Download or read book Variable Structure Systems and Sliding Mode Control written by Martin Steinberger and published by Springer Nature. This book was released on 2020-02-10 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the latest theoretical results and sophisticated applications in the field of variable-structure systems and sliding-mode control. This book is divided into four parts. Part I discusses new higher-order sliding-mode algorithms, including new homogeneous controllers and differentiators. Part II then explores properties of continuous sliding-mode algorithms, such as saturated feedback control, reaching time, and orbital stability. Part III is focused on the usage of variable-structure systems (VSS) controllers for solving other control problems, for example unmatched disturbances. Finally, Part IV discusses applications of VSS; these include applications within power electronics and vehicle platooning. Variable-structure Systems and Sliding-Mode Control will be of interest to academic researchers, students and practising engineers.

Download or read book Advances in Variable Structure Systems and Sliding Mode Control Theory and Applications written by Shihua Li and published by Springer. This book was released on 2017-08-10 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest developments in variable structure systems (VSS) and sliding mode control (SMC), highlighting advances in various branches of the VSS/SMC field, e.g., from conventional SMC to high-order SMC, from the continuous-time domain to the discrete-time domain, from theories to applications, etc. The book consists of three parts and 16 chapters: in the first part, new VSS/SMC algorithms are proposed and their properties are analyzed, while the second focuses on the use of VSS/SMC techniques to solve a variety of control problems; the third part examines the applications of VSS/SMC to real-time systems. The book introduces postgraduates and researchers to the state-of-the-art in VSS/SMC field, including the theory, methodology, and applications. Relative academic disciplines include Automation, Mathematics, Electrical Engineering, Mechanical Engineering, Instrument Science and Engineering, Electronic Engineering, Computer Science and Technology, Transportation Engineering, Energy and Power Engineering, etc.

Download or read book Control and Nonlinear Dynamics on Energy Conversion Systems written by Herbert Ho-Ching Iu and published by MDPI. This book was released on 2019-07-01 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers. This research has demonstrated that these systems can become unstable with a direct result in increased losses, extra subharmonics, and even uncontrollability/unobservability. The detailed study of these systems can help in the design of smaller, lighter, and less expensive converters that are particularly important in emerging areas of research like electric vehicles, smart grids, renewable energy sources, and others. The aim of this Special Issue is to cover control and nonlinear aspects of instabilities in different energy conversion systems: theoretical, analysis modelling, and practical solutions for such emerging applications. In this Special Issue, we present novel research works in different areas of the control and nonlinear dynamics of energy conversion systems.

Download or read book Sliding Mode Control and Variable Structure Systems written by Tiago Roux Oliveira and published by Springer Nature. This book was released on 2023-12-02 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the latest developments in sliding-mode control (SMC) and variable-structure systems (VSS), comprising contributions by leading researchers and an international range of experts. Such contributions highlight advances in various branches of the field—conventional and higher-order SMC with continuous- and discrete-time implementation and theory and applications both receive attention. The book consists of six parts. In the first, new SMC/VSS algorithms are proposed and their properties are analyzed. The second part focuses on the use of observers to solve the estimation and output-feedback control problems. The third part discusses the discretization aspects of SMC algorithms. Parts IV and V provide important insights on the use of adaptation laws for non-overestimated control gains and chattering alleviation. The last part examines the applications of these SMC/VSS ideas to real-world systems. Sliding-Mode Control and Variable-Structure Systems introduces postgraduates and researchers to the state of the art in the field. It includes theory, methods, and applications relevant to workers in disciplines including control, automation, applied mathematics, electrical and mechanical engineering, instrumentation, electronics, computer science, robotics, transportation, and power engineering. Its clear style and deep exposition help readers to keep in touch with tools that are, thanks to the robustness and insensitivity to perturbations of the SMC/VSS paradigm, among the most efficient for dealing with uncertain systems.

Download or read book Proceedings of International Conference on Industrial Instrumentation and Control written by Subhasis Bhaumik and published by Springer Nature. This book was released on 2022-02-15 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of selected high-quality research papers presented at the International Conference on Industrial Instrumentation and Control (ICI2C 2021), organized by the Department of Applied Electronics & Instrumentation Engineering, RCC Institute of Information Technology, Kolkata, India, during 20–August 22, 2021. It includes novel and innovative work from experts, practitioners, scientists and decision-makers from academia and industry. It covers topics such as instrumentation application in industry, instrumentation in electrical applications and instrumentation in recent trends with computation approach.

Download or read book Advanced Topics on Computer Vision Control and Robotics in Mechatronics written by Osslan Osiris Vergara Villegas and published by Springer. This book was released on 2018-04-28 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of mechatronics (which is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes) is gaining much attention in industries and academics. It was detected that the topics of computer vision, control and robotics are imperative for the successful of mechatronics systems. This book includes several chapters which report successful study cases about computer vision, control and robotics. The readers will have the latest information related to mechatronics, that contains the details of implementation, and the description of the test scenarios.

Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.

Download or read book Control and Mechatronics written by Bodgan Wilamowski and published by CRC Press. This book was released on 2018-10-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition combines traditional and newer, more specialized knowledge that will help industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Control and Mechatronics presents concepts of control theory in a way that makes them easily understandable and practically useful for engineers or students working with control system applications. Focusing more on practical applications than on mathematics, this book avoids typical theorems and proofs and instead uses plain language and useful examples to: Concentrate on control system analysis and design, comparing various techniques Cover estimation, observation, and identification of the objects to be controlled—to ensure accurate system models before production Explore the various aspects of robotics and mechatronics Other volumes in the set: Fundamentals of Industrial Electronics Power Electronics and Motor Drives Industrial Communication Systems Intelligent Systems

Download or read book Design of an Intelligent Embedded System for Condition Monitoring of an Industrial Robot written by Alaa Abdulhady Jaber and published by Springer. This book was released on 2016-09-08 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis introduces a successfully designed and commissioned intelligent health monitoring system, specifically for use on any industrial robot, which is able to predict the onset of faults in the joints of the geared transmissions. However the developed embedded wireless condition monitoring system leads itself very well for applications on any power transmission equipment in which the loads and speeds are not constant, and access is restricted. As such this provides significant scope for future development. Three significant achievements are presented in this thesis. First, the development of a condition monitoring algorithm based on vibration analysis of an industrial robot for fault detection and diagnosis. The combined use of a statistical control chart with time-domain signal analysis for detecting a fault via an arm-mounted wireless processor system represents the first stage of fault detection. Second, the design and development of a sophisticated embedded microprocessor base station for online implementation of the intelligent condition monitoring algorithm, and third, the implementation of a discrete wavelet transform, using an artificial neural network, with statistical feature extraction for robot fault diagnosis in which the vibration signals are first decomposed into eight levels of wavelet coefficients.

Download or read book Neuromorphic and Brain Based Robots written by Jeffrey L. Krichmar and published by Cambridge University Press. This book was released on 2011-09-01 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neuromorphic and brain-based robotics have enormous potential for furthering our understanding of the brain. By embodying models of the brain on robotic platforms, researchers can investigate the roots of biological intelligence and work towards the development of truly intelligent machines. This book provides a broad introduction to this groundbreaking area for researchers from a wide range of fields, from engineering to neuroscience. Case studies explore how robots are being used in current research, including a whisker system that allows a robot to sense its environment and neurally inspired navigation systems that show impressive mapping results. Looking to the future, several chapters consider the development of cognitive, or even conscious robots that display the adaptability and intelligence of biological organisms. Finally, the ethical implications of intelligent robots are explored, from morality and Asimov's three laws to the question of whether robots have rights.

Download or read book Functional and Constraint Logic Programming written by Julio Marino and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains a selection of the papers presented at the 19th International Workshop on Functional and Constraint Logic Programming, WFLP 2010, held in Madrid, Spain, in January 2010, as part of the ACM-SIGPLAN Principles of Programming Languages event, POPL 2010. From the 15 papers submitted, 12 were accepted for presentation at the workshop. The 8 regular papers presented in this volume were selected following a second round of reviewing, which took place after the event. They are complemented by a full-length invited talk by the workshop’s guest speaker, Mariangiola Dezani-Ciancaglini. All current issues in the areas of functional and constraint logic programming are covered including foundational aspects, language design, implementation, transformation and analysis, software engineering, integration of paradigms, and applications.

Download or read book Emerging Trends in Sliding Mode Control written by Axaykumar Mehta and published by Springer Nature. This book was released on 2020-12-21 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles recent developments on sliding mode control theory and its applications. Each chapter presented in the book proposes new dimension in the sliding mode control theory such as higher order sliding mode control, event triggered sliding mode control, networked control, higher order discrete-time sliding mode control and sliding mode control for multi-agent systems. Special emphasis has been given to practical solutions to design involving new types of sliding mode control. This book is a reference guide for graduate students and researchers working in the domain for designing sliding mode controllers. The book is also useful to professional engineers working in the field to design robust controllers for various applications.

Download or read book Advances in Mechanical Systems Dynamics written by Alberto Doria and published by MDPI. This book was released on 2020-02-13 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern dynamics was established many centuries ago by Galileo and Newton before the beginning of the industrial era. Presently, we are in the presence of the fourth industrial revolution, and mechanical systems are increasingly being integrated with electronic, electrical, and fluidic systems. This trend is present not only in the industrial environment, which will soon be characterized by the cyber-physical systems of industry 4.0, but also in other environments like mobility, health and bio-engineering, food and natural resources, safety, and sustainable living. In this context, purely mechanical systems with quasi-static behavior will become less common and the state-of-the-art will soon be represented by integrated mechanical systems, which need accurate dynamic models to predict their behavior. Therefore, mechanical system dynamics are going to play an increasingly central role. Significant research efforts are needed to improve the identification of the mechanical properties of systems in order to develop models that take non-linearity into account, and to develop efficient simulation tools. This Special Issue aims at disseminating the latest research achievements, findings, and ideas in mechanical systems dynamics, with particular emphasis on applications that are strongly integrated with other systems and require a multi-physical approach.

Download or read book Intelligent Computing Methodologies written by De-Shuang Huang and published by Springer Nature. This book was released on 2022-08-15 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set of LNCS 13393 and LNCS 13394 constitutes - in conjunction with the volume LNAI 13395 - the refereed proceedings of the 18th International Conference on Intelligent Computing, ICIC 2022, held in Xi'an, China, in August 2022. The 209 full papers of the three proceedings volumes were carefully reviewed and selected from 449 submissions. This year, the conference concentrated mainly on the theories and methodologies as well as the emerging applications of intelligent computing. Its aim was to unify the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in advanced computational intelligence and bridges theoretical research with applications. Therefore, the theme for this conference was “Advanced Intelligent Computing Technology and Applications”. Papers focused on this theme were solicited, addressing theories, methodologies, and applications in science and technology.

Download or read book Attractive Ellipsoids in Robust Control written by Alexander Poznyak and published by Springer. This book was released on 2014-09-29 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph introduces a newly developed robust-control design technique for a wide class of continuous-time dynamical systems called the “attractive ellipsoid method.” Along with a coherent introduction to the proposed control design and related topics, the monograph studies nonlinear affine control systems in the presence of uncertainty and presents a constructive and easily implementable control strategy that guarantees certain stability properties. The authors discuss linear-style feedback control synthesis in the context of the above-mentioned systems. The development and physical implementation of high-performance robust-feedback controllers that work in the absence of complete information is addressed, with numerous examples to illustrate how to apply the attractive ellipsoid method to mechanical and electromechanical systems. While theorems are proved systematically, the emphasis is on understanding and applying the theory to real-world situations. Attractive Ellipsoids in Robust Control will appeal to undergraduate and graduate students with a background in modern systems theory as well as researchers in the fields of control engineering and applied mathematics.

Download or read book Electrical Engineering And Automation Proceedings Of The International Conference On Electrical Engineering And Automation Eea2016 written by Xiaoxing Zhang and published by World Scientific. This book was released on 2017-04-12 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2016 International Conference on Electrical Engineering and Automation (EEA2016) was held in Hong Kong, China from June 24th-26th, 2016. EEA2016 has provided a platform for leading academic scientists, researchers, scholars and students around the world, to get together to compare notes, and share their results and findings, in areas of Electronics Engineering and Electrical Engineering, Materials and Mechanical Engineering, Control and Automation Modeling and Simulation, Testing and Imaging, Robotics, Actuating and Sensoring.The conference had received a total of 445 submissions. However, after peer review by the Technical Program Committee only 129 were selected to be included in this conference proceedings; based on their originality, ability to test ideas, and contribution to the understanding and advancement in Electronics and Electrical Engineering.

Download or read book Proceedings of the 10th National Technical Seminar on Underwater System Technology 2018 written by Zainah Md Zain and published by Springer. This book was released on 2019-02-08 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents cutting-edge research papers in the field of Underwater System Technology in Malaysia and Asia in general. The topics covered include intelligent robotics, novel sensor technologies, control algorithms, acoustic signal processing, imaging techniques, biomimetic robots, green energy sources, and underwater communication backbones and protocols. The book showcases some of the latest technologies and applications developed to facilitate local marine exploration and exploitation. It also addresses related topics concerning the Sustainable Development Goals (SDG) outlined by the United Nations.