Download or read book Robotics in Natural Settings written by José M. Cascalho and published by Springer Nature. This book was released on 2022-08-24 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes recent research on climbing and walking robots. CLAWAR 2022 is the twenty-fifth International Conference Series on Climbing and Walking Robots and Mobile Machine Support Technologies. The conference is organized by CLAWAR Association in collaboration with the University of the Azores, S. Miguel, Portugal, during September 12-14, 2022. CLAWAR 2022 provides an updated state of the art on robotics and its use in a diversity of applications and/or simulation scenarios, within the framework “Robotics in Natural Settings”. The topics covered include Bio-Inspired Robotics, Biped Locomotion, Educational Robotics, Human-Machine/Human-Robot Interaction, Innovative Actuators, Inspection, Legged Locomotion, Modeling and Simulation of CLAWAR, Outdoor and Field Robotics, Planning and Control, Wearable Devices and Assistive Robotics, and the Use of A.I. in Robotics. The intended readership includes participants of CLAWAR 2022 conference, international robotic researchers, scientists, and professors of related topics worldwide, and professors and students of postgraduate courses in Robotics and Automation, Control Engineering, Mechanical Engineering, and Mechatronics.

Download or read book XV Mediterranean Conference on Medical and Biological Engineering and Computing MEDICON 2019 written by Jorge Henriques and published by Springer Nature. This book was released on 2019-09-24 with total page 2058 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of MEDICON 2019 – the XV Mediterranean Conference on Medical and Biological Engineering and Computing – which was held in September 26-28, 2019, in Coimbra, Portugal. A special emphasis has been given to practical findings, techniques and methods, aimed at fostering an effective patient empowerment, i.e. to position the patient at the heart of the health system and encourages them to be actively involved in managing their own healthcare needs. The book reports on research and development in electrical engineering, computing, data science and instrumentation, and on many topics at the interface between those disciplines. It provides academics and professionals with extensive knowledge on cutting-edge techniques and tools for detection, prevention, treatment and management of diseases. A special emphasis is given to effective advances, as well as new directions and challenges towards improving healthcare through holistic patient empowerment.

Download or read book Advanced Technologies in Modern Robotic Applications written by Chenguang Yang and published by Springer. This book was released on 2016-05-18 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in a systematic manner the advanced technologies used for various modern robot applications. By bringing fresh ideas, new concepts, novel methods and tools into robot control, robot vision, human robot interaction, teleoperation of robot and multiple robots system, we are to provide a state-of-the-art and comprehensive treatment of the advanced technologies for a wide range of robotic applications. Particularly, we focus on the topics of advanced control and obstacle avoidance techniques for robot to deal with unknown perturbations, of visual servoing techniques which enable robot to autonomously operate in a dynamic environment, and of advanced techniques involved in human robot interaction. The book is primarily intended for researchers and engineers in the robotic and control community. It can also serve as complementary reading for robotics at the both graduate and undergraduate levels.

Download or read book Intelligent Robotics and Applications written by Honghai Liu and published by Springer Nature. This book was released on 2022-08-03 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4-volume set LNAI 13455 - 13458 constitutes the proceedings of the 15th International Conference on Intelligent Robotics and Applications, ICIRA 2022, which took place in Harbin China, during August 2022. The 284 papers included in these proceedings were carefully reviewed and selected from 442 submissions. They were organized in topical sections as follows: Robotics, Mechatronics, Applications, Robotic Machining, Medical Engineering, Soft and Hybrid Robots, Human-robot Collaboration, Machine Intelligence, and Human Robot Interaction.

Download or read book Handbook of Fibrous Materials 2 Volumes written by Jinlian Hu and published by John Wiley & Sons. This book was released on 2020-03-18 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by a leading expert in the field with contributions from experienced researchers in fibers and textiles, this handbook reviews the current state of fibrous materials and provides a broad overview of their use in research and development. Volume One focuses on the classes of fibers, their production and characterization, while the second volume concentrates on their applications, including emerging ones in the areas of energy, environmental science and healthcare. Unparalleled knowledge of high relevance to academia and industry.

Download or read book Social Robotics written by Shuzhi Sam Ge and published by Springer. This book was released on 2018-11-26 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Social Robotics, ICSR 2018, held in Qingdao, China, in November 2018.The 60 full papers presented were carefully reviewed and selected from 79 submissions. The theme of the 2018 conference is: Social Robotics and AI. In addition to the technical sessions, ICSR 2018 included 2 workshops:Smart Sensing Systems: Towards Safe Navigation and Social Human-Robot Interaction of Service Robots.

Download or read book Intelligent Robotics and Applications written by Naoyuki Kubota and published by Springer. This book was released on 2016-08-02 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNAI 9834 and 9835 constitutes the refereed proceedings of the 9th International Conference on Intelligent Robotics and Applications, ICIRA 2016, held in Tokyo, Japan, in August 2016. The 114 papers presented were carefully reviewed and selected from 148 submissions. The papers are organized in topical sections such as Robot Control; Robot Mechanism, Robot Vision and Sensing; Planning, Localization, and Mapping; Interactive Intelligence; Cognitive Robotics; Bio-Inspired Robotics; Smart Material Based Systems; Mechatronics Systems for Nondestructive Testing; Social Robotics; Human Support Robotics; Assistive Robotics; Intelligent Space; Sensing and Monitoring in Environment and Agricultural Sciences; Human Data Analysis; Robot Hand.

Download or read book Intelligent Robotics and Applications written by Huayong Yang and published by Springer Nature. This book was released on 2023-10-15 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 9-volume set LNAI 14267-14275 constitutes the proceedings of the 16th International Conference on Intelligent Robotics and Applications, ICIRA 2023, which took place in Hangzhou, China, during July 5–7, 2023. The 413 papers included in these proceedings were carefully reviewed and selected from 630 submissions. They were organized in topical sections as follows: Part I: Human-Centric Technologies for Seamless Human-Robot Collaboration; Multimodal Collaborative Perception and Fusion; Intelligent Robot Perception in Unknown Environments; Vision-Based Human Robot Interaction and Application. Part II: Vision-Based Human Robot Interaction and Application; Reliable AI on Machine Human Reactions; Wearable Sensors and Robots; Wearable Robots for Assistance, Augmentation and Rehabilitation of Human Movements; Perception and Manipulation of Dexterous Hand for Humanoid Robot. Part III: Perception and Manipulation of Dexterous Hand for Humanoid Robot; Medical Imaging for Biomedical Robotics; Advanced Underwater Robot Technologies; Innovative Design and Performance Evaluation of Robot Mechanisms; Evaluation of Wearable Robots for Assistance and Rehabilitation; 3D Printing Soft Robots. Part IV: 3D Printing Soft Robots; Dielectric Elastomer Actuators for Soft Robotics; Human-like Locomotion and Manipulation; Pattern Recognition and Machine Learning for Smart Robots. Part V: Pattern Recognition and Machine Learning for Smart Robots; Robotic Tactile Sensation, Perception, and Applications; Advanced Sensing and Control Technology for Human-Robot Interaction; Knowledge-Based Robot Decision-Making and Manipulation; Design and Control of Legged Robots. Part VI: Design and Control of Legged Robots; Robots in Tunnelling and Underground Space; Robotic Machining of Complex Components; Clinically Oriented Design in Robotic Surgery and Rehabilitation; Visual and Visual-Tactile Perception for Robotics. Part VII: Visual and Visual-Tactile Perception for Robotics; Perception, Interaction, and Control of Wearable Robots; Marine Robotics and Applications; Multi-Robot Systems for Real World Applications; Physical and Neurological Human-Robot Interaction. Part VIII: Physical and Neurological Human-Robot Interaction; Advanced Motion Control Technologies for Mobile Robots; Intelligent Inspection Robotics; Robotics in Sustainable Manufacturing for Carbon Neutrality; Innovative Design and Performance Evaluation of Robot Mechanisms. Part IX: Innovative Design and Performance Evaluation of Robot Mechanisms; Cutting-Edge Research in Robotics.

Download or read book Frequency Measurement Technology written by Ignacio Llamas-Garro and published by Artech House. This book was released on 2017-12-31 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique first-of-its-kind resource provides practical coverage of the design and implementation of frequency measurement receivers, which aid in identifying unknown signals. The technologies used in frequency measurement interferometry-based on-delay lines and filters are explored in this book. Practitioners also find concrete examples of microwave photonics implementations. The designs and concepts that cover conventional photonic instantaneous frequency measurement (IFM) circuits are explained. This book provides details on new designs for microwave photonic circuits and reconfigurable frequency measurement (RFM) circuits using diodes and MicroElectroMechanical Systems (MEMS). This book explains the many diverse applications of frequency measurement that are used in defense, radar, and communications. The instrumentation used to perform frequency measurements is explained, including the use of block analysis for network and spectrum analyzers and calibration techniques. Readers learn the advantages of using frequency measurement based on microwave/RF techniques, including immunity to electromagnetic interference, low loss, compatibility with fiber signal distribution, and parallel processing signals. Moreover, readers gain insight into the future of frequency measurement receivers. The book examines both the underpinnings and the implementation of frequency measurement receivers using many diverse technological platforms.

Download or read book Smart Sensor Networks Using AI for Industry 4 0 written by Soumya Ranjan Nayak and published by CRC Press. This book was released on 2021-10-11 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Sensor Networks (WSNs) using AI have left a mark on the lives of all by aiding in various sectors, such as manufacturing, education, healthcare, and monitoring of the environment and industries. This book covers recent AI applications and explores aspects of modern sensor technologies and the systems needed to operate them. The book reviews the fundamental concepts of gathering, processing, and analyzing different AI-based models and methods. It covers recent WSN techniques for the purpose of effective network management on par with the standards laid out by international organizations in related fields and focuses on both core concepts along with major applicational areas. The book will be used by technical developers, academicians, data sciences, industrial professionals, researchers, and students interested in the latest innovations on problem-oriented processing techniques in sensor networks using IoT and evolutionary computer applications for Industry 4.0.

Download or read book Progress in Artificial Intelligence written by Paulo Moura Oliveira and published by Springer Nature. This book was released on 2019-09-03 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 19th EPIA Conference on Artificial Intelligence, EPIA 2019, held in Funchal, Madeira, Portugal, in September 2019. The 119 revised full papers and 6 short papers presented were carefully reviewed and selected from a total of 252 submissions. The papers are organized in 18 tracks devoted to the following topics: AIEd - Artificial Intelligence in Education, AI4G - Artificial Intelligence for Games, AIoTA - Artificial Intelligence and IoT in Agriculture, AIL - Artificial Intelligence and Law, AIM - Artificial Intelligence in Medicine, AICPDES - Artificial Intelligence in Cyber-Physical and Distributed Embedded Systems, AIPES - Artificial Intelligence in Power and Energy Systems, AITS - Artificial Intelligence in Transportation Systems, ALEA - Artificial Life and Evolutionary Algorithms, AmIA - Ambient Intelligence and Affective Environments, BAAI - Business Applications of Artificial Intelligence, GAI- General AI, IROBOT - Intelligent Robotics, KDBI - Knowledge Discovery and Business Intelligence, KRR - Knowledge Representation and Reasoning, MASTA - Multi-Agent Systems: Theory and Applications, SSM - Social Simulation and Modelling, TeMA - Text Mining and Applications.

Download or read book Ambient Assisted Living written by Niccolò Casiddu and published by Springer. This book was released on 2019-01-30 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the state of the art in the field of ambient assisted living (AAL), highlighting the impressive potential of novel methodologies and technologies to enhance well-being and promote active ageing. It covers a broad range of topics, with sections on technological sensors and platforms, social robotics for assistance, assistance and care applications, health and medical support methodologies and technologies, as well as the analysis, modelling and design of AAL services. The book comprises a selection of the best papers presented at the 8th Italian Forum on Ambient Assisted Living (ForitAAL 2017), which was held in Genoa, Italy, in June 2017 and brought together researchers, technology teams and professional associations, as well as representatives of the Italian regions and advisors to the Italian Ministry of Education, University and Research, with the goal of developing a consensus on how to improve provisions for the elderly and impaired. The respective contributions offer valuable insights into how the latest advances can help address the needs of the elderly and those with chronic health conditions. They also underscore the need for AAL to continue moving toward multidisciplinary integration, so as to embrace the various disciplines that place the user of services at the centre of the design process.

Download or read book Rapid Automation Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2019-03-01 with total page 1597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through expanded intelligence, the use of robotics has fundamentally transformed the business industry. Providing successful techniques in robotic design allows for increased autonomous mobility, which leads to a greater productivity and production level. Rapid Automation: Concepts, Methodologies, Tools, and Applications provides innovative insights into the state-of-the-art technologies in the design and development of robotics and their real-world applications in business processes. Highlighting a range of topics such as workflow automation tools, human-computer interaction, and swarm robotics, this multi-volume book is ideally designed for computer engineers, business managers, robotic developers, business and IT professionals, academicians, and researchers.

Download or read book Designing with Computational Intelligence written by Nadia Nedjah and published by Springer. This book was released on 2016-10-01 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses a number of real-world applications of computational intelligence approaches. Using various examples, it demonstrates that computational intelligence has become a consolidated methodology for automatically creating new competitive solutions to complex real-world problems. It also presents a concise and efficient synthesis of different systems using computationally intelligent techniques.

Download or read book Intelligent Robotics and Applications written by Xin-Jun Liu and published by Springer Nature. This book was released on 2021-10-19 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 4-volume set LNAI 13013 – 13016 constitutes the proceedings of the 14th International Conference on Intelligent Robotics and Applications, ICIRA 2021, which took place in Yantai, China, during October 22-25, 2021. The 299 papers included in these proceedings were carefully reviewed and selected from 386 submissions. They were organized in topical sections as follows: Robotics dexterous manipulation; sensors, actuators, and controllers for soft and hybrid robots; cable-driven parallel robot; human-centered wearable robotics; hybrid system modeling and human-machine interface; robot manipulation skills learning; micro_nano materials, devices, and systems for biomedical applications; actuating, sensing, control, and instrumentation for ultra-precision engineering; human-robot collaboration; robotic machining; medical robot; machine intelligence for human motion analytics; human-robot interaction for service robots; novel mechanisms, robots and applications; space robot and on-orbit service; neural learning enhanced motion planning and control for human robot interaction; medical engineering.

Download or read book Neural Engineering Techniques for Autism Spectrum Disorder written by Ayman S. El-Baz and published by Academic Press. This book was released on 2021-07-16 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural Engineering for Autism Spectrum Disorder, Volume One: Imaging and Signal Analysis Techniques presents the latest advances in neural engineering and biomedical engineering as applied to the clinical diagnosis and treatment of Autism Spectrum Disorder (ASD). Advances in the role of neuroimaging, infrared spectroscopy, sMRI, fMRI, DTI, social behaviors and suitable data analytics useful for clinical diagnosis and research applications for Autism Spectrum Disorder are covered, including relevant case studies. The application of brain signal evaluation, EEG analytics, feature selection, and analysis of blood oxygen level-dependent (BOLD) signals are presented for detection and estimation of the degree of ASD. - Presents applications of Neural Engineering and other Machine Learning techniques for the diagnosis of Autism Spectrum Disorder (ASD) - Includes in-depth technical coverage of imaging and signal analysis techniques, including coverage of functional MRI, neuroimaging, infrared spectroscopy, sMRI, fMRI, DTI, and neuroanatomy of autism - Covers Signal Analysis for the detection and estimation of Autism Spectrum Disorder (ASD), including brain signal analysis, EEG analytics, feature selection, and analysis of blood oxygen level-dependent (BOLD) signals for ASD - Written to help engineers, computer scientists, researchers and clinicians understand the technology and applications of Neural Engineering for the detection and diagnosis of Autism Spectrum Disorder (ASD)

Download or read book Crossmodal Correspondence written by Na Chen and published by Frontiers Media SA. This book was released on 2024-04-01 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: We live in a rich multisensory environment, in which we experience a continuous stream of sensory information coming from different sensory modalities, such as vision, sound, smell, touch, and taste. Our brains constantly encode, filter, and integrate that sensory information, and generate a unified perception of the world. However, how the brain processes and binds those sensory inputs are still unknown. Crossmodal correspondence refers to the tendency for normal observers to match distinct features or dimensions of experience across different sensory modalities (e.g., “bouba-kiki” effect). There has been a rapid growth of research interest in crossmodal correspondence over the last two decades. More and more crossmodal correspondences, within-modal correspondences, associations between sensory dimensions and concepts, and experiences have been identified. The congruency effect of crossmodal correspondences on facilitating sensory processing has also been highlighted.