Download or read book Brittle Materials in Mechanical Extremes written by Giovanni Bruno and published by MDPI. This book was released on 2021-06-18 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of the Special Issue “Brittle Materials in Mechanical Extremes” is to spark a discussion of the analogies and the differences between different brittle materials, such as ceramics and concrete. The contributions to the Issue span from construction materials (asphalt and concrete) to structural ceramics to ice. Data reported in the Issue were obtained by advanced microstructural techniques (microscopy, 3D imaging, etc.) and linked to mechanical properties (and their changes as a function of aging, composition, etc.). The description of the mechanical behavior of brittle materials under operational loads, for instance, concrete and ceramics under very high temperatures, offers an unconventional viewpoint on the behavior of such materials. While it is by no means exhaustive, this Special Issue paves the road for the fundamental understanding and further development of materials.

Download or read book Short Fibre Reinforced Cementitious Composites and Ceramics written by Heiko Herrmann and published by Springer. This book was released on 2019-01-11 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume shines a new light on short fibre reinfoced cementitious composites and particle reinforced ceramics. It offers insight from various disciplines like civil engineering, material sciences and micro-mechanics, and collects 9 experimental, numerical and theoretical studies written by top researchers in composite concrete science. The book presents the outcome of the EUROMECH 582 colloquium “Short Fibre Reinfoced Cementitious Composites and Ceramics” held 20 – 22 March 2017, Tallinn, Estonia.

Download or read book Sustainable Fiber Reinforced Cementitious Composites for Construction and Building Materials written by Li Li and published by Frontiers Media SA. This book was released on 2023-07-26 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geological Disasters in Deep Engineering Mechanism Warning and Risk Mitigation Volume II written by Guang-Liang Feng and published by Frontiers Media SA. This book was released on 2023-10-26 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High performance Hybrid fibre Concrete written by Ivan Marković and published by IOS Press. This book was released on 2006 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the research project presented in this PhD-thesis, an innovative type of fibre concrete is developed, with improved both the tensile strength and the ductility: the Hybrid-Fibre Concrete (HFC). The expression "Hybrid" refers to the "hybridisation" of fibres: short and long steel fibres were combined together in one concrete mixture. This is opposite to conventional steel fibre concretes, which contain only one type of fibre. The basic goal of combining short and long fibres is from one side to improve the tensile strength by the action of short fibres, and from the other side to improve the ductility by the action of long fibres." "In this research project, all important aspects needed for the development and application of Hybrid-Fibre Concrete have been considered. In total 15 mixtures, with different types and amounts of steel fibres were developed and tested in the fresh state (workability) as well as in the hardened state (uniaxial tensile tests, flexural tests, pullout tests of single fibres and compressive tests). A new analytical model for bridging of cracks by fibres was developed and successfully implemented for tensile softening response of HFC. At the end, the utilisation of HFC in the engineering practice was discussed, including a case-study on light prestressed long-span beams made of HFC."--BOOK JACKET.

Download or read book Concrete at High Temperatures written by Zdeněk P. Bažant and published by Prentice Hall. This book was released on 1996 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increased use of concrete in high temperature environments, it is essential for engineers to have a knowledge of the properties and mathematical modelling of concrete in such extreme conditions. Bringing together, for the first time, vast amounts of data previously scattered throughout numerous papers and periodicals, this book provides, in two parts, a comprehensive and systematic review of both the properties and the mathematical modelling of concrete at high temperatures. Part I provides a comprehensive description of the material properties of concrete at high temperatures. Assuming only a basic knowledge of mathematics, the information is presented at an elementary level suitable for graduates of civil engineering or materials science. Part II describes the response of concrete to high temperatures in precise terms based on mathematical modelling of physical processes. Suitable for advanced graduate students, researchers and specialists, it presents detailed mathematical models of phenomena such as heat transfer, moisture diffusion, creep, volume changes, cracking and fracture. Concrete at High Temperatures will prove a valuable reference source to university researchers and graduate students in civil engineering and materials science, engineers in research laboratories, and practising engineers concerned with fire resistance, concrete structures for nuclear reactors and chemical technology vessels.

Download or read book Strain Hardening Cement Based Composites written by Viktor Mechtcherine and published by Springer. This book was released on 2017-09-04 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the proceedings of the 4th International Conference on Strain-Hardening Cement-Based Composites (SHCC4), that was held at the Technische Universität Dresden, Germany from 18 to 20 September 2017. The conference focused on advanced fiber-reinforced concrete materials such as strain-hardening cement-based composites (SHCC), textile-reinforced concrete (TRC) and high-performance fiber-reinforced cement-based composites (HPFRCC). All these new materials exhibit pseudo-ductile behavior resulting from the formation of multiple, fine cracks when subject to tensile loading. The use of such types of fiber-reinforced concrete could revolutionize the planning, development, dimensioning, structural and architectural design, construction of new and strengthening and repair of existing buildings and structures in many areas of application. The SHCC4 Conference was the follow-up of three previous successful international events in Stellenbosch, South Africa in 2009, Rio de Janeiro, Brazil in 2011, and Dordrecht, The Netherlands in 2014.

Download or read book Bond in Concrete written by Peter Bartos and published by . This book was released on 1982 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Textile Reinforced Cement Composites written by Jan Wastiels and published by MDPI. This book was released on 2020-03-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue presents the latest advances in the field of Textile-Reinforced Cement Composites, including Textile-Reinforced Concrete (TRC), Textile-Reinforced Mortar (TRM), Fabric-Reinforced Cementitious Matrix (FRCM), etc. These composite materials distinguish themselves from other fibre-reinforced concrete materials by their strain-hardening behaviour under tensile loading. This Special Issue is composed of 14 papers covering new insights in structural and material engineering. The papers include investigations on the level of the fibre reinforcement system as well as on the level of the composites, investigating their impact and fatigue behaviour, durability and fire behaviour. Both the strengthening of existing structures and the development of new structural systems such as lightweight sandwich systems are presented, and analysis and design methods are discussed. This Special Issue demonstrates the broadness and intensity of the ongoing advancements in the field of Textile-Reinforced Cement composites and the importance of several future research directions.

Download or read book Basic Principles of Concrete Structures written by Xianglin Gu and published by Springer. This book was released on 2015-12-09 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the latest version of designing codes both for buildings and bridges (GB50010-2010 and JTG D62-2004), this book starts from steel and concrete materials, whose properties are very important to the mechanical behavior of concrete structural members. Step by step, analysis of reinforced and prestressed concrete members under basic loading types (tension, compression, flexure, shearing and torsion) and environmental actions are introduced. The characteristic of the book that distinguishes it from other textbooks on concrete structures is that more emphasis has been laid on the basic theories of reinforced concrete and the application of the basic theories in design of new structures and analysis of existing structures. Examples and problems in each chapter are carefully designed to cover every important knowledge point. As a basic course for undergraduates majoring in civil engineering, this course is different from either the previously learnt mechanics courses or the design courses to be learnt. Compared with mechanics courses, the basic theories of reinforced concrete structures cannot be solely derived by theoretical analysis. And compared with design courses, this course emphasizes the introduction of basic theories rather than simply being a translation of design specifications. The book will focus on both the theoretical derivations and the engineering practices.

Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

Download or read book High performance Construction Materials written by Caijun Shi and published by World Scientific. This book was released on 2008 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a number of high-performance construction materials, including concrete, steel, fiber-reinforced cement, fiber-reinforced plastics, polymeric materials, geosynthetics, masonry materials and coatings. It discusses the scientific bases for the manufacture and use of these high-performance materials. Testing and application examples are also included, in particular the application of relatively new high-performance construction materials to design practice.Most books dealing with construction materials typically address traditional materials only rather than high-performance materials and, as a consequence, do not satisfy the increasing demands of today''s society. On the other hand, books dealing with materials science are not engineering-oriented, with limited coverage of the application to engineering practice. This book is thus unique in reflecting the great advances made on high-performance construction materials in recent years.This book is appropriate for use as a textbook for courses in engineering materials, structural materials and civil engineering materials at the senior undergraduate and graduate levels. It is also suitable for use by practice engineers, including construction, materials, mechanical and civil engineers.

Download or read book X ray Tomography in Material Science written by José Baruchel and published by Hermes Science Publications. This book was released on 2000 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: How materials behave under different conditions is key information for structural and mechanical engineers. The authors of this book show how X-Ray tomography can be used as a very powerful tool to investigate the microstructure and behavior of structural materials such as A1 and Ti based metal matrix composites, aluminum alloys and foams. The authors describe the technique and introduce the algorithms used for the reconstruction of the 3-D numerical images and illustrate the use of both synchrotron and X-Ray sources.

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Materials written by Michael F. Ashby and published by Butterworth-Heinemann. This book was released on 2013-10-09 with total page 899 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials, Third Edition, is the essential materials engineering text and resource for students developing skills and understanding of materials properties and selection for engineering applications. This new edition retains its design-led focus and strong emphasis on visual communication while expanding its inclusion of the underlying science of materials to fully meet the needs of instructors teaching an introductory course in materials. A design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications. Highly visual full color graphics facilitate understanding of materials concepts and properties. For instructors, a solutions manual, lecture slides, online image bank, and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com. The number of worked examples has been increased by 50% while the number of standard end-of-chapter exercises in the text has been doubled. Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology. The text meets the curriculum needs of a wide variety of courses in the materials and design field, including introduction to materials science and engineering, engineering materials, materials selection and processing, and materials in design. - Design-led approach motivates and engages students in the study of materials science and engineering through real-life case studies and illustrative applications - Highly visual full color graphics facilitate understanding of materials concepts and properties - Chapters on materials selection and design are integrated with chapters on materials fundamentals, enabling students to see how specific fundamentals can be important to the design process - For instructors, a solutions manual, lecture slides, online image bank and materials selection charts for use in class handouts or lecture presentations are available at http://textbooks.elsevier.com - Links with the Cambridge Engineering Selector (CES EduPack), the powerful materials selection software. See www.grantadesign.com for information NEW TO THIS EDITION: - Text and figures have been revised and updated throughout - The number of worked examples has been increased by 50% - The number of standard end-of-chapter exercises in the text has been doubled - Coverage of materials and the environment has been updated with a new section on Sustainability and Sustainable Technology

Download or read book Ultra High Performance Concrete UHPC written by Ekkehard Fehling and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since. Ultra high performance concrete (UHPC) is a milestone in concrete technology and application. It permits the construction of both more slender and more durable concrete structures with a prolonged service life and thus improved sustainability. This book is a comprehensive overview of UHPC - from the principles behind its production and its mechanical properties to design and detailing aspects. The focus is on the material behaviour of steel fibre-reinforced UHPC. Numerical modelling and detailing of the connections with reinforced concrete elements are featured as well. Numerous examples worldwide - bridges, columns, facades and roofs - are the basis for additional explanations about the benefits of UHPC and how it helps to realise several architectural requirements. The authors are extensively involved in the testing, design, construction and monitoring of UHPC structures. What they provide here is therefore a unique synopsis of the state of the art with a view to practical applications.

Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques.Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete.With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. - Provides a review of concrete deterioration and damage - Discusses condition assessment and repair techniques, standards and guidelines