechanically Responsive Materials for Soft Robotics offers a comprehensive and timely review of the most recent research on mechanically responsive materials and the manufacture of soft robotics.
Download or read book 4D Printing The Next Generation Technology written by Dirk Schreder and published by . This book was released on 2018-10-19 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4D Printing - What is the innovative successor of 3D Printing? Of course, 4D Printing! 😃 Printing technology is not new at all. However, the evolution journey of this technology is very interesting. I'm sure, you've heard about the amazing 3D printing technology, which revolutionized this industry and caused new use cases. 4D printing is an improvement of 3D printing. It is also referred to as the future of 3D printing, and the future is already here with us. With 4D printing, you create a print that can change its shape after printing. For example, you can think of it as printing a box that can open, close, fold or unfold when it is exposed to certain elements. In this book, you will learn: the evolution of printing technology how 4D Printing does work the main benefits of 4D Printing Possible applications of 4D Printing Now in its beginner steps, in future, this technology can only grow and go mainstream. It is possible that it will be available at consumer stages soon, even in appliances and utensil that we use daily. The future of 4D printing technology looks exceptionally bright and you can bet it will not take decades to see the fruits as it took the 3D technology. Does is sound interesting? Read this book and get more insights about 4D Printing!
Download or read book Self Assembly Lab written by Skylar Tibbits and published by Taylor & Francis. This book was released on 2016-11-10 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: What if structures could build themselves or adapt to fluctuating environments? Skylar Tibbits, Director of the Self-Assembly Lab in the Department of Architecture at MIT, Cambridge, MA, crosses the boundaries between architecture, biology, materials science and the arts, to envision a world where material components can self-assemble to provide adapting structures and optimized fabrication solutions. The book examines the three main ingredients for self-assembly, includes interviews with practitioners involved in the work and presents research projects related to these topics to provide a complete first look at exciting future technologies in construction and self-transforming material products.
Download or read book The State of Creativity written by James Griffin and published by Edward Elgar Publishing. This book was released on 2019 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Creativity has been of central importance to the development of the modern State, and yet creativity is something that has become increasingly side-lined. This has been particularly apparent with the development of new machinic technologies, such as 3D printing. This monograph argues that inner creativity, combined with the zone of discourse, has been endangered by the rise of administrative regulation. Griffin investigates how the failure to incorporate creativity into that administrative regulation is adversely impacting the regulation of technologies such as 3D printing. The State of Creativity, proposes reforms to ensure that the regulation does take creativity into account.
Download or read book 3D and 4D Printing in Biomedical Applications written by Mohammed Maniruzzaman and published by John Wiley & Sons. This book was released on 2019-03-18 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein professioneller Leitfaden zu 3D- und 4D-Drucktechniken in der Biomedizin und Pharmazie. 3D and 4D Printing in Biomedical Applications führt fundiert in 3D- und 4D-Drucktechniken in der Biomedizin und Pharmazie ein. Dieses Fachbuch enthält Beiträge von internationalen Wissenschaftlern und Industrieexperten und bietet einen Überblick über das Thema, aktuelle Forschungsergebnisse und Innovationen zu Anwendungen in der Pharmazie und Biomedizin. Untersucht werden Prozessoptimierung, Innovationsprozesse, Engineering- und Plattformtechnologien. Darüber hinaus informiert das Werk über Entwicklungen in der Biomedizin, u. a. über Formgedächtnispolymere, Biofabrikation in 4D und Knochen aus dem Drucker. Eine Fülle von Themen werden behandelt und näher beleuchtet: Potenzial des 3D-Drucks für die Wirkstoffverabreichung, neue Fertigungsprozess, Bio-Scaffolding, neueste Trends und Herausforderungen für 3D- und 4D-Bioprinting in der Biofabrikation. Dieses wertvolle Referenzwerk - ist ein umfassender Leitfaden zu 3D- und 4D-Drucktechniken in der Biomedizin und Pharmazie. - informiert u. a. über die erste 3D-Druckplattform mit FDA-Zulassung für ein pharmazeutisches Erzeugnis. - enthält Reviews der derzeit verfügbaren pharmazeutischen Erzeugnisse, die per 3D-Druck hergestellt wurden. - präsentiert die jüngsten Fortschritte bei neuartigen Materialien für den 3D- und 4D-Druck und biomedizinische Anwendungen.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book 4D Printing Technology written by Bijaya Bikram Samal and published by Wiley-Scrivener. This book was released on 2024-08-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fused Deposition Modeling Based 3D Printing written by Harshit K. Dave and published by Springer Nature. This book was released on 2021-04-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers 3D printing activities by fused deposition modeling process. The two introductory chapters discuss the principle, types of machines and raw materials, process parameters, defects, design variations and simulation methods. Six chapters are devoted to experimental work related to process improvement, mechanical testing and characterization of the process, followed by three chapters on post-processing of 3D printed components and two chapters addressing sustainability concerns. Seven chapters discuss various applications including composites, external medical devices, drug delivery system, orthotic inserts, watertight components and 4D printing using FDM process. Finally, six chapters are dedicated to the study on modeling and optimization of FDM process using computational models, evolutionary algorithms, machine learning, metaheuristic approaches and optimization of layout and tool path.
Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more
Download or read book Smart Materials in Additive Manufacturing Volume 1 4D Printing Principles and Fabrication written by Mahdi Bodaghi and published by Elsevier. This book was released on 2022-06-27 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4D-Printed Smart Materials and Structures: Mechanics, Modeling, and Advanced Engineering Applications provides a thorough introduction to the fundamentals of the mechanics, manufacturing, modeling, and applications of 4D printed smart materials and structures. Divided into two sections, the book starts by covering the basic theories, definitions, and fabrication details of 4D printing and various smart materials such as shape memory polymers, stimuli-responsive hydrogels, pneumatic soft actuators, dielectric elastomer soft robots, liquid crystal elastomers, shape memory alloys, and magnetic stimulus structures. The second part then examines the mechanics of these materials and their various applications, covering topics such as variable stiffness, miniature-sized 4D printing, and bi-stable and multi-stable mechanisms. The book also includes a chapter on machine learning in 4D printing and provides applications in mechanical, aerospace, civil, and structural engineering, among others.
Download or read book 4D Printing written by Kevin Chen and published by Royal Collins Publishing Company. This book was released on 2021-03-31 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an emerging market in the future, 4D printing has attracted increasing attention. 4D Printing: Transforming the Future Business Ecology combines theory and application with divergent thinking. Examining what 4D printing is, how to do 4D printing, the impact of 4D printing on design, manufacturing, energy utilization, and other aspects, the changes 4D printing will bring to human society, the legal and intellectual property issues involved in 4D printing, and the changes 4D printing will bring to China and even the earth, the book systematically presents a different human society supported by 4D printing technology, serving as an inspiration for future technical researchers and the public to understand 4D printing technology.
Download or read book Smart 3D Nanoprinting written by Ajit Behera and published by CRC Press. This book was released on 2022-08-18 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining smart 3D printing at the nanoscale, this book discusses various methods of fabrication, the presence of inherent defects and their annihilation, property analysis, and emerging applications across an array of industries. The book serves to bridge the gap between the concept of nanotechnology and the tailorable properties of smart 3D-print products. FEATURES Covers surface and interface analysis and smart technologies in 3D nanoprinting Details different materials, such as polymers, metals, semiconductors, glassceramics, and composites, as well as their selection criteria, fabrication, and defect analysis at nanoscale Describes optimization and modeling and the effect of machine parameters on 3D-printed products Discusses critical barriers and opportunities Explores emerging applications in manufacturing industries, such as aerospace, healthcare, automotive, energy, construction, and defense Smart 3D Nanoprinting: Fundamentals, Materials, and Applications is aimed at advanced students, researchers, and industry professionals in materials, manufacturing, chemical, and mechanical engineering. This book offers readers a comprehensive overview of the properties, opportunities, and applications of smart 3D nanoprinting.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.