Download or read book 3D Printing in Radiation Oncology written by James Robar and published by CRC Press. This book was released on 2024-07-05 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Radiation Oncology: Personalization of Patient Treatment Through Digital Fabrication presents a comprehensive and practical view of the many forms in which 3D printing is being integrated into radiation oncology practice. Radiation oncology employs among the most sophisticated digital technologies in medicine. Until recently, however, the “last mile” of treatment has required manually produced or generic devices for patient set up, positioning, control of surface dose, and delivery of brachytherapy treatment. 3D printing is already offering enhancements in both precision and efficiency through the digital design and fabrication of patient photon and electron bolus, customized surface and gynecological brachytherapy applicators, proton beam compensators and range shifters, patient immobilization, novel radiation detectors, and phantoms. Various innovations are disrupting decades-old practices in radiation therapy (RT) facilities, resulting in vital improvements in personalization of treatment and patient experience. An essential read for radiation oncologists, medical physicists, radiation therapists, oncology nurses, hospital administrators, engineers, and medical educators, this book is an indispensable resource for those bringing 3D printing to the RT clinic, looking to expand the role of 3D printing in their practice, or embarking upon related research and development.
Download or read book 3D Printing in Radiation Therapy written by James L. Robar and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "3D Printing in Radiation Therapy: A Handbook presents a comprehensive and practical view of the many forms in which 3D printing is being integrated into radiation oncology practice. Radiation oncology employs among the most sophisticated digital technologies in medicine. Until recently, however, the "last mile" of treatment has required manually-produced or generic devices for patient set up, positioning, control of surface dose, and delivery of brachytherapy treatment. 3D printing is already offering enhancements in both precision and efficiency through the digital design and fabrication of patient photon and electron bolus, customized surface and gynecological brachytherapy applicators, proton beam compensators and range shifters, patient immobilization, novel radiation detectors and phantoms. Various innovations are disrupting decades-old practices in radiation therapy (RT) facilities, resulting in vital improvements in personalization of treatment and patient experience. An essential read for radiation oncologists, medical physicists, radiation therapists, oncology nurses, hospital administrators, engineers and medical educators, this book is an indispensable reference for those bringing 3D printing to the RT clinic, looking to expand the role of 3D printing in their practice, or embarking upon related research and development"--
Download or read book 3D Printing in Radiotherapy written by Tomas Kron and published by IOP Publishing Limited. This book was released on 2024-03-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Radiation Therapy provides practical and comprehensive guidance for the implementation, quality management, maintenance and safe use of a clinical 3D printing programme in the radiation therapy context. This book is a valuable resource for all radiation therapy staff who are planning, setting up, managing, researching, auditing or working within a 3D printing service.
Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. Consolidates today’s available information on this timely topic into a single, convenient, resource.
Download or read book Additive Manufacturing of Elastomeric Lung Phantoms in Radiation Oncology written by Jonathan Sookdeo and published by . This book was released on 2020 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cancer is a particularly difficult disease to manage and treat, with cancer of the lung being a notably complex disease to treat with radiation therapy. In this study, a stereolithography-based 3D printing process was developed to fabricate human lung phantoms with identical mechanical and physical properties of human lungs in order to assist with targeted radiation therapy. A highly flexible UV photopolymer material with an elastic modulus of approximately 350 KPa was formulated for use in a custom-built stereolithography-based 3D printing apparatus. The printer built for 3D printing of the photopolymer features a large build volume with off-shelf components with fully open-source and efficient design. A lung phantom model of approximately 1/3rd scale was printed and further tested to simulate the tidal breathing motion in a respirator apparatus.
Download or read book 3D Printing in Orthopaedic Surgery written by Matthew Dipaola and published by Elsevier Health Sciences. This book was released on 2018-11-20 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get a quick, expert overview of the role of emerging 3D printing technology in orthopaedic surgery, devices, and implants. This concise resource by Drs. Matthew DiPaola and Felasfa Wodajo provides orthopaedic surgeons and residents with need-to-know information on the clinical applications of 3D printing, including current technological capabilities, guidance for practice, and future outlooks for this fast-growing area. Covers basic principles such as engineering aspects, software, economics, legal considerations, and applications for education and surgery planning. Discusses 3D printing in arthroplasty, trauma and deformity, the adult and pediatric spine, oncology, and more. Includes information on setting up a home 3D printing "plant" and 3D printing biologics. Consolidates today’s available information on this burgeoning topic into a single convenient resource
Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Download or read book Advances in 3D Printing written by Ashutosh Sharma and published by BoD – Books on Demand. This book was released on 2023-05-03 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of International Conference on 3D Printing Technology and Innovations 2017 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: July 05-06, 2017 Frankfurt, Germany Key Topics : Challenges in 3D Printing, 3D Printing Technology & Market, Advances in 3D Printing & Additive Manufacturing Technology, 3D Printing in Medicine, 3D printing in Biomaterials, 3D Printing Materials, 3D Printing Industries, 3D Printing Technology Impact on Manufacturing Industry, 3D Printing Future Technology, Benefits of 3D Printing and Technology, Innovations in 3D Printing, Challenge of 3D Printing in Radiation oncology, Clinical applications of 3D Printing in Orthopaedics and Traumatology, 3D Printing for Liver Tissue Engineering, B2B and B2C Partnering and Collaborations, 3D Bio printing, Design for 3D Printing, Lasers in 3D Printing in Manufacturing Industry, Metal 3D Printing, 3D Image Processing and Visualization, Tissue and Organ printing, Polymers in 3d printing,
Download or read book Emerging Technologies in Brachytherapy written by William Y. Song and published by CRC Press. This book was released on 2017-05-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brachytherapy is continuously advancing. Years of accumulated experience have led to clinical evidence of its benefit in numerous clinical sites such as gynecological, prostate, breast, rectum, ocular, and many other cancers. Brachytherapy continues to expand in its scope of practice and complexity, driven by strong academic and commercial research, by advances in competing modalities, and due to the diversity in the political and economic landscape. It is a true challenge for practicing professionals and students to readily grasp the overarching trends of the field, especially of those technologies and innovative practices that are not yet established but are certainly on the rise. Addressing this challenge, Emerging Technologies in Brachytherapy presents a comprehensive collection of chapters on the latest trending/emerging technologies and expert opinions. It is divided into five broad sections: Section I: Physics of Brachytherapy Section II: Imaging for Brachytherapy Guidance Section III: Brachytherapy Suites Section IV: Is Brachytherapy a Competitive Modality? Section V: Vision 20/20: Industry Perspective Each section has a carefully selected collection of chapters, which covers the spectrum of topics in comprehensive detail. By drawing on recognized experts and key opinion leaders from academia and commercial sectors worldwide (100+ contributors), Emerging Technologies in Brachytherapy provides readers with a wealth of relevant information needed to comprehend the rapidly advancing technologies and trends of today and the prospects for the future.
Download or read book Personalized Radiation Therapy Guided with Imaging Technologies written by Yingli Yang and published by Frontiers Media SA. This book was released on 2023-01-09 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of 2nd International Conference on 3D Printing Technology and Innovations 2018 written by ConferenceSeries and published by ConferenceSeries. This book was released on with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: March 19-20, 2018 London, UK. Key Topics: Applications of 3D Printing in healthcare & medicine, Advances in 3D Printing & Additive Manufacturing Technology, Benefits of 3D Printing and Technology, Innovations in 3D Printing, 3D Printing Technology Impact on Manufacturing Industry, 3D printing in Biomaterials, 3D Printing Materials, Polymers in 3d printing, Tissue and Organ printing, 3D Image Processing and Visualization, 3D Printing of Supply Chain Management, Metal 3D Printing, 3D Printing Industries, 3D Bio printing, Design for 3D Printing, Future Technology in 3D Printing, 3D Printing for Liver Tissue Engineering, 3D Printing Technology & Market, Clinical applications of 3D Printing in Orthopaedics and Traumatology, Lasers in 3D Printing in , Manufacturing Industry, Challenges in 3D Printing, Challenge of 3D printing in Radiation oncology, B2B and B2C Partnering and Collaborations, 3D Printing & Beyond: 4D Printing
Download or read book 3D Printing written by Jasjit S. Suri and published by Elsevier Health Sciences. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D printing across surgical sub-specialties. Covers 3D printing and its application in major surgical specialties, as well as dentistry, transplantation, global surgery, and diagnostic and interventional radiology. Consolidates today's available information on this burgeoning topic into a single convenient resource.
Download or read book 3D Printing in Medicine written by Deepak M. Kalaskar and published by Woodhead Publishing. This book was released on 2022-10-18 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Medicine, Second Edition examines the rapidly growing market of 3D-printed biomaterials and their clinical applications. With a particular focus on both commercial and premarket tools, the book looks at their applications within medicine and the future outlook for the field. The chapters are written by field experts actively engaged in educational and research activities at the top universities in the world. The earlier chapters cover the fundamentals of 3D printing, including topics such as materials and hardware. The later chapters go on to cover innovative applications within medicine such as computational analysis of 3D printed constructs, personalized 3D printing - including 3D cell and organ printing and the role of AI - with a subsequent look at the applications of high-resolution printing, 3D printing in diagnostics, drug development, 4D printing, and much more. This updated new edition features completely revised content, with additional new chapters covering organs-on-chips, bioprinting regulations and standards, intellectual properties, and socio-ethical implications of organs-on-demand. Reviews a broad range of biomedical applications of 3D printing biomaterials and technologies Provides an interdisciplinary look at 3D printing in medicine, bridging the gap between engineering and clinical fields Includes completely updated content with additional new chapters, covering topics such as organs-on-chips, bioprinting regulations, intellectual properties, medical standards in 3D printing, and more
Download or read book Perez Brady s Principles and Practice of Radiation Oncology written by Edward C. Halperin and published by Lippincott Williams & Wilkins. This book was released on 2018-09-06 with total page 2448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from 3rd Party sellers are not guaranteed by the Publisher for quality, authenticity, or access to any online entitlements included with the product. For more than 30 years, Perez and Brady's Principles and Practice of Radiation Oncology has been the must-have standard reference for radiation oncologists and radiation oncology residents who need a comprehensive text covering both the biological and physical science aspects of this complex field as well as disease site-specific information on the integrated, multidisciplinary management of patients with cancer. The book has established itself as the discipline’s "text-of-record," belonging on the shelf of all of those working in the field. The Seventh Edition continues this tradition of excellence with extensive updates throughout, many new chapters, and more than 1,400 full-color illustrations that highlight key concepts in tumor pathogenesis, diagnosis, and targeted radiation therapy.
Download or read book 3D Printing at Hospitals and Medical Centers written by Frank J. Rybicki and published by Springer Nature. This book was released on 2024 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition describes the fundamentals of three-dimensional (3D) printing as applied to medicine and extends the scope of the first edition of 3D Printing in Medicine to include modern 3D printing within Health Care Facilities, also called at the medical "Point-Of-Care" (POC). This edition addresses the practical considerations for, and scope of hospital 3D printing facilities, image segmentation and post-processing for Computer Aided Design (CAD) and 3D printing. The book provides details regarding technologies and materials for medical applications of 3D printing, as well as practical tips of value for physicians, engineers, and technologists. Individual, comprehensive chapters span all major organ systems that are 3D printed, including cardiovascular, musculoskeletal, craniomaxillofacial, spinal, neurological, thoracic, and abdominal. The fabrication of maxillofacial prosthetics, the planning of head and neck reconstructions, and 3D printed medical devices used in cranial reconstruction are also addressed. The second edition also includes guidelines and regulatory considerations, costs and reimbursement for medical 3D printing, quality assurance, and additional applications of CAD such as virtual reality. There is a new Forward written by Ron Kikinis, PhD and a new Afterword written by Michael W. Vannier, MD. This book offers radiologists, surgeons, and other physicians a rich source of information on the practicalities and expanding medical applications of 3D printing. It will also serve engineers, physicist, technologists, and hospital administrators who undertake 3D printing. The second edition is designed as a textbook and is expected to serve in this capacity to fill educational needs in both the medical and engineering sectors.
Download or read book Clinical 3D Dosimetry in Modern Radiation Therapy written by Ben Mijnheer and published by CRC Press. This book was released on 2017-10-31 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a first comprehensive summary of the basic principles, instrumentation, methods, and clinical applications of three-dimensional dosimetry in modern radiation therapy treatment. The presentation reflects the major growth in the field as a result of the widespread use of more sophisticated radiotherapy approaches such as intensity-modulated radiation therapy and proton therapy, which require new 3D dosimetric techniques to determine very accurately the dose distribution. It is intended as an essential guide for those involved in the design and implementation of new treatment technology and its application in advanced radiation therapy, and will enable these readers to select the most suitable equipment and methods for their application. Chapters include numerical data, examples, and case studies.
