Download or read book 3D Printing in Oral Maxillofacial Surgery written by Lobat Tayebi and published by Springer Nature. This book was released on 2021-08-24 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.
Download or read book A Textbook of Advanced Oral and Maxillofacial Surgery written by Mohammad Hosein Motamedi and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced oral and maxillofacial surgery encompasses a vast array of diseases, disorders, defects, and deformities as well as injuries of the mouth, head, face, and jaws. It relates not only to treatment of impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancers, jaw cysts, and tumors but also to facial cosmetic surgery and placement of dental and facial implants. This specialty is evolving alongside advancements in technology and instrumentation. Volume 1 has topped 132,000 chapter downloads so far, and Volume 2 is being downloaded at the same pace! Volume 3 is basically the sequel to Volumes 1 and 2; 93 specialists from nine countries contributed to 32 chapters providing comprehensive coverage of advanced topics in OMF surgery.
Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.
Download or read book Tissue Engineering in Oral and Maxillofacial Surgery written by Riitta Seppänen-Kaijansinkko and published by Springer Nature. This book was released on 2019-12-02 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough, up-to-date description of the scientific basis and concepts of tissue engineering in the oral and maxillofacial region. The opening chapters present an introduction to tissue engineering, describe the roles of biomaterials and stem cells, discuss the use of growth factors, and examine potential adverse reactions. The challenges of soft and hard tissue engineering for oral and maxillofacial reconstruction are then considered in detail. It is explained what has been achieved to date, and potential future perspectives are explored. The importance and the verification of adequate vascularization are discussed, and a further focus is the use of 3D printing, both in the planning and production of scaffolds and in the bioprinting of cells and biomaterials. Information is also included on safety, efficacy, and regulatory aspects. Tissue Engineering in Oral and Maxillofacial Surgery will be of interest to all researchers and practitioners who wish to learn more about the potential of tissue engineering to revolutionize practice in oral and maxillofacial surgery.
Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. - Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. - Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. - Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. - Consolidates today's available information on this timely topic into a single, convenient, resource.
Download or read book Mandibular Reconstruction written by Arnold Komisar and published by Thieme. This book was released on 1997 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive atlas describing the surgical options for reconstructing the mandible.
Download or read book 3D Printing In Dentistry written by Dr. Neha Singh and published by DENTOMED PUBLICATION HOUSE. This book was released on 2021-08-03 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Technologies in Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2018-06-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Craniofacial 3D Imaging written by Onur Kadioglu and published by Springer. This book was released on 2019-01-28 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to serve as an up-to-date reference on the use of cone-beam computed tomography for the purpose of 3D imaging of the craniofacial complex. The focus is in particular on the ways in which craniofacial 3D imaging changes how we think about conventional diagnosis and treatment planning and on its clinical applications within orthodontics and oral and maxillofacial surgery. Emphasis is placed on the value of 3D imaging in visualizing the limits of the alveolar bone, the airways, and the temporomandibular joints and the consequences for treatment planning and execution. The book will equip readers with the knowledge required in order to apply and interpret 3D imaging to the benefit of patients. All of the authors have been carefully selected on the basis of their expertise in the field. In describing current thinking on the merits of 3D craniofacial imaging, they draw both on the available scientific literature and on their own translational research findings.
Download or read book 3D Printing written by Jasjit S. Suri and published by Elsevier Health Sciences. This book was released on 2021-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies in 3D printing offer innovative capabilities in surgery, from planning complex operations to providing alternatives to traditional training with more cost-effective outcomes. In 3D Printing: Application in Medical Surgery, Volume 2, Drs. Vasileios N. Papadopoulos, Vassilios Tsioukas, and Jasjit S. Suri bring together up-to-date information on 3D printing and its application in surgical specialties such as hebatobilliary and pancreatic surgery, vascular surgery, orthopedic surgery, obstetrics and gynecology, cardiovascular and thoracic surgery, and more. Discusses challenges and opportunities of 3D printing across surgical sub-specialties. Covers 3D printing and its application in major surgical specialties, as well as dentistry, transplantation, global surgery, and diagnostic and interventional radiology. Consolidates today's available information on this burgeoning topic into a single convenient resource.
Download or read book Virtual Endoscopy and 3D Reconstruction in the Airways written by Nabil A. Shallik and published by Springer Nature. This book was released on 2019-11-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in its approach, covering the impact of virtual endoscopy and 3D reconstruction on surgical modalities and perioperative airway options. Airway management is an essential skill that is practiced daily by almost all anesthetists across the world. Most of the anesthesia-related morbidities and mortalities in the perioperative period are associated with respiratory complications, either of airway or pulmonary problems. Thus, the prediction of airway complications in perioperative period has been an active research field for many decades and is a cornerstone of perioperative anesthesia assessment and management. Virtual endoscopy & 3D reconstruction is a novel, reliable and non-invasive airway assessment tool that is able to reconstruct simple CT images to provide a clear view of the airway down to the bronchial trees, and offers the highest possible sensitivity, comparable with fiberoptic endoscopic pictures. This revolutionary tool avoids the hazards of invasive airway assessment by fiber-optic bronchoscopy, like bleeding from airway masses, sedation induced airway collapse and other complications. This book is a valuable resource for anesthesiologists, intensivists, surgeons, radiologists, otolaryngologists, medical students as well as residents in training.
Download or read book Medical Modelling written by Richard Bibb and published by Woodhead Publishing. This book was released on 2014-12-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medical modelling and the principles of medical imaging, Computer Aided Design (CAD) and Rapid Prototyping (also known as Additive Manufacturing and 3D Printing) are important techniques relating to various disciplines - from biomaterials engineering to surgery. Building on the success of the first edition, Medical Modelling: The application of Advanced Design and Rapid Prototyping techniques in medicine provides readers with a revised edition of the original text, along with key information on innovative imaging techniques, Rapid Prototyping technologies and case studies.Following an overview of medical imaging for Rapid Prototyping, the book goes on to discuss working with medical scan data and techniques for Rapid Prototyping. In this second edition there is an extensive section of peer-reviewed case studies, describing the practical applications of advanced design technologies in surgical, prosthetic, orthotic, dental and research applications. - Covers the steps towards rapid prototyping, from conception (modelling) to manufacture (manufacture) - Includes a comprehensive case studies section on the practical application of computer-aided design (CAD) and rapid prototyping (RP) - Provides an insight into medical imaging for rapid prototyping and working with medical scan data
Download or read book Fundamental Texts on European Private Law written by Oliver Radley-Gardner and published by Bloomsbury Publishing. This book was released on 2003-10-31 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Among the most significant legal developments of our time is the emergence of a European private law. The European Union enacts directives which profoundly affect the practice,teaching and study of core areas of 'classical' private law. Internationally commissions have formulated principles of European trusts, contract and commercial law. Furthermore, uniform private law can be found in a number of international conventions. This book gathers together fundamental texts from these three sources into one convenient volume. Its emphasis is on general civil and commercial law, particularly on the obligations and property aspects of these. Fully updated, it contains the recent directives in the areas of E-Commerce, Electronic Signatures and Late Payments. It also makes available for the first time English language versions of a number of texts by international commissions. This book is a sister volume to the original German and the subsequent Spanish version. With full references to the implementation of the directives in Denmark, EIRE, Finland, Sweden and the United Kingdom, this book will be a useful resource for practitioners, students and teachers working in the field of European private law.
Download or read book Guided Endodontics written by Niraj Kinariwala and published by Springer Nature. This book was released on 2020-11-21 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This superbly illustrated book provides a comprehensive overview of guided endodontics, a technology-driven, contemporary treatment approach that represents a paradigm shift in endodontics. Guided endodontics is now the proven, safe, predictable and, clinically, the most effective method for management of calcified root canals and root-end resection surgeries. This book covers detailed step-by-step digital treatment planning and the clinical application of static guides and dynamic navigation systems for, both, surgical and non-surgical endodontic treatment. In essence, this novel technology utilizes preoperative CBCT scans and intra-oral 3D scans as well as uniquely developed special software, for virtual planning of the endodontic treatment. This book delineates 3D printing, CBCT, digital impression systems, static guide designing with different software and clinical application of static and dynamic navigation in endodontics and much more. The concluding chapter addresses the future trends in 3D guidance in endodontics, in particular, and dentistry in general.
Download or read book Orbital Reconstruction An Issue of Atlas of the Oral Maxillofacial Surgery Clinics written by Leander Dubois and published by Elsevier Health Sciences. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of the Atlas of the Oral and Maxillofacial Surgery Clinics of North America focuses on Orbital Surgery and is edited by Drs. Leander Dubois and A.G. (Eddy) Becking. Articles will include: Anatomy of the orbits; Orthoptic evaluation in orbital fractures; Standard preformed implants vs. patient specific implants; Implementation of an evidence-based clinical protocol for orbital fracture management; Ocular injury and emergencies around the globe; Secondary corrections of the orbit: Solitary fractures; Secondary corrections around the orbit: ZMC, NOE, panfacial; 3D virtual planning for orbital surgery; Orbital surgery navigation: The past, the present, and the future; Advanced concept of orbital reconstruction: Improving predictability of orbital reconstruction; Primary orbital fracture repair; Indications and timing of orbital surgery; and more!
Download or read book Principles of Oral and Maxillofacial Surgery written by U. J. Moore and published by John Wiley & Sons. This book was released on 2011-01-31 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published over 40 years ago, this is one of the best-established introductory texts for students of dentistry and oral and maxillofacial surgery. It covers each of the basic tenets of the specialty, from patient management to anxiety and pain control, to implant dentistry and maxillofacial trauma. The sixth edition has been thoroughly revised to reflect the latest developments in the field, and each chapter has been completely updated and restructured. New chapters specifically on implant dentistry have been included. This latest edition also features for the first time colour images of clinical procedures, clear colour diagrams and e-learning references. This book is of undoubted value for students and recently qualified practitioners of dentistry, for whom it acts as a complete and ready reference through which to gain a firm foothold in oral and maxillofacial surgery. Key features • Covers each basic tenet of oral and maxillofacial surgery • Presents information in a clear and student-friendly style • Reflects latest developments in the field with updates throughout • Provides new chapters specifically on implant dentistry • Includes colour clinical photographs and diagrams
Download or read book Oral and Maxillofacial Surgery for the Clinician written by Krishnamurthy Bonanthaya and published by Springer Nature. This book was released on 2021 with total page 1965 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book with CC BY 4.0 license. This comprehensive open access textbook provides a comprehensive coverage of principles and practice of oral and maxillofacial surgery. With a range of topics starting from routine dentoalveolar surgery to advanced and complex surgical procedures, this volume is a meaningful combination of text and illustrations including clinical photos, radiographs, and videos. It provides guidance on evidence-based practices in context to existing protocols, guidelines and recommendations to help readers deal with most clinical scenarios in their daily surgical work. This multidisciplinary textbook is meant for postgraduate trainees, young practicing oral surgeons and experienced clinicians, as well as those preparing for university and board certification exams. It also aids in decision-making, the implementation of treatment plans and the management of complications that may arise. This book is an initiative of Association of Oral and Maxillofacial Surgeons of India (AOMSI) to its commitment to academic medicine. As part of this commitment, this textbook is in open access to help ensure widest possible dissemination to readers across the world. ; Open access Unique presentation with contents divided into color-coded core competency gradations Covers all aspects of oral and maxillofacial surgery Supplemented with videos of all commonly carried out procedures as operative video Every chapter or topic concludes with "future perspective" and addresses cutting edge advances in each area Every topic has a pull out box that provides the most relevant systematic reviews/ key articles to every topic.
