Download or read book Proceedings of the International Conference on Advanced Intelligent Systems and Informatics 2019 written by Aboul Ella Hassanien and published by Springer Nature. This book was released on 2019-10-02 with total page 1093 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 5th International Conference on Advanced Intelligent Systems and Informatics 2019 (AISI2019), which took place in Cairo, Egypt, from October 26 to 28, 2019. This international and interdisciplinary conference, which highlighted essential research and developments in the fields of informatics and intelligent systems, was organized by the Scientific Research Group in Egypt (SRGE). The book is divided into several sections, covering the following topics: machine learning and applications, swarm optimization and applications, robotic and control systems, sentiment analysis, e-learning and social media education, machine and deep learning algorithms, recognition and image processing, intelligent systems and applications, mobile computing and networking, cyber-physical systems and security, smart grids and renewable energy, and micro-grid and power systems.
Download or read book Proceedings of the International Conference on Advanced Mechanical Engineering Automation and Sustainable Development 2021 AMAS2021 written by Banh Tien Long and published by Springer Nature. This book was released on 2022-05-03 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected, peer-reviewed proceedings of the International Conference on Advanced Mechanical Engineering, Automation and Sustainable Development 2021 (AMAS2021), held in the city of Ha Long, Vietnam, from November 4 to 7, 2021. AMAS2021 is a special meeting of the International Conference on Material, Machines and Methods for Sustainable Development (MMMS), with a strong focus on automation and fostering an overall approach to assist policy makers, industries, and researchers at various levels to position local technological development toward sustainable development. The contributions published in this book stem from a wide spectrum of research, ranging from micro- and nanomaterial design and processing, to special applications in mechanical technology, environmental protection, green development, and climate change mitigation. A large group of contributions selected for these proceedings also focus on modeling and manufacturing of ecomaterials.
Download or read book International Conference on Artificial Intelligence for Smart Community written by Rosdiazli Ibrahim and published by Springer Nature. This book was released on 2022-11-13 with total page 1049 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceeding gather a selection of peer-reviewed papers presented at the 1st International Conference on Artificial Intelligence for Smart Community (AISC 2020), held as a virtual conference on 17–18 December 2020, with the theme Re-imagining Artificial Intelligence (AI) for Smart Community to apply computational intelligence for biomedical instruments, automation & control, and smart community to develop suitable solution for various real-world application. The conference virtually brought together researchers, scientists, engineers, industrial professionals, and students presenting important results in the related field of healthcare technology, soft computing technologies, IoT, evolutionary computations, automation and control, smart manufacturing and smart cities. Researchers and scientist working in the allied domain of Artificial Intelligence and others will find the book useful as it will contain some latest computational intelligence methodologies and applications.
Download or read book Proceedings of the 5th International Conference on Industrial Engineering ICIE 2019 written by Andrey A. Radionov and published by Springer Nature. This book was released on 2019-11-14 with total page 1449 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights recent findings in industrial, manufacturing and mechanical engineering, and provides an overview of the state of the art in these fields, mainly in Russia and Eastern Europe. A broad range of topics and issues in modern engineering are discussed, including the dynamics of machines and working processes, friction, wear and lubrication in machines, surface transport and technological machines, manufacturing engineering of industrial facilities, materials engineering, metallurgy, control systems and their industrial applications, industrial mechatronics, automation and robotics. The book gathers selected papers presented at the 5th International Conference on Industrial Engineering (ICIE), held in Sochi, Russia in March 2019. The authors are experts in various fields of engineering, and all papers have been carefully reviewed. Given its scope, the book will be of interest to a wide readership, including mechanical and production engineers, lecturers in engineering disciplines, and engineering graduates.
Download or read book Proceedings of the 2nd International Conference on Mechanical System Dynamics written by Xiaoting Rui and published by Springer Nature. This book was released on with total page 4383 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Robotics and Applications written by Huayong Yang and published by Springer Nature. This book was released on 2023-11-06 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023. The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows: Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application. Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot. Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots. Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots. Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots. Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics. Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction. Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms. Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.
Download or read book Smart Trends in Computing and Communications written by Yu-Dong Zhang and published by Springer Nature. This book was released on 2021-10-25 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers high-quality papers presented at the Fifth International Conference on Smart Trends in Computing and Communications (SmartCom 2021), organized by Global Knowledge Research Foundation (GR Foundation) from March 2 – 3 , 2021. It covers the state of the art and emerging topics in information, computer communications, and effective strategies for their use in engineering and managerial applications. It also explores and discusses the latest technological advances in, and future directions for, information and knowledge computing and its applications.
Download or read book Advances in Computational Intelligence written by Ignacio Rojas and published by Springer. This book was released on 2019-06-05 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set LNCS 10305 and LNCS 10306 constitutes the refereed proceedings of the 15th International Work-Conference on Artificial Neural Networks, IWANN 2019, held at Gran Canaria, Spain, in June 2019. The 150 revised full papers presented in this two-volume set were carefully reviewed and selected from 210 submissions. The papers are organized in topical sections on machine learning in weather observation and forecasting; computational intelligence methods for time series; human activity recognition; new and future tendencies in brain-computer interface systems; random-weights neural networks; pattern recognition; deep learning and natural language processing; software testing and intelligent systems; data-driven intelligent transportation systems; deep learning models in healthcare and biomedicine; deep learning beyond convolution; artificial neural network for biomedical image processing; machine learning in vision and robotics; system identification, process control, and manufacturing; image and signal processing; soft computing; mathematics for neural networks; internet modeling, communication and networking; expert systems; evolutionary and genetic algorithms; advances in computational intelligence; computational biology and bioinformatics.
Download or read book Future Grid Scale Energy Storage Solutions written by Ahmad Arabkoohsar and published by Elsevier. This book was released on 2023-03-25 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a detailed understanding of why heat and electricity energy storage technologies have developed so rapidly, Future Grid-Scale Energy Storage Solutions: Mechanical and Chemical Technologies and Principles presents the required fundamentals for techno-economic and environmental analysis of various grid-scale energy storage technologies. Through a consistent framework, each chapter outlines state-of-the-art advances, benefits and challenges, energy and exergy analyses models of these technologies, as well as an elaboration on their performance under dynamic and off-design operating conditions. Chapters include a case study analysis section, giving a detailed understanding of the systems' thermodynamics and economic and environmental performance in real operational conditions, and wrap-up with a discussion of the future prospects of these technologies from commercial and research perspectives. This book is a highly beneficial reference for researchers and scientists dealing with grid-scale energy storage systems, as a single comprehensive book providing the information and fundamentals required to do modeling, analysis, and/or feasibility studies of such systems. - Features all the major mechanical and chemical energy storage systems, including electricity and thermal energy storage methods - Includes step-by-step energy and exergy modeling, including off-design performance modeling - Provides future perspectives for technologies, describing how they will contribute to the future smart energy systems
Download or read book Robotics Autonomous Systems and AI for Nonurgent Nonemergent Healthcare Delivery During and After the COVID 19 Pandemic written by Mahdi Tavakoli and published by Frontiers Media SA. This book was released on 2022-07-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Tools and Methods in Industrial Engineering III written by Monica Carfagni and published by Springer Nature. This book was released on with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital TV and Wireless Multimedia Communication written by Guangtao Zhai and published by Springer Nature. This book was released on 2020-02-15 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents revised selected papers from the 16th International Forum on Digital TV and Wireless Multimedia Communication, IFTC 2019, held in Shanghai, China, in September 2019. The 34 full papers presented in this volume were carefully reviewed and selected from 120 submissions. They were organized in topical sections on image processing; machine learning; quality assessment; telecommunications; video surveillance; virtual reality.
Download or read book Applied Computer Sciences in Engineering written by Juan Carlos Figueroa-García and published by Springer Nature. This book was released on 2022-11-23 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 9th Workshop on Engineering Applications on Applied Computer Sciences in Engineering, WEA 2022, which took place in Bogotá, Colombia, in November/December 2022. The 39 papers presented in this volume were carefully reviewed and selected from 143 submissions. They were organized in topical sections as follows: Artificial Intelligence; Optimization; Simulation; and Applications.
Download or read book Intelligent Robotics and Applications written by Haibin Yu and published by Springer. This book was released on 2019-08-01 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume set LNAI 11740 until LNAI 11745 constitutes the proceedings of the 12th International Conference on Intelligent Robotics and Applications, ICIRA 2019, held in Shenyang, China, in August 2019. The total of 378 full and 25 short papers presented in these proceedings was carefully reviewed and selected from 522 submissions. The papers are organized in topical sections as follows: Part I: collective and social robots; human biomechanics and human-centered robotics; robotics for cell manipulation and characterization; field robots; compliant mechanisms; robotic grasping and manipulation with incomplete information and strong disturbance; human-centered robotics; development of high-performance joint drive for robots; modular robots and other mechatronic systems; compliant manipulation learning and control for lightweight robot. Part II: power-assisted system and control; bio-inspired wall climbing robot; underwater acoustic and optical signal processing for environmental cognition; piezoelectric actuators and micro-nano manipulations; robot vision and scene understanding; visual and motional learning in robotics; signal processing and underwater bionic robots; soft locomotion robot; teleoperation robot; autonomous control of unmanned aircraft systems. Part III: marine bio-inspired robotics and soft robotics: materials, mechanisms, modelling, and control; robot intelligence technologies and system integration; continuum mechanisms and robots; unmanned underwater vehicles; intelligent robots for environment detection or fine manipulation; parallel robotics; human-robot collaboration; swarm intelligence and multi-robot cooperation; adaptive and learning control system; wearable and assistive devices and robots for healthcare; nonlinear systems and control. Part IV: swarm intelligence unmanned system; computational intelligence inspired robot navigation and SLAM; fuzzy modelling for automation, control, and robotics; development of ultra-thin-film, flexible sensors, and tactile sensation; robotic technology for deep space exploration; wearable sensing based limb motor function rehabilitation; pattern recognition and machine learning; navigation/localization. Part V: robot legged locomotion; advanced measurement and machine vision system; man-machine interactions; fault detection, testing and diagnosis; estimation and identification; mobile robots and intelligent autonomous systems; robotic vision, recognition and reconstruction; robot mechanism and design. Part VI: robot motion analysis and planning; robot design, development and control; medical robot; robot intelligence, learning and linguistics; motion control; computer integrated manufacturing; robot cooperation; virtual and augmented reality; education in mechatronics engineering; robotic drilling and sampling technology; automotive systems; mechatronics in energy systems; human-robot interaction.
Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.
Download or read book Topics in Modal Analysis Testing Volume 8 written by Brandon J. Dilworth and published by Springer Nature. This book was released on 2021-11-03 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Modal Analysis & Testing, Volume 8: Proceedings of the 39th IMAC, A Conference and Exposition on Structural Dynamics, 2021, the eighth volume of nine from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Modal Analysis, including papers on: Operational Modal & Modal Analysis Applications Experimental Techniques Modal Analysis, Measurements & Parameter Estimation Modal Vectors & Modeling Basics of Modal Analysis Additive Manufacturing & Modal Testing of Printed Parts
