Download or read book Power Electronics and Renewable Energy Systems written by C. Kamalakannan and published by Springer. This book was released on 2014-11-19 with total page 1546 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a collection of high-quality peer-reviewed research papers presented in the Proceedings of International Conference on Power Electronics and Renewable Energy Systems (ICPERES 2014) held at Rajalakshmi Engineering College, Chennai, India. These research papers provide the latest developments in the broad area of Power Electronics and Renewable Energy. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

Download or read book Power Management for Wearable Electronic Devices written by Dima Kilani and published by Springer Nature. This book was released on 2020-01-17 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes power management integrated circuits (PMIC), for power converters and voltage regulators necessary for energy efficient and small form factor systems. The authors discuss state-of-the-art PMICs not only for battery powered wearable devices, but also energy harvesting-based devices. The circuits presented support voltage scaling to reduce the overall average power consumption of a wearable device, resulting in longer device operating time. The discussion includes many designs, control techniques and approaches to distribute efficiently the power among different blocks in the device. • Demonstrates for readers how to innovate in designing power management integrated circuits (PMIC) suitable for wearable devices, powered by either battery or harvesting energy; • Introduces a dual outputs switched capacitor, using a single voltage regulator to minimize the area overhead and discusses the effect of having more than two outputs on the area and power efficiency; • Introduces a novel clock-less digital LDO regulator that eliminates the use of the clocked comparator and serial shift register in the conventional design; • Presents experimental results of energy harvesting-based power management units (PMU), using different combinations of power converters and voltage regulators, providing a guide for designers to select the appropriate option based on device requirements.

Download or read book Distribution Power Systems and Power Quality written by Birgitte Bak-Jensen and published by MDPI. This book was released on 2020-06-16 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: High penetration of fluctuating renewable power units, such as wind turbines and photo voltaic systems, and new heavy loads, such as electrical vehicles and heat pumps, which so far might not be controlled according to the actual distribution grid condition, but rather according to actual consumption of the devices, influences the distribution grid in several ways, and it may lead to voltage disturbances, frequency deviations and harmonic content beyond limits. Over voltages might be generated at power production which is too high, whereas under voltage might occur at heavy load situations; both phenomena might be seen at the same distribution radial, where harmonic injections can also come from the devices, if equipped with power converters. This has led to the main target object for this book being power quality in distribution grids. This book offers 10 papers regarding power quality issues at distribution grids. It looks into hosting capacity issues, stability analysis, reliability assessment, mitigation of voltage rise using reactor installation, power quality assessments, harmonic analysis and damping, frequency control in weak and isolated power systems, and the focus is therefore broad within the overall topic of power quality.

Download or read book Recent Advances in Power Electronics and Drives written by Krishna Murari and published by Springer Nature. This book was released on with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Power Electronics and Drives written by Shailendra Kumar and published by Springer Nature. This book was released on 2023-01-16 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the Electric Power and Renewable Energy Conference 2022 (EPREC-2022). It provides rigorous discussions, case studies, and recent developments in the emerging areas of power electronics, especially power inverters and converter, electrical drives, regulated power supplies, operation of FACTS and HVDC, etc. The readers would be benefited from enhancing their knowledge and skills in these domain areas. The book is a valuable reference for beginners, researchers, and professionals interested in advancements in power electronics and drives.

Download or read book Modular Multilevel Converters written by Sixing Du and published by John Wiley & Sons. This book was released on 2018-02-22 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable academic reference for the area of high-power converters, covering all the latest developments in the field High-power multilevel converters are well known in industry and academia as one of the preferred choices for efficient power conversion. Over the past decade, several power converters have been developed and commercialized in the form of standard and customized products that power a wide range of industrial applications. Currently, the modular multilevel converter is a fast-growing technology and has received wide acceptance from both industry and academia. Providing adequate technical background for graduate- and undergraduate-level teaching, this book includes a comprehensive analysis of the conventional and advanced modular multilevel converters employed in motor drives, HVDC systems, and power quality improvement. Modular Multilevel Converters: Analysis, Control, and Applications provides an overview of high-power converters, reference frame theory, classical control methods, pulse width modulation schemes, advanced model predictive control methods, modeling of ac drives, advanced drive control schemes, modeling and control of HVDC systems, active and reactive power control, power quality problems, reactive power, harmonics and unbalance compensation, modeling and control of static synchronous compensators (STATCOM) and unified power quality compensators. Furthermore, this book: Explores technical challenges, modeling, and control of various modular multilevel converters in a wide range of applications such as transformer and transformerless motor drives, high voltage direct current transmission systems, and power quality improvement Reflects the latest developments in high-power converters in medium-voltage motor drive systems Offers design guidance with tables, charts graphs, and MATLAB simulations Modular Multilevel Converters: Analysis, Control, and Applications is a valuable reference book for academic researchers, practicing engineers, and other professionals in the field of high power converters. It also serves well as a textbook for graduate-level students.

Download or read book Integrated Hybrid Resonant DCDC Converters written by Peter Renz and published by Springer Nature. This book was released on 2020-12-29 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive, single-source on resonant switched-capacitor converters. It is written in the style of a handbook, with systematic guidelines, and includes implementation examples. The authors explore integrated hybrid resonant DCDC converters in order to achieve highly compact, energy efficient and cost-effective power management solutions in the growing fields of wearables and internet-of-things applications. They provide an introduction into hybrid converters as a new and promising converter class, which merges capacitive and inductive conversion concepts into one. Coverage ranges from fundamentals to implementation details, including topics such as power stage design, gate drive schemes, different control mechanisms for resonant operation and integrated passives. Introduces a new, multi-ratio resonant converter architecture, which enables lower switching frequencies and better passive component utilization; Discusses circuit block design for high efficiency of the power stage; Explores implementation details and concepts for integrated passives; Derives models, implements and compares to each other different control mechanisms.

Download or read book Industrial Transformation written by Om Prakash Jena and published by CRC Press. This book was released on 2022-05-09 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on industrial development, design, implementation, and transformation using technologies such as Artificial Intelligence, Machine Learning, the Internet of Things (IoT), Big Data Analysis, and Blockchain. It incorporates complex processes, functions, and various other elements as one central component of digital systems. Industrial Transformation: Implementation and Essential Components and Processes of Digital Systems discusses the industry transformation aligned with the computerization of manufacturing and the required skills needed to build a new workforce. This book covers the role that AI plays in the management of resource flow and decision-making in the transformation of operations, as well as supply chain management. It presents sustainability and efficiency with IoT, Machine Learning, Data Analysis, and Blockchain technologies as it focuses on industrial development, design, and implementation. This book showcases the incorporation of complex processes and functions as one central component of digital systems and explores current trends that are working to accelerate industrial transformation. Case studies are also included, depicting the technologies that are influencing the transition into the fourth Industrial Revolution, such as industrial infrastructure, biodiversity, and enhanced productivity. This book is aimed at researchers, scholars, and students that require real-time knowledge and applications where the transformation and implementation of digital systems in the manufacturing sector are needed.

Download or read book Energy Harvesting for Wearable Sensor Systems written by Klevis Ylli and published by Springer Nature. This book was released on 2021-01-18 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates several non-resonant inductive harvester architectures in order to find the magnet coil arrangement that generates the largest power output. The book is useful as a step-by-step guide for readers unfamiliar with this form of energy harvesting, but who want to build their own system models to calculate the magnet motion and, from that, the power generation available for body-worn sensor systems. The detailed description of system model development will greatly facilitate experimental work with the aim of fabricating the design with the highest predicted power output. Based on the simulated optimal geometry, fabricated devices achieve an average power output of up to 43 mW during walking, an amount of power that can supply modern low-power, body-worn systems. Experiments were also carried out in industrial applications with power outputs up to 15 mW. In sum, researchers and engineers will find a step-by-step introduction to inductive harvesting and its modeling aspects for achieving optimal harvester designs in an efficient manner.

Download or read book Power Electronics and Electric Drives for Traction Applications written by Gonzalo Abad and published by John Wiley & Sons. This book was released on 2016-11-14 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Electric Drives for Traction Applications offers a practical approach to understanding power electronics applications in transportation systems ranging from railways to electric vehicles and ships. It is an application-oriented book for the design and development of traction systems accompanied by a description of the core technology. The first four introductory chapters describe the common knowledge and background required to understand the preceding chapters. After that, each application-specific chapter: highlights the significant manufacturers involved; provides a historical account of the technological evolution experienced; distinguishes the physics and mechanics; and where possible, analyses a real life example and provides the necessary models and simulation tools, block diagrams and simulation based validations. Key features: Surveys power electronics state-of-the-art in all aspects of traction applications. Presents vital design and development knowledge that is extremely important for the professional community in an original, simple, clear and complete manner. Offers design guidelines for power electronics traction systems in high-speed rail, ships, electric/hybrid vehicles, elevators and more applications. Application-specific chapters co-authored by traction industry expert. Learning supplemented by tutorial sections, case studies and MATLAB/Simulink-based simulations with data from practical systems. A valuable reference for application engineers in traction industry responsible for design and development of products as well as traction industry researchers, developers and graduate students on power electronics and motor drives needing a reference to the application examples.

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-23 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Impedance Source Power Electronic Converters written by Yushan Liu and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well as different industrial applications. Provides an overview of existing challenges, solutions and future trends. Supported by calculation examples, simulation models and results. Highly accessible, this is an invaluable resource for researchers, postgraduate/graduate students studying power electronics and its application in industry and renewable energy conversion as well as practising R&D engineers. Readers will be able to apply the presented material for the future design of the next generation of efficient power electronic converters/inverters.

Download or read book Design and Control of Grid Connected Photovoltaic System written by Ahteshamul Haque and published by CRC Press. This book was released on 2023-04-28 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current model for electricity generation and distribution is dominated by centralized power plants which are typically associated with combustion (coal, oil, and natural gas) or nuclear generation units. These power models require distribution from the center to outlying consumers and have many disadvantages concerning the electric utilities, transmission and distribution, and greenhouse gas emissions. This resulted in the modelling and development of cleaner renewable power generation with alternative sources such as photovoltaic (PV), wind, and other sources. Further, due to matured PV technology, constant drop-in installation cost, greenhouse emissions reductions, energy efficiency, reduced transmission and distribution investments, minimization of electric losses, and network support, the development of PV systems is proliferating. In view of this development, this book provides an idea for setting up the PV plant from initial study of the site to plan sizing. Once the first planning is covered, the book focuses on the modeling aspects of power electronics converter and control elements associated with it keeping the operating standards specified for the development of distributed generation systems in check. This book will be useful for industrial professionals and researchers who are working toward modeling of PV plants, and their control in grid connected operation. All the necessary information related to these fields is available in the book.

Download or read book Advances in Materials Research written by G. Kumaresan and published by Springer Nature. This book was released on 2021-02-04 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the International Conference on Advances in Materials Research (ICAMR 2019). The contents cover latest research in materials and their applications relevant to composites, metals, alloys, polymers, energy and phase change. The indigenous properties of materials including mechanical, electrical, thermal, optical, chemical and biological functions are discussed. The book also elaborates the properties and performance enhancement and/or deterioration in order of the modifications in atomic particles and structure. This book will be useful for both students and professionals interested in the development and applications of advanced materials.

Download or read book GaN SiC Power Technologies 5 written by K. Shenai and published by The Electrochemical Society. This book was released on 2015 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ICT and Data Sciences written by Archana Singh and published by CRC Press. This book was released on 2022-05-15 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the state-of-the-art research on data usage, security, and privacy in the scenarios of the Internet of Things (IoT), along with related applications using Machine Learning and Big Data technologies to design and make efficient Internet-compatible IoT systems. ICT and Data Sciences brings together IoT and Machine Learning and provides the careful integration of both, along with many examples and case studies. It illustrates the merging of two technologies while presenting basic to high-level concepts covering different fields and domains such as the Hospitality and Tourism industry, Smart Clothing, Cyber Crime, Programming, Communications, Business Intelligence, all in the context of the Internet of Things. The book is written for researchers and practitioners, working in Information Communication Technology and Computer Science.

Download or read book Proceedings of Symposium on Power Electronic and Renewable Energy Systems Control written by Sankarsan Mohapatro and published by Springer Nature. This book was released on 2021-07-09 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high-quality research papers presented at Symposium on Power Electronic and Renewable Energy Systems Control (PERESC 2020), which is held at the School of Electrical Sciences, IIT Bhubaneswar, Odisha, India, during 4–5 December 2020. The book covers original work in power electronics which has greatly enabled integration of renewable and distributed energy systems, control of electric machine drives, high voltage system control and operation. The book is highly useful for academicians, engineers, researchers and students to be familiar with the latest state of the art in power electronics technology and its applications.