Download or read book Euro Par 2022 Parallel Processing Workshops written by Jeremy Singer and published by Springer Nature. This book was released on 2023-05-01 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers from the workshops held at the 28th International European Conference on Parallel and Distributed Computing, Euro-Par 2022, which took place in Glasgow, UK, in August 22–26, 2022 Out of a total of 35 submissions 24 papers have been accepted, 19 of these are included in this book. They stem from the following workshops: - Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HeteroPar)- Workshop on Asynchronous Many-Task systems for Exascale (AMTE) - Workshop on Domain Specific Languages for High-Performance Computing (DSL-HPC)- Workshop on Distributed and Heterogeneous Programming in C and C++ (DHPCC++)- Workshop on Resiliency in High Performance Computing in Clouds, Grids, and Clusters (Resilience) In addition, the proceedings also contains 6 extended abstracts from the PhD Symposium.

Download or read book Software for Exascale Computing SPPEXA 2016 2019 written by Hans-Joachim Bungartz and published by Springer Nature. This book was released on 2020-07-30 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the research done and results obtained in the second funding phase of the Priority Program 1648 "Software for Exascale Computing" (SPPEXA) of the German Research Foundation (DFG) presented at the SPPEXA Symposium in Dresden during October 21-23, 2019. In that respect, it both represents a continuation of Vol. 113 in Springer’s series Lecture Notes in Computational Science and Engineering, the corresponding report of SPPEXA’s first funding phase, and provides an overview of SPPEXA’s contributions towards exascale computing in today's sumpercomputer technology. The individual chapters address one or more of the research directions (1) computational algorithms, (2) system software, (3) application software, (4) data management and exploration, (5) programming, and (6) software tools. The book has an interdisciplinary appeal: scholars from computational sub-fields in computer science, mathematics, physics, or engineering will find it of particular interest.

Download or read book Principles of High Performance Processor Design written by Junichiro Makino and published by Springer Nature. This book was released on 2021-08-20 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how we can design and make efficient processors for high-performance computing, AI, and data science. Although there are many textbooks on the design of processors we do not have a widely accepted definition of the efficiency of a general-purpose computer architecture. Without a definition of the efficiency, it is difficult to make scientific approach to the processor design. In this book, a clear definition of efficiency is given and thus a scientific approach for processor design is made possible. In chapter 2, the history of the development of high-performance processor is overviewed, to discuss what quantity we can use to measure the efficiency of these processors. The proposed quantity is the ratio between the minimum possible energy consumption and the actual energy consumption for a given application using a given semiconductor technology. In chapter 3, whether or not this quantity can be used in practice is discussed, for many real-world applications. In chapter 4, general-purpose processors in the past and present are discussed from this viewpoint. In chapter 5, how we can actually design processors with near-optimal efficiencies is described, and in chapter 6 how we can program such processors. This book gives a new way to look at the field of the design of high-performance processors.

Download or read book Parallel C written by Patrick Diehl and published by Springer Nature. This book was released on with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Federated Learning and Privacy Preserving in Healthcare AI written by Lilhore, Umesh Kumar and published by IGI Global. This book was released on 2024-05-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of artificial intelligence (AI) in data-driven medicine has revolutionized healthcare, presenting practitioners with unprecedented tools for diagnosis and personalized therapy. However, this progress comes with a critical concern: the security and privacy of sensitive patient data. As healthcare increasingly leans on AI, the need for robust solutions to safeguard patient information has become more pressing than ever. Federated Learning and Privacy-Preserving in Healthcare AI emerges as the definitive solution to balancing medical progress with patient data security. This carefully curated volume not only outlines the challenges of federated learning but also provides a roadmap for implementing privacy-preserving AI systems in healthcare. By decentralizing the training of AI models, federated learning mitigates the risks associated with centralizing patient data, ensuring that critical information never leaves its original location. Aimed at healthcare professionals, AI experts, policymakers, and academics, this book not only delves into the technical aspects of federated learning but also fosters a collaborative approach to address the multifaceted challenges at the intersection of healthcare and AI.

Download or read book Handbook of Dynamic Data Driven Applications Systems written by Frederica Darema and published by Springer Nature. This book was released on 2023-10-16 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Second Volume in the series Handbook of Dynamic Data Driven Applications Systems (DDDAS) expands the scope of the methods and the application areas presented in the first Volume and aims to provide additional and extended content of the increasing set of science and engineering advances for new capabilities enabled through DDDAS. The methods and examples of breakthroughs presented in the book series capture the DDDAS paradigm and its scientific and technological impact and benefits. The DDDAS paradigm and the ensuing DDDAS-based frameworks for systems’ analysis and design have been shown to engender new and advanced capabilities for understanding, analysis, and management of engineered, natural, and societal systems (“applications systems”), and for the commensurate wide set of scientific and engineering fields and applications, as well as foundational areas. The DDDAS book series aims to be a reference source of many of the important research and development efforts conducted under the rubric of DDDAS, and to also inspire the broader communities of researchers and developers about the potential in their respective areas of interest, of the application and the exploitation of the DDDAS paradigm and the ensuing frameworks, through the examples and case studies presented, either within their own field or other fields of study. As in the first volume, the chapters in this book reflect research work conducted over the years starting in the 1990’s to the present. Here, the theory and application content are considered for: Foundational Methods Materials Systems Structural Systems Energy Systems Environmental Systems: Domain Assessment & Adverse Conditions/Wildfires Surveillance Systems Space Awareness Systems Healthcare Systems Decision Support Systems Cyber Security Systems Design of Computer Systems The readers of this book series will benefit from DDDAS theory advances such as object estimation, information fusion, and sensor management. The increased interest in Artificial Intelligence (AI), Machine Learning and Neural Networks (NN) provides opportunities for DDDAS-based methods to show the key role DDDAS plays in enabling AI capabilities; address challenges that ML-alone does not, and also show how ML in combination with DDDAS-based methods can deliver the advanced capabilities sought; likewise, infusion of DDDAS-like approaches in NN-methods strengthens such methods. Moreover, the “DDDAS-based Digital Twin” or “Dynamic Digital Twin”, goes beyond the traditional DT notion where the model and the physical system are viewed side-by-side in a static way, to a paradigm where the model dynamically interacts with the physical system through its instrumentation, (per the DDDAS feed-back control loop between model and instrumentation).

Download or read book Parallel Processing and Applied Mathematics written by Roman Wyrzykowski and published by Springer Nature. This book was released on 2020-03-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume set LNCS 12043 and 12044 constitutes revised selected papers from the 13th International Conference on Parallel Processing and Applied Mathematics, PPAM 2019, held in Bialystok, Poland, in September 2019. The 91 regular papers presented in these volumes were selected from 161 submissions. For regular tracks of the conference, 41 papers were selected from 89 submissions. The papers were organized in topical sections named as follows: Part I: numerical algorithms and parallel scientific computing; emerging HPC architectures; performance analysis and scheduling in HPC systems; environments and frameworks for parallel/distributed/cloud computing; applications of parallel computing; parallel non-numerical algorithms; soft computing with applications; special session on GPU computing; special session on parallel matrix factorizations. Part II: workshop on language-based parallel programming models (WLPP 2019); workshop on models algorithms and methodologies for hybrid parallelism in new HPC systems; workshop on power and energy aspects of computations (PEAC 2019); special session on tools for energy efficient computing; workshop on scheduling for parallel computing (SPC 2019); workshop on applied high performance numerical algorithms for PDEs; minisymposium on HPC applications in physical sciences; minisymposium on high performance computing interval methods; workshop on complex collective systems. Chapters "Parallel Adaptive Cross Approximation for the Multi-trace Formulation of Scattering Problems" and "A High-Order Discontinuous Galerkin Solver with Dynamic Adaptive Mesh Refinement to Simulate Cloud Formation Processes" are available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Supercomputing Frontiers written by Rio Yokota and published by Springer. This book was released on 2018-03-20 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: It constitutes the refereed proceedings of the 4th Asian Supercomputing Conference, SCFA 2018, held in Singapore in March 2018. Supercomputing Frontiers will be rebranded as Supercomputing Frontiers Asia (SCFA), which serves as the technical programme for SCA18. The technical programme for SCA18 consists of four tracks: Application, Algorithms & Libraries Programming System Software Architecture, Network/Communications & Management Data, Storage & Visualisation The 20 papers presented in this volume were carefully reviewed nd selected from 60 submissions.

Download or read book OpenMP Conquering the Full Hardware Spectrum written by Xing Fan and published by Springer Nature. This book was released on 2019-08-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 15th International Workshop on Open MP, IWOMP 2019, held in Auckland, New Zealand, in September 2019. The 22 full papers presented in this volume were carefully reviewed and selected for inclusion in this book. The papers are organized in topical sections named: best paper; tools, accelerators, compilation, extensions, tasking, and using OpenMP.

Download or read book Programming Models for Parallel Computing written by Pavan Balaji and published by MIT Press. This book was released on 2015-11-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the most prominent contemporary parallel processing programming models, written in a unique tutorial style. With the coming of the parallel computing era, computer scientists have turned their attention to designing programming models that are suited for high-performance parallel computing and supercomputing systems. Programming parallel systems is complicated by the fact that multiple processing units are simultaneously computing and moving data. This book offers an overview of some of the most prominent parallel programming models used in high-performance computing and supercomputing systems today. The chapters describe the programming models in a unique tutorial style rather than using the formal approach taken in the research literature. The aim is to cover a wide range of parallel programming models, enabling the reader to understand what each has to offer. The book begins with a description of the Message Passing Interface (MPI), the most common parallel programming model for distributed memory computing. It goes on to cover one-sided communication models, ranging from low-level runtime libraries (GASNet, OpenSHMEM) to high-level programming models (UPC, GA, Chapel); task-oriented programming models (Charm++, ADLB, Scioto, Swift, CnC) that allow users to describe their computation and data units as tasks so that the runtime system can manage computation and data movement as necessary; and parallel programming models intended for on-node parallelism in the context of multicore architecture or attached accelerators (OpenMP, Cilk Plus, TBB, CUDA, OpenCL). The book will be a valuable resource for graduate students, researchers, and any scientist who works with data sets and large computations. Contributors Timothy Armstrong, Michael G. Burke, Ralph Butler, Bradford L. Chamberlain, Sunita Chandrasekaran, Barbara Chapman, Jeff Daily, James Dinan, Deepak Eachempati, Ian T. Foster, William D. Gropp, Paul Hargrove, Wen-mei Hwu, Nikhil Jain, Laxmikant Kale, David Kirk, Kath Knobe, Ariram Krishnamoorthy, Jeffery A. Kuehn, Alexey Kukanov, Charles E. Leiserson, Jonathan Lifflander, Ewing Lusk, Tim Mattson, Bruce Palmer, Steven C. Pieper, Stephen W. Poole, Arch D. Robison, Frank Schlimbach, Rajeev Thakur, Abhinav Vishnu, Justin M. Wozniak, Michael Wilde, Kathy Yelick, Yili Zheng

Download or read book Big Data Analytics written by Anirban Mondal and published by Springer. This book was released on 2018-12-11 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Big Data analytics, BDA 2018, held in Warangal, India, in December 2018. The 29 papers presented in this volume were carefully reviewed and selected from 93 submissions. The papers are organized in topical sections named: big data analytics: vision and perspectives; financial data analytics and data streams; web and social media data; big data systems and frameworks; predictive analytics in healthcare and agricultural domains; and machine learning and pattern mining.

Download or read book Meshfree Methods for Partial Differential Equations written by Michael Griebel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meshfree methods for the solution of partial differential equations gained much attention in recent years, not only in the engineering but also in the mathematics community. One of the reasons for this development is the fact that meshfree discretizations and particle models are often better suited to cope with geometric changes of the domain of interest, e.g. free surfaces and large deformations, than classical discretization techniques such as finite differences, finite elements or finite volumes. Another obvious advantage of meshfree discretizations is their independence of a mesh so that the costs of mesh generation are eliminated. Also, the treatment of time-dependent PDEs from a Lagrangian point of view and the coupling of particle models and continuous models gained enormous interest in recent years from a theoretical as well as from a practial point of view. This volume consists of articles which address the different meshfree methods (SPH, PUM, GFEM, EFGM, RKPM etc.) and their application in applied mathematics, physics and engineering.

Download or read book OpenMP Conquering the Full Hardware Spectrum written by Xing Fan and published by Springer. This book was released on 2019-08-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 15th International Workshop on Open MP, IWOMP 2019, held in Auckland, New Zealand, in September 2019. The 22 full papers presented in this volume were carefully reviewed and selected for inclusion in this book. The papers are organized in topical sections named: best paper; tools, accelerators, compilation, extensions, tasking, and using OpenMP.

Download or read book Computational and Experimental Simulations in Engineering written by Hiroshi Okada and published by Springer Nature. This book was released on 2019-11-16 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest advances, innovations, and applications in the field of computational engineering, as presented by leading international researchers and engineers at the 24th International Conference on Computational & Experimental Engineering and Sciences (ICCES), held in Tokyo, Japan on March 25-28, 2019. ICCES covers all aspects of applied sciences and engineering: theoretical, analytical, computational, and experimental studies and solutions of problems in the physical, chemical, biological, mechanical, electrical, and mathematical sciences. As such, the book discusses highly diverse topics, including composites; bioengineering & biomechanics; geotechnical engineering; offshore & arctic engineering; multi-scale & multi-physics fluid engineering; structural integrity & longevity; materials design & simulation; and computer modeling methods in engineering. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations.

Download or read book Mobile Ad Hoc Networks written by Jonathan Loo and published by CRC Press. This book was released on 2016-04-19 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, this book examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Leading researchers, industry professionals, and academics provide an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service.

Download or read book Programming and Performance Visualization Tools written by Abhinav Bhatele and published by Springer. This book was released on 2019-04-24 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the revised selected papers of 4 workshops held in conjunction with the International Conference on High Performance Computing, Networking, Storage and Analysis (SC) in November 2017 in Denver, CO, USA, and in November 2018 in Dallas, TX, USA: the 6th and 7th International Workshop on Extreme-Scale Programming Tools, ESPT 2017 and ESPT 2018, and the 4th and 5th International Workshop on Visual Performance Analysis, VPA 2017 and VPA 2018. The 11 full papers of ESPT 2017 and ESPT 2018 and the 6 full papers of VPA 2017 and VPA 2018 were carefully reviewed and selected for inclusion in this book. The papers discuss the requirements for exascale-enabled tools as well as new approaches of applying visualization and visual analytic techniques to large-scale applications. Topics of interest include: programming tools; methodologies for performance engineering; tool technologies for extreme-scale challenges (e.g., scalability, resilience, power); tool support for accelerated architectures and large-scale multi-cores; tool infrastructures and environments; evolving/future application requirements for programming tools and technologies; application developer experiences with programming and performance tools; scalable displays of performance data; case studies demonstrating the use of performance visualization in practice; data models to enable scalable visualization; graph representation of unstructured performance data; presentation of high-dimensional data; visual correlations between multiple data sources; human-computer interfaces for exploring performance data; and multi-scale representations of performance data for visual exploration.

Download or read book Parallel Programming Using C written by Gregory V. Wilson and published by MIT Press. This book was released on 1996-07-08 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword by Bjarne Stroustrup Software is generally acknowledged to be the single greatest obstacle preventing mainstream adoption of massively-parallel computing. While sequential applications are routinely ported to platforms ranging from PCs to mainframes, most parallel programs only ever run on one type of machine. One reason for this is that most parallel programming systems have failed to insulate their users from the architectures of the machines on which they have run. Those that have been platform-independent have usually also had poor performance. Many researchers now believe that object-oriented languages may offer a solution. By hiding the architecture-specific constructs required for high performance inside platform-independent abstractions, parallel object-oriented programming systems may be able to combine the speed of massively-parallel computing with the comfort of sequential programming. Parallel Programming Using C++ describes fifteen parallel programming systems based on C++, the most popular object-oriented language of today. These systems cover the whole spectrum of parallel programming paradigms, from data parallelism through dataflow and distributed shared memory to message-passing control parallelism. For the parallel programming community, a common parallel application is discussed in each chapter, as part of the description of the system itself. By comparing the implementations of the polygon overlay problem in each system, the reader can get a better sense of their expressiveness and functionality for a common problem. For the systems community, the chapters contain a discussion of the implementation of the various compilers and runtime systems. In addition to discussing the performance of polygon overlay, several of the contributors also discuss the performance of other, more substantial, applications. For the research community, the contributors discuss the motivations for and philosophy of their systems. As well, many of the chapters include critiques that complete the research arc by pointing out possible future research directions. Finally, for the object-oriented community, there are many examples of how encapsulation, inheritance, and polymorphism can be used to control the complexity of developing, debugging, and tuning parallel software.