Download or read book Electroceramic Based MEMS written by Nava Setter and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics: Part A: Applications and devices with electroceramic-based MEMS: Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devices MEMS for optical functionality Part B: Materials, fabrication technology, and functionality: Ceramic thick films for MEMS Piezoelectric thin films for MEMS Materials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramics Soft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field. The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.

Download or read book Ultrasonics written by Dale Ensminger and published by CRC Press. This book was released on 2024-02-21 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated, revised, and restructured to reflect the latest advances in science and applications, the fourth edition of this best-selling industry and research reference covers the fundamental physical acoustics of ultrasonics and transducers, with a focus on piezoelectric and magnetostrictive modalities. It then discusses the full breadth of ultrasonics applications involving low power (sensing) and high power (processing) for research, industrial, and medical use. This book includes new content covering computer modeling used for acoustic and elastic wave phenomena, including scattering, mode conversion, transmission through layered media, Rayleigh and Lamb waves and flexural plates, modern horn design tools, Langevin transducers, and material characterization. There is more attention on process monitoring and advanced nondestructive testing and evaluation (NDT/NDE), including phased array ultrasound (PAUT), long-range inspection, using guided ultrasonic waves (GUW), internally rotary inspection systems (IRIS), time-of-flight diffraction (TOFD), and acoustic emission (AE). These methods are discussed and applied to both metals and nonmetals using illustrations in various industries, including now additionally for food and beverage products. The topics of defect sizing, capabilities, and limitations, including the probability of detection (POD), are introduced. Three chapters provide a new treatment of high-power ultrasonics, for both fluids and solids, and again, with examples of industrial engineering, food and beverage, pharmaceuticals, petrochemicals, and other process applications. Expanded coverage is given to medical and biological applications, covering diagnostics, therapy, and, at the highest powers, surgery. Key Features Provides an overview of fundamental analysis and transducer technologies needed to design and develop both measurement and processing systems Considers applications in material characterization and metrology Covers ultrasonic nondestructive testing and evaluation and high-power ultrasonics, which involves interactions that change the state of material Highlights medical and biomedical applications of ultrasound, focusing on the physical acoustics and the technology employed for diagnosis, therapy, surgery, and research This book is intended for both the undergraduate and graduate scientists and engineers, as well as the working professional, who seeks to understand the fundamentals together with a holistic treatment of the field of ultrasonics and its diversity of applications.

Download or read book Medical Imaging written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2009-03-23 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must-read for anyone working in electronics in the healthcare sector This one-of-a-kind book addresses state-of-the-art integrated circuit design in the context of medical imaging of the human body. It explores new opportunities in ultrasound, computed tomography (CT), magnetic resonance imaging (MRI), nuclear medicine (PET, SPECT), emerging detector technologies, circuit design techniques, new materials, and innovative system approaches. Divided into four clear parts and with contributions from a panel of international experts, Medical Imaging systematically covers: X-ray imaging and computed tomography–X-ray and CT imaging principles; Active Matrix Flat Panel Imagers (AMFPI) for diagnostic medical imaging applications; photon counting and integrating readout circuits; noise coupling in digital X-ray imaging Nuclear medicine–SPECT and PET imaging principles; low-noise electronics for radiation sensors Ultrasound imaging–Electronics for diagnostic ultrasonic imaging Magnetic resonance imaging–Magnetic resonance imaging principles; MRI technology

Download or read book Fundamentals of Ultrasonic Testing written by Chunguang Xu and published by CRC Press. This book was released on 2024-08-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the theory and state-of-the-art technologies of ultrasonic testing (UT), this book examines ultrasonic propagation in solids and its detection applications, and explores the intersection of UT technology with various fields of electromagnetics, optics and physics. UT is one of the most widely used nondestructive testing techniques due to its high performance in terms of detection efficiency and safety. The rapid development of modern industrial products and technologies has created a new challenge and demand for ultrasonic nondestructive testing technology. This book introduces the fundamentals of UT, including sound wave and sound field, interface wave theory and liquid-solid coupled sound field. It then discusses various types of UT methods, ranging from the critically refracted longitudinal wave method to ultrasonic surface wave and ultrasonic guided wave detection methods. Some newly developed UT techniques are also discussed, including phased-array UT, high-frequency UT and non-contact UT. This title will appeal to engineering students and technicians in the field of ultrasonic nondestructive testing.

Download or read book Ultrasound in Food Processing written by Mar Villamiel and published by John Wiley & Sons. This book was released on 2017-04-25 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: Fundamentals of ultrasound This part will cover the main basic principles of ultrasound generation and propagation and those phenomena related to low and high intensity ultrasound applications. The mechanisms involved in food analysis and process monitoring and in food process intensification will be shown. Part II: Low intensity ultrasound applications Low intensity ultrasound applications have been used for non-destructive food analysis as well as for process monitoring. Ultrasonic techniques, based on velocity, attenuation or frequency spectrum analysis, may be considered as rapid, simple, portable and suitable for on-line measurements. Although industrial applications of low-intensity ultrasound, such as meat carcass evaluation, have been used in the food industry for decades, this section will cover the most novel applications, which could be considered as highly relevant for future application in the food industry. Chapters addressing this issue will be divided into three subsections: (1) food control, (2) process monitoring, (3) new trends. Part III: High intensity ultrasound applications High intensity ultrasound application constitutes a way to intensify many food processes. However, the efficient generation and application of ultrasound is essential to achieving a successful effect. This part of the book will begin with a chapter dealing with the importance of the design of efficient ultrasonic application systems. The medium is essential to achieve efficient transmission, and for that reason the particular challenges of applying ultrasound in different media will be addressed. The next part of this section constitutes an up-to-date vision of the use of high intensity ultrasound in food processes. The chapters will be divided into four sections, according to the medium in which the ultrasound vibration is transmitted from the transducers to the product being treated. Thus, solid, liquid, supercritical and gas media have been used for ultrasound propagation. Previous books addressing ultrasonic applications in food processing have been based on the process itself, so chapters have been divided in mass and heat transport, microbial inactivation, etc. This new book will propose a revolutionary overview of ultrasonic applications based on (in the authors’ opinion) the most relevant factor affecting the efficiency of ultrasound applications: the medium in which ultrasound is propagated. Depending on the medium, ultrasonic phenomena can be completely different, but it also affects the complexity of the ultrasonic generation, propagation and application. In addition, the effect of high intensity ultrasound on major components of food, such as proteins, carbohydrates and lipids will be also covered, since this type of information has not been deeply studied in previous books. Other aspects related to the challenges of food industry to incorporate ultrasound devices will be also considered. This point is also very important since, in the last few years, researchers have made huge efforts to integrate fully automated and efficient ultrasound systems to the food production lines but, in some cases, it was not satisfactory. In this sense, it is necessary to identify and review the main related problems to efficiently produce and transmit ultrasound, scale-up, reduce cost, save energy and guarantee the production of safe, healthy and high added value foods.

Download or read book Interface Engineering of Capacitive Micromachined Ultrasonic Transducers for Medical Applications written by Der-Song Lin and published by Stanford University. This book was released on 2011 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Capacitive micromachined ultrasonic transducers (CMUTs), have been widely studied in academia and industry over the last decade. CMUTs provide many benefits over traditional piezoelectric transducers including improvement in performance through wide bandwidth, and ease of electronics integration, with the potential to batch fabricate very large 2D arrays with low-cost and high-yield. Though many aspects of CMUT technology have been studied over the years, packaging the CMUT into a fully practical system has not been thoroughly explored. Two important interfaces of packaging that this thesis explores are device encapsulation (the interface between CMUTs and patients) and full electronic integration of large scale 2D arrays (the interface between CMUTs and electronics). In the first part of the work, I investigate the requirements for the CMUT encapsulation. For medical usage, encapsulation is needed to electrically insulate the device, mechanically protect the device, and maintain transducer performance, especially the access of the ultrasound energy. While hermetic sealing can protect many other MEMS devices, CMUTs require mechanical interaction to a fluid, which makes fulfilling the previous criterion very challenging. The proposed solution is to use a viscoelastic material with the glass-transition-temperature lower than room temperature, such as Polydimethylsiloxane (PDMS), to preserve the CMUT static and dynamic performance. Experimental implementation of the encapsulated imaging CMUT arrays shows the device performance was maintained; 95 % of efficiency, 85% of the maximum output pressure, and 91% of the fractional bandwidth (FBW) can be preserved. A viscoelastic finite element model was also developed and shows the performance effects of the coating can be accurately predicted. Four designs, providing acoustic crosstalk suppression, flexible substrate, lens focusing, and blood flow monitoring using PDMS layer were also demonstrated. The second part of the work, presents contributions towards the electronic integration and packaging of large-area 2-D arrays. A very large 2D array is appealing for it can enable advanced novel imaging applications, such as a reconfigurable array, and a compression plate for breast cancer screening. With these goals in mind, I developed the first large-scale fully populated and integrated 2D CMUTs array with 32 by 192 elements. In this study, I demonstrate a flexible and reliable integration approach by successfully combining a simple UBM preparation technique and a CMUTs-interposer-ASICs sandwich design. The results show high shear strength of the UBM (26.5 g), 100% yield of the interconnections, and excellent CMUT resonance uniformity ([lowercase Sigma] = 0.02 MHz). As demonstrated, this allows for a large-scale assembly of a tile-able array by using an interposer. Interface engineering is crucial towards the development of CMUTs into a practical ultrasound system. With the advances in encapsulation technique with a viscoelastic polymer and the combination of the UBM technique to the TSV fabrication for electronics integration, a fully integrated CMUT system can be realized.

Download or read book Advanced Structural Damage Detection written by Tadeusz Stepinski and published by John Wiley & Sons. This book was released on 2013-05-20 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring (SHM) is the interdisciplinary engineering field devoted to the monitoring and assessment of structural health and integrity. SHM technology integrates non-destructive evaluation techniques using remote sensing and smart materials to create smart self-monitoring structures characterized by increased reliability and long life. Its applications are primarily systems with critical demands concerning performance where classical onsite assessment is both difficult and expensive. Advanced Structural Damage Detection: From Theory to Engineering Applications is written by academic experts in the field and provides students, engineers and other technical specialists with a comprehensive review of recent developments in various monitoring techniques and their applications to SHM. Contributing to an area which is the subject of intensive research and development, this book offers both theoretical principles and feasibility studies for a number of SHM techniques. Key features: Takes a multidisciplinary approach and provides a comprehensive review of main SHM techniques Presents real case studies and practical application of techniques for damage detection in different types of structures Presents a number of new/novel data processing algorithms Demonstrates real operating prototypes Advanced Structural Damage Detection: From Theory to Engineering Applications is a comprehensive reference for researchers and engineers and is a useful source of information for graduate students in mechanical and civil engineering

Download or read book Wireless Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.

Download or read book Recent Advances in Biomedical Signal Processing written by Juan Manuel Górriz and published by Bentham Science Publishers. This book was released on 2011 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biomedical signal processing is a rapidly expanding field with a wide range of applications, from the construction of artificial limbs and aids for disabilities to the development of sophisticated medical imaging systems. Acquisition and processing of bio"

Download or read book Multiresonator Based Chipless RFID written by Stevan Preradovic and published by Springer Science & Business Media. This book was released on 2012-01-07 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: This vital new resource offers engineers and researchers a window on important new technology that will supersede the barcode and is destined to change the face of logistics and product data handling. In the last two decades, radio-frequency identification has grown fast, with accelerated take-up of RFID into the mainstream through its adoption by key users such as Wal-Mart, K-Mart and the US Department of Defense. RFID has many potential applications due to its flexibility, capability to operate out of line of sight, and its high data-carrying capacity. Yet despite optimistic projections of a market worth $25 billion by 2018, potential users are concerned about costs and investment returns. Clearly demonstrating the need for a fully printable chipless RFID tag as well as a powerful and efficient reader to assimilate the tag’s data, this book moves on to describe both. Introducing the general concepts in the field including technical data, it then describes how a chipless RFID tag can be made using a planar disc-loaded monopole antenna and an asymmetrical coupled spiral multi-resonator. The tag encodes data via the “spectral signature” technique and is now in its third-generation version with an ultra-wide band (UWB) reader operating at between 5 and 10.7GHz.

Download or read book RF Bulk Acoustic Wave Filters for Communications written by Ken-ya Hashimoto and published by Artech House. This book was released on 2009 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This timely book presents a thorough overview of RF BAW filters, covering a vast range of technologies, optimal device design, filter topologies, packaging, fabrication processes, and high quality piezoelectric thin films. Moreover, the book discusses the integration of BAW filters in RF systems.

Download or read book Biomedical Electronics Noise Shaping ADCs and Frequency References written by Pieter Harpe and published by Springer Nature. This book was released on 2023-06-22 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 30th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, with specific contributions focusing on analog circuits for machine learning, current/voltage/temperature sensors, and high-speed communication via wireless, wireline, or optical links. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.

Download or read book Nanostructure Based Sensors for Gas Sensing from Devices to Systems written by Sabrina Grassini and published by MDPI. This book was released on 2019-10-29 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of solid state gas sensors based on microtransducers and nanostructured sensing materials is the key point in the design of portable measurement systems able to reach sensing and identification performance comparable with analytical ones. In such a context several efforts must be spent of course in the development of the sensing material, but also in the choice of the transducer mechanism and its structure, in the electrical characterization of the performance and in the design of suitable measurement setups. This call for papers invites researchers worldwide to report about their novel results on the most recent advances and overview in design and measurements for applications in gas sensors, along with their relevant features and technological aspects. Original research papers are welcome (but not limited) on all aspects that focus on the most recent advances in: (i) basic principles and modeling of gas and VOCs sensors; (ii) new gas sensor principles and technologies; (iii) Characterization and measurements methodologies; (iv) transduction and sampling systems; (vi) package optimization; (vi) gas sensor based systems and applications.

Download or read book Computational Modeling in Biomechanics written by Suvranu De and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Availability of advanced computational technology has fundamentally altered the investigative paradigm in the field of biomechanics. Armed with sophisticated computational tools, researchers are seeking answers to fundamental questions by exploring complex biomechanical phenomena at the molecular, cellular, tissue and organ levels. The computational armamentarium includes such diverse tools as the ab initio quantum mechanical and molecular dynamics methods at the atomistic scales and the finite element, boundary element, meshfree as well as immersed boundary and lattice-Boltzmann methods at the continuum scales. Multiscale methods that link various scales are also being developed. While most applications require forward analysis, e.g., finding deformations and stresses as a result of loading, others involve determination of constitutive parameters based on tissue imaging and inverse analysis. This book provides a glimpse of the diverse and important roles that modern computational technology is playing in various areas of biomechanics including biofluids and mass transfer, cardiovascular mechanics, musculoskeletal mechanics, soft tissue mechanics, and biomolecular mechanics.

Download or read book Advances in System Integrated Intelligence written by Maurizio Valle and published by Springer Nature. This book was released on 2022-09-03 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on cutting-edge research and developments focusing on integrating intelligent functionalities into materials, components, systems and products. Gathering the proceedings of the 6th International Conference on System-Integrated Intelligence (SysInt 2022), held on September 7-9, in Genova, Italy, it offers a comprehensive, multidisciplinary and applied perspective on the state-of-the art and challenges in the field of intelligent, flexible and connected systems. The book covers advanced methods and applications relating to artificial, pervasive and ubiquitous intelligence, sensors, smart factory and logistics, structural health monitoring, as well as soft robotics, cognitive systems and human-machine interaction. Giving a special focus to artificial intelligence, it extensively reports on methods and algorithms for data-driven modeling, and agent-based data processing and planning. It aims at inspiring and fostering collaboration between researchers and professionals from the different fields of electrical, manufacturing and production engineering, and materials and computer sciences.

Download or read book Interdisciplinary Electromagnetic Mechanic and Biomedical Problems written by and published by IOS Press. This book was released on 2007 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposium on Applied Electromagnetics and Mechanics (ISEM) is an interdisciplinary international forum. This title concerns 12th event and was organized by following three institutions: Vienna Magnetics Group, TU BioMed - Society for Biomedical Engineering, Bioelectricity & Magnetism Lab; and the Vienna University of Technology.