Download or read book 25th Euromicro Conference written by and published by . This book was released on 1999 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Real Time Computing written by Yu-Chu Tian and published by Springer Nature. This book was released on 2022-08-08 with total page 1511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this handbook is to summarize the recent rapidly developed real-time computing technologies, from theories to applications. This handbook benefits the readers as a full and quick technical reference with a high-level historic review of technology, detailed technical descriptions and the latest practical applications. In general, the handbook is divided into three main parts (subjected to be modified): theory, design, and application covering different but not limited to the following topics: - Real-time operating systems - Real-time scheduling - Timing analysis - Programming languages and run-time systems - Middleware systems - Design and analysis tools - Real-time aspects of wireless sensor networks - Energy aware real-time methods

Download or read book Software Defined Radio written by Walter H.W. Tuttlebee and published by John Wiley & Sons. This book was released on 2006-02-24 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impending advent of GSM in the early 1990s triggered massive investment that revolutionised the capability of DSP technology. A decade later, the vastly increased processing requirements and potential market of 3G has triggered a similar revolution, with a host of start-up companies claiming revolutionary technologies hoping to challenge and displace incumbent suppliers. This book, with contributions from today's major players and leading start-ups, comprehensively describes both the new approaches and the responses of the incumbents, with detailed descriptions of the design philosophy, architecture, technology maturity and software support. Analysis of SDR baseband processing requirements of cellular handsets and basestations 3G handset baseband - ASIC, DSP, parallel processing, ACM and customised programmable architectures 3G basestation baseband - DSP (including co-processors), FPGA-based approaches, reconfigurable and parallel architectures Architecture optimisation to match 3G air interface and application algorithms Evolution of existing DSP, ASIC & FPGA solutions Assessment of the architectural approaches and the implications of the trends. An essential resource for the 3G product designer, who needs to understand immediate design options within a wider context of future product roadmaps, the book will also benefit researchers and commercial managers who need to understand this rapid evolution of baseband signal processing and its industry impact.

Download or read book Rough Sets written by Lech Polkowski and published by Springer. This book was released on 2017-06-22 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set LNAI 10313 and LNAI 10314 constitutes the proceedings of the International Joint Conference on Rough Sets, IJCRS 2017, held in Olsztyn, Poland, in July 2017. The 74 revised full papers presented together with 16 short papers and 16 invited talks, were carefully reviewed and selected from 130 submissions. The papers in this two set-volume of IJCRS 2017 follow the track already rutted by RSCTC and JRS conferences which aimed at unification of many facets of rough set theory from theoretical aspects of the rough set idea bordering on theory of concepts and going through algebraic structures, topological structures, logics for uncertain reasoning, decision algorithms, relations to other theories of vagueness and ambiguity, then to extensions of the rough set idea like granular structures, rough mereology, and to applications of the idea in diverse fields of applied science including hybrid methods like rough-fuzzy, neuro-rough, neuro-rough-fuzzy computing. IJCRS 2017 encompasses topics spread among four main tracks: Rough Sets and Data Science (in relation to RSCTC series organized since 1998); Rough Sets and Granular Computing (in relation to RSFDGrC series organized since 1999); Rough Sets and Knowledge Technology (in relation to RSKT series organized since 2006); and Rough Sets and Intelligent Systems (in relation to RSEISP series organized since 2007).

Download or read book Embedded Processor Design Challenges written by Ed F. Deprettere and published by Springer. This book was released on 2003-07-31 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to give an introduction to and an overview of sta- of-the-art techniques in the design of complex embedded systems. The book title is SAMOS for two major reasons. First, it tries to focus on the actual distinct, yet important problem ?elds of System-Level design of embedded systems, including mapping techniques and synthesis,Architectural design,Modeling issues such as speci?cation languages, formal models, and- nallySimulation. The second reason is that the volume includes a number of papers presented at a workshop with the same name on the Island of Samos, Greece, in July 2001. In order to receive international attention, a number of reputed researchers were invited to this workshop to present their current work. Participation was by invitation only. For the volume presented here, a number of additional papers where selected based on a call for papers. All contributions were refereed. This volume presents a selection of 18 of the refereed papers, including 2 invited papers. The textbook is organized according to four topics: The ?rst isA)System- LevelDesignandSimulation.Inthissection,wepresentacollectionofpapers that give an overview of the challenging goal to design and explore alternatives of embedded system implementations at the system-level. One paper gives an overview of models and tools used in system-level design. The other papers present new models to describe applications, provide models for re?nement and design space exploration, and for tradeo? analysis between cost and ?exibility of an implementation.

Download or read book Real time Systems Scheduling 1 written by Maryline Chetto and published by John Wiley & Sons. This book was released on 2014-11-17 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time systems are used in a wide range of applications, including control, sensing, multimedia, etc. Scheduling is a central problem for these computing/communication systems since responsible of software execution in a timely manner. This book provides state of knowledge in this domain with special emphasis on the key results obtained within the last decade. This book addresses foundations as well as the latest advances and findings in Real-Time Scheduling, giving all references to important papers. But nevertheless the chapters will be short and not overloaded with confusing details. Coverage includes scheduling approaches for mono-core as well as multi-core platforms, dependent tasks, networks, and notably very tremendous recent advances in scheduling of energy constrained embedded systems. Other sophisticated issues such as feedback control scheduling and timing analysis of critical applications are also addressed. This volume can serve as a textbook for courses on the topic in bachelor and in more advanced master programs. It also provides a reference for computer scientists and engineers involved in the design or the development of Cyber-Physical Systems which require up-to-date real-time scheduling solutions.

Download or read book Euro Par 2024 Parallel Processing written by Jesus Carretero and published by Springer Nature. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Performance Embedded Computing written by Luis Miguel Pinho and published by CRC Press. This book was released on 2022-09-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the prevalence of computing systems in our lives is so ubiquitous that we live in a cyber-physical world dominated by computer systems, from pacemakers to cars and airplanes. These systems demand for more computational performance to process large amounts of data from multiple data sources with guaranteed processing times. Actuating outside of the required timing bounds may cause the failure of the system, being vital for systems like planes, cars, business monitoring, e-trading, etc. High-Performance and Time-Predictable Embedded Computing presents recent advances in software architecture and tools to support such complex systems, enabling the design of embedded computing devices which are able to deliver high-performance whilst guaranteeing the application required timing bounds. Technical topics discussed in the book include:  Parallel embedded platforms Programming models Mapping and scheduling of parallel computations Timing and schedulability analysis Runtimes and operating systemsThe work reflected in this book was done in the scope of the European project P SOCRATES, funded under the FP7 framework program of the European Commission. High-performance and time-predictable embedded computing is ideal for personnel in computer/communication/embedded industries as well as academic staff and master/research students in computer science, embedded systems, cyber-physical systems and internet-of-things.

Download or read book Software Process Improvement written by Rory O'Connor and published by Springer Science & Business Media. This book was released on 2009-08-21 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for SPI (software process improvement) managers and - searchers, quality managers, and experienced project and research managers. The papers constitute the research proceedings of the 16th EuroSPI (European Software Process Improvement, www.eurospi.net) conference held in Alcala (Madrid region), September 2–4, 2009, Spain. Conferences have been held since 1994 in Dublin, 1995 in Vienna (Austria), 1997 in Budapest (Hungary), 1998 in Gothenburg (Sweden), 1999 in Pori (Finland), 2000 in Copenhagen (Denmark), 2001 in Limerick (Ireland), 2002 in Nuremberg (G- many), 2003 in Graz (Austria), 2004 in Trondheim (Norway), 2005 in Budapest (Hungary), 2006 in Joensuu (Finland), 2007 in Potsdam (Germany), 2008 in Dublin (Ireland), and 2009 in Alcala (Spain). EuroSPI established an experience library (library.eurospi.net) which will be conti- ously extended over the next few years and will be made available to all attendees. EuroSPI also created an umbrella initiative for establishing a European Qualification Network in which different SPINs and national initiatives join mutually beneficial collaborations (ECQA – European Certification and Qualification Association, www.ecqa.org). With a general assembly during October 15–16, 2007 through Euro-SPI partners and networks, in collaboration with the European Union (supported by the EU L- nardo da Vinci Programme) a European certification association has been created (www.eu-certificates.org, www.ecqa.org) for the IT and services sector to offer SPI knowledge and certificates to industry, establishing close knowledge transfer links between research and industry.

Download or read book Languages for System Specification written by Christoph Grimm and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributions on UML address the application of UML in the specification of embedded HW/SW systems. C-Based System Design embraces the modeling of operating systems, modeling with different models of computation, generation of test patterns, and experiences from case studies with SystemC. Analog and Mixed-Signal Systems covers rules for solving general modeling problems in VHDL-AMS, modeling of multi-nature systems, synthesis, and modeling of Mixed-Signal Systems with SystemC. Languages for formal methods are addressed by contributions on formal specification and refinement of hybrid, embedded and real-time stems. Together with articles on new languages such as SystemVerilog and Software Engineering in Automotive Systems the contributions selected for this book embrace all aspects of languages and models for specification, design, modeling and verification of systems. Therefore, the book gives an excellent overview of the actual state-of-the-art and the latest research results.

Download or read book Deterministic and Stochastic Approaches in Computer Modeling and Simulation written by Romansky, Radi Petrov and published by IGI Global. This book was released on 2023-10-09 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of computer modeling and simulation, academic scholars face a pressing challenge—how to navigate the complex landscape of both deterministic and stochastic approaches to modeling. This multifaceted arena demands a unified organizational framework, a comprehensive guide that can seamlessly bridge the gap between theory and practical application. Without such a resource, scholars may struggle to harness the full potential of computer modeling, leaving critical questions unanswered and innovative solutions undiscovered. Deterministic and Stochastic Approaches in Computer Modeling and Simulation serves as the definitive solution to the complex problem scholars encounter. By presenting a comprehensive and unified organizational approach, this book empowers academics to conquer the challenges of computer modeling with confidence. It not only provides a classification of modeling methods but also offers a formalized, step-by-step approach to conducting model investigations, starting from defining objectives to analyzing experimental results. For academic scholars seeking a holistic understanding of computer modeling, this book is the ultimate solution. It caters to the diverse needs of scholars by addressing both deterministic and stochastic approaches. Through its structured chapters, it guides readers from the very basics of computer systems investigation to advanced topics like stochastic analytical modeling and statistical modeling.

Download or read book Security of FPGA Accelerated Cloud Computing Environments written by Jakub Szefer and published by Springer Nature. This book was released on 2024-01-29 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses security of FPGA-accelerated cloud computing environments. It presents a comprehensive review of the state-of-the-art in security threats as well as defenses. The book further presents design principles to help in the evaluation and designs of cloud-based FPGA deployments which are secure from information leaks and potential attacks.

Download or read book Edge Computing Resilience written by Yanlong Zhai and published by Springer Nature. This book was released on with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering and Managing Software Requirements written by Aybüke Aurum and published by Springer Science & Business Media. This book was released on 2006-04-07 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Requirements engineering is the process by which the requirements for software systems are gathered, analyzed, documented, and managed throughout their complete lifecycle. Traditionally it has been concerned with technical goals for, functions of, and constraints on software systems. Aurum and Wohlin, however, argue that it is no longer appropriate for software systems professionals to focus only on functional and non-functional aspects of the intended system and to somehow assume that organizational context and needs are outside their remit. Instead, they call for a broader perspective in order to gain a better understanding of the interdependencies between enterprise stakeholders, processes, and software systems, which would in turn give rise to more appropriate techniques and higher-quality systems. Following an introductory chapter that provides an exploration of key issues in requirements engineering, the book is organized in three parts. Part 1 presents surveys of state-of-the art requirements engineering process research along with critical assessments of existing models, frameworks and techniques. Part 2 addresses key areas in requirements engineering, such as market-driven requirements engineering, goal modeling, requirements ambiguity, and others. Part 3 concludes the book with articles that present empirical evidence and experiences from practices in industrial projects. Its broader perspective gives this book its distinct appeal and makes it of interest to both researchers and practitioners, not only in software engineering but also in other disciplines such as business process engineering and management science.

Download or read book Intelligent Music Information Systems Tools and Methodologies written by Shen, Jialie and published by IGI Global. This book was released on 2007-08-31 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern technology and the development of user-centric applications have grown to encompass many of our everyday routines and interests. Such advances in music data management and information retrieval techniques have crossed the boundaries of expertise from researchers to developers to professionals in the music industry. Intelligent Music Information Systems: Tools and Methodologies provides comprehensive description and analysis into the use of music information retrieval from the data management perspective, and thus provides libraries in academic, commercial, and other settings with a complete reference for multimedia system applications.

Download or read book Java Microarchitectures written by Vijaykrishnan Narayanan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Java is an exciting new object-oriented technology. Hardware for supporting objects and other features of Java such as multithreading, dynamic linking and loading is the focus of this book. The impact of Java's features on micro-architectural resources and issues in the design of Java-specific architectures are interesting topics that require the immediate attention of the research community. While Java has become an important part of desktop applications, it is now being used widely in high-end server markets, and will soon be widespread in low-end embedded computing. Java Microarchitectures contains a collection of papers providing a snapshot of the state of the art in hardware support for Java. The book covers the behavior of Java applications, embedded processors for Java, memory system design, and high-performance single-chip architectures designed to execute Java applications efficiently.

Download or read book High Performance and Time Predictable Embedded Computing written by Pinho, Luis Miguel and published by River Publishers. This book was released on 2018-07-04 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, the prevalence of computing systems in our lives is so ubiquitous that we live in a cyber-physical world dominated by computer systems, from pacemakers to cars and airplanes. These systems demand for more computational performance to process large amounts of data from multiple data sources with guaranteed processing times. Actuating outside of the required timing bounds may cause the failure of the system, being vital for systems like planes, cars, business monitoring, e-trading, etc. High-Performance and Time-Predictable Embedded Computing presents recent advances in software architecture and tools to support such complex systems, enabling the design of embedded computing devices which are able to deliver high-performance whilst guaranteeing the application required timing bounds. Technical topics discussed in the book include: Parallel embedded platformsProgramming modelsMapping and scheduling of parallel computationsTiming and schedulability analysisRuntimes and operating systems The work reflected in this book was done in the scope of the European project P‑SOCRATES, funded under the FP7 framework program of the European Commission. High-performance and time-predictable embedded computing is ideal for personnel in computer/communication/embedded industries as well as academic staff and master/research students in computer science, embedded systems, cyber-physical systems and internet-of-things.