Download or read book Design and Management of Manufacturing Systems written by Arkadiusz Gola and published by MDPI. This book was released on 2021-09-02 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the design and management of manufacturing systems have been explored in the literature for many years now, they still remain topical problems in the current scientific research. The changing market trends, globalization, the constant pressure to reduce production costs, and technical and technological progress make it necessary to search for new manufacturing methods and ways of organizing them, and to modify manufacturing system design paradigms. This book presents current research in different areas connected with the design and management of manufacturing systems and covers such subject areas as: methods supporting the design of manufacturing systems, methods of improving maintenance processes in companies, the design and improvement of manufacturing processes, the control of production processes in modern manufacturing systems production methods and techniques used in modern manufacturing systems and environmental aspects of production and their impact on the design and management of manufacturing systems. The wide range of research findings reported in this book confirms that the design of manufacturing systems is a complex problem and that the achievement of goals set for modern manufacturing systems requires interdisciplinary knowledge and the simultaneous design of the product, process and system, as well as the knowledge of modern manufacturing and organizational methods and techniques.

Download or read book Advances in Manufacturing written by Adam Hamrol and published by Springer. This book was released on 2017-10-18 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in material, mechanical, and management engineering, especially in the area of machine design, product assembly, measurement systems, process planning and quality control. It describes cutting-edge methods and applications, together with exemplary case studies. The content is based on papers presented at the 5th International Scientific-Technical Conference (MANUFACTURING 2017) held in Poznan, Poland on 24-26 October 2017. The book brings together engineering and economic topics, is intended as an extensive, timely and practice-oriented reference guide for researchers and practitioners, and is expected to foster better communication and closer cooperation between universities and their business and industry partners.

Download or read book Entrepreneurship and Digital Transformation Managing Disruptive Innovation in a Changing Environment written by Víctor Jesús García Morales and published by Frontiers Media SA. This book was released on 2022-02-02 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Social Occupational Ergonomics written by Richard H.M. Goossens and published by Springer. This book was released on 2017-06-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research related to social and occupational factors. It presents innovative contributions to the optimization of sociotechnical management systems, which consider organizational, policy, and logistical issues. It discusses timely topics related to communication, crew resource management, work design, participatory design, as well as teamwork, community ergonomics, cooperative work, and warning systems. Moreover, it reports on new work paradigms, organizational cultures, virtual organizations, telework, and quality management. The book reports on cutting-edge infrastructures implemented for different purposes such as urban, health, and enterprise. It discusses the growing role of automated systems and presents innovative solutions addressing the needs of special populations. Based on the AHFE 2017 International Conference on Social and Occupational Ergonomics, held on July 17-21, 2017, in Los Angeles, California, USA, the book provides readers with a comprehensive view of the current challenges in both organizational and occupational ergonomics, highlighting key connections between them and underlining the importance of emotional factors in influencing human performance.

Download or read book Corporate Social Responsibility in the Manufacturing and Services Sectors written by Paulina Golinska-Dawson and published by Springer. This book was released on 2018-11-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corporate Social Responsibility (CSR) is an important element in creating competitive advantages for enterprises in different sectors. The authors guide readers through the different cases studies in order to present the benchmarking of international standards and CSR initiatives, as well as CSR performance evaluation practices. This book aims to identify current problems that can arise during CSR implementation in manufacturing and services companies. Moreover some best practice examples suitable for the introduction of CSR in the small and medium size companies will be described. The authors show how different stakeholders can benefit from sustainable resource management and pro-social behaviors. This book will be a valuable resource for both academics and practitioners who want to deepen their knowledge of CSR. This scientific monograph has been doubled blind reviewed.

Download or read book Technologies and Innovation written by Rafael Valencia-García and published by Springer. This book was released on 2018-10-22 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 4th International Conference on Technologies and Innovation, CITI 2018, held in Guayaquil, Ecuador, in November 2018. The 21 full papers presented in this volume were carefully reviewed and selected from 64 submissions. They are organized in topical sections named: ICT in agronomy; software engineering; intelligent and knowledge-based systems; e-learning.

Download or read book Business and Non profit Organizations Facing Increased Competition and Growing Customers Demands written by Adam Nalepka and published by Institute of Econonics, Polish Academy of Sciences. This book was released on 2017 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the perspective of commercial and non-commercial organizations, this monograph with contemporary organizational and management problems, focus on four thematic areas. Traditionally, the first one is concentrating the reader’s attention on the internal aspects of the organization’s functioning as an object of research. In this regard, articles related to the concept of corporate social responsibility in two ways: organizational research and bibliometric analysis. The authors used an analogical (bibliometric) approach to examine trends in publishing for the concept of learning organizations. In this part of the discussion, the social aspect has been strongly displayed, also thanks to the social capital and enterprise. Another topic in this section is the role of the workers’ knowledge in creating innovative solutions, emphasizing the role of trust and culture-rich collaboration between employees, employees’ participation in creating projects, and organizational change. In addition, it discusses the role of information and knowledge networks and sharing knowledge among employees, which does remain without influence on the shaping of individual employees’ careers. Slightly different from the other articles, though set in this section, there is an article referring to the organizational pathology. These considerations are much more valuable, usually because of the difficult access to negative information. The next section presents articles in the context of the modern tools used in the management of commercial and non-commercial organizations. This part of the discussion starts an article about forecasting methods and modern models of business management. In opposition to these considerations, the problem of unused, modern management methods in the local government sector, remains valid. Also, it refers to social media as a source of customer knowledge and management control, which should be considered as a strong and innovative determinant influencing the development of contemporary management methods of a modern enterprise. Interesting considerations are included in the article on the process management, with emphasis on the dynamic management of business processes and IT systems that go with it. The other articles present the concepts of the risk management model in a technology project, business model used in franchising, and the concept of accountability in conjunction with the development of innovation thanks to negotiating the role of intellectual capital. The modern market economy forces organizations to develop their ability to adapt to the conditions by improving their organization continually. It shows how modern-day commercial and non-commercial organizations are competing in a competitive market. This section opens the article, referring to the social competences of students developed during their studies and the competences of the future, which were studied and compared in two universities. The integral part of the organization’s functioning of the organization in the environment is their broadly understood cooperation for the implementation of the objectives and achieving a competitive advantage in the market. This trend covers articles referring to the participation of county in networking, modeling synergistic interrelations within the business association, or the conditions that should be met between enterprises and institutions supporting the technological development of the organization. Other considerations concern customer preferences concerning their choice of commercial banks, the factors that determine the choice of financial instruments by small and medium enterprises, or the demands of sustainable family business development. The final part of the articles is related to a broader perspective, and so the functioning of the organization from a sectoral perspective and across industries. A distinctive feature is a sectoral approach to knowledge-based business services, the determinants of knowledge-based products in the pharmaceutical industry, and the behavior of competing companies in the chocolate and confectionery industry. A separate topic in this section is the concept of capturing value or the value in a sectoral approach. The issues related to the protection of personal data in the healthcare sector, patent activity of enterprises in the technology park, as well as the management of resources in the cluster. The prepared monograph is an interdisciplinary compendium of knowledge on the functioning of both commercial and non-commercial organizations in the context of three perspectives: micro, meso, and macro. The advantage of this type of studies is modern and up-to-date look at the problems of management, organization behavior, or the functioning of the organizations in the sector.

Download or read book Learning Technologies and Systems written by Carina S. González-González and published by Springer Nature. This book was released on 2023-05-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed conference proceedings of the 21st International Conference on Web-Based Learning, ICWL 2022 and 7th International Symposium on Emerging Technologies for Education, SETE 2022, held in Tenerife, Spain in November 21–23, 2022. The 45 full papers and 5 short papers included in this book were carefully reviewed and selected from 82 submissions. The topics proposed in the ICWL&SETE Call for Papers included several relevant issues, ranging from Semantic Web for E-Learning, through Learning Analytics, Computer-Supported Collaborative Learning, Assessment, Pedagogical Issues, E-learning Platforms, and Tools, to Mobile Learning. In addition to regular papers, ICWL&SETE 2022 also featured a set of special workshops and tracks: The 5th International Workshop on Educational Technology for Language Learning (ETLL 2022), The 6th International Symposium on User Modeling and Language Learning (UMLL 2022), Digitalization in Language and Cross-Cultural Education, First Workshop on Hardware and software systems as enablers for lifelong learning (HASSELL).

Download or read book Application of Communication Computational Intelligence and Learning written by Sangeeta Jadhav and published by Taylor & Francis. This book was released on 2022-06-21 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The special issue is dedicated to National conference on Communication, computational intelligence and learning-NCCCIL sponsored by AICTE and organized by Department of Information Technology at Army Institute of Technology from 12–13 January 2022. This conference gave the collaborative forum to academic experts, researchers and corporate professionals to enrich their knowledge in the automation and analysis of industry and business processes in a smart way. The two day conference included invited talks and paper presentations focusing on the applications of Computational intelligence, Communication, Machine Learning and Artificial Intelligence.

Download or read book Social Manufacturing Fundamentals and Applications written by Pingyu Jiang and published by Springer. This book was released on 2018-06-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces social manufacturing, the next generation manufacturing paradigm that covers product life cycle activities that deal with Internet-based organizational and interactive mechanisms under the context of socio-technical systems in the fields of industrial and production engineering. Like its subject, the book's approach is multi-disciplinary, including manufacturing systems, operations management, computational social sciences and information systems applications. It reports on the latest research findings regarding the social manufacturing paradigm, the architecture, configuration and execution of social manufacturing systems and more. Further, it describes the individual technologies enabled by social manufacturing for each topic, supported by case studies. The technologies discussed include manufacturing resource minimalization and their socialized reorganizations, blockchain models in cybersecurity, computing and decision-making, social business relationships and organizational networks, open product design, social sensors and extended cyber-physical systems, and social factory and inter-connections. This book helps engineers and managers in industry to practice social manufacturing, as well as offering a systematic reference resource for researchers in manufacturing. Students also benefit from the detailed discussions of the latest research and technologies that will have been put into practice by the time they graduate.

Download or read book Fundamentals of Risk Management written by Paul Hopkin and published by Kogan Page Publishers. This book was released on 2017-01-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Risk Management, now in its fourth edition, is a comprehensive introduction to commercial and business risk for students and a broad range of risk professionals. Providing extensive coverage of the core frameworks of business continuity planning, enterprise risk management and project risk management, this is the definitive guide to dealing with the different types of risk an organization faces. With relevant international case examples from both the private and public sectors, this revised edition of Fundamentals of Risk Management is completely aligned to ISO 31000 and provides a full analysis of changes in contemporary risk areas including supply chain, cyber risk, risk culture and improvements in risk management documentation and statutory risk reporting. This new edition of Fundamentals of Risk Management has been fully updated to reflect the development of risk management standards and practice, in particular business continuity standards, regulatory developments, risks to reputation and the business model, changes in enterprise risk management (ERM), loss control and the value of insurance as a risk management method. Also including a thorough overview of the international risk management standards and frameworks, strategy and policy, this book is the definitive professional text for risk managers.

Download or read book Project Management written by Fabio Nonino and published by Sapienza Università Editrice. This book was released on 2018-09-18 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary organizations are undertaking increasingly complex projects in globalized, uncertain and dynamic environments. Proliferation of international programs, growing and challenging sophistication of technologies and of projects’ scope, and the increasing number of stakeholders are only some of the factors that increase or generate project complexity. Enhancing the understanding of what project complexity is and delineating the antecedents that increase or generate complexity can be fundamental steps towards the identification of drivers that cause complexity and consequences for project management performance. The PMI® Italian Academic Workshop, organized in 20-21 September 2018 by Sapienza University of Rome and the three Italian Chapter of the Project Management Institute, has been an event aimed at supporting participants to develop their researches to a further stage through in-depth discussions on the topic of project complexity. In collaboration with the PMI® Italy Chapters.

Download or read book The Maintenance Management Framework written by Adolfo Crespo Márquez and published by Springer Science & Business Media. This book was released on 2007-06-10 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The Maintenance Management Framework” describes and reviews the concept, process and framework of modern maintenance management of complex systems; concentrating specifically on modern modelling tools (deterministic and empirical) for maintenance planning and scheduling. It will be bought by engineers and professionals involved in maintenance management, maintenance engineering, operations management, quality, etc. as well as graduate students and researchers in this field.

Download or read book Reverse Logistics written by Rommert Dekker and published by Springer Science & Business Media. This book was released on 2013-06-05 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses decision making in reverse logistics, which concerns the integration of used and obsolete products back into the supply chain as valuable resources. It covers a wide range of aspects, related to distribution, production and inventory management, and supply chain management. For each topic, it highlights key managerial issues in real-life examples and explains which quantitative models are available for addressing them. By treating a broad range of issues in a unified way, the book offers the reader a comprehensive view on the field of reverse logistics.

Download or read book Mastering Information Management written by Thomas H. Davenport and published by Financial Times/Prentice Hall. This book was released on 2000 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Davenport and Marchand bring together the knowledge managers need to make sense of "mere" data and technology. "Mastering Information Management" organizes the full range of cutting-edge ideas, tools and techniques for successfully managing the information-driven business.

Download or read book Dorland s Dictionary of Medical Acronyms and Abbreviations written by Dorland and published by Elsevier Health Sciences. This book was released on 2015-07-24 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical acronyms and abbreviations offer convenience, but those countless shortcuts can often be confusing. Now a part of the popular Dorland's suite of products, this reference features thousands of terms from across various medical specialties. Its alphabetical arrangement makes for quick reference, and expanded coverage of symbols ensures they are easier to find. Effective communication plays an important role in all medical settings, so turn to this trusted volume for nearly any medical abbreviation you might encounter. - Symbols section makes it easier to locate unusual or seldom-used symbols. - Convenient alphabetical format allows you to find the entry you need more intuitively. - More than 90,000 entries and definitions. - Many new and updated entries including terminology in expanding specialties, such as Nursing; Physical, Occupational, and Speech Therapies; Transcription and Coding; Computer and Technical Fields. - New section on abbreviations to avoid, including Joint Commission abbreviations that are not to be used. - Incorporates updates suggested by the Institute for Safe Medication Practices (ISMP).

Download or read book Lean Maintenance written by Joel Levitt and published by Industrial Press Inc.. This book was released on 2008 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for anyone in a leadership position in maintenance, storeroom or production, this unique book will also be found useful by vendors to the maintenance departments, including maintenance contractors, parts vendors, and various kinds of service providers. As a practical book, Lean Maintenance will take the reader on a journey from uncovering waste, designing projects to address the waste, selling the projects to management and delivering the projects. Every area in maintenance is covered, including your TPM effort, storeroom, PM tasking, work orders and computer systems. What's more, the user will be able to immediately use this book to start the process of saving money, energy, or time within just one hour Provides examples at every step of the way to guide the reader. Includes forms and check lists for successful Lean projects. Offers the reader the ability to design and execute a savings project within a day.