Download or read book 3D Printing and Ubiquitous Manufacturing written by Tin-Chih Toly Chen and published by Springer Nature. This book was released on 2020-06-18 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the applications of 3D printing technologies to ubiquitous manufacturing (UM). UM itself represents an application of ubiquitous computing in the manufacturing sector, and this book reveals how it offers convenient, on-demand network access to a shared pool of configurable manufacturing resources, including software tools, equipment, and capabilities. Given its scope, the book will be of considerable interest to researchers in the areas of manufacturing, mechanical engineering, operations management, production control, ubiquitous computing, and sensor technologies, as well as practicing managers and engineers.
Download or read book A New Industrial Future written by Thomas Birtchnell and published by Routledge. This book was released on 2016-07-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Industrial Future? examines whether a further industrial revolution is taking place around the world. In this compelling book Birtchnell and Urry examine such a new possible future involving the mass adoption of 3D printing. The locating of 3D printers in homes, offices, stores and workshops would disrupt existing systems and pose novel challenges for incumbents. The book drawing upon expert interviews, scenario workshops and various case studies assesses the potential future of global manufacturing, freight transport, world trade and land use. It offers the first book-length social scientific analysis of the character and impacts of a new system of manufacturing that is in formation. The book will be of interest to urban planners, policy makers, social scientists, futurologists, economists, as well as general readers by offering inquiry on this future upheaval in the means of production.
Download or read book 3D Printing Technology and Its Diverse Applications written by H. B. Muralidhara and published by CRC Press. This book was released on 2021-12-22 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume explores the exciting and diverse applications of three-dimensional printing in a variety of industries, including food processing, environmental sciences, biotechnology, medical devices, energy storage, civil engineering, the textile and fashion industry, and more. It describes the various 3D printing methods, the commonly used materials, and the pros and cons. It also presents an overview of the historical development and modern-day trends in additive manufacturing, as well as an exploration of the prospects of 3D printing technology in promoting academic education.
Download or read book Fabricated written by Hod Lipson and published by John Wiley & Sons. This book was released on 2013-01-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabricated tells the story of 3D printers, humble manufacturing machines that are bursting out of the factory and into schools, kitchens, hospitals, even onto the fashion catwalk. Fabricated describes our emerging world of printable products, where people design and 3D print their own creations as easily as they edit an online document. A 3D printer transforms digital information into a physical object by carrying out instructions from an electronic design file, or 'blueprint.' Guided by a design file, a 3D printer lays down layer after layer of a raw material to 'print' out an object. That's not the whole story, however. The magic happens when you plug a 3D printer into today’s mind-boggling digital technologies. Add to that the Internet, tiny, low cost electronic circuitry, radical advances in materials science and biotech and voila! The result is an explosion of technological and social innovation. Fabricated takes the reader onto a rich and fulfilling journey that explores how 3D printing is poised to impact nearly every part of our lives. Aimed at people who enjoy books on business strategy, popular science and novel technology, Fabricated will provide readers with practical and imaginative insights to the question 'how will this technology change my life?' Based on hundreds of hours of research and dozens of interviews with experts from a broad range of industries, Fabricated offers readers an informative, engaging and fast-paced introduction to 3D printing now and in the future.
Download or read book 3D Printing for Energy Applications written by Albert Tarancón and published by John Wiley & Sons. This book was released on 2021-04-13 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D PRINTING FOR ENERGY APPLICATIONS Explore current and future perspectives of 3D printing for the fabrication of high value-added complex devices 3D Printing for Energy Applications delivers an insightful and cutting-edge exploration of the applications of 3D printing to the fabrication of complex devices in the energy sector. The book covers aspects related to additive manufacturing of functional materials with applicability in the energy sector. It reviews both the technology of printable materials and 3D printing strategies itself, and its use in energy devices or systems. Split into three sections, the book covers the 3D printing of functional materials before delving into the 3D printing of energy devices. It closes with printing challenges in the production of complex objects. It also presents an interesting perspective on the future of 3D printing of complex devices. Readers will also benefit from the inclusion of: A thorough introduction to 3D printing of functional materials, including metals, ceramics, and composites An exploration of 3D printing challenges for production of complex objects, including computational design, multimaterials, tailoring AM components, and volumetric additive manufacturing Practical discussions of 3D printing of energy devices, including batteries, supercaps, solar panels, fuel cells, turbomachinery, thermoelectrics, and CCUS Perfect for materials scientists, 3D Printing for Energy Applications will also earn a place in the libraries of graduate students in engineering, chemistry, and material sciences seeking a one-stop reference for current and future perspectives on 3D printing of high value-added complex devices.
Download or read book 3D Printing as a Direct Manufacturing Technology A Scenario Analysis of Potential Future B to C Market Constellations written by Jens Lammert and published by GRIN Verlag. This book was released on 2016-02-23 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bachelor Thesis from the year 2015 in the subject Business economics - Trade and Distribution, grade: 2,4, Rhine-Waal University of Applied Sciences (Faculty of Communication and Environment), language: English, abstract: 3D printing technology recently receives much attention in mass media. While it is sometimes entitled as a technology that can bring a third industrial revolution it is not to deny that it will have huge influence on traditional manufacturing. Furthermore this technology comes along with a huge disruptive character since it nowadays demonstrates its potential for the future of consumers. The dissemination of personal 3D printers and further 3D printing technologies involves a variety of opportunities and challenges. This thesis analyses the implications of 3D printing technologies on the B-to-C market focusing on possible future market constellations and conflict situations using the instrument of scenario technique in order to think ahead the future of the depicted area.
Download or read book Additive Manufacturing and 3D Printing Technology written by G. K. Awari and published by CRC Press. This book was released on 2021-02-10 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing and 3D Printing Technology: Principles and Applications consists of the construction and working details of all modern additive manufacturing and 3D-printing technology processes and machines, while also including the fundamentals, for a well-rounded educational experience. The book is written to help the reader understand the fundamentals of the systems. This book provides a selection of additive manufacturing techniques suitable for near-term application with enough technical background to understand the domain, its applicability, and to consider variations to suit technical and organizational constraints. It highlights new innovative 3D-printing systems, presents a view of 4D printing, and promotes a vision of additive manufacturing and applications toward modern manufacturing engineering practices. With the block diagrams, self-explanatory figures, chapter exercises, and photographs of lab-developed prototypes, along with case studies, this new textbook will be useful to students studying courses in Mechanical, Production, Design, Mechatronics, and Electrical Engineering.
Download or read book 3D Printing written by John M. Jordan and published by MIT Press. This book was released on 2019-03-12 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible introduction to 3D printing that outlines the additive manufacturing process, industrial and household markets, and emerging uses. The use of 3D printing—digitally controlled additive manufacturing—is growing rapidly. Consumer models of 3D printers allow people to fabricate small plastic objects, from cabinet knobs to wedding cake toppers. Industrial uses are becoming widespread, as businesses use the technology to fabricate prototypes, spare parts, custom-fitted prosthetics, and other plastic or metal items, often at lower cost and with greater efficiency than standard manufacturing. In this volume in the MIT Press Essential Knowledge series, John Jordan offers an accessible introduction to 3D printing, describing the printing process, industrial and household markets, and emerging uses. Jordan outlines the stages of 3D printing, from idea to software model to a printable file that slices the planned object into printable layers to the finished object itself. He describes additive technologies, consumer 3D printing in homes and schools, mass customization (which can create tens of millions of unique items), and industrial uses. Jordan explains that although 3D printers have not become the ubiquitous home appliance once predicted, they are making inroads into mass markets; and he discusses the business factors that may hinder industry adoption of 3D printing technologies. He considers the possible unintended consequences of 3D printing on jobs, as companies scramble to find employees with an uncommon skill set; on business models and supply chains, as manufacturing is decentralized; and on patent law, as machines can be programmed to copy protected property. Finally, Jordan looks at new and emerging uses, including bioprinting, building construction, and micromachines.
Download or read book The Business of Additive Manufacturing written by Harm-Jan Steenhuis and published by Taylor & Francis. This book was released on 2023-09-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although additive manufacturing (AM), also known as 3D printing, has been around for almost 40 years, few people know how it actually works and the huge impact and benefits it offers. This book explains what AM is, using business theories to explain and illustrate why AM is increasingly being used across industries. The book translates complex engineering technology into relevant managerial terminology, using real-world examples from industries such as apparel, construction and transportation. It provides an introduction into the technical background of AM before expanding on the applications, opportunities and challenges to business models. Offering a unique managerial perspective, this book is aimed primarily at a scholarly audience and those researching across business disciplines, including technology management, manufacturing, production and operations management. It can also be used in emerging business courses on AM.
Download or read book Incredible Projects Using 3D Printing written by Joe Greek and published by The Rosen Publishing Group, Inc. This book was released on 2014-12-15 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Though they may sound like something out of science fiction, 3-D printers are not only real but also increasingly common. Popular with both the Maker Movement and businesses, the 3-D printer has multiple uses. It’s great for making prototypes and creating cool projects. Some experts even believe that additive manufacturing—or 3-D printing on the industrial level—is the wave of the future. Readers will learn about a variety of 3-D printing methods, weigh the pros and cons of 3-D printing, and discover 3-D printing’s applications in fields as diverse as fashion, food, and medicine.
Download or read book 3d Printing And Additive Manufacturing Principles And Applications Fifth Edition Of Rapid Prototyping written by Chee Kai Chua and published by World Scientific Publishing Company. This book was released on 2016-11-29 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing (AM) technologies are developing impressively and are expected to bring about the next revolution. AM is gradually replacing traditional manufacturing methods in some applications because of its unique properties of customisability and versatility. This book provides a very comprehensive and updated text about different types of AM technologies, their respective advantages, shortcomings and potential applications.3D Printing and Additive Manufacturing: Principles and Applications is a comprehensive textbook that takes readers inside the world of additive manufacturing. This book introduces the different types of AM technologies, categorised by liquid, solid and powder-based AM systems, the common standards, the trends in the field and many more.Easy to understand, this book is a good introduction to anyone interested in obtaining a better understanding of AM. For people working in the industry, this book will provide information on new methods and practices, as well as recent research and development in the field. For professional readers, this book provides a comprehensive guide to distinguish between the different technologies, and will help them make better decisions regarding which technology they should use. For the general public, this book sheds some light on the fast-moving AM field.In this edition, new AM standards (e.g. Standard of Terminology and Classification of AM systems) and format standards will be included, Furthermore, the listing of new machines and systems, materials, and software; as well as new case studies and applications in industries that have recently adopted AM (such as the Marine and Offshore industry) have also been incorporated.
Download or read book 3D printing and the intellectual property system written by World Intellectual Property Organization and published by WIPO. This book was released on 2015 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-dimensional (3D) printing – or “additive manufacturing” – technologies differ from traditional molding and casting manufacturing processes in that they build 3D objects by successively creating layers of material on top of each other. Rooted in manufacturing research of the 1980s, 3D printing has evolved into a broad set of technologies that could fundamentally alter production processes in a wide set of technology areas. This report investigates, from the perspective of an intellectual property scholar, how 3D printing technology has developed over the last few decades, how intellectual property rights have shaped this breakthrough innovation and how 3D printing technologies could challenge the intellectual property rights system in the future.
Download or read book 3D Printing For Dummies written by Richard Horne and published by John Wiley & Sons. This book was released on 2017-05-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling book on 3D printing 3D printing is one of the coolest inventions we've seen in our lifetime, and now you can join the ranks of businesspeople, entrepreneurs, and hobbyists who use it to do everything from printing foods and candles to replacement parts for older technologies—and tons of mind-blowing stuff in between! With 3D Printing For Dummies at the helm, you'll find all the fast and easy-to-follow guidance you need to grasp the methods available to create 3D printable objects using software, 3D scanners, and even photographs through open source software applications like 123D Catch. Thanks to the growing availability of 3D printers, this remarkable technology is coming to the masses, and there's no time like the present to let your imagination run wild and actually create whatever you dream up—quickly and inexpensively. When it comes to 3D printing, the sky's the limit! Covers each type of 3D printing technology available today: stereolithology, selective sintering, used deposition, and granular binding Provides information on the potential for the transformation of production and manufacturing, reuse and recycling, intellectual property design controls, and the commoditization of products Walks you through the process of creating a RepRap printer using open source designs, software, and hardware Offers strategies for improved success in 3D printing On your marks, get set, innovate!
Download or read book 3d Printing And Additive Manufacturing Of Electronics Principles And Applications written by Chee Kai Chua and published by World Scientific. This book was released on 2021-05-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)
Download or read book 3D Printing Breakthroughs in Research and Practice written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-10-06 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of modern technology has allowed for impressive developments in manufacturing processes. Out of these developments, 3D printing has emerged as a new method. 3D Printing: Breakthroughs in Research and Practice is a comprehensive reference source for the latest research and advances on 3D printing processes, technologies, and methods. Highlighting emerging perspectives on manufacturing and industrial applications, this book is ideally designed for professionals, practitioners, students, and researchers interested in the latest developments and uses of 3D printing.
Download or read book Sustainability for 3D Printing written by Kamalpreet Sandhu and published by Springer Nature. This book was released on 2021-08-31 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: With advancement in modern technology human life span in 21st century has significantly improved as compared to past centuries. Indeed, the manufacturing and household wastes have also boosted in the same era, presenting a hazardous condition to the various living beings. However, through smart methodologies, it can be possible to recycle/reuse of the different types of wastes as a feedstock convenient for specialized manufacturing technologies, such as 3D printing. This means that through proper facilities the waste can be used as the raw material for the printing technologies with characteristic at par with the virgin feedstock. Furthermore, producing the feedstock using waste materials will help to reduce the cost of the processing material, productivity and eco-friendliness of this manufacturing technology. This book will cover a boarder aspect of such efforts wherein various applications and state of art solutions will be discussed in a comprehensive way. This book will be much interest for academics, research and entrepreneur who are working in the field materials science, 3D printing, and manufacturing because of its coverage of state of art solution in the field of commercial, industrial and healthcare products.
Download or read book 3D Printing written by Melissa Koch and published by Twenty-First Century Books (Tm). This book was released on 2017-08 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food, candy, toys, clothing, shoes, houses, cars, prosthetics...you name it, 3D printing can make it all! Learn about 3D printing technologies and materials, intellectual property challenges, environmental concerns, and much more.