Download or read book 2009 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report written by and published by . This book was released on 2009 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes comments from the Peer Review Panel at the 2009 DOE Hydrogen Program Annual Merit Review, held on May 18-22, 2009, in Arlington, Virginia. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; education; safety, codes, and standards; technology validation; systems analysis; and manufacturing R & D.

Download or read book Review of the Research Program of the FreedomCAR and Fuel Partnership written by National Research Council and published by National Academies Press. This book was released on 2010-11-23 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The public-private partnership to develop vehicles that require less petroleum-based fuel and emit fewer greenhouse gases should continue to include fuel cells and other hydrogen technologies in its research and development portfolio. The third volume in the FreedomCAR series states that, although the partnership's recent shift of focus toward technologies that could be ready for use in the nearer term-such as advanced combustion engines and plug-in electric vehicles-is warranted, R&D on hydrogen and fuel cells is also needed given the high costs and challenges that many of the technologies must overcome before widespread use. The FreedomCAR (Cooperative Automotive Research) and Fuel Partnership is a research collaboration among the U.S. Department of Energy, the United States Council for Automotive Research - whose members are the Detroit automakers-five major energy companies, and two electric utility companies. The partnership seeks to advance the technologies essential for components and infrastructure for a full range of affordable, clean, energy efficient cars and light trucks. Until recently, the program primarily focused on developing technologies that would allow U.S. automakers to make production and marketing decisions by 2015 on hydrogen fuel cell-powered vehicles. These vehicles have the potential to be much more energy-efficient than conventional gasoline-powered vehicles, produce no harmful tailpipe emissions, and significantly reduce petroleum use. In 2009, the partnership changed direction and stepped up efforts to advance, in the shorter term, technologies for reducing petroleum use in combustion engines, including those using biofuels, as well as batteries that could be used in plug-in hybrid-electric or all electric vehicles.

Download or read book Energy and Water Development Appropriations for 2009 written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2008 with total page 1840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy and Water Development Appropriations for 2011 Dept of Energy fiscal year 2011 justifications written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2010 with total page 1692 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrogen and Fuel Cells written by International Energy Agency and published by Simon and Schuster. This book was released on 2004 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen and fuel cells are vital technologies to ensure a secure and CO2-free energy future. Their development will take decades of extensive public and private effort to achieve technology breakthroughs and commercial maturity. Government research programs are indispensable for catalyzing the development process. This report maps the IEA countries' current efforts to research, develop and deploy the interlocking elements that constitute a "hydrogen economy", including CO2 capture and storage when hydrogen is produced out of fossil fuels. It provides an overview of what is being done, and by whom, covering an extensive complexity of national government R & D programs. The survey highlights the potential for exploiting the benefits of the international cooperation. This book draws primarily upon information contributed by IEA governments. In virtually all the IEA countries, important R & D and policy efforts on hydrogen and fuel cells are in place and expanding. Some are fully-integrated, government-funded programs, some are a key element in an overall strategy spread among multiple public and private efforts. The large amount of information provided in this publication reflects the vast array of technologies and logistics required to build the "hydrogen economy."--Publisher description.

Download or read book 2010 DOE Hydrogen Program Annual Merit Review and Peer Evaluation Report written by and published by . This book was released on 2010 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes comments from the Peer Review Panel at the 2010 DOE Hydrogen Program Annual Merit Review, held on June 7-11, 2010, in Washington, DC. It covers the program areas of hydrogen production and delivery; hydrogen storage; fuel cells; manufacturing R & D; technology validation; safety, codes, and standards; education; and systems analysis.

Download or read book Compendium of Hydrogen Energy written by Ram Gupta and published by Woodhead Publishing. This book was released on 2016-02-03 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compendium of Hydrogen Energy, Volume 2: Hydrogen Storage, Distribution and Infrastructure focuses on the storage and transmission of hydrogen. As many experts believe the hydrogen economy will, at some point, replace the fossil fuel economy as the primary source of the world's energy, this book details hydrogen storage in pure form, including chapters on hydrogen liquefaction, slush production, as well as underground and pipeline storage. Other sections in the book explore physical and chemical storage, including environmentally sustainable methods of hydrogen production from water, with final chapters dedicated to hydrogen distribution and infrastructure. - Covers a wide array of methods for storing hydrogen, detailing hydrogen transport and the infrastructure required for transition to the hydrogen economy - Written by leading academics in the fields of sustainable energy and experts from the world of industry - Part of a very comprehensive compendium which looks at the entirety of the hydrogen energy economy

Download or read book Carbon Fiber written by Pratima Bajpai and published by Elsevier. This book was released on 2020-11-25 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Fiber, Second Edition, brings together available information on the production, properties, application and future of carbon fibers. This book will be of interest to those involved in the investigation of carbon fiber, carbon fiber manufacturing, and users. In addition, the recycling of carbon fiber reinforced polymers and the manufacturing of composites from recycled carbon fiber reinforced polymers are discussed. The book offers in-depth coverage on the production of carbon fiber and the global carbon fiber market, demand and major growth drivers. Carbon structures from biowaste, waste lignin and novel processes to obtain high purity lignin are presented, along with future directions. - Provides thorough and in-depth coverage of carbon fiber production - Presents the global carbon fiber market, demand and major growth drivers - Covers carbon structures from biowaste and waste lignin - Discusses novel process to obtain high purity lignin - Includes discussions of future directions for the carbon fiber industry

Download or read book Hydrogen Science and Engineering written by Detlef Stolten and published by John Wiley & Sons. This book was released on 2016-01-04 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by 50 top academic, government and industry researchers, this handbook explores mature, evolving technologies for a clean, economically viable alternative to non-renewable energy. In so doing, it also discusses such broader topics as the environmental impact, education, safety and regulatory developments. The text is all-encompassing, covering a wide range that includes hydrogen as an energy carrier, hydrogen for storage of renewable energy, and incorporating hydrogen technologies into existing technologies.

Download or read book Diesel Emissions and Their Control 2nd Edition written by W. Addy Majewski and published by SAE International. This book was released on 2023-12-20 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers, applied scientists, students, and individuals working to reduceemissions and advance diesel engine technology will find the secondedition of Diesel Emissions and Their Control to be an indispensablereference. Whether readers are at the outset of their learning journey orseeking to deepen their expertise, this comprehensive reference bookcaters to a wide audience.In this substantial update to the 2006 classic, the authors have expandedthe coverage of the latest emission technologies. With the industryevolving rapidly, the book ensures that readers are well-informed aboutthe most recent advances in commercial diesel engines, providing acompetitive edge in their respective fields. The second edition has alsostreamlined the content to focus on the most promising technologies.This book is rooted in the wealth of information available on DieselNet.com, where the “Technology Guide” papers offer in-depth insights. Eachchapter includes links to relevant online materials, granting readers accessto even more expertise and knowledge.The second edition is organized into six parts, providing a structuredjourney through every aspect of diesel engines and emissions control: Part I: A foundational exploration of the diesel engine, combustion, andessential subsystems. Part II: An in-depth look at emission characterization, health andenvironmental impacts, testing methods, and global regulations. Part III: A comprehensive overview of diesel fuels, covering petroleumdiesel, alternative fuels, and engine lubricants. Part IV: An exploration of engine efficiency and emission controltechnologies, from exhaust gas recirculation to engine control. Part V: The latest developments in diesel exhaust aftertreatment,encompassing catalyst technologies and particulate filters. Part VI: A historical journey through the evolution of dieselengine technology, with a focus on heavy-duty engines in the NorthAmerican market. (ISBN 9781468605693, ISBN 9781468605709, ISBN 9781468605716, DOI: 10.4271/9781468605709)

Download or read book Energy and Water Development Appropriations for 2009 Dept of Energy fiscal year 2009 justifications budget highlights NNSA energy supply and conservation written by United States. Congress. House. Committee on Appropriations. Subcommittee on Energy and Water Development and published by . This book was released on 2008 with total page 1844 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced High Strength Steels written by Mahmoud Y. Demeri and published by ASM International. This book was released on 2013-08-01 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the types, microstructures and attributes of AHSSAlso reviews the current and future applications, the benefits, trends and environmental and sustainability issues.

Download or read book Carbon Fibre from Lignin written by Pratima Bajpai and published by Springer. This book was released on 2017-03-20 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents detailed information on the production and properties of carbon fibers derived from lignin precursors. Focusing on future directions in the carbon fiber industry, it also introduces a novel process for obtaining high-purity lignin, a key aspect in the manufacture of high-quality carbon fiber. Carbon fiber is currently the most preferred lightweight manufacturing material and is rapidly becoming the material of choice for manufacturers around the world. Although more than 80% of commercial carbon fiber is estimated to use PAN (polyacrylonitrile) as a precursor, carbon fiber manufactured from PAN is expensive and therefore its application is limited to high-performance structural materials. Lignin is the second most abundant biopolymer in nature after cellulose and offers a carbon-rich, renewable resource. As a byproduct of the pulp and paper industry and the production of cellulosic ethanol, lignin is also available at low cost, making it an economically attractive alternative to PAN for the production of carbon fibers, as highlighted in this book. The information presented will be of interest to all those involved in the investigation of carbon fiber materials, carbon fiber manufacturers and carbon fiber users.

Download or read book Switching Power Converters written by Dorin O. Neacsu and published by CRC Press. This book was released on 2017-12-19 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: An examination of all of the multidisciplinary aspects of medium- and high-power converter systems, including basic power electronics, digital control and hardware, sensors, analog preprocessing of signals, protection devices and fault management, and pulse-width-modulation (PWM) algorithms, Switching Power Converters: Medium and High Power, Second Edition discusses the actual use of industrial technology and its related subassemblies and components, covering facets of implementation otherwise overlooked by theoretical textbooks. The updated Second Edition contains many new figures, as well as new and/or improved chapters on: Thermal management and reliability Intelligent power modules AC/DC and DC/AC current source converters Multilevel converters Use of IPM within a "network of switches" concept Power semiconductors Matrix converters Practical aspects in building power converters Providing the latest research and development information, along with numerous examples of successful home appliance, aviation, naval, automotive electronics, industrial motor drive, and grid interface for renewable energy products, this edition highlights advancements in packaging technologies, tackles the advent of hybrid circuits able to incorporate control and power stages within the same package, and examines design for reliability from the system level perspective.

Download or read book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-06-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.

Download or read book Encyclopedia of Automotive Engineering written by and published by John Wiley & Sons. This book was released on 2015-03-23 with total page 3888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Erstmals eine umfassende und einheitliche Wissensbasis und Grundlage für weiterführende Studien und Forschung im Bereich der Automobiltechnik. Die Encyclopedia of Automotive Engineering ist die erste umfassende und einheitliche Wissensbasis dieses Fachgebiets und legt den Grundstein für weitere Studien und tiefgreifende Forschung. Weitreichende Querverweise und Suchfunktionen ermöglichen erstmals den zentralen Zugriff auf Detailinformationen zu bewährten Branchenstandards und -verfahren. Zusammenhängende Konzepte und Techniken aus Spezialbereichen lassen sich so einfacher verstehen. Neben traditionellen Themen des Fachgebiets beschäftigt sich diese Enzyklopädie auch mit "grünen" Technologien, dem Übergang von der Mechanik zur Elektronik und den Möglichkeiten zur Herstellung sicherer, effizienterer Fahrzeuge unter weltweit unterschiedlichen wirtschaftlichen Rahmenbedingungen. Das Referenzwerk behandelt neun Hauptbereiche: (1) Motoren: Grundlagen; (2) Motoren: Design; (3) Hybrid- und Elektroantriebe; (4) Getriebe- und Antriebssysteme; (5) Chassis-Systeme; (6) Elektrische und elektronische Systeme; (7) Karosserie-Design; (8) Materialien und Fertigung; (9) Telematik. - Zuverlässige Darstellung einer Vielzahl von Spezialthemen aus dem Bereich der Automobiltechnik. - Zugängliches Nachschlagewerk für Jungingenieure und Studenten, die die technologischen Grundlagen besser verstehen und ihre Kenntnisse erweitern möchten. - Wertvolle Verweise auf Detailinformationen und Forschungsergebnisse aus der technischen Literatur. - Entwickelt in Zusammenarbeit mit der FISITA, der Dachorganisation nationaler Automobil-Ingenieur-Verbände aus 37 Ländern und Vertretung von über 185.000 Ingenieuren aus der Branche. - Erhältlich als stets aktuelle Online-Ressource mit umfassenden Suchfunktionen oder als Print-Ausgabe in sechs Bänden mit über 4.000 Seiten. Ein wichtiges Nachschlagewerk für Bibliotheken und Informationszentren in der Industrie, bei Forschungs- und Schulungseinrichtungen, Fachgesellschaften, Regierungsbehörden und allen Ingenieurstudiengängen. Richtet sich an Fachingenieure und Techniker aus der Industrie, Studenten höherer Semester und Studienabsolventen, Forscher, Dozenten und Ausbilder, Branchenanalysen und Forscher.

Download or read book Hybridization Diagnostic and Prognostic of PEM Fuel Cells written by Samir Jemei and published by John Wiley & Sons. This book was released on 2018-10-25 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen is the most abundant element in the universe. It has a place in the energy mix of the future, especially regarding fuel cells (FCs). This book is an investigation into FCs. Prominence is given to the subject of PEMFCs (proton exchange membrane fuel cells) as they offer interesting perspectives on transport and stationary applications. This being said, a number of technological and scientific obstacles remain to be overcome before an industrial level of development can be reached.