Download or read book 3D Printing for Construction with Alternative Materials written by Bárbara Rangel and published by Springer Nature. This book was released on 2023-01-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the latest achievements and design possibilities that 3D printing for construction (DPC) can offer, the alternative materials to natural aggregates or cement and even the 4th dimension that is already starting in this area. DPC materiality is starting to be explored in architecture as a new design language to reach not only outrageous forms but also to leverage the building process and its performance. Like Corbusier explored the concrete potentiality of concrete to release the façade and the plan, 3DPC is allowing to straighten design freedom with building performance. Industry and Scientific research are offering design professionals possibilities to start a new design movement. New paths are also starting to be tracked to reduce even more this building system footprint, stalking alternatives to Portland cement (PC). Today is already possible to build with the soil from the buildings’ ground. Leftovers from various industries are opening possibilities to decrease the PC and natural aggregates rate in printable mortars. From the industry, salt is becoming a possibility to be used in 3DPC. Sugar can ashes are improving the mortar performance reducing adjuvants. Construction and demolition waste can substitute natural aggregates and even offer new textures and color possibilities. Finally, to close this edition, the latest steps on the use of Phase Change Materials in additive manufacturing are collected to raise awareness to the next step of AM, the 4D printing.
Download or read book 3D Materials and Construction Possibilities written by Loretta Waldman and published by Cavendish Square Publishing, LLC. This book was released on 2017-12-15 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most students will work with a plastic when making things with a 3D printer, but that is only scratching the surface of materials that can be used in these machines. This book takes a look at the different materials that can be used by 3D printers, what those materials can make, and the advantages and disadvantages for each.
Download or read book Printing Architecture written by Ronald Rael and published by Chronicle Books. This book was released on 2018-05-22 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although 3D printing promises a revolution in many industries, primarily industrial manufacturing, nowhere are the possibilities greater than in the field of product design and modular architecture. Ronald Rael and Virginia San Fratello, of the cutting-edge San Francisco–based design firm Emerging Objects, have developed remarkable techniques for "printing" from a wide variety of powders, including sawdust, clay, cement, rubber, concrete, salt, and even coffee grounds, opening an entire realm of material, phenomenological, and ecological possibilities to designers. In addition to case studies and illustrations of their own work, Rael and San Fratello offer guidance for sourcing alternative materials, specific recipes for mixing compounds, and step-by-step instructions for conducting bench tests and setting parameters for material testing, to help readers to understand the process of developing powder-based materials and their unique qualities.
Download or read book 3D Concrete Printing Technology written by Jay G. Sanjayan and published by Butterworth-Heinemann. This book was released on 2019-02-15 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Concrete Printing Technology provides valuable insights into the new manufacturing techniques and technologies needed to produce concrete materials. In this book, the editors explain the concrete printing process for mix design and the fresh properties for the high-performance printing of concrete, along with commentary regarding their extrudability, workability and buildability. This is followed by a discussion of three large-scale 3D printings of ultra-high performance concretes, including their processing setup, computational design, printing process and materials characterization. Properties of 3D-printed fiber-reinforced Portland cement paste and its flexural and compressive strength, density and porosity and the 3D-printing of hierarchical materials is also covered. - Explores the factors influencing the mechanical properties of 3D printed products out of magnesium potassium phosphate cement material - Includes methods for developing Concrete Polymer Building Components for 3D Printing - Provides methods for formulating geopolymers for 3D printing for construction applications
Download or read book Construction 3D Printing written by Ming Jen Tan and published by Springer Nature. This book was released on with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing for Construction in the Transformation of the Building Industry written by Bárbara Rangel and published by CRC Press. This book was released on 2024-11-08 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: As concrete revolutionised construction in the 20th century, digitalisation is transforming the building industry (BI). Process automation and 3D printing (3DP) are commonplace in the industry and our homes. However, due to BI’s scale and complexity, Additive Manufacturing (AM) is in its native stage. Ongoing scientific research has been providing knowledge that will simplify the integration of 3DCP in the market, exploring its materiality, technologies, and design methodologies. This book provides an overview of the latest research achievements of the design possibilities that 3DP for construction (3DC) can offer in the various fields of construction, particularly architecture and engineering.
Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-30 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.
Download or read book Second RILEM International Conference on Concrete and Digital Fabrication written by Freek P. Bos and published by Springer Nature. This book was released on 2020-07-08 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book Sustainability for 3D Printing written by Kamalpreet Sandhu and published by Springer Nature. This book was released on 2021-08-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: With advancement in modern technology human life span in 21st century has significantly improved as compared to past centuries. Indeed, the manufacturing and household wastes have also boosted in the same era, presenting a hazardous condition to the various living beings. However, through smart methodologies, it can be possible to recycle/reuse of the different types of wastes as a feedstock convenient for specialized manufacturing technologies, such as 3D printing. This means that through proper facilities the waste can be used as the raw material for the printing technologies with characteristic at par with the virgin feedstock. Furthermore, producing the feedstock using waste materials will help to reduce the cost of the processing material, productivity and eco-friendliness of this manufacturing technology. This book will cover a boarder aspect of such efforts wherein various applications and state of art solutions will be discussed in a comprehensive way. This book will be much interest for academics, research and entrepreneur who are working in the field materials science, 3D printing, and manufacturing because of its coverage of state of art solution in the field of commercial, industrial and healthcare products.
Download or read book Smart Sustainable Infrastructure Building a Greener Tomorrow written by Nemkumar Banthia and published by Springer Nature. This book was released on with total page 1210 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing of Concrete written by Arnaud Perrot and published by John Wiley & Sons. This book was released on 2019-04-10 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of digital manufacturing techniques, such as 3D printing applied to concrete material, opens up new perspectives on the way in which buildings are designed. Research on this theme is thriving and there is a high rate of innovation related to concrete. At the same time, the first life-size constructions made from printed concrete are emerging from the ground. This book presents state-of-the-art knowledge on the different printing processes as well as on the concrete material that must adapt to these new manufacturing techniques, such as new hardware and new printers for concrete. The possibilities in terms of architectural design are discussed as well as the pathways that remain to be uncovered. The book also explores the challenges that researchers and companies expect to overcome as they get closer to democratizing this potential revolution that is the digital manufacturing of concrete.
Download or read book Third RILEM International Conference on Concrete and Digital Fabrication written by Richard Buswell and published by Springer Nature. This book was released on 2022-06-24 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers peer-reviewed contributions presented at the 3rd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held in Loughborough, UK, on June 27-29, 2022. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.
Download or read book Additive Manufacturing for Construction written by Biranchi Panda and published by Emerald Group Publishing. This book was released on 2023-12-08 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for Construction reveals additive manufacturing technologies for building and construction applications. The book explores on-site and off-site construction techniques, featuring design strategies which will eliminate production difficulties and minimise assembly costs, from both academic and industrial perspectives.
Download or read book 3D Printed Houses The Future of Construction or Hype written by StoryBuddiesPlay and published by StoryBuddiesPlay. This book was released on 2024-04-11 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dive into the World of 3D-Printed Homes: A Comprehensive Guide Are you interested in the future of construction? Look no further than 3D-printed houses! This innovative technology is rapidly transforming the way we build homes, offering exciting possibilities for affordability, sustainability, and design customization. This comprehensive guide explores everything you need to know about 3D-printed houses. We'll delve into the printing process, from the materials used to the fascinating technology behind it. We'll also unpack the social impact of 3D-printed housing, exploring its potential to address housing shortages and create more sustainable communities. Here are some key areas we'll cover: The Printing Process Unveiled: We'll shed light on how 3D printing works for house construction, explaining the different materials used and the advantages of this method compared to traditional building techniques. Building a Better Future: We'll explore the social impact of 3D-printed houses, discussing how they can provide affordable housing solutions, improve disaster relief efforts, and promote sustainable construction practices. Customization at Your Fingertips: Discover the exciting potential for personalization in 3D-printed houses. Imagine designing your dream home with unique layouts and features, all made possible by this revolutionary technology. Living in a 3D-Printed Home: We'll take you inside the experience of living in a 3D-printed house. Get a glimpse into the comfort, functionality, and potential benefits of this new way of living. A Look Ahead: The Future of 3D Printing in Housing: We'll explore the cutting-edge advancements on the horizon for 3D-printed houses. Imagine faster printing times, self-guided robotic systems, and houses that can even adapt or "grow" over time. Whether you're a homeowner, architect, or simply curious about the future of construction, this guide provides valuable insights into the world of 3D-printed houses. Join us as we explore the potential of this technology to revolutionize the way we build and live.
Download or read book Industry 4 0 Shaping The Future of The Digital World written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2020-10-28 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The City of Manchester, once the birthplace of the 1st Industrial Revolution, is today a pioneering hub of the 4th Industrial Revolution (Industry 4.0), offering Industry 4.0 solutions in advanced materials, engineering, healthcare and social sciences. Indeed, the creation of some of the city’s greatest academic institutions was a direct outcome of the industrial revolution, so it was something of a homecoming that the Sustainable Smart Manufacturing (S2M) Conference was hosted by The University of Manchester in 2019. The conference was jointly organised by The University of Manchester, The University of Lisbon and The Polytechnic of Leiria – the latter two bringing in a wealth of expertise in how Industry 4.0 manifests itself in the context of sustainably evolving, deeply-rooted cities. S2M-2019 instigated the development of 61 papers selected for publication in this book on areas of Smart Manufacturing, Additive Manufacturing and Virtual Prototyping, Materials for Healthcare Applications and Circular Economy, Design Education, and Urban Spaces.
Download or read book Fabricated written by Hod Lipson and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricated tells the story of 3D printers, humble manufacturing machines that are bursting out of the factory and into schools, kitchens, hospitals, even onto the fashion catwalk. Fabricated describes our emerging world of printable products, where people design and 3D print their own creations as easily as they edit an online document. A 3D printer transforms digital information into a physical object by carrying out instructions from an electronic design file, or 'blueprint.' Guided by a design file, a 3D printer lays down layer after layer of a raw material to 'print' out an object. That's not the whole story, however. The magic happens when you plug a 3D printer into today’s mind-boggling digital technologies. Add to that the Internet, tiny, low cost electronic circuitry, radical advances in materials science and biotech and voila! The result is an explosion of technological and social innovation. Fabricated takes the reader onto a rich and fulfilling journey that explores how 3D printing is poised to impact nearly every part of our lives. Aimed at people who enjoy books on business strategy, popular science and novel technology, Fabricated will provide readers with practical and imaginative insights to the question 'how will this technology change my life?' Based on hundreds of hours of research and dozens of interviews with experts from a broad range of industries, Fabricated offers readers an informative, engaging and fast-paced introduction to 3D printing now and in the future.
Download or read book 3D Concrete Printing Technology written by Tejwant Singh Brar and published by Materials Research Forum LLC. This book was released on 2022-11-05 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a detailed comparison between traditional construction techniques and 3D printing construction. The comparison focuses on four primary parameters: mechanism, composition, time and cost. The operational details of each technology (cast-in situ, pre-stress, post-tension) are reviewed and comparison criteria for all techniques are formulated. In conclusion, 3D printing seems to be well on its way to transform the whole construction industry. Keywords: 3D Concrete Printing, Cast-in-Situ Technology, Pre-Cast Technology, Pre-Stressed Technology, Post-Tension Technology, 3D-Printable Materials, Extrudability, Buildability, Workability, Open Time, Contact Strength between Layers, Aggregates, Water-Cement Ratio, Rheological and Mechanical Properties of 3D Printable Materials, Reinforcement Strategies, Printability Window, Cost Analysis, Green Concrete, Self-Healing Concrete.
