Download or read book Proceedings of the 26th International Symposium on Advancement of Construction Management and Real Estate written by Hongling Guo and published by Springer Nature. This book was released on 2022-09-01 with total page 1687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book of CRIOCM 2021 (26th International Conference on Advancement of Construction Management and Real Estate) presents the latest developments in real estate and construction management around the globe. The conference was organized by the Chinese Research Institute of Construction Management (CRIOCM) working in close collaboration with Tsinghua University. Written by international academics and professionals, the book discusses the latest achievements, research findings and advances in frontier disciplines in the field of construction management and real estate. Covering a wide range of topics, including building information modeling, big data, geographic information systems, housing policies, management of infrastructure projects, intelligent construction and smart city, real estate finance and economics and urban planning and sustainability, the discussions provide valuable insights into the implementation of advanced construction project management and real estate market in China and abroad. The book offers an outstanding resource for academics and professionals.

Download or read book Computational Science and Its Applications ICCSA 2018 written by Osvaldo Gervasi and published by Springer. This book was released on 2018-07-03 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five volume set LNCS 10960 until 10964 constitutes the refereed proceedings of the 18th International Conference on Computational Science and Its Applications, ICCSA 2018, held in Melbourne, Australia, in July 2018. Apart from the general tracks, ICCSA 2018 also includes 34 international workshops in various areas of computational sciences, ranging from computational science technologies, to specific areas of computational sciences, such as computer graphics and virtual reality. The total of 265 full papers and 10 short papers presented in the 5-volume proceedings set of ICCSA 2018, were carefully reviewed and selected from 892 submissions.

Download or read book Proceedings 32 Workshop Computational Intelligence Berlin 1 2 Dezember 2022 written by Schulte, Horst and published by KIT Scientific Publishing. This book was released on 2022-11-20 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieser Tagungsband enthält die Beiträge des 32. Workshops „Computational Intelligence“ des Fachausschusses 5.14 der VDI/VDE-Gesellschaft für Mess- und Automatisierungstechnik (GMA) der vom 1.12. – 2.12.2022 in Berlin stattfand. Die Schwerpunkte sind Methoden, Anwendungen und Tools für - Fuzzy-Systeme - Deep Learning - Machine Learning sowie der Methodenvergleich anhand von industriellen und Benchmark-Problemen. - This conference volume contains the contributions of the 32nd workshop "Computational Intelligence" of the technical committee 5.14 of the VDI/VDE-Gesellschaft für Mess- und Automatisierungstechnik (GMA) which took place from 1.12. - 2.12.2022 in Berlin. The focus will be on methods, applications, and tools for - Fuzzy systems - Deep Learning - Machine Learning - Data Mining as well as method comparison based on industrial and benchmark problems.

Download or read book PROCEEDINGS OF THE 23RD CONFERENCE ON FORMAL METHODS IN COMPUTER AIDED DESIGN FMCAD 2023 written by Alexander Nadel and published by TU Wien Academic Press. This book was released on 2023-10-13 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Conference on Formal Methods in Computer-Aided Design (FMCAD) is an annual conference on the theory and applications of formal methods in hardware and system in academia and industry for presenting and discussing groundbreaking methods, technologies, theoretical results, and tools for reasoning formally about computing systems. FMCAD covers formal aspects of computer-aided system testing.

Download or read book Advanced Control Methods in Marine Robotics Applications written by Fabio Bonsignorio and published by Frontiers Media SA. This book was released on 2021-06-09 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced and Optimization Based Sliding Mode Control Theory and Applications written by Antonella Ferrara and published by SIAM. This book was released on 2019-07-01 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compendium of the authors’ recently published results, this book discusses sliding mode control of uncertain nonlinear systems, with a particular emphasis on advanced and optimization based algorithms. The authors survey classical sliding mode control theory and introduce four new methods of advanced sliding mode control. They analyze classical theory and advanced algorithms, with numerical results complementing the theoretical treatment. Case studies examine applications of the algorithms to complex robotics and power grid problems. Advanced and Optimization Based Sliding Mode Control: Theory and Applications is the first book to systematize the theory of optimization based higher order sliding mode control and illustrate advanced algorithms and their applications to real problems. It presents systematic treatment of event-triggered and model based event-triggered sliding mode control schemes, including schemes in combination with model predictive control, and presents adaptive algorithms as well as algorithms capable of dealing with state and input constraints. Additionally, the book includes simulations and experimental results obtained by applying the presented control strategies to real complex systems. This book is suitable for students and researchers interested in control theory. It will also be attractive to practitioners interested in implementing the illustrated strategies. It is accessible to anyone with a basic knowledge of control engineering, process physics, and applied mathematics.

Download or read book Modeling Design and Simulation of Systems written by Mohamed Sultan Mohamed Ali and published by Springer. This book was released on 2017-08-24 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set CCIS 751 and CCIS 752 constitutes the proceedings of the 17th Asia Simulation Conference, AsiaSim 2017, held in Malacca, Malaysia, in August/September 2017. The 124 revised full papers presented in this two-volume set were carefully reviewed and selected from 267 submissions. The papers contained in these proceedings address challenging issues in modeling and simulation in various fields such as embedded systems; symbiotic simulation; agent-based simulation; parallel and distributed simulation; high performance computing; biomedical engineering; big data; energy, society and economics; medical processes; simulation language and software; visualization; virtual reality; modeling and Simulation for IoT; machine learning; as well as the fundamentals and applications of computing.

Download or read book Advances in Intelligent Control Systems and Computer Science written by Loan Dumitrache and published by Springer Science & Business Media. This book was released on 2012-08-22 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conception of real-time control networks taking into account, as an integrating approach, both the specific aspects of information and knowledge processing and the dynamic and energetic particularities of physical processes and of communication networks is representing one of the newest scientific and technological challenges. The new paradigm of Cyber-Physical Systems (CPS) reflects this tendency and will certainly change the evolution of the technology, with major social and economic impact. This book presents significant results in the field of process control and advanced information and knowledge processing, with applications in the fields of robotics, biotechnology, environment, energy, transportation, et al.. It introduces intelligent control concepts and strategies as well as real-time implementation aspects for complex control approaches. One of the sections is dedicated to the complex problem of designing software systems for distributed information processing networks. Problems as complexity and specific instruments for modeling and control are also presented in a group of papers which identifies a large opening towards the new generation of CPS. The book is structured so as to ensure a good equilibrium between conceptual and applicative aspects.

Download or read book Internal Combustion Engines written by Kazimierz Lejda and published by BoD – Books on Demand. This book was released on 2012-11-14 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on internal combustion engines brings out few chapters on the research activities through the wide range of current engine issues. The first section groups combustion-related papers including all research areas from fuel delivery to exhaust emission phenomena. The second one deals with various problems on engine design, modeling, manufacturing, control and testing. Such structure should improve legibility of the book and helps to integrate all singular chapters as a logical whole.

Download or read book Smart Grid written by Hussein T. Mouftah and published by CRC Press. This book was released on 2017-12-19 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Grid: Networking, Data Management, and Business Models delivers a comprehensive overview of smart grid communications, discussing the latest advances in the technology, the related cyber security issues, and the best ways to manage user demand and pricing. Comprised of 16 chapters authored by world-renowned experts, this book: Considers the use of cognitive radio and software-defined networking in the smart grid Explores the space of attacks in the energy management process, the need for a smart grid simulator, and the management issues that arise around smart cities Describes a real-time pricing scheme that aims to reduce the peak-to-average load ratio Explains how to realize low-carbon economies and the green smart grid through the pervasive management of demand Presents cutting-edge research on microgrids, electric vehicles, and energy trading in the smart grid Thus, Smart Grid: Networking, Data Management, and Business Models provides a valuable reference for utility operators, telecom operators, communications engineers, power engineers, electric vehicle original equipment manufacturers (OEMs), electric vehicle service providers, university professors, researchers, and students.

Download or read book Advanced Vehicle Control written by Johannes Edelmann and published by CRC Press. This book was released on 2016-12-19 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The AVEC symposium is a leading international conference in the fields of vehicle dynamics and advanced vehicle control, bringing together scientists and engineers from academia and automotive industry. The first symposium was held in 1992 in Yokohama, Japan. Since then, biennial AVEC symposia have been established internationally and have considerably contributed to the progress of technology in automotive research and development. In 2016 the 13th International Symposium on Advanced Vehicle Control (AVEC’16) was held in Munich, Germany, from 13th to 16th of September 2016. The symposium was hosted by the Munich University of Applied Sciences. AVEC’16 puts a special focus on automatic driving, autonomous driving functions and driver assist systems, integrated control of interacting control systems, controlled suspension systems, active wheel torque distribution, and vehicle state and parameter estimation. 132 papers were presented at the symposium and are published in these proceedings as full paper contributions. The papers review the latest research developments and practical applications in highly relevant areas of vehicle control, and may serve as a reference for researchers and engineers.

Download or read book Robotics Research written by Henrik I. Christensen and published by Springer. This book was released on 2016-08-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 15th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 15th edition took place in Flagstaff, Arizona on December 9 to December 12, 2011. As for the previous symposia, ISRR 2011 followed up on the successful concept of a mixture of invited contributions and open submissions. Therefore approximately half of the 37 contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other half were chosen among the open submissions after peer review. This selection process resulted in a truly excellent technical program which featured some of the very best of robotic research. The program was organized around oral presentation in a single-track format and included for the first time a small number of interactive presentations. The symposium contributions contained in this volume report on a variety of new robotics research results covering a broad spectrum including perception, manipulation, grasping, vehicles and design, navigation, control and integration, estimation and SLAM.

Download or read book An Introduction to Data Driven Control Systems written by Ali Khaki-Sedigh and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Data-Driven Control Systems An introduction to the emerging dominant paradigm in control design Model-based approaches to control systems design have long dominated the control systems design methodologies. However, most models require substantial prior or assumed information regarding the plant’s structure and internal dynamics. The data-driven paradigm in control systems design, which has proliferated rapidly in recent decades, requires only observed input-output data from plants, making it more flexible and broadly applicable. An Introduction to Data-Driven Control Systems provides a foundational overview of data-driven control systems methodologies. It presents key concepts and theories in an accessible way, without the need for the complex mathematics typically associated with technical publications in the field, and raises the important issues involved in applying these approaches. The result is a highly readable introduction to what promises to become the dominant control systems design paradigm. Readers will also find: An overview of philosophical-historical issues accompanying the emergence of data-driven control systems Design analysis of several conventional data-driven control systems design methodologies Algorithms and simulation results, with numerous examples, to facilitate the implementation of methods An Introduction to Data-Driven Control Systems is ideal for students and researchers in control theory or any other research area related to plant design and production.

Download or read book Flight Formation Control written by Josep M. Guerrero and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade the development and control of Unmanned Aerial Vehicles (UAVs) has attracted a lot of interest. Both researchers and companies have a growing interest in improving this type of vehicle given their many civilian and military applications. This book presents the state of the art in the area of UAV Flight Formation. The coordination and robust consensus approaches are presented in detail as well as formation flight control strategies which are validated in experimental platforms. It aims at helping students and academics alike to better understand what coordination and flight formation control can make possible. Several novel methods are presented: - controllability and observability of multi-agent systems; - robust consensus; - flight formation control; - stability of formations over noisy networks; which generate solutions of guaranteed performance for UAV Flight Formation. Contents 1. Introduction, J.A. Guerrero. 2. Theoretical Preliminaries, J.A. Guerrero. 3. Multiagent Coordination Strategies, J.A. Guerrero, R. Lozano, M.W. Spong, N. Chopra. 4. Robust Control Design for Multiagent Systems with Parametric Uncertainty, J.A. Guerrero, G. Romero. 5. On Adaptive and Robust Controlled Synchronization of Networked Robotic Systems on Strongly Connected Graphs, Y.-C. Liu, N. Chopra. 6. Modeling and Control of Mini UAV, G. Flores Colunga, J.A. Guerrero, J. Escareño, R. Lozano. 7. Flight Formation Control Strategies for Mini UAVs, J.A. Guerrero. 8. Formation Based on Potential Functions, L. García, A. Dzul. 9. Quadrotor Vision-Based Control, J.E. Gomez-Balderas, J.A. Guerrero, S. SALAZAR, R. Lozano, P. Castillo. 10. Toward Vision-Based Coordination of Quadrotor Platoons, L.R. García Carrillo, J.A. Guerrero, R. Lozano. 11. Optimal Guidance for Rotorcraft Platoon Formation Flying in Wind Fields, J.A. Guerrero, Y. Bestaoui, R. Lozano. 12. Impact of Wireless Medium Access Protocol on the Quadrotor Formation Control, J.A. Guerrero, Y. Challal, P. Castillo. 13. MAC Protocol for Wireless Communications, A. Mendez, M. Panduro, O. Elizarraras, D. Covarrubias. 14. Optimization of a Scannable Pattern for Bidimensional Antenna Arrays to Provide Maximum Performance, A. Reyna, M.A. Panduro, A. Mendez.

Download or read book PID Control System Design and Automatic Tuning using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2020-04-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.

Download or read book Model Predictive Vibration Control written by Gergely Takács and published by Springer Science & Business Media. This book was released on 2012-03-05 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: Real-time model predictive controller (MPC) implementation in active vibration control (AVC) is often rendered difficult by fast sampling speeds and extensive actuator-deformation asymmetry. If the control of lightly damped mechanical structures is assumed, the region of attraction containing the set of allowable initial conditions requires a large prediction horizon, making the already computationally demanding on-line process even more complex. Model Predictive Vibration Control provides insight into the predictive control of lightly damped vibrating structures by exploring computationally efficient algorithms which are capable of low frequency vibration control with guaranteed stability and constraint feasibility. In addition to a theoretical primer on active vibration damping and model predictive control, Model Predictive Vibration Control provides a guide through the necessary steps in understanding the founding ideas of predictive control applied in AVC such as: · the implementation of computationally efficient algorithms · control strategies in simulation and experiment and · typical hardware requirements for piezoceramics actuated smart structures. The use of a simple laboratory model and inclusion of over 170 illustrations provides readers with clear and methodical explanations, making Model Predictive Vibration Control the ideal support material for graduates, researchers and industrial practitioners with an interest in efficient predictive control to be utilized in active vibration attenuation.

Download or read book Artificial Intelligence Concepts Methodologies Tools and Applications written by Management Association, Information Resources and published by IGI Global. This book was released on 2016-12-12 with total page 3095 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing advancements in modern technology have led to significant developments in artificial intelligence. With the numerous applications available, it becomes imperative to conduct research and make further progress in this field. Artificial Intelligence: Concepts, Methodologies, Tools, and Applications provides a comprehensive overview of the latest breakthroughs and recent progress in artificial intelligence. Highlighting relevant technologies, uses, and techniques across various industries and settings, this publication is a pivotal reference source for researchers, professionals, academics, upper-level students, and practitioners interested in emerging perspectives in the field of artificial intelligence.