Download or read book Proceedings of the 5th International Conference on Electrical Engineering and Control Applications Volume 2 written by Salim Ziani and published by Springer Nature. This book was released on with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of The 6th International Conference on Clean Energy and Electrical Systems written by Hossam Gaber and published by Springer Nature. This book was released on with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.

Download or read book The IGBT Device written by B. Jayant Baliga and published by Elsevier. This book was released on 2022-11-25 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IGBT Device: Physics, Design and Applications of the Insulated Gate Bipolar Transistor, Second Edition provides the essential information needed by applications engineers to design new products using the device in sectors including consumer, industrial, lighting, transportation, medical and renewable energy. The IGBT device has proven to be a highly important Power Semiconductor, providing the basis for adjustable speed motor drives (used in air conditioning and refrigeration and railway locomotives), electronic ignition systems for gasoline powered motor vehicles and energy-saving compact fluorescent light bulbs. The book presents recent applications in plasma displays (flat-screen TVs) and electric power transmission systems, alternative energy systems and energy storage, but it is also used in all renewable energy generation systems, including solar and wind power. This book is the first available on the applications of the IGBT. It will unlock IGBT for a new generation of engineering applications, making it essential reading for a wide audience of electrical and design engineers, as well as an important publication for semiconductor specialists. - Presents essential design information for applications engineers utilizing IGBTs in the consumer, industrial, lighting, transportation, medical and renewable energy sectors - Teaches the methodology for the design of IGBT chips, including edge terminations, cell topologies, gate layouts, and integrated current sensors - Covers applications of the IGBT, a device manufactured around the world by more than a dozen companies with sales exceeding $5 Billion - Written by the inventor of the device, this is the first book to highlight the key role of the IGBT in enabling electric vehicles and renewable energy systems with global impacts on climate change

Download or read book Maritime Technology and Engineering III written by Carlos Guedes Soares and published by CRC Press. This book was released on 2016-12-01 with total page 2358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship Structures, Ship Design, Ship Machinery, Shipyard Technology, afety & Reliability, Fisheries, Oil & Gas, Marine Environment, Renewable Energy and Coastal Structures. Maritime Technology and Engineering 3 will appeal to academics, engineers and professionals interested or involved in these fields.

Download or read book High Voltage Measurement Techniques written by Klaus Schon and published by Springer. This book was released on 2019-07-04 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book conveys the theoretical and experimental basics of a well-founded measurement technique in the areas of high DC, AC and surge voltages as well as the corresponding high currents. Additional chapters explain the acquisition of partial discharges and the electrical measured variables. Equipment exposed to very high voltages and currents is used for the transmission and distribution of electrical energy. They are therefore tested for reliability before commissioning using standardized and future test and measurement procedures. Therefore, the book also covers procedures for calibrating measurement systems and determining measurement uncertainties, and the current state of measurement technology with electro-optical and magneto-optical sensors is discussed.

Download or read book Short Circuits in AC and DC Systems written by J. C. Das and published by CRC Press. This book was released on 2017-10-24 with total page 829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an understanding of the nature of short-circuit currents, current interruption theories, circuit breaker types, calculations according to ANSI/IEEE and IEC standards, theoretical and practical basis of short-circuit current sources, and the rating structure of switching devices. The book aims to explain the nature of short-circuit currents, the symmetrical components for unsymmetrical faults, and matrix methods of solutions, which are invariably used on digital computers. It includes innovations, worked examples, case studies, and solved problems.

Download or read book Crises in Oil Gas and Petrochemical Industries written by Mohammad Reza Rahimpour and published by Elsevier. This book was released on 2023-07-13 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Crises in Oil, Gas and Petrochemical Industries: Loss Prevention and Disaster Management, Volume Two provides an overview of both natural and manmade disasters occurring in oil, gas and petrochemical industries and prepares special solutions based on their types. The book focuses on loss prevention and disaster management in petrochemical industries from different points-of-view. Sections review methods for making the apparatus safer and continue with discussions on the process of facing and managing disasters during the occurrence. Final sections cover loss and economic analysis after disasters and methods of reversibility are presented with case studies from around the world. - Introduces pre-disaster strategies in oil, gas and petrochemical industries - Describes during-disaster strategies in oil, gas and petrochemical industries - Discusses post-disaster management methods in oil, gas and petrochemical industries

Download or read book Critical Information Infrastructures Security written by Erich Rome and published by Springer Science & Business Media. This book was released on 2010-07-12 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 4th International Workshop on Critical Information Infrastructures Security, CRITIS 2009, held in Bonn, Germany, during September 30 to October 2, 2009.

Download or read book ARC Flash Hazard Analysis and Mitigation written by J. C. Das and published by John Wiley & Sons. This book was released on 2012-08-15 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date analysis methodologies and practical mitigation for a major electrical safety concern Arc Flash Hazard Analysis and Mitigation is the first book to focus specifically on arc flash hazards and provide the latest methodologies for its analysis as well as practical mitigation techniques. Consisting of sixteen chapters, this fully up-to-date handbook covers all aspects of arc flash hazard calculations and mitigation. It addresses the calculations of short circuits, protective relaying, and varied electrical systems configurations in electrical power systems. It also examines protection systems, including differential relays, arc flash sensing relays, protective relaying coordination, current transformer operation and saturation, and applications to major electrical equipment from the arc flash point of view. Current technologies and strategies for arc flash mitigation are explored. Using the methodology, analysis, and preventive measures discussed in the book, the arc flash hazard incident energy can be reduced to 8 cal/cm2 or less for the new and existing electrical distribution systems. This powerful resource: Features the most up-to-date arc flash analysis methodologies Presents arc flash hazard calculations in dc systems Supplies practical examples and case studies Provides end-of-chapter reviews and questions Includes a Foreword written by Lanny Floyd, a world-renowned leader in electrical safety who is DuPont's Principal Consultant on Electrical Safety and Technology Arc Flash Hazard Analysis and Mitigation is a must-have guide for electrical engineers engaged in design, operation, and maintenance, consulting engineers, facility managers, and safety professionals.

Download or read book IEEE Conference Record of Industrial and Commercial Power Systems Technical Conference written by and published by . This book was released on 2005 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Detection of Corona Discharge in Electric Networks written by Yevgen Sokol and published by Springer Nature. This book was released on 2023-11-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to the solution of the problem of determining the presence of corona discharge on electrical equipment with acoustic radiation. It is shown that corona discharge leads not only to irreversible losses of electrical energy, but also interferes with the transmission of high-frequency signals, deteriorates insulating elements, can become a source of conditions for the occurrence of a destructive arc discharge and is one of the factors of changing the continuity of the electrical system as a whole. The book describes the processes in a corona discharge that lead to the occurrence of acoustic waves. The authors analyzed acoustic radiation from a corona discharge reproduced in laboratory conditions. The received acoustic signals were processed by Fourier transform. Thus, the features of the spectral function, which belong specifically to the corona discharge in electrical networks with industrial frequency current, were determined. Based on the inverse Fourier transform, a simplified model of the acoustic radiation of the corona discharge was constructed. The authors proposed a method for detecting the presence of a corona discharge based on the spectral characteristics of acoustic radiation. Techniques were developed to determine the presence of a corona discharge for the creation of stationary and mobile devices. The advantages of the method of detecting the presence of corona discharge by the acoustic spectrum are shown. The method makes it possible to determine the presence of a corona discharge remotely, even out of direct sight, regardless of the time of day and regardless of the season. The book states that determining the presence of a corona discharge is not enough, it is still necessary to determine its location. The method of finding the coordinates of the corona discharge as a source of sound was described. Methods of searching for corona discharge coordinates with a fixed scanning device and a moving scanning device are proposed. A UAV is proposed as a mobile platform for the scanning system. The influence of the Doppler effect on acoustic measurements when the UAV speed changes was taken into account. The authors have shown that the use of coronal discharge detection with UAVs will not only enable the prevention of coronal discharge, but also increase the frequency of surface inspections. This will allow timely measures to be taken to improve the reliability of the power system operation. The book is intended for the researchers, postgraduate students and students specialized in theory and calculations of electrical systems.

Download or read book Model Predictive Control of High Power Converters and Industrial Drives written by Tobias Geyer and published by John Wiley & Sons. This book was released on 2016-09-12 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this original book on model predictive control (MPC) for power electronics, the focus is put on high-power applications with multilevel converters operating at switching frequencies well below 1 kHz, such as medium-voltage drives and modular multi-level converters. Consisting of two main parts, the first offers a detailed review of three-phase power electronics, electrical machines, carrier-based pulse width modulation, optimized pulse patterns, state-of-the art converter control methods and the principle of MPC. The second part is an in-depth treatment of MPC methods that fully exploit the performance potential of high-power converters. These control methods combine the fast control responses of deadbeat control with the optimal steady-state performance of optimized pulse patterns by resolving the antagonism between the two. MPC is expected to evolve into the control method of choice for power electronic systems operating at low pulse numbers with multiple coupled variables and tight operating constraints it. Model Predictive Control of High Power Converters and Industrial Drives will enable to reader to learn how to increase the power capability of the converter, lower the current distortions, reduce the filter size, achieve very fast transient responses and ensure the reliable operation within safe operating area constraints. Targeted at power electronic practitioners working on control-related aspects as well as control engineers, the material is intuitively accessible, and the mathematical formulations are augmented by illustrations, simple examples and a book companion website featuring animations. Readers benefit from a concise and comprehensive treatment of MPC for industrial power electronics, enabling them to understand, implement and advance the field of high-performance MPC schemes.

Download or read book Big Data Analytics in Future Power Systems written by Ahmed F. Zobaa and published by CRC Press. This book was released on 2018-08-14 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power systems are increasingly collecting large amounts of data due to the expansion of the Internet of Things into power grids. In a smart grids scenario, a huge number of intelligent devices will be connected with almost no human intervention characterizing a machine-to-machine scenario, which is one of the pillars of the Internet of Things. The book characterizes and evaluates how the emerging growth of data in communications networks applied to smart grids will impact the grid efficiency and reliability. Additionally, this book discusses the various security concerns that become manifest with Big Data and expanded communications in power grids. Provide a general description and definition of big data, which has been gaining significant attention in the research community. Introduces a comprehensive overview of big data optimization methods in power system. Reviews the communication devices used in critical infrastructure, especially power systems; security methods available to vet the identity of devices; and general security threats in CI networks. Presents applications in power systems, such as power flow and protection. Reviews electricity theft concerns and the wide variety of data-driven techniques and applications developed for electricity theft detection.

Download or read book Power and Energy written by Richard Kong and published by CRC Press. This book was released on 2015-05-06 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power and Energy contains 86 selected papers from the International Conference on Power and Energy (CPE 2014, Shanghai, China, 29-30 November 2014), and presents a wide range of topics:- Energy management, planning and policy-making- Energy technologies and environment- Energy prospects- Conventional and renewable power generation- Power system man

Download or read book Wireless Communication in Underground Mines written by L. K. Bandyopadhyay and published by Springer Science & Business Media. This book was released on 2009-08-29 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communication has emerged as an independent discipline in the past decades. Everything from cellular voice telephony to wireless data transmission using wireless sensor networks has profoundly impacted the safety, production, and productivity of industries and our lifestyle as well. After a decade of exponential growth, the wireless industry is one of the largest industries in the world. Therefore, it would be an injustice if the wireless communication is not explored for mining industry. Underground mines, which are characterized by their tough working conditions and hazardous environments, require fool-proof mine-wide communication systems for smooth functioning of mine workings and ensuring better safety. Proper and re- able communication systems not only save the machine breakdown time but also help in immediate passing of messages from the vicinity of underground working area to the surface for day-to-day normal mining operations as well as for speedy rescue operations in case of disaster. Therefore, a reliable and effective commu- cation system is an essential requisite for safe working, and maintaining requisite production and productivity of underground mines. Most of the existing systems generally available in underground mines are based on line (wired) communication principle, hence these are unable to withstand in the disaster conditions and dif?cult to deploy in inaccessible places. Therefore, wireless communication is an indispe- able, reliable, and convenient system and essential in case of day-to-day normal duty or disaster situations.

Download or read book 2005 IEEE International Conference on Service Operations and Logistics and Informatics written by Robin G. Qiu and published by . This book was released on 2005 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: