Download or read book Architecture of Computing Systems ARCS 2015 written by Luís Miguel Pinho Pinho and published by Springer. This book was released on 2015-03-10 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 28th International Conference on Architecture of Computing Systems, ARCS 2015, held in Porto, Portugal, in March 2015. The 19 papers presented together with three invited papers were carefully reviewed and selected from 45 submissions. The papers are organized in six sessions covering the topics: hardware, design, applications, trust and privacy, real-time issues and a best papers session.
Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.
Download or read book Hardware Accelerator Systems for Artificial Intelligence and Machine Learning written by and published by Academic Press. This book was released on 2021-03-28 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardware Accelerator Systems for Artificial Intelligence and Machine Learning, Volume 122 delves into arti?cial Intelligence and the growth it has seen with the advent of Deep Neural Networks (DNNs) and Machine Learning. Updates in this release include chapters on Hardware accelerator systems for artificial intelligence and machine learning, Introduction to Hardware Accelerator Systems for Artificial Intelligence and Machine Learning, Deep Learning with GPUs, Edge Computing Optimization of Deep Learning Models for Specialized Tensor Processing Architectures, Architecture of NPU for DNN, Hardware Architecture for Convolutional Neural Network for Image Processing, FPGA based Neural Network Accelerators, and much more. - Updates on new information on the architecture of GPU, NPU and DNN - Discusses In-memory computing, Machine intelligence and Quantum computing - Includes sections on Hardware Accelerator Systems to improve processing efficiency and performance
Download or read book Supercomputing written by Vladimir Voevodin and published by Springer. This book was released on 2017-03-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second Russian Supercomputing Days, RuSCDays 2016, held in Moscow, Russia, in September 2016. The 28 revised full papers presented were carefully reviewed and selected from 94 submissions. The papers are organized in topical sections on the present of supercomputing: large tasks solving experience; the future of supercomputing: new technologies.
Download or read book Harnessing Performance Variability in Embedded and High performance Many Multi core Platforms written by William Fornaciari and published by Springer. This book was released on 2018-10-23 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the art of industrial and academic research in the architectural design of heterogeneous, multi/many-core processors. The authors describe methods and tools to enable next-generation embedded and high-performance heterogeneous processors to confront cost-effectively the inevitable variations by providing Dependable-Performance: correct functionality and timing guarantees throughout the expected lifetime of a platform under thermal, power, and energy constraints. Various aspects of the reliability problem are discussed, at both the circuit and architecture level, the intelligent selection of knobs and monitors in multicore platforms, and systematic design methodologies. The authors demonstrate how new techniques have been applied in real case studies from different applications domain and report on results and conclusions of those experiments. Enables readers to develop performance-dependable heterogeneous multi/many-core architectures Describes system software designs that support high performance dependability requirements Discusses and analyzes low level methodologies to tradeoff conflicting metrics, i.e. power, performance, reliability and thermal management Includes new application design guidelines to improve performance dependability
Download or read book Software Technologies written by Marten van Sinderen and published by Springer. This book was released on 2019-08-12 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 13th International Joint Conference on Software Technologies, ICSOFT 2018, held in Porto, Portugal, in July 2018. The 18 revised full papers were carefully reviewed and selected from 117 submissions. The topics covered in the papers include: business process modelling, IT service management, interoperability and service-oriented architecture, project management software, scheduling and estimating, software metrics, requirements elicitation and specification, software and systems integration, etc.
Download or read book Cyber Physical System Design from an Architecture Analysis Viewpoint written by Shin Nakajima and published by Springer. This book was released on 2017-05-10 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a wide variety of technologies for ensuring the safety and dependability of cyber-physical systems (CPS), this book offers a comprehensive introduction to the architecture-centric modeling, analysis, and verification of CPS. In particular, it focuses on model driven engineering methods including architecture description languages, virtual prototyping, and formal analysis methods. CPS are based on a new design paradigm intended to enable emerging software-intensive systems. Embedded computers and networks monitor and control the physical processes, usually with the help of feedback loops where physical processes affect computations and vice versa. The principal challenges in system design lie in this constant interaction of software, hardware and physics. Developing reliable CPS has become a critical issue for the industry and society, because many applications such as transportation, power distribution, medical equipment and tele-medicine are dependent on CPS. Safety and security requirements must be ensured by means of powerful validation tools. Satisfying such requirements, including quality of service, implies having formally proven the required properties of the system before it is deployed. The book is concerned with internationally standardized modeling languages such as AADL, SysML, and MARTE. As the effectiveness of the technologies is demonstrated with industrial sample cases from the automotive and aerospace sectors, links between the methods presented and industrial problems are clearly understandable. Each chapter is self-contained, addressing specific scientific or engineering problems, and identifying further issues. In closing, it includes perspectives on future directions in CPS design from an architecture analysis viewpoint.
Download or read book Embedded System Design written by Peter Marwedel and published by Springer. This book was released on 2017-07-26 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique feature of this textbook is to provide a comprehensive introduction to the fundamental knowledge in embedded systems, with applications in cyber-physical systems and the Internet of things. It starts with an introduction to the field and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, including real-time operating systems. The author also discusses evaluation and validation techniques for embedded systems and provides an overview of techniques for mapping applications to execution platforms, including multi-core platforms. Embedded systems have to operate under tight constraints and, hence, the book also contains a selected set of optimization techniques, including software optimization techniques. The book closes with a brief survey on testing. This third edition has been updated and revised to reflect new trends and technologies, such as the importance of cyber-physical systems and the Internet of things, the evolution of single-core processors to multi-core processors, and the increased importance of energy efficiency and thermal issues.
Download or read book Safe Autonomous and Intelligent Vehicles written by Huafeng Yu and published by Springer. This book was released on 2018-11-14 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the start-of-the-art research and development for the emerging area of autonomous and intelligent systems. In particular, the authors emphasize design and validation methodologies to address the grand challenges related to safety. This book offers a holistic view of a broad range of technical aspects (including perception, localization and navigation, motion control, etc.) and application domains (including automobile, aerospace, etc.), presents major challenges and discusses possible solutions.
Download or read book FPGA Algorithms and Applications for the Internet of Things written by Sharma, Preeti and published by IGI Global. This book was released on 2020-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the research area of computer science, practitioners are constantly searching for faster platforms with pertinent results. With analytics that span environmental development to computer hardware emulation, problem-solving algorithms are in high demand. Field-Programmable Gate Array (FPGA) is a promising computing platform that can be significantly faster for some applications and can be applied to a variety of fields. FPGA Algorithms and Applications for the Internet of Things provides emerging research exploring the theoretical and practical aspects of computable algorithms and applications within robotics and electronics development. Featuring coverage on a broad range of topics such as neuroscience, bioinformatics, and artificial intelligence, this book is ideally designed for computer science specialists, researchers, professors, and students seeking current research on cognitive analytics and advanced computing.
Download or read book Internetware written by Hong Mei and published by Springer. This book was released on 2016-12-01 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive introduction to Internetware, covering aspects ranging from the fundamental principles and engineering methodologies to operational platforms, quality measurements and assurance and future directions. It also includes guidelines and numerous representative real-world case studies that serve as an invaluable reference resource for software engineers involved in the development of Internetware applications. Providing a detailed analysis of current trends in modern software engineering in the Internet, it offers an essential blueprint and an important contribution to the research on software engineering and systems for future Internet computing.
Download or read book Parallel Computing On the Road to Exascale written by G.R. Joubert and published by IOS Press. This book was released on 2016-04-28 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: As predicted by Gordon E. Moore in 1965, the performance of computer processors increased at an exponential rate. Nevertheless, the increases in computing speeds of single processor machines were eventually curtailed by physical constraints. This led to the development of parallel computing, and whilst progress has been made in this field, the complexities of parallel algorithm design, the deficiencies of the available software development tools and the complexity of scheduling tasks over thousands and even millions of processing nodes represent a major challenge to the construction and use of more powerful parallel systems. This book presents the proceedings of the biennial International Conference on Parallel Computing (ParCo2015), held in Edinburgh, Scotland, in September 2015. Topics covered include computer architecture and performance, programming models and methods, as well as applications. The book also includes two invited talks and a number of mini-symposia. Exascale computing holds enormous promise in terms of increasing scientific knowledge acquisition and thus contributing to the future well-being and prosperity of mankind. A number of innovative approaches to the development and use of future high-performance and high-throughput systems are to be found in this book, which will be of interest to all those whose work involves the handling and processing of large amounts of data.
Download or read book Internet of Things written by Qusay F. Hassan and published by CRC Press. This book was released on 2017-12-15 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet of Things: Challenges, Advances, and Applications provides a comprehensive introduction to IoT, related technologies, and common issues in the adoption of IoT on a large scale. It surveys recent technological advances and novel solutions for challenges in the IoT environment. Moreover, it provides detailed discussion of the utilization of IoT and its underlying technologies in critical application areas, such as smart grids, healthcare, insurance, and the automotive industry. The chapters of this book are authored by several international researchers and industry experts. This book is composed of 18 self-contained chapters that can be read, based on interest. Features: Introduces IoT, including its history, common definitions, underlying technologies, and challenges Discusses technological advances in IoT and implementation considerations Proposes novel solutions for common implementation issues Explores critical application domains, including large-scale electric power distribution networks, smart water and gas grids, healthcare and e-Health applications, and the insurance and automotive industries The book is an excellent reference for researchers and post-graduate students working in the area of IoT, or related areas. It also targets IT professionals interested in gaining deeper knowledge of IoT, its challenges, and application areas.
Download or read book VLSI SoC Technology Advancement on SoC Design written by Victor Grimblatt and published by Springer Nature. This book was released on 2022-09-28 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended and revised versions of the best papers presented at the 29th IFIP WG 10.5/IEEE International Conference on Very Large Scale Integration, VLSI-SoC 2021, held in Singapore, in October 2021*. The 12 full papers included in this volume were carefully reviewed and selected from the 44 papers (out of 75 submissions) presented at the conference. The papers discuss the latest academic and industrial results and developments as well as future trends in the field of System-on-Chip (SoC) design, considering the challenges of nano-scale, state-of-the-art and emerging manufacturing technologies. In particular they address cutting-edge research fields like low-power design of RF, analog and mixed-signal circuits, EDA tools for the synthesis and verification of heterogenous SoCs, accelerators for cryptography and deep learning and on-chip Interconnection system, reliability and testing, and integration of 3D-ICs. *The conference was held virtually.
Download or read book Integration and Implementation of the Internet of Things Through Cloud Computing written by Tomar, Pradeep and published by IGI Global. This book was released on 2021-06-18 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internet of things (IoT) has drawn great attention from both academia and industry, since it offers a challenging notion of creating a world where all things around us are connected to the internet and communicate with each other with minimal human intervention. Another component for helping IoT to succeed is cloud computing. The combination of cloud computing and IoT will enable new monitoring services and powerful processing of sensory data streams. These applications, alongside implementation details and challenges, should also be explored for successful mainstream adoption. IoT is also fueled by the advancement of digital technologies, and the next generation era will be cloud-based IoT systems. Integration and Implementation of the Internet of Things Through Cloud Computing studies, analyzes, and presents cloud-based IoT-related technologies, protocols, and standards along with recent research and development in cloud-based IoT. It also presents recent emerging trends and technological advances of cloud-based IoT, innovative applications, and the challenges and implications for society. The chapters included take a strong look at the societal and social aspects of this technology along with its implementations and technological analyses. This book is intended for IT specialists, technologists, practitioners, researchers, academicians, and students who are interested in the next era of IoT through cloud computing.
Download or read book Recent Advances in Thermal Sciences and Engineering written by Hemant B. Mehta and published by Springer Nature. This book was released on 2023-05-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Advances in Fluid Flow and Thermal Sciences (ICAFFTS 2021) and summarizes the modern research practices in thermal sciences and engineering. The content of book involves advanced topics in heat transfer science, automobile, refrigeration and air conditioning, cryogenics, non-conventional systems and energy storage. Topics on cutting edge research in the area of hybrid nano-PCM-based systems, solar-based applications, bio-diesel and nano additives-based combustion, fuel cell and thermoacoustic engine are also included. In addition, this book contains recent research in the area of two-phase thermal management of Li-Ion/Li-titanium battery and LED systems using heat sink, heat pipe, pulsating heat pipe and thermosyphon with next-generation refrigerants, PCM and nanofluid. Some thermal aspects of virus/aerosol research, advances in volumetric velocimetry and application of artificial intelligence in thermal systems are also covered. This book is a valuable reference for academicians, researchers and professionals working in the various fields of thermal sciences.
Download or read book Internet of Things in Biomedical Engineering written by Valentina Emilia Balas and published by Academic Press. This book was released on 2019-06-14 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet of Things in Biomedical Engineering presents the most current research in Internet of Things (IoT) applications for clinical patient monitoring and treatment. The book takes a systems-level approach for both human-factors and the technical aspects of networking, databases and privacy. Sections delve into the latest advances and cutting-edge technologies, starting with an overview of the Internet of Things and biomedical engineering, as well as a focus on 'daily life.' Contributors from various experts then discuss 'computer assisted anthropology,' CLOUDFALL, and image guided surgery, as well as bio-informatics and data mining. This comprehensive coverage of the industry and technology is a perfect resource for students and researchers interested in the topic. - Presents recent advances in IoT for biomedical engineering, covering biometrics, bioinformatics, artificial intelligence, computer vision and various network applications - Discusses big data and data mining in healthcare and other IoT based biomedical data analysis - Includes discussions on a variety of IoT applications and medical information systems - Includes case studies and applications, as well as examples on how to automate data analysis with Perl R in IoT