Download or read book The 25th European Conference on Integrated Optics written by Jeremy Witzens and published by Springer Nature. This book was released on with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Antenna on Chip Design Challenges and Opportunities written by Hammad M. Cheema and published by Artech House. This book was released on 2021-06-30 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Antennas are essential part of every wireless communication system. The increasing trend of applications in the radio frequency (RF) and millimeter wave frequency spectrum has reduced the antenna sizes to only a few millimeters, which makes it practical for on-chip implementations. Integrated Circuit (IC) designers who have traditionally remained isolated from antenna design now need to understand its design process and trade-offs. This comprehensive resource addresses the challenges, benefits and trade-offs of on-chip antenna implementation. It presents practical design and integration considerations of the IC and antenna combination and how both ends of the system can be utilized in a complimentary way. The book includes on-chip antenna layout considerations, layout for testability and various methods of their characterization. A look at the future trends and utilization of on-chip antennas for different applications concludes the book.

Download or read book Antenna in Package Technology and Applications written by Duixian Liu and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to antenna design, manufacturing processes, antenna integration, and packaging Antenna-in-Package Technology and Applications contains an introduction to the history of AiP technology. It explores antennas and packages, thermal analysis and design, as well as measurement setups and methods for AiP technology. The authors—well-known experts on the topic—explain why microstrip patch antennas are the most popular and describe the myriad constraints of packaging, such as electrical performance, thermo-mechanical reliability, compactness, manufacturability, and cost. The book includes information on how the choice of interconnects is governed by JEDEC for automatic assembly and describes low-temperature co-fired ceramic, high-density interconnects, fan-out wafer level packaging–based AiP, and 3D-printing-based AiP. The book includes a detailed discussion of the surface laminar circuit–based AiP designs for large-scale mm-wave phased arrays for 94-GHz imagers and 28-GHz 5G New Radios. Additionally, the book includes information on 3D AiP for sensor nodes, near-field wireless power transfer, and IoT applications. This important book: • Includes a brief history of antenna-in-package technology • Describes package structures widely used in AiP, such as ball grid array (BGA) and quad flat no-leads (QFN) • Explores the concepts, materials and processes, designs, and verifications with special consideration for excellent electrical, mechanical, and thermal performance Written for students in electrical engineering, professors, researchers, and RF engineers, Antenna-in-Package Technology and Applications offers a guide to material selection for antennas and packages, antenna design with manufacturing processes and packaging constraints, antenna integration, and packaging.

Download or read book Direct Copper Interconnection for Advanced Semiconductor Technology written by Dongkai Shangguan and published by CRC Press. This book was released on 2024-06-28 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the “More than Moore” era, performance requirements for leading edge semiconductor devices are demanding extremely fine pitch interconnection in semiconductor packaging. Direct copper interconnection has emerged as the technology of choice in the semiconductor industry for fine pitch interconnection, with significant benefits for interconnect density and device performance. Low-temperature direct copper bonding, in particular, will become widely adopted for a broad range of highperformance semiconductor devices in the years to come. This book offers a comprehensive review and in-depth discussions of the key topics in this critical new technology. Chapter 1 reviews the evolution and the most recent advances in semiconductor packaging, leading to the requirement for extremely fine pitch interconnection, and Chapter 2 reviews different technologies for direct copper interconnection, with advantages and disadvantages for various applications. Chapter 3 offers an in-depth review of the hybrid bonding technology, outlining the critical processes and solutions. The area of materials for hybrid bonding is covered in Chapter 4, followed by several chapters that are focused on critical process steps and equipment for copper electrodeposition (Chapter 5), planarization (Chapter 6), wafer bonding (Chapter 7), and die bonding (Chapter 8). Aspects related to product applications are covered in Chapter 9 for design and Chapter 10 for thermal simulation. Finally, Chapter 11 covers reliability considerations and computer modeling for process and performance characterization, followed by the final chapter (Chapter 12) outlining the current and future applications of the hybrid bonding technology. Metrology and testing are also addressed throughout the chapters. Business, economic, and supply chain considerations are discussed as related to the product applications and manufacturing deployment of the technology, and the current status and future outlook as related to the various aspects of the ecosystem are outlined in the relevant chapters of the book. The book is aimed at academic and industry researchers as well as industry practitioners, and is intended to serve as a comprehensive source of the most up-to-date knowledge, and a review of the state-of-the art of the technology and applications, for direct copper interconnection and advanced semiconductor packaging in general.

Download or read book Carbon Nanomaterial Filled Polymer Composites for Functional Applications Processing Structure and Property Relationship written by Dong Xiang and published by Frontiers Media SA. This book was released on 2022-03-11 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interconnect Reliability in Advanced Memory Device Packaging written by Chong Leong, Gan and published by Springer Nature. This book was released on 2023-05-30 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains mechanical and thermal reliability for modern memory packaging, considering materials, processes, and manufacturing. In the past 40 years, memory packaging processes have evolved enormously. This book discusses the reliability and technical challenges of first-level interconnect materials, packaging processes, advanced specialty reliability testing, and characterization of interconnects. It also examines the reliability of wire bonding, lead-free solder joints such as reliability testing and data analyses, design for reliability in hybrid packaging and HBM packaging, and failure analyses. The specialty of this book is that the materials covered are not only for second-level interconnects, but also for packaging assembly on first-level interconnects and for the semiconductor back-end on 2.5D and 3D memory interconnects. This book can be used as a text for college and graduate students who have the potential to become our future leaders, scientists, and engineers in the electronics and semiconductor industry.

Download or read book Memoirs of the Institute of Scientific and Industrial Research Osaka University written by Ōsaka Daigaku. Sangyō Kagaku Kenkyūjo and published by . This book was released on 2019 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory and Practice of Thermal Transient Testing of Electronic Components written by Marta Rencz and published by Springer Nature. This book was released on 2023-01-23 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the significant aspects of thermal transient testing, the most important method of thermal characterization of electronics available today. The book presents the theoretical background of creating structure functions from the measured results with mathematical details. It then shows how the method can be used for thermal qualification, structure integrity testing, determining material parameters, and calibrating simulation models. General practical questions about measurements are discussed to help beginners carry out thermal transient testing. The particular problems and tricks of measuring with various electronic components, such as Si diodes, bipolar transistors, MOS transistors, IGBT devices, resistors, capacitors, wide bandgap materials, and LEDs, are covered in detail with the help of various use cases. This hands-on book will enable readers to accomplish thermal transient testing on any new type of electronics and provides the theoretical details needed to understand the opportunities and limitations offered by the methodology. The book will be an invaluable reference for practicing engineers, students, and researchers.

Download or read book Micro and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems written by Sabu Thomas and published by Elsevier. This book was released on 2021-10-12 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro- and Nanotechnology Enabled Applications for Portable Miniaturized Analytical Systems outlines the basic principles of miniaturized analytical devices, such as spectrometric, separation, imaging and electrochemical miniaturized instruments. Concepts such as smartphone-enabled miniaturized detection systems and micro/nanomachines are also reviewed. Subsequent chapters explore the emerging application of these mobile devices for miniaturized analysis in various fields, including medicine and biomedicine, environmental chemistry, food chemistry, and forensic chemistry. This is an important reference source for materials scientists and engineers wanting to understand how miniaturization techniques are being used to create a range of efficient, sustainable electronic and optical devices. Miniaturization describes the concept of manufacturing increasingly smaller mechanical, optical, and electronic products and devices. These smaller instruments can be used to produce micro- and nanoscale components required for analytical procedures. A variety of micro/nanoscale materials have been synthesized and used in analytical procedures, such as sensing materials, sorbents, adsorbents, catalysts, and reactors. The miniaturization of analytical instruments can be applied to the different steps of analytical procedures, such as sample preparation, analytical separation, and detection, reducing the total cost of manufacturing the instruments and the needed reagents and organic solvents. - Outlines how miniaturization techniques can be used to create new optical and electronic micro- and nanodevices - Explores major application areas, including biomedicine, environmental science and security - Assesses the major challenges of using miniaturization techniques

Download or read book Advanced Driver Assistance Systems and Autonomous Vehicles written by Yan Li and published by Springer Nature. This book was released on 2022-10-28 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive reference for both academia and industry on the fundamentals, technology details, and applications of Advanced Driver-Assistance Systems (ADAS) and autonomous driving, an emerging and rapidly growing area. The book written by experts covers the most recent research results and industry progress in the following areas: ADAS system design and test methodologies, advanced materials, modern automotive technologies, artificial intelligence, reliability concerns, and failure analysis in ADAS. Numerous images, tables, and didactic schematics are included throughout. This essential book equips readers with an in-depth understanding of all aspects of ADAS, providing insights into key areas for future research and development. • Provides comprehensive coverage of the state-of-the-art in ADAS • Covers advanced materials, deep learning, quality and reliability concerns, and fault isolation and failure analysis • Discusses ADAS system design and test methodologies, novel automotive technologies • Features contributions from both academic and industry authors, for a complete view of this important technology

Download or read book Nanopackaging written by James E. Morris and published by Springer. This book was released on 2018-09-22 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of nanoscale electronics and systems packaging, and covers nanoscale structures, nanoelectronics packaging, nanowire applications in packaging, and offers a roadmap for future trends. Composite materials are studied for high-k dielectrics, resistors and inductors, electrically conductive adhesives, conductive "inks," underfill fillers, and solder enhancement. The book is intended for industrial and academic researchers, industrial electronics packaging engineers who need to keep abreast of progress in their field, and others with interests in nanotechnology. It surveys the application of nanotechnologies to electronics packaging, as represented by current research across the field.

Download or read book Thermal Management for LED Applications written by Clemens J.M. Lasance and published by Springer Science & Business Media. This book was released on 2013-09-17 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management for LED Applications provides state-of-the-art information on recent developments in thermal management as it relates to LEDs and LED-based systems and their applications. Coverage begins with an overview of the basics of thermal management including thermal design for LEDs, thermal characterization and testing of LEDs, and issues related to failure mechanisms and reliability and performance in harsh environments. Advances and recent developments in thermal management round out the book with discussions on advances in TIMs (thermal interface materials) for LED applications, advances in forced convection cooling of LEDs, and advances in heat sinks for LED assemblies.

Download or read book Proceedings of 5th Electronics Packaging Technology Conference EPTC 2003 written by and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Die Attach Materials for High Temperature Applications in Microelectronics Packaging written by Kim S. Siow and published by Springer. This book was released on 2019-01-29 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the scientific principles, processing conditions, probable failure mechanisms, and a description of reliability performance and equipment required for implementing high-temperature and lead-free die attach materials. In particular, it addresses the use of solder alloys, silver and copper sintering, and transient liquid-phase sintering. While different solder alloys have been used widely in the microelectronics industry, the implementation of sintering silver and transient liquid-phase sintering remains limited to a handful of companies. Hence, the book devotes many chapters to sintering technologies, while simultaneously providing only a cursory coverage of the more widespread techniques employing solder alloys. Addresses the differences between sintering and soldering (the current die-attach technologies), thereby comprehensively addressing principles, methods, and performance of these high-temperature die-attach materials; Emphasizes the industrial perspective, with chapters written by engineers who have hands-on experience using these technologies; Baker Hughes, Bosch and ON Semiconductor, are represented as well as materials suppliers such as Indium; Simultaneously provides the detailed science underlying these technologies by leading academic researchers in the field.

Download or read book Fundamentals of Lead Free Solder Interconnect Technology written by Tae-Kyu Lee and published by Springer. This book was released on 2014-11-05 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book provides an up-to-date overview of the concepts behind lead-free soldering techniques. Readers will find a description of the physical and mechanical properties of lead-free solders, in addition to lead-free electronics and solder alloys. Additional topics covered include the reliability of lead-free soldering, tin whiskering and electromigration, in addition to emerging technologies and research.

Download or read book Copper Wire Bonding written by Preeti S Chauhan and published by Springer Science & Business Media. This book was released on 2013-09-20 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical volume provides an in-depth presentation of copper wire bonding technologies, processes and equipment, along with the economic benefits and risks. Due to the increasing cost of materials used to make electronic components, the electronics industry has been rapidly moving from high cost gold to significantly lower cost copper as a wire bonding material. However, copper wire bonding has several process and reliability concerns due to its material properties. Copper Wire Bonding book lays out the challenges involved in replacing gold with copper as a wire bond material, and includes the bonding process changes—bond force, electric flame off, current and ultrasonic energy optimization, and bonding tools and equipment changes for first and second bond formation. In addition, the bond–pad metallurgies and the use of bare and palladium-coated copper wires on aluminum are presented, and gold, nickel and palladium surface finishes are discussed. The book also discusses best practices and recommendations on the bond process, bond–pad metallurgies, and appropriate reliability tests for copper wire-bonded electronic components. In summary, this book: Introduces copper wire bonding technologies Presents copper wire bonding processes Discusses copper wire bonding metallurgies Covers recent advancements in copper wire bonding including the bonding process, equipment changes, bond–pad materials and surface finishes Covers the reliability tests and concerns Covers the current implementation of copper wire bonding in the electronics industry Features 120 figures and tables Copper Wire Bonding is an essential reference for industry professionals seeking detailed information on all facets of copper wire bonding technology.

Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.