Download or read book High Performance Computing Systems Performance Modeling Benchmarking and Simulation written by Stephen A. Jarvis and published by Springer. This book was released on 2014-09-30 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Workshop, PMBS 2013 in Denver, CO, USA in November 2013. The 14 papers presented in this volume were carefully reviewed and selected from 37 submissions. The selected articles broadly cover topics on massively parallel and high-performance simulations, modeling and simulation, model development and analysis, performance optimization, power estimation and optimization, high performance computing, reliability, performance analysis, and network simulations.

Download or read book Programming Multicore and Many core Computing Systems written by Sabri Pllana and published by John Wiley & Sons. This book was released on 2017-01-23 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Programming multi-core and many-core computing systems Sabri Pllana, Linnaeus University, Sweden Fatos Xhafa, Technical University of Catalonia, Spain Provides state-of-the-art methods for programming multi-core and many-core systems The book comprises a selection of twenty two chapters covering: fundamental techniques and algorithms; programming approaches; methodologies and frameworks; scheduling and management; testing and evaluation methodologies; and case studies for programming multi-core and many-core systems. Program development for multi-core processors, especially for heterogeneous multi-core processors, is significantly more complex than for single-core processors. However, programmers have been traditionally trained for the development of sequential programs, and only a small percentage of them have experience with parallel programming. In the past, only a relatively small group of programmers interested in High Performance Computing (HPC) was concerned with the parallel programming issues, but the situation has changed dramatically with the appearance of multi-core processors on commonly used computing systems. It is expected that with the pervasiveness of multi-core processors, parallel programming will become mainstream. The pervasiveness of multi-core processors affects a large spectrum of systems, from embedded and general-purpose, to high-end computing systems. This book assists programmers in mastering the efficient programming of multi-core systems, which is of paramount importance for the software-intensive industry towards a more effective product-development cycle. Key features: Lessons, challenges, and roadmaps ahead. Contains real world examples and case studies. Helps programmers in mastering the efficient programming of multi-core and many-core systems. The book serves as a reference for a larger audience of practitioners, young researchers and graduate level students. A basic level of programming knowledge is required to use this book.

Download or read book Dataflow Processing written by and published by Academic Press. This book was released on 2015-02-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its first volume in 1960, Advances in Computers has presented detailed coverage of innovations in computer hardware, software, theory, design, and applications. It has also provided contributors with a medium in which they can explore their subjects in greater depth and breadth than journal articles usually allow. As a result, many articles have become standard references that continue to be of significant, lasting value in this rapidly expanding field. - In-depth surveys and tutorials on new computer technology - Well-known authors and researchers in the field - Extensive bibliographies with most chapters - Many of the volumes are devoted to single themes or subfields of computer science

Download or read book High Performance Computing written by Juan Luis Crespo-Mariño and published by Springer Nature. This book was released on 2020-02-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th Latin American High Performance Computing Conference, CARLA 2019, held in Turrialba, Costa Rica, in September 2019. The 32 revised full papers presented were carefully reviewed and selected out of 62 submissions. The papers included in this book are organized according to the conference tracks - regular track on high performance computing: applications; algorithms and models; architectures and infrastructures; and special track on bioinspired processing (BIP): neural and evolutionary approaches; image and signal processing; biodiversity informatics and computational biology.

Download or read book High Performance Computing written by Julian M. Kunkel and published by Springer. This book was released on 2015-06-19 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 30th International Conference, ISC High Performance 2015, [formerly known as the International Supercomputing Conference] held in Frankfurt, Germany, in July 2015. The 27 revised full papers presented together with 10 short papers were carefully reviewed and selected from 67 submissions. The papers cover the following topics: cost-efficient data centers, scalable applications, advances in algorithms, scientific libraries, programming models, architectures, performance models and analysis, automatic performance optimization, parallel I/O and energy efficiency.

Download or read book VLSI written by Tomasz Wojcicki and published by CRC Press. This book was released on 2017-12-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recently the world celebrated the 60th anniversary of the invention of the first transistor. The first integrated circuit (IC) was built a decade later, with the first microprocessor designed in the early 1970s. Today, ICs are a part of nearly every aspect of our daily lives. They help us live longer and more comfortably, and do more, faster. All this is possible because of the relentless search for new materials, circuit designs, and ideas happening on a daily basis at industrial and academic institutions around the globe. Showcasing the latest advances in very-large-scale integrated (VLSI) circuits, VLSI: Circuits for Emerging Applications provides a balanced view of industrial and academic developments beyond silicon and complementary metal–oxide–semiconductor (CMOS) technology. From quantum-dot cellular automata (QCA) to chips for cochlear implants, this must-have resource: Investigates the trend of combining multiple cores in a single chip to boost performance of the overall system Describes a novel approach to enable physically unclonable functions (PUFs) using intrinsic features of a VLSI chip Examines the VLSI implementations of major symmetric and asymmetric key cryptographic algorithms, hash functions, and digital signatures Discusses nonvolatile memories such as resistive random-access memory (Re-RAM), magneto-resistive RAM (MRAM), and floating-body RAM (FB-RAM) Explores organic transistors, soft errors, photonics, nanoelectromechanical (NEM) relays, reversible computation, bioinformatics, asynchronous logic, and more VLSI: Circuits for Emerging Applications presents cutting-edge research, design architectures, materials, and uses for VLSI circuits, offering valuable insight into the current state of the art of micro- and nanoelectronics.

Download or read book Versatile Cybersecurity written by Mauro Conti and published by Springer. This book was released on 2018-10-17 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber security research is one of the important areas in the computer science domain which also plays a major role in the life of almost every individual, enterprise, society and country, which this book illustrates. A large number of advanced security books focus on either cryptography or system security which covers both information and network security. However, there is hardly any books available for advanced-level students and research scholars in security research to systematically study how the major attacks are studied, modeled, planned and combated by the community. This book aims to fill this gap. This book provides focused content related to specific attacks or attack families. These dedicated discussions in the form of individual chapters covers the application or area specific aspects, while discussing the placement of defense solutions to combat the attacks. It includes eight high quality chapters from established security research groups worldwide, which address important attacks from theoretical (modeling) as well as practical aspects. Each chapter brings together comprehensive and structured information on an attack or an attack family. The authors present crisp detailing on the state of the art with quality illustration of defense mechanisms and open research problems. This book also covers various important attacks families such as insider threats, semantics social engineering attacks, distributed denial of service attacks, botnet based attacks, cyber physical malware based attacks, cross-vm attacks, and IoT covert channel attacks. This book will serve the interests of cyber security enthusiasts, undergraduates, post-graduates, researchers and professionals working in this field.

Download or read book Computational Science ICCS 2021 written by Maciej Paszynski and published by Springer Nature. This book was released on 2021-06-10 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. The six-volume set LNCS 12742, 12743, 12744, 12745, 12746, and 12747 constitutes the proceedings of the 21st International Conference on Computational Science, ICCS 2021, held in Krakow, Poland, in June 2021.* The total of 260 full papers and 57 short papers presented in this book set were carefully reviewed and selected from 635 submissions. 48 full and 14 short papers were accepted to the main track from 156 submissions; 212 full and 43 short papers were accepted to the workshops/ thematic tracks from 479 submissions. The papers were organized in topical sections named: Part I: ICCS Main Track Part II: Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Applications of Computational Methods in Artificial Intelligence and Machine Learning; Artificial Intelligence and High-Performance Computing for Advanced Simulations; Biomedical and Bioinformatics Challenges for Computer Science Part III: Classifier Learning from Difficult Data; Computational Analysis of Complex Social Systems; Computational Collective Intelligence; Computational Health Part IV: Computational Methods for Emerging Problems in (dis-)Information Analysis; Computational Methods in Smart Agriculture; Computational Optimization, Modelling and Simulation; Computational Science in IoT and Smart Systems Part V: Computer Graphics, Image Processing and Artificial Intelligence; Data-Driven Computational Sciences; Machine Learning and Data Assimilation for Dynamical Systems; MeshFree Methods and Radial Basis Functions in Computational Sciences; Multiscale Modelling and Simulation Part VI: Quantum Computing Workshop; Simulations of Flow and Transport: Modeling, Algorithms and Computation; Smart Systems: Bringing Together Computer Vision, Sensor Networks and Machine Learning; Software Engineering for Computational Science; Solving Problems with Uncertainty; Teaching Computational Science; Uncertainty Quantification for Computational Models *The conference was held virtually. Chapter “Intelligent Planning of Logistic Networks to Counteract Uncertainty Propagation” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com. Chapter: Modelling and Forecasting Based on Recurrent Pseudoinverse Matrices” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Transition of HPC Towards Exascale Computing written by E.H. D'Hollander and published by IOS Press. This book was released on 2013-10-22 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The US, Europe, Japan and China are racing to develop the next generation of supercomputers – exascale machines capable of 10 to the 18th power calculations a second – by 2020. But the barriers are daunting: the challenge is to change the paradigm of high-performance computing. The 2012 biennial high performance workshop, held in Cetraro, Italy in June 2012, focused on the challenges facing the computing research community to reach exascale performance in the next decade. This book presents papers from this workshop, arranged into four major topics: energy, scalability, new architectural concepts and programming of heterogeneous computing systems. Chapter 1 introduces the status of present supercomputers, which are still about two orders of magnitude separated from the exascale mark. Chapter 2 examines energy demands, a major limiting factor of today's fastest supercomputers; the quantum leap in performance required for exascale computing will require a shift in architectures and technology. In Chapter 3, scalable computer paradigms for dense linear algebra on massive heterogeneous systems are presented, and Chapter 4 discusses architectural concepts. Finally, Chapter 5 addresses the programming of heterogeneous systems. This book will be of interest to all those wishing to understand how the development of modern supercomputers is set to advance in the next decade.

Download or read book Computational Science and Its Applications ICCSA 2014 written by Beniamino Murgante and published by Springer. This book was released on 2014-07-02 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: The six-volume set LNCS 8579-8584 constitutes the refereed proceedings of the 14th International Conference on Computational Science and Its Applications, ICCSA 2014, held in Guimarães, Portugal, in June/July 2014. The 347 revised papers presented in 30 workshops and a special track were carefully reviewed and selected from 1167. The 289 papers presented in the workshops cover various areas in computational science ranging from computational science technologies to specific areas of computational science such as computational geometry and security.

Download or read book Proceedings of Fifth International Conference on Soft Computing for Problem Solving written by Millie Pant and published by Springer. This book was released on 2016-03-19 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of SocProS 2015 will serve as an academic bonanza for scientists and researchers working in the field of Soft Computing. This book contains theoretical as well as practical aspects using fuzzy logic, neural networks, evolutionary algorithms, swarm intelligence algorithms, etc., with many applications under the umbrella of ‘Soft Computing’. The book will be beneficial for young as well as experienced researchers dealing across complex and intricate real world problems for which finding a solution by traditional methods is a difficult task. The different application areas covered in the proceedings are: Image Processing, Cryptanalysis, Industrial Optimization, Supply Chain Management, Newly Proposed Nature Inspired Algorithms, Signal Processing, Problems related to Medical and Health Care, Networking Optimization Problems, etc.

Download or read book Handbook on Data Centers written by Samee U. Khan and published by Springer. This book was released on 2015-03-16 with total page 1309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook offers a comprehensive review of the state-of-the-art research achievements in the field of data centers. Contributions from international, leading researchers and scholars offer topics in cloud computing, virtualization in data centers, energy efficient data centers, and next generation data center architecture. It also comprises current research trends in emerging areas, such as data security, data protection management, and network resource management in data centers. Specific attention is devoted to industry needs associated with the challenges faced by data centers, such as various power, cooling, floor space, and associated environmental health and safety issues, while still working to support growth without disrupting quality of service. The contributions cut across various IT data technology domains as a single source to discuss the interdependencies that need to be supported to enable a virtualized, next-generation, energy efficient, economical, and environmentally friendly data center. This book appeals to a broad spectrum of readers, including server, storage, networking, database, and applications analysts, administrators, and architects. It is intended for those seeking to gain a stronger grasp on data center networks: the fundamental protocol used by the applications and the network, the typical network technologies, and their design aspects. The Handbook of Data Centers is a leading reference on design and implementation for planning, implementing, and operating data center networks.

Download or read book High Performance Computing for Geospatial Applications written by Wenwu Tang and published by Springer Nature. This book was released on 2020-07-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume fills a research gap between the rapid development of High Performance Computing (HPC) approaches and their geospatial applications. With a focus on geospatial applications, the book discusses in detail how researchers apply HPC to tackle their geospatial problems. Based on this focus, the book identifies the opportunities and challenges revolving around geospatial applications of HPC. Readers are introduced to the fundamentals of HPC, and will learn how HPC methods are applied in various specific areas of geospatial study. The book begins by discussing theoretical aspects and methodological uses of HPC within a geospatial context, including parallel algorithms, geospatial data handling, spatial analysis and modeling, and cartography and geovisualization. Then, specific domain applications of HPC are addressed in the contexts of earth science, land use and land cover change, urban studies, transportation studies, and social science. The book will be of interest to scientists and engineers who are interested in applying cutting-edge HPC technologies in their respective fields, as well as students and faculty engaged in geography, environmental science, social science, and computer science.

Download or read book Storage Systems written by Alexander Thomasian and published by Academic Press. This book was released on 2021-10-13 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Storage Systems: Organization, Performance, Coding, Reliability and Their Data Processing was motivated by the 1988 Redundant Array of Inexpensive/Independent Disks proposal to replace large form factor mainframe disks with an array of commodity disks. Disk loads are balanced by striping data into strips—with one strip per disk— and storage reliability is enhanced via replication or erasure coding, which at best dedicates k strips per stripe to tolerate k disk failures. Flash memories have resulted in a paradigm shift with Solid State Drives (SSDs) replacing Hard Disk Drives (HDDs) for high performance applications. RAID and Flash have resulted in the emergence of new storage companies, namely EMC, NetApp, SanDisk, and Purestorage, and a multibillion-dollar storage market. Key new conferences and publications are reviewed in this book.The goal of the book is to expose students, researchers, and IT professionals to the more important developments in storage systems, while covering the evolution of storage technologies, traditional and novel databases, and novel sources of data. We describe several prototypes: FAWN at CMU, RAMCloud at Stanford, and Lightstore at MIT; Oracle's Exadata, AWS' Aurora, Alibaba's PolarDB, Fungible Data Center; and author's paper designs for cloud storage, namely heterogeneous disk arrays and hierarchical RAID. - Surveys storage technologies and lists sources of data: measurements, text, audio, images, and video - Familiarizes with paradigms to improve performance: caching, prefetching, log-structured file systems, and merge-trees (LSMs) - Describes RAID organizations and analyzes their performance and reliability - Conserves storage via data compression, deduplication, compaction, and secures data via encryption - Specifies implications of storage technologies on performance and power consumption - Exemplifies database parallelism for big data, analytics, deep learning via multicore CPUs, GPUs, FPGAs, and ASICs, e.g., Google's Tensor Processing Units

Download or read book Software Engineering for Science written by Jeffrey C. Carver and published by CRC Press. This book was released on 2016-11-03 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Science provides an in-depth collection of peer-reviewed chapters that describe experiences with applying software engineering practices to the development of scientific software. It provides a better understanding of how software engineering is and should be practiced, and which software engineering practices are effective for scientific software. The book starts with a detailed overview of the Scientific Software Lifecycle, and a general overview of the scientific software development process. It highlights key issues commonly arising during scientific software development, as well as solutions to these problems. The second part of the book provides examples of the use of testing in scientific software development, including key issues and challenges. The chapters then describe solutions and case studies aimed at applying testing to scientific software development efforts. The final part of the book provides examples of applying software engineering techniques to scientific software, including not only computational modeling, but also software for data management and analysis. The authors describe their experiences and lessons learned from developing complex scientific software in different domains. About the Editors Jeffrey Carver is an Associate Professor in the Department of Computer Science at the University of Alabama. He is one of the primary organizers of the workshop series on Software Engineering for Science (http://www.SE4Science.org/workshops). Neil P. Chue Hong is Director of the Software Sustainability Institute at the University of Edinburgh. His research interests include barriers and incentives in research software ecosystems and the role of software as a research object. George K. Thiruvathukal is Professor of Computer Science at Loyola University Chicago and Visiting Faculty at Argonne National Laboratory. His current research is focused on software metrics in open source mathematical and scientific software.

Download or read book Distributed and Cloud Computing written by Kai Hwang and published by Morgan Kaufmann. This book was released on 2013-12-18 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed and Cloud Computing: From Parallel Processing to the Internet of Things offers complete coverage of modern distributed computing technology including clusters, the grid, service-oriented architecture, massively parallel processors, peer-to-peer networking, and cloud computing. It is the first modern, up-to-date distributed systems textbook; it explains how to create high-performance, scalable, reliable systems, exposing the design principles, architecture, and innovative applications of parallel, distributed, and cloud computing systems. Topics covered by this book include: facilitating management, debugging, migration, and disaster recovery through virtualization; clustered systems for research or ecommerce applications; designing systems as web services; and social networking systems using peer-to-peer computing. The principles of cloud computing are discussed using examples from open-source and commercial applications, along with case studies from the leading distributed computing vendors such as Amazon, Microsoft, and Google. Each chapter includes exercises and further reading, with lecture slides and more available online. This book will be ideal for students taking a distributed systems or distributed computing class, as well as for professional system designers and engineers looking for a reference to the latest distributed technologies including cloud, P2P and grid computing. - Complete coverage of modern distributed computing technology including clusters, the grid, service-oriented architecture, massively parallel processors, peer-to-peer networking, and cloud computing - Includes case studies from the leading distributed computing vendors: Amazon, Microsoft, Google, and more - Explains how to use virtualization to facilitate management, debugging, migration, and disaster recovery - Designed for undergraduate or graduate students taking a distributed systems course—each chapter includes exercises and further reading, with lecture slides and more available online

Download or read book User Centric and Information Centric Networking and Services written by M. Bala Krishna and published by CRC Press. This book was released on 2019-04-29 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: User-Centric Networks (UCN) and Information-Centric Networks (ICN) are new communication paradigms to increase the efficiency of content delivery and also content availability. In this new concept, the network infrastructure actively contributes to content caching and distribution. This book presents the basic concepts of UCN and ICN, describes the main architecture proposals for these networks, and discusses the main challenges to their development. The book also looks at the current challenges for this concept, including naming, routing and caching on the network-core elements, several aspects of content security, user privacy, and practical issues in implementing UCN and ICN.