Download or read book Proceedings of the 12th International Conference on Robotics Vision Signal Processing and Power Applications written by Nur Syazreen Ahmad and published by Springer Nature. This book was released on with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Systems Operation with 100 Renewable Energy Sources written by Sanjeevikumar Padmanaban and published by Elsevier. This book was released on 2023-11-08 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Systems Operation with 100% Renewable Energy Sources combines fundamental concepts of renewable energy integration into power systems with real-world case studies to bridge the gap between theory and implementation. The book examines the challenges and solutions for renewable energy integration into the transmission and distribution grids, and also provides information on design, analysis and operation. Starting with an introduction to renewable energy sources and bulk power systems, including policies and frameworks for grid upgradation, the book then provides forecasting, modeling and analysis techniques for renewable energy sources. Subsequent chapters discuss grid code requirements and compliance, before presenting a detailed break down of solar and wind integration into power systems. Other topics such as voltage control and optimization, power quality enhancement, and stability control are also considered. Filled with case studies, applications and techniques, Power Systems Operation with 100% Renewable Energy Sources is a valuable read to researchers, students and engineers working towards more sustainable power systems. Explains Volt/Var control and optimization for both transmission grid and distribution Discusses renewable energy integration into the weak grid system, along with its challenges, examples, and case studies Offers simulation examples of renewable energy integration studies that readers will perform using advanced simulation tools Presents recent trends like energy storage systems and demand responses for improving stability and reliability

Download or read book Fundamentals of Power Systems Analysis 1 written by Mostafa Eidiani and published by CRC Press. This book was released on 2023-09-13 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: A supplementary book on power systems and their points is necessary for every successful student because the main books contain so much information. The supplementary book should include a summary, many tests, and an explanation of the answers. The structure in Fundamentals of Power System Analysis 1: Problems and Solutions is very helpful for re-reading and summarizing the information. This book can help you increase your study speed and master the important lessons if you are in the last few months of the semester and have not studied. This book is styled after national exams, with many varied tests with complete descriptive answers This book covers everything you need to know about power systems analysis A comprehensive and detailed examination of each image and figure has been conducted in this book. Students will be able to review points more quickly. It is particularly helpful before exams or national tests when you are under stress. It has the main advantage of providing an analysis of concepts and their combination. This allows students to better answer questions derived from several other subjects in a combined manner.

Download or read book Advanced Topics in Power Systems Analysis written by Mostafa Eidiani and published by CRC Press. This book was released on 2024-09-06 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Power Systems Analysis is one of the most challenging courses in the Electric Power Engineering major which is taught to junior students. Its complexity arises from numerous prerequisites, a wide array of topics, and a crucial dependence on computational tools, presenting students with significant challenges. This book serves as a continuation of our previous book, Fundamentals of Power Systems Analysis 1: Problems and Solutions, specifically delving into advanced topics in power systems analysis. The structure of the Advanced Topics in Power Systems Analysisis as follows: Economic Load Dispatch, Symmetrical and Unsymmetrical Short Circuits, Transient Stability Analysis, Power System Linear Cintrols, and Key Concepts in Power System Analysis, Operation, and Control. The structure of the Fundamentals of Power System Analysis 1 is as follows: Introduction to the Power System, Transmission Line Parameters, Line Model and Performance, and Power Flow Analysis. In brief, advantages associated with delving into both books are as follows: A variety of tests to prepare for employment exams. Electrical engineers practicing power system analysis can find almost everything they need. This book contains both difficult and easy problems and solutions. Readers have the capability to solve problems presented in this book solely using a calculator, without dependence on computer-based software. This book provides power systems concepts through studying two-choice questions. In the end, we had a great time in writing this book, and we truly hope you enjoy reading it as much as we enjoyed creating it!

Download or read book Proceedings of the 7th International Conference on Electrical Control and Computer Engineering Volume 1 written by Zainah Md. Zain and published by Springer Nature. This book was released on with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IoT and ML for Information Management A Smart Healthcare Perspective written by Suyel Namasudra and published by Springer Nature. This book was released on with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microwave Devices and Circuits for Advanced Wireless Communication written by Dilip Kumar Choudhary and published by CRC Press. This book was released on 2024-08-27 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of design and analysis of microwave devices and circuits for 5G and beyond wireless communication systems. It focuses on modern microwave antennas, filters, metamaterials, and MIMO systems. It includes a design approach based on Artificial Intelligence and the practical use of microwave devices and circuits in commercial, medical, and military applications. Microwave Devices and Circuits for Advanced Wireless Communications: Design and Analysis explores the performance of microwave devices and circuits by highlighting the difficulties encountered by researchers and designers such as latency, interoperability, wireless coexistence, data streaming, safety, security, and privacy. The book explores the most important aspects of antenna design, including radiation pattern control, impedance matching with bandwidth improvement, and gain enhancement. It also examines different categories of metasurfaces, including frequency-selective surfaces (FSS) and electromagnetic bandgap (EBG) structures, and their distinct roles in antenna design. Additionally, the book examines concepts such as ultra-wideband (UWB) radar for 5G millimeter wave applications, and advanced techniques such as synthetic aperture radar (SAR), beam-forming, compressed sensing, and diffraction tomography for enabling high-resolution imaging across wider application areas. The authors also present an overview on applying machine learning (ML) techniques to advanced wireless communication for signal-processing tasks such as signal denoising, equalization, and modulation recognition. They then discuss the potential significance of UAV communication systems in achieving seamless connection, quality of service (QoS), as well as the difficulties and potential remedies involved in building dependable networks using UAVs. Throughout the book the authors offer a critical assessment of the strengths and limitations of each topic and approach presented, thus providing valuable guidance for future research in this exciting field. This book will be helpful for graduate students, researchers, and engineers working in the area of design and reliability of circuits for microwave and communication systems.

Download or read book Microgrids for Commercial Systems written by Sivaraman Palanisamy and published by John Wiley & Sons. This book was released on 2024-02-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: MICROGRIDS for COMMERCIAL SYSTEMS This distinct volume provides detailed information on the concepts and applications of the emerging field of microgrids for commercial applications, offering solutions in the design, installation, and operation of this new, cutting-edge technology. The microgrid is defined as Distributed Energy Resources (DER) and interconnected loads with clearly defined electrical boundaries that act as a single controllable entity concerning the grid as per IEEE standard 2030.7-2017. It provides an uninterrupted power supply to end-user loads with high reliability. Commercial systems like IT/ITES, shopping complexes, malls, the banking sector, hospitals, etc., need an uninterrupted input power supply with high reliability. Microgrids are more suitable for commercial systems to service their clients with no service discontinuity. The microgrid enables both connection and disconnection from the grid. That is, the microgrid can operate both in grid-connected and islanded modes of operation. The microgrid controller plays an important role in microgrid systems. It shall have an energy management system and real-time control functions that operate in the following conditions: both grid-connected and islanded modes of operation, automatic transfer from grid-connected mode to islanding mode, reconnection and re-synchronization from islanded mode to grid-connected mode, optimization of both real and reactive power generation and consumption by the energy management system, grid support, ancillary services, etc. Whenever a microgrid is in islanded mode, it will work as an autonomous system without a distribution grid power supply. In this mode of operation, fault in the transmission or distribution grid will not propagate into the microgrid. Whenever a microgrid operates in grid-connected mode, power flows bi-directionally between the distribution grid and microgrid at the point of interconnection. Hence, microgrids ensure the interrupted power supply to the end-user loads with high reliability. This book aims to bring together the design, installation, operation, and new research that has been carried out in the field of microgrid applications for commercial power systems.

Download or read book The Proceedings of 2023 International Conference on Wireless Power Transfer ICWPT2023 written by Chunwei Cai and published by Springer Nature. This book was released on with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigations in Pattern Recognition and Computer Vision for Industry 4 0 written by Chowdhary, Chiranji Lal and published by IGI Global. This book was released on 2023-09-07 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: The approaches to computer vision have undergone a long journey in recent years, but still, innovations are continuing with leverage increases in computing power, new data availability, and new ways to leverage machine-learning algorithms. As a branch of artificial intelligence (AI), computer vision brings meaningful information from images and videos. Such innovations help communicators to run better campaigns, amplify messages further, and stand out in a noisy, crowded marketplace. Investigations in Pattern Recognition and Computer Vision for Industry 4.0 provides a holistic discussion of the new practical applications and use cases of computer vision and communications. Covering topics such as social media filters, mobile computer vision, and AI-powered image editing, this book is ideal for academicians, researchers, postgraduate students, professional data analysts, research and development centers, organizations dealing with healthcare informatics, and IT firms.

Download or read book Proceedings of the NIELIT s International Conference on Communication Electronics and Digital Technology written by Palaiahnakote Shivakumara and published by Springer Nature. This book was released on with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Power and Automation Engineering written by Sanjay Yadav and published by Springer Nature. This book was released on with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Proceedings of 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment IDCOMPU2023 written by Xuzhu Dong and published by Springer Nature. This book was released on 2023-12-30 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes original, peer-reviewed research papers from the 2023 4th International Symposium on Insulation and Discharge Computation for Power Equipment (IDCOMPU2023), held in Wuhan, China. The topics covered include but are not limited to: insulation, discharge computations, electric power equipment, and electrical materials. The papers share the latest findings in the field of insulation and discharge computations of electric power equipment, making the book a valuable asset for researchers, engineers, university students, etc.

Download or read book Robotics and Automation in Healthcare written by R. Thanigaivelan and published by CRC Press. This book was released on 2024-07-26 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent pandemic has forced researchers to adapt technologies such as robotics and AI in the healthcare field. This book, Robotics and Automation in Healthcare: Advanced Applications, explores these new technologies by focusing on important issues related to the employment of robotics and automation in healthcare, such as in medical diagnosis, treatment, and surgery. The volume reviews wireless charging of implantable pacemakers, considers smart bot design for library building of medical colleges, and discusses strain distribution in biomechanical systems. Other topics included in the book are medical imaging, drone technology, 3D printing, and image processing techniques. The application and importance of actuators in medical devices, especially during surgery, is discussed, as are wearable devices for pre-identification of seizure development. The volume also looks at a decision support system for detection of suitable robots and early detection of diseases with the support of image processing techniques. The application of nano-robots in healthcare is also explored. Providing advanced information and insight into robotics, wearable devices, and applications of image processing in healthcare field, this volume will be helpful to those in communications and electronics engineering as well as those at the forefront of smart technology in healthcare.

Download or read book Smart Technologies in Urban Engineering written by Olga Arsenyeva and published by Springer Nature. This book was released on 2023-12-18 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive review of smart technologies and provides perspectives on their applications in urban engineering. It covers a wide range of applications, from manufacturing engineering and transport logistics to information and computation technologies, providing readers with fresh ideas for future research and collaborations. The book showcases selected papers from the International Conference on Smart Technologies in Urban Engineering (STUE-2023), hosted by O.M. Beketov National University of Urban Economy in Kharkiv, Ukraine. The conference, held on June 8–10, 2023, aimed to address the complex rehabilitation of areas damaged by military conflicts and natural disasters. The contributions within this book offer a wealth of valuable information, fostering a meaningful exchange of experiences among scientists in the field of urban engineering. By delving into this book, readers explore innovative approaches to tackle urban challenges, gain insights from experts, and contribute to the advancement of smart technologies for the betterment of cities worldwide.

Download or read book The proceedings of the 10th Frontier Academic Forum of Electrical Engineering FAFEE2022 written by Xuzhu Dong and published by Springer Nature. This book was released on 2023-08-23 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the original, peer-reviewed research papers from the 10th Frontier Academic Forum of Electrical Engineering (FAFEE 2022), held in Xi’an, China, in August 2022. It gathers the latest research, innovations, and applications in the fields of Electrical Engineering. The topics it covers include electrical materials and equipment, electrical energy storage and device, power electronics and drives, new energy electric power system equipment, IntelliSense and intelligent equipment, biological electromagnetism and its applications, and insulation and discharge computation for power equipment. Given its scope, the book benefits all researchers, engineers, and graduate students who want to learn about cutting-edge advances in Electrical Engineering.

Download or read book Recent Advances in Mechanical Engineering Volume 1 written by Gujjala Raghavendra and published by Springer Nature. This book was released on with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: