Download or read book Morphing Wing Technologies written by Sergio Ricci and published by Butterworth-Heinemann. This book was released on 2017-10-27 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Morphing Wings Technologies: Large Commercial Aircraft and Civil Helicopters offers a fresh look at current research on morphing aircraft, including industry design, real manufactured prototypes and certification. This is an invaluable reference for students in the aeronautics and aerospace fields who need an introduction to the morphing discipline, as well as senior professionals seeking exposure to morphing potentialities. Practical applications of morphing devices are presented—from the challenge of conceptual design incorporating both structural and aerodynamic studies, to the most promising and potentially flyable solutions aimed at improving the performance of commercial aircraft and UAVs. Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing mission environment during flight. The book consists of eight sections as well as an appendix which contains both updates on main systems evolution (skin, structure, actuator, sensor, and control systems) and a survey on the most significant achievements of integrated systems for large commercial aircraft. - Provides current worldwide status of morphing technologies, the industrial development expectations, and what is already available in terms of flying systems - Offers new perspectives on wing structure design and a new approach to general structural design - Discusses hot topics such as multifunctional materials and auxetic materials - Presents practical applications of morphing devices

Download or read book Mechanisms Transmissions and Applications written by Mehmet Ismet Can Dede and published by Springer. This book was released on 2017-06-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of MeTrApp 2017, the 4th Conference on Mechanisms, Transmissions and Applications, that was held in Trabzon, Turkey, July 3-5, 2017. The topics treated in this volume are Mechanism Design, Parallel Manipulators, Control Applications, Mechanical Transmissions, Cam Mechanisms, and Dynamics of Machinery. The conference was organised by the IFToMM Technical Committees for “Linkages and Mechanical Controls” and “Gearing and Transmissions” under the patronage of the IFToMM and sponsorship of Karadeniz Technical University, Izmir Institute of Technology and IFToMM Turkey (MAKTED). The aim of the conference was to bring together researchers, scientists, industry experts and students to provide, in a friendly and stimulating environment, the opportunity to exchange know-how and promote collaboration in the field of Mechanism and Machine Science.

Download or read book 2023 Asia Pacific International Symposium on Aerospace Technology APISAT 2023 Proceedings written by Song Fu and published by Springer Nature. This book was released on with total page 1991 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Engineering And Automation Proceedings Of The International Conference On Electrical Engineering And Automation Eea2016 written by Xiaoxing Zhang and published by World Scientific. This book was released on 2017-04-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th-26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring.The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.

Download or read book Material Integrated Intelligent Systems written by Stefan Bosse and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining different perspectives from materials science, engineering, and computer science, this reference provides a unified view of the various aspects necessary for the successful realization of intelligent systems. The editors and authors are from academia and research institutions with close ties to industry, and are thus able to offer first-hand information here. They adopt a unique, three-tiered approach such that readers can gain basic, intermediate, and advanced topical knowledge. The technology section of the book is divided into chapters covering the basics of sensor integration in materials, the challenges associated with this approach, data processing, evaluation, and validation, as well as methods for achieving an autonomous energy supply. The applications part then goes on to showcase typical scenarios where material-integrated intelligent systems are already in use, such as for structural health monitoring and smart textiles.

Download or read book Advances in Energy and Control Systems written by Afzal Sikander and published by Springer Nature. This book was released on with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shape Memory Alloy Engineering written by Antonio Concilio and published by Elsevier. This book was released on 2014-09-25 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape Memory Alloy Engineering introduces materials, mechanical, and aerospace engineers to shape memory alloys (SMAs), providing a unique perspective that combines fundamental theory with new approaches to design and modeling of actual SMAs as compact and inexpensive actuators for use in aerospace and other applications. With this book readers will gain an understanding of the intrinsic properties of SMAs and their characteristic state diagrams, allowing them to design innovative compact actuation systems for applications from aerospace and aeronautics to ships, cars, and trucks. The book realistically discusses both the potential of these fascinating materials as well as their limitations in everyday life, and how to overcome some of those limitations in order to achieve proper design of useful SMA mechanisms. Discusses material characterization processes and results for a number of newer SMAs Incorporates numerical (FE) simulation and integration procedures into commercial codes (Msc/Nastran, Abaqus, and others) Provides detailed examples on design procedures and optimization of SMA-based actuation systems for real cases, from specs to verification lab tests on physical demonstrators One of the few SMA books to include design and set-up of demonstrator characterization tests and correlation with numerical models

Download or read book Discrete Time Sliding Mode Protocols for Discrete Multi Agent System written by Keyurkumar Patel and published by Springer Nature. This book was released on 2020-08-27 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents few novel Discrete-time Sliding Mode (DSM) protocols for leader-following consensus of Discrete Multi-Agent Systems (DMASs). The protocols intend to achieve the consensus in finite time steps and also tackle the corresponding uncertainties. Based on the communication graph topology of multi-agent systems, the protocols are divided into two groups, namely (i) Fixed graph topology and (ii) Switching graph topology. The coverage begins with the design of Discrete-time Sliding Mode (DSM) protocols using Gao’s reaching law and power rate reaching law for the synchronization of linear DMASs by using the exchange of information between the agents and the leader to achieve a common goal. Then, in a subsequent chapter, analysis for no. of fixed-time steps required for the leader-following consensus is presented. The book also includes chapters on the design of Discrete-time Higher-order Sliding Mode (DHSM) protocols, Event-triggered DSM protocols for the leader-following consensus of DMASs. A chapter is also included on the design of DHSM protocols for leader-following consensus of heterogeneous DMASs. Special emphasis is given to the practical implementation of each proposed DSM protocol for achieving leader-following consensus of helicopter systems, flexible joint robotic arms, and rigid joint robotic arms. This book offers a ready reference guide for graduate students and researchers working in the areas of control, automation, and communication engineering, and in particular the cooperative control of multi-agent systems. It will also benefit professional engineers working to design and implement robust controllers for power systems, autonomous vehicles, military surveillance, smartgrids/microgrids, vehicle traffic management, robotic teams, and aerial robots.

Download or read book Adaptive Structures written by David Wagg and published by John Wiley & Sons. This book was released on 2008-04-09 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive structures have the ability to adapt, evolve or change their properties or behaviour in response to the environment around them. The analysis and design of adaptive structures requires a highly multi-disciplinary approach which includes elements of structures, materials, dynamics, control, design and inspiration taken from biological systems. Development of adaptive structures has been taking place in a wide range of industrial applications, but is particularly advanced in the aerospace and space technology sector with morphing wings, deployable space structures; piezoelectric devices and vibration control of tall buildings. Bringing together some of the foremost world experts in adaptive structures, this unique text: includes discussions of the application of adaptive structures in the aerospace, military, civil engineering structures, automotive and MEMS. presents the impact of biological inspiration in designing adaptive structures, particularly the use of hierarchy in nature, which typically induces multi-functional behavior. sets the agenda for future research in adaptive structures in one distinctive single volume. Adaptive Structures: Engineering Applications is essential reading for engineers and scientists working in the fields of intelligent materials, structural vibration, control and related smart technologies. It will also be of interest to senior undergraduate and postgraduate research students as well as design engineers working in the aerospace, mechanical, electrical and civil engineering sectors.

Download or read book Advanced Multicore Systems On Chip written by Abderazek Ben Abdallah and published by Springer. This book was released on 2017-09-10 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: From basic architecture, interconnection, and parallelization to power optimization, this book provides a comprehensive description of emerging multicore systems-on-chip (MCSoCs) hardware and software design. Highlighting both fundamentals and advanced software and hardware design, it can serve as a primary textbook for advanced courses in MCSoCs design and embedded systems. The first three chapters introduce MCSoCs architectures, present design challenges and conventional design methods, and describe in detail the main building blocks of MCSoCs. Chapters 4, 5, and 6 discuss fundamental and advanced on-chip interconnection network technologies for multi and many core SoCs, enabling readers to understand the microarchitectures for on-chip routers and network interfaces that are essential in the context of latency, area, and power constraints. With the rise of multicore and many-core systems, concurrency is becoming a major issue in the daily life of a programmer. Thus, compiler and software development tools are critical in helping programmers create high-performance software. Programmers should make sure that their parallelized program codes will not cause race condition, memory-access deadlocks, or other faults that may crash their entire systems. As such, Chapter 7 describes a novel parallelizing compiler design for high-performance computing. Chapter 8 provides a detailed investigation of power reduction techniques for MCSoCs at component and network levels. It discusses energy conservation in general hardware design, and also in embedded multicore system components, such as CPUs, disks, displays and memories. Lastly, Chapter 9 presents a real embedded MCSoCs system design targeted for health monitoring in the elderly.

Download or read book Airborne Wind Energy written by Roland Schmehl and published by Springer. This book was released on 2018-03-31 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of the latest research and development activities concerning innovative wind energy technologies intended to replace fossil fuels on an economical basis. A characteristic feature of the various conversion concepts discussed is the use of tethered flying devices to substantially reduce the material consumption per installed unit and to access wind energy at higher altitudes, where the wind is more consistent. The introductory chapter describes the emergence and economic dimension of airborne wind energy. Focusing on “Fundamentals, Modeling & Simulation”, Part I includes six contributions that describe quasi-steady as well as dynamic models and simulations of airborne wind energy systems or individual components. Shifting the spotlight to “Control, Optimization & Flight State Measurement”, Part II combines one chapter on measurement techniques with five chapters on control of kite and ground stations, and two chapters on optimization. Part III on “Concept Design & Analysis” includes three chapters that present and analyze novel harvesting concepts as well as two chapters on system component design. Part IV, which centers on “Implemented Concepts”, presents five chapters on established system concepts and one chapter about a subsystem for automatic launching and landing of kites. In closing, Part V focuses with four chapters on “Technology Deployment” related to market and financing strategies, as well as on regulation and the environment. The book builds on the success of the first volume “Airborne Wind Energy” (Springer, 2013), and offers a self-contained reference guide for researchers, scientists, professionals and students. The respective chapters were contributed by a broad variety of authors: academics, practicing engineers and inventors, all of whom are experts in their respective fields.

Download or read book Smart Composites written by Rani Elhajjar and published by CRC Press. This book was released on 2013-12-14 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Composites: Mechanics and Design addresses the current progress in the mechanics and design of smart composites and multifunctional structures. Divided into three parts, it covers characterization of properties, analyses, and design of various advanced composite material systems with an emphasis on the coupled mechanical and non-mechanical behaviors. Part one includes analyses of smart materials related to electrically conductive, magnetostrictive nanocomposites and design of active fiber composites. These discussions include several techniques and challenges in manufacturing smart composites and characterizing coupled properties, as well as the analyses of composite structures at various length and time scales undergoing coupled mechanical and non-mechanical stimuli considering elastic, viscoelastic (and/or viscoplastic), fatigue, and damage behaviors. Part two is dedicated to a higher-scale analysis of smart structures with topics such as piezoelectrically actuated bistable composites, wing morphing design using macrofiber composites, and multifunctional layered composite beams. The analytical expressions for characterization of the smart structures are presented with an attention to practical application. Finally, part three presents recent advances regarding sensing and structural health monitoring with a focus on how the sensing abilities can be integrated within the material and provide continuous sensing, recognizing that multifunctional materials can be designed to both improve and enhance the health-monitoring capabilities and also enable effective nondestructive evaluation. Smart Composites: Mechanics and Design is an essential text for those interested in materials that not only possess the classical properties of stiffness and strength, but also act as actuators under a variety of external stimuli, provide passive and active response to enable structural health monitoring, facilitate advanced nondestructive testing strategies, and enable shape-changing and morphing structures.

Download or read book Smart Structures Theory written by Inderjit Chopra and published by Cambridge University Press. This book was released on 2014 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on smart materials and structures, which are also referred to as intelligent, adaptive, active, sensory, and metamorphic. The ultimate goal is to develop biologically inspired multifunctional materials with the capability to adapt their structural characteristics, monitor their health condition, perform self-diagnosis and self-repair, morph their shape, and undergo significant controlled motion.

Download or read book Progress of Machining Technology written by Fan Rui and published by Trans Tech Publications Ltd. This book was released on 2009-02-20 with total page 747 pages. Available in PDF, EPUB and Kindle. Book excerpt: With Some Topics in Advanced Manufacturing Technology Selected, peer reviewed papers from the 9th International Conference on Progress of Machining Technology, April 25-28, 2009, Kunming, China, ICPMT’09

Download or read book Municipal Solid Waste Management in Asia and the Pacific Islands written by Agamuthu Pariatamby and published by Springer Science & Business Media. This book was released on 2013-09-05 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management issues, technologies and challenges are dynamic. More so, in developing and transitory nations in Asia. This book, written by Asian experts in solid waste management, explores the current situation in Asian countries including Pacific Islands. There are not many technical books of this kind, especially dedicated to this region of the world. The chapters form a comprehensive, coherent investigation in municipal solid waste (MSW) management, including, definitions used, generation, sustainable waste management system, legal framework and impacts on global warming. Several case studies from Asian nations are included to exemplify the real situation experienced. Discussions on MSW policy in these countries and their impacts on waste management and minimization (if any) are indeed an eye-opener. Undoubtedly, this book would be a pioneer in revealing the latest situation in the Asian region, which includes two of the world’s most dynamic nations in the economic growth. It is greatly envisaged to form an excellent source of reference in MSW management in Asia and Pacific Islands. This book will bridge the wide gap in available information between the developed and transitory/developing nations.

Download or read book Pattern Recognition written by Karina Mariela Figueroa Mora and published by Springer Nature. This book was released on 2020-06-17 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 12th Mexican Conference on Pattern Recognition, MCPR 2020, which was due to be held in Morelia, Mexico, in June 2020. The conference was held virtually due to the COVID-19 pandemic. The 31 papers presented in this volume were carefully reviewed and selected from 67 submissions. They were organized in the following topical sections: pattern recognition techniques; image processing and analysis; computer vision; industrial and medical applications of pattern recognition; natural language processing and recognition; artificial intelligence techniques and recognition.

Download or read book Design Modeling and Control of Nanopositioning Systems written by Andrew J. Fleming and published by Springer. This book was released on 2014-05-15 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the complete design cycle of nanopositioning systems, this is the first comprehensive text on the topic. The book first introduces concepts associated with nanopositioning stages and outlines their application in such tasks as scanning probe microscopy, nanofabrication, data storage, cell surgery and precision optics. Piezoelectric transducers, employed ubiquitously in nanopositioning applications are then discussed in detail including practical considerations and constraints on transducer response. The reader is then given an overview of the types of nanopositioner before the text turns to the in-depth coverage of mechanical design including flexures, materials, manufacturing techniques, and electronics. This process is illustrated by the example of a high-speed serial-kinematic nanopositioner. Position sensors are then catalogued and described and the text then focuses on control. Several forms of control are treated: shunt control, feedback control, force feedback control and feedforward control (including an appreciation of iterative learning control). Performance issues are given importance as are problems limiting that performance such as hysteresis and noise which arise in the treatment of control and are then given chapter-length attention in their own right. The reader also learns about cost functions and other issues involved in command shaping, charge drives and electrical considerations. All concepts are demonstrated experimentally including by direct application to atomic force microscope imaging. Design, Modeling and Control of Nanopositioning Systems will be of interest to researchers in mechatronics generally and in control applied to atomic force microscopy and other nanopositioning applications. Microscope developers and mechanical designers of nanopositioning devices will find the text essential reading.