Download or read book Proceedings of 15th International Conference on Electromechanics and Robotics Zavalishin s Readings written by Andrey Ronzhin and published by Springer Nature. This book was released on 2020-09-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected papers presented at the 15th International Conference on Electromechanics and Robotics “Zavalishin's Readings” – ER(ZR) 2020, held in Ufa, Russia, on 15–18 April 2020. The contributions, written by professionals, researchers and students, cover topics in the field of automatic control systems, electromechanics, electric power engineering and electrical engineering, mechatronics, robotics, automation and vibration technologies. The Zavalishin's Readings conference was established as a tribute to the memory of Dmitry Aleksandrovich Zavalishin (1900–1968) – a Russian scientist, corresponding member of the USSR Academy of Sciences and founder of the school of valve energy converters based on electric machines and valve converters energy. The first conference was organized by the Institute of Innovative Technologies in Electromechanics and Robotics at the Saint Petersburg State University of Aerospace Instrumentation in 2006.

Download or read book Rehabilitation Robotics written by Roberto Colombo and published by Academic Press. This book was released on 2018-03-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rehabilitation Robotics gives an introduction and overview of all areas of rehabilitation robotics, perfect for anyone new to the field. It also summarizes available robot technologies and their application to different pathologies for skilled researchers and clinicians. The editors have been involved in the development and application of robotic devices for neurorehabilitation for more than 15 years. This experience using several commercial devices for robotic rehabilitation has enabled them to develop the know-how and expertise necessary to guide those seeking comprehensive understanding of this topic. Each chapter is written by an expert in the respective field, pulling in perspectives from both engineers and clinicians to present a multi-disciplinary view. The book targets the implementation of efficient robot strategies to facilitate the re-acquisition of motor skills. This technology incorporates the outcomes of behavioral studies on motor learning and its neural correlates into the design, implementation and validation of robot agents that behave as 'optimal' trainers, efficiently exploiting the structure and plasticity of the human sensorimotor systems. In this context, human-robot interaction plays a paramount role, at both the physical and cognitive level, toward achieving a symbiotic interaction where the human body and the robot can benefit from each other's dynamics. - Provides a comprehensive review of recent developments in the area of rehabilitation robotics - Includes information on both therapeutic and assistive robots - Focuses on the state-of-the-art and representative advancements in the design, control, analysis, implementation and validation of rehabilitation robotic systems

Download or read book Rehabilitation Robotics Challenges in Design Control and Real Applications written by Francisco Romero Sánchez and published by Frontiers Media SA. This book was released on 2022-08-31 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bio Materials and Prototyping Applications in Medicine written by Paulo Jorge Bártolo and published by Springer Nature. This book was released on 2020-10-16 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is used to design and develop medical devices and instrumentation. This book details research in rapid prototyping of bio-materials for medical applications. It provides a wide variety of examples of medical applications using rapid prototyping, including tissue engineering, dental applications, and bone replacement. Coverage also discusses the emergence of computer aided design in the development of prosthetic devices.

Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer Nature. This book was released on 2019-10-25 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to familiarize readers with the latest research on, and recent advances in, the field of Informatics in Control, Automation and Robotics. It gathers a selection of papers highlighting the state-of-the-art in Intelligent Control Systems, Optimization, Robotics and Automation, Signal Processing, Sensors, Systems Modelling and Control. Combining theoretical aspects with practical applications, the book offers a well-balanced overview of the latest achievements, and will provide researchers, engineers and PhD students with both a vital update and new inspirations for their own research.

Download or read book Proceedings of the Future Technologies Conference FTC 2019 written by Kohei Arai and published by Springer Nature. This book was released on 2019-10-09 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art intelligent methods and techniques for solving real-world problemsand offers a vision of future research. Featuring 143 papers from the 4th Future Technologies Conference, held in San Francisco, USA, in 2019, it covers a wide range of important topics, including, but not limited to, computing, electronics, artificial intelligence, robotics, security and communications and their applications to the real world. As such, it is an interesting, exciting and inspiring read.

Download or read book Gravity Compensation in Robotics written by Vigen Arakelian and published by Springer Nature. This book was released on 2022-03-18 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents new research results in the field of gravity compensation in robotic systems. It explores topics such as gravity compensation of planar articulated robotic manipulators; the stiffness modeling of manipulators with gravity compensators; the multi-degree-of-freedom counter-balancing; the design of actuators with partial gravity compensation; a cable-driven robotic suit with gravity compensation for load carriage; various compensation systems for medical cobots and assistive devices; gravity balancing of parallel robots. The volume demonstrates that gravity compensation methods continue to develop, and new approaches and solutions are constantly being reported. These solutions apply both to new structural solutions and to their new applications. Cobots, exoskeletons and robotic suits, assistive devices, as well as biomechanical systems are among the most promising applications and most pressing areas for further innovation.

Download or read book Towards Digital Intelligence Society written by Ján Paralič and published by Springer Nature. This book was released on 2020-12-21 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to provide readers with up-to-date knowledge on how to make these technologies smarter. Humanity is now going through difficult times to fight the Covid-19 pandemic. Simultaneously, in these difficult times of physical separation, we can also realize how much digital society technology helps us cope with many difficulties that bring us this time. The authors focus on selected research challenges for intelligent digital society and state-of-the-art methods of how to face them. The book’s subtitle suggests that a core concept that the reader can study from various points of view in particular book chapters is the knowledge. The knowledge that can help us intelligently face different digital society challenges (Part I of this book); the knowledge extracted from available big data employing intelligent analysis techniques (Part II). For efficient processing and analysis of data, there is a strong need for smart data and information modeling techniques (Part III).

Download or read book Assistive Technologies E Book written by Albert M. Cook and published by Elsevier Health Sciences. This book was released on 2019-11-08 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the assistive strategies you need to make confident clinical decisions and help improve the quality of life for people with disabilities. Based on the Human Activity Assistive Technology (HAAT) model developed by Al Cook, Sue Hussey and Jan Polgar, Assistive Technologies: Principles & Practice, 5th Edition, provides detailed coverage of the broad range of devices, services, and practices that comprise assistive technology. This new text offers a systematic process for ensuring the effective application of assistive technologies — and focuses on the relationship between the human user and the assisted activity within specific contexts. It features over 30 new photos and illustrations, as well as, updated chapters and case studies that reflect current technology. Human Activity Assistive Technology (HAAT) framework locates assistive technology within common, everyday contexts for more relevant application. Focus on clinical application guides application of concepts to real-world situations. Study questions and chapter summaries in each chapter help assessment of understanding and identification of areas where more study is needed. Coverage of changing AT needs throughout the lifespan emphasizes how AT fits into people’s lives and contributes to their full participation in society. Principles and practice of assistive technology provide the foundation for effective reasoning. Ethical issues content provides vital information to guide AT service delivery. Explicit applications of the HAAT model in each of the chapters on specific technologies and more emphasis on the interactions among the elements make content even easier to understand. New! Thoroughly updated chapters to reflect current technology and practice. New! Expanded discussion on assistive robotics and smart technologies. New! Review of global initiatives on Assistive Technology. New! Updated art program with 30+ new photos and illustrations. New! Updated case studies to reflect changes in technology and practice since last edition.

Download or read book New Trends in Medical and Service Robotics written by Daniela Tarnita and published by Springer Nature. This book was released on 2023-05-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers of the 8th International Workshop on Medical and Service Robots (MESROB) which was held in Craiova, Romania, on June 7-10, 2023. The main topics include: design of medical devices, kinematics and dynamics for medical robotics, exoskeletons and prostheses, anthropomorphic hands, therapeutic robots and rehabilitation, cognitive robots, humanoid and service robots, assistive robots and elderly assistance, surgical robots, human-robot interfaces, haptic devices, medical treatments, medical lasers, and surgical planning and navigation. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists, demonstrating that medical and service robotics will drive the technological and societal change in the coming decades.

Download or read book AIxIA 2020 Advances in Artificial Intelligence written by Matteo Baldoni and published by Springer Nature. This book was released on 2021-05-21 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post proceedings of the XIXth International Conference of the Italian Association for Artificial Intelligence, AIxIA 2020, held in Milano, Italy, in November 2020.Due to the COVID-19 pandemic, the conference was "rebooted"/ re-organized w.r.t. the original format. The 27 full papers were carefully reviewed and selected from 89 submissions. The society aims at increasing the public awareness of Artificial Intelligence, encouraging the teaching and promoting research in the field.

Download or read book Social Robotics written by Shuzhi Sam Ge and published by Springer. This book was released on 2018-11-26 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Social Robotics, ICSR 2018, held in Qingdao, China, in November 2018.The 60 full papers presented were carefully reviewed and selected from 79 submissions. The theme of the 2018 conference is: Social Robotics and AI. In addition to the technical sessions, ICSR 2018 included 2 workshops:Smart Sensing Systems: Towards Safe Navigation and Social Human-Robot Interaction of Service Robots.

Download or read book Human Computer Interaction INTERACT 2017 written by Regina Bernhaupt and published by Springer. This book was released on 2017-09-19 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The four-volume set LNCS 10513—10516 constitutes the proceedings of the 16th IFIP TC 13 International Conference on Human-Computer Interaction, INTERACT 2017, held in Mumbai, India, in September 2017. The total of 68 papers presented in these books was carefully reviewed and selected from 221 submissions. The contributions are organized in topical sections named: Part I: adaptive design and mobile applications; aging and disabilities; assistive technology for blind users; audience engagement; co-design studies; cultural differences and communication technology; design rationale and camera-control. Part II: digital inclusion; games; human perception, cognition and behavior; information on demand, on the move, and gesture interaction; interaction at the workplace; interaction with children. Part III: mediated communication in health; methods and tools for user interface evaluation; multi-touch interaction; new int eraction techniques; personalization and visualization; persuasive technology and rehabilitation; and pointing and target selection.

Download or read book Wearable Robotics written by Jacob Rosen and published by Academic Press. This book was released on 2019-11-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wearable Robotics: Systems and Applications provides a comprehensive overview of the entire field of wearable robotics, including active orthotics (exoskeleton) and active prosthetics for the upper and lower limb and full body. In its two major sections, wearable robotics systems are described from both engineering perspectives and their application in medicine and industry. Systems and applications at various levels of the development cycle are presented, including those that are still under active research and development, systems that are under preliminary or full clinical trials, and those in commercialized products. This book is a great resource for anyone working in this field, including researchers, industry professionals and those who want to use it as a teaching mechanism. - Provides a comprehensive overview of the entire field, with both engineering and medical perspectives - Helps readers quickly and efficiently design and develop wearable robotics for healthcare applications

Download or read book Deep Learning for Unmanned Systems written by Anis Koubaa and published by Springer Nature. This book was released on 2021-10-01 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is used at the graduate or advanced undergraduate level and many others. Manned and unmanned ground, aerial and marine vehicles enable many promising and revolutionary civilian and military applications that will change our life in the near future. These applications include, but are not limited to, surveillance, search and rescue, environment monitoring, infrastructure monitoring, self-driving cars, contactless last-mile delivery vehicles, autonomous ships, precision agriculture and transmission line inspection to name just a few. These vehicles will benefit from advances of deep learning as a subfield of machine learning able to endow these vehicles with different capability such as perception, situation awareness, planning and intelligent control. Deep learning models also have the ability to generate actionable insights into the complex structures of large data sets. In recent years, deep learning research has received an increasing amount of attention from researchers in academia, government laboratories and industry. These research activities have borne some fruit in tackling some of the challenging problems of manned and unmanned ground, aerial and marine vehicles that are still open. Moreover, deep learning methods have been recently actively developed in other areas of machine learning, including reinforcement training and transfer/meta-learning, whereas standard, deep learning methods such as recent neural network (RNN) and coevolutionary neural networks (CNN). The book is primarily meant for researchers from academia and industry, who are working on in the research areas such as engineering, control engineering, robotics, mechatronics, biomedical engineering, mechanical engineering and computer science. The book chapters deal with the recent research problems in the areas of reinforcement learning-based control of UAVs and deep learning for unmanned aerial systems (UAS) The book chapters present various techniques of deep learning for robotic applications. The book chapters contain a good literature survey with a long list of references. The book chapters are well written with a good exposition of the research problem, methodology, block diagrams and mathematical techniques. The book chapters are lucidly illustrated with numerical examples and simulations. The book chapters discuss details of applications and future research areas.

Download or read book Biomechanical Principles on Force Generation and Control of Skeletal Muscle and their Applications in Robotic Exoskeleton written by Yuehong Yin and published by CRC Press. This book was released on 2019-09-05 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the bionic nature of force sensing and control, the biomechanical principle on mechanism of force generation and control of skeletal muscle, and related applications in robotic exoskeleton. The book focuses on three main aspects: muscle force generation principle and biomechanical model, exoskeleton robot technology based on skeletal muscle biomechanical model, and SMA-based bionic skeletal muscle technology. This comprehensive and in-depth book presents the author's research experience and achievements of many years to readers in an effort to promote academic exchanges in this field. About the Author Yuehong Yin received his B.E. , M.S. and Ph.D. degrees from Nanjing University of Aeronautics and Astronautics, Nanjing, in 1990, 1995 and 1997, respectively, all in mechanical engineering. From December 1997 to December 1999, he was a Postdoctoral Fellow with Zhejiang University, Hangzhou, China, where he became an Associate Professor in July 1999. Since December 1999, he has been with the Robotics Institute, Shanghai Jiao Tong University, Shanghai, China, where he became a Professor and a Tenure Professor in December 2005 and January 2016, respectively. His research interests include robotics, force control, exoskeleton robot, molecular motor, artificial limb, robotic assembly, reconfigurable assembly system, and augmented reality. Dr. Yin is a fellow of the International Academy of Production Engineering (CIRP).

Download or read book The Human Hand as an Inspiration for Robot Hand Development written by Ravi Balasubramanian and published by Springer. This book was released on 2014-01-03 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: “The Human Hand as an Inspiration for Robot Hand Development” presents an edited collection of authoritative contributions in the area of robot hands. The results described in the volume are expected to lead to more robust, dependable, and inexpensive distributed systems such as those endowed with complex and advanced sensing, actuation, computation, and communication capabilities. The twenty-four chapters discuss the field of robotic grasping and manipulation viewed in light of the human hand’s capabilities and push the state-of-the-art in robot hand design and control. Topics discussed include human hand biomechanics, neural control, sensory feedback and perception, and robotic grasp and manipulation. This book will be useful for researchers from diverse areas such as robotics, biomechanics, neuroscience, and anthropologists.