Download or read book 2 d Coherent Power Scaling of Mid infrared Quantum Cascade Lasers written by Christopher Andrew Sigler and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scaling the continuous-wave (CW) power of quantum cascade lasers (QCLs) beyond ~5 W has proven difficult, and beam-quality degradation is common when scaling the device volume for high power. The primary objective of this work was to develop methods for spatially-coherent power scaling of mid-infrared-emitting QCLs to high CW powers. Two approaches were investigated: 1) resonant leaky-wave-coupled antiguided phase-locked laser arrays; and 2) grating-coupled surface-emitting lasers (GCSELs). These two approaches can be combined to realize high surface-emitted powers in a spatially and temporally coherent beam pattern. Optical and thermal models of planarized leaky-wave-coupled phase-locked QCL arrays were coupled together to investigate the influence of thermal lensing on modal behavior. Self-focusing under thermally-induced index variations across the array were found to impact the field profile and promote multi-moding due to gain spatial hole burning. Two techniques were found to mitigate this effect: 1) employing anti-resonant reflective-optical waveguide terminations outside the array; and 2) chirping the element width across the array to obtain identical optically-equivalent widths under CW operation, eliminating thermal lensing at a particular operating condition. Five-element phase-locked arrays of 4.7 μm-emitting QCLs were demonstrated which operate in a near-diffraction-limited beam (primarily in the in-phase array mode) to 5.1 W peak pulsed power, in agreement with simulations. Spectrally resolved near- and far-field measurements indicate that the wide spectral bandwidth of the QCL core promotes multi-mode operation at high drive levels. An optimized array design was identified to allow sole in-phase mode operation to high drive levels above threshold, indicating that full spatial coherence to high output powers does not require full temporal coherence for phase-locked laser arrays. Lastly, a novel method for obtaining a single-lobed beam pattern from transverse magnetic (TM)-polarized GCSELs is proposed: resonant coupling of the optical mode of a QCL to the antisymmetric surface plasmon mode of a 2nd-order distributed feedback metal/semiconductor grating results in strong antisymmetric-mode absorption. Lasing in the symmetric mode, resulting in a single-lobed far-field beam pattern from the substrate emission, is strongly favored around resonance. For infinite-length devices, the symmetric mode has negligible absorption loss while still being efficiently outcoupled by the grating.
Download or read book Mid Infrared and Terahertz Quantum Cascade Lasers written by Dan Botez and published by Cambridge University Press. This book was released on 2023-09-14 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how the rapidly expanding area of mid-infrared and terahertz photonics has been revolutionized in this comprehensive overview. State-of-the-art practical applications are supported by real-life examples and expert guidance. Also featuring fundamental theory enabling you to improve performance of both existing and future devices.
Download or read book Mid Infrared and Terahertz Quantum Cascade Lasers written by Dan Botez and published by Cambridge University Press. This book was released on 2023-06-30 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: A state-of-the-art overview of this rapidly expanding field, featuring fundamental theory, practical applications, and real-life examples.
Download or read book Thermal and Waveguide Optimization of Broad Area Quantum Cascade Laser Performance written by Matthew Michael Suttinger and published by . This book was released on 2017 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum Cascade Lasers are a novel source of coherent infrared light, unique in their tunability over the mid-infrared and terahertz range of frequencies. Advances in bandgap engineering and semiconductor processing techniques in recent years have led to the development of highly efficient quantum cascade lasers capable of room temperature operation. Recent work has demonstrated power scaling with broad area quantum cascade lasers by increasing active region width beyond the standard ~10 [micrometer]. Taking into account thermal effects caused by driving a device with electrical power, an experimentally fitted model is developed to predict the optical power output in both pulsed and continuous operation with varying device geometry and minor changes to quantum cascade laser active region design. The effects of the characteristic temperatures of threshold current density and slope efficiency, active region geometry, and doping, on output power are studied in the model. The model is then used to refine the active region design for increased power out in continuous operation for a broad area design. Upon testing the new design, new thermal effects on rollover current density are observed. The model is then refined to reflect the new findings and more accurately predict output power characteristics.
Download or read book Mid infrared Quantum Cascade Lasers for Chaos Secure Communications written by Olivier Spitz and published by Springer Nature. This book was released on 2021-05-15 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mid-infrared domain is a promising optical domain because it holds two transparency atmospheric windows, as well as the fingerprint of many chemical compounds. Quantum cascade lasers (QCLs) are one of the available sources in this domain and have already been proven useful for spectroscopic applications and free-space communications. This thesis demonstrates how to implement a private free-space communication relying on mid-infrared optical chaos and this requires an accurate cartography of non-linear phenomena in quantum cascade lasers. This private transmission is made possible by the chaos synchronization of two twin QCLs. Chaos in QCLs can be generated under optical injection or external optical feedback. Depending on the parameters of the optical feedback, QCLs can exhibit several non-linear phenomena in addition to chaos. Similarities exist between QCLs and laser diodes when the chaotic dropouts are synchronized with an external modulation, and this effect is known as the entrainment phenomenon. With a cross-polarization reinjection technique, QCLs can generate all-optical square-waves. Eventually, it is possible to trigger optical extreme events in QCLs with tilted optical feedback. All these experimental results allow a better understanding of the non-linear dynamics of QCLs and will extend the potential applications of this kind of semiconductor lasers.
Download or read book Multimode Regimes in Quantum Cascade Lasers From Coherent Instabilities to Spatial Hole Burning written by and published by . This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: A systematic experimental and theoretical study of multimode regimes has been performed in high power mid-infrared quantum cascade lasers (QCLs). In narrow devices it is found that above a second threshold the laser spectrum dramatically broadens showing multimode operation with pronounced Rabi sidebands in the envelope of the spectrum. This represents the first direct evidence of the coherent instability associated with population oscillations at the Rabi frequency. For ridge widths much larger than the wavelength, the Rabi sidebands disappear.
Download or read book Characterization of Mid infrared Quantum Cascade Lasers written by David Patrick Burghoff and published by . This book was released on 2009 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum cascade lasers provide some of the highest output powers available for light in the mid-infrared range (from 3 to 8 m). As many of their applications require portability, designs that have a high wall-plug efficiency are essential, and were designed and grown by others to achieve this goal. However, because a large fraction of these devices did not operate at all, very few of the standard laser measurements could be performed to determine their properties. Therefore, measurements needed to be performed that could non-destructively probe the behavior of QCLs while still providing useful information. This thesis explores these types of measurements, all of which fall into the category of device spectroscopy. Through polarization-dependent transmission and photovoltaic spectroscopy, a large portion of the quantum mechanical bandstructure could be determined, along with many of the parameters characterizing crystal growth quality. In addition, high-resolution transmission spectroscopy was used to find the properties of the QCL waveguide. In order to find the correspondence between theory and experiment, bandstructure simulations were performed using a three-band p model, and two-dimensional electromagnetic simulations were performed to describe the laser's optical properties. These simulations were found to be in relatively good agreement with the device measurements, and any discrepancies were found to be consistent with problems in the growth and fabrication.
Download or read book High Power Continuous Wave Quantum Cascade Lasers with Increased Ridge Width written by Ankesh Mahesh Kumar Todi and published by . This book was released on 2017 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum Cascade Lasers have recently gained considerable attention for their capability to emit infrared radiation in a broad infrared spectral region, very compact dimensions, and high optical power/efficiency. Increasing continuous wave optical power is one of the main research directions in the field. A straightforward approach to increasing optical power in the pulsed regime is to increase number of stages in the cascade structure. However, due to a low active region thermal conductivity, the increase in number of stages leads to active region overheating in continuous wave operation. In this work, an alternative approach to power scaling with device dimensions is explored: number of stages is reduced to reduce active region thermal resistance, while active region lateral size is increased for reaching high optical power level. Using this approach, power scaling for active region width increase from 10[micrometer] to 20[micrometer] is demonstrated for the first time. An analysis based on a simple semi-empirical model suggests that laser power can be significantly improved by increasing characteristic temperature T0 that describes temperature dependence of laser threshold current density.
Download or read book High power and Narrow linewidth Optimizations of Mid infrared Quantum Cascade Lasers written by Ilia Sergachev and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication and Biosystems written by Harvey C. Hoch and published by Cambridge University Press. This book was released on 1996-07-13 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book also aims to stimulate innovative, productive interactions among materials scientists, engineers, and biologists, and to explore ways in which materials scientists and engineers can exploit biological principles and biological assemblies to produce new and ever smaller devices.
Download or read book Mid Infrared Quantum Cascade Lasers written by Alfredo Bismuto and published by LAP Lambert Academic Publishing. This book was released on 2012-02 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the work performed by the author at the ETH Zurich, under the supervision of Prof. Jerome Faist on the optimization of high performance quantum cascade lasers (QCLs) in the Mid-IR spectral region. The main factors influencing laser performance have therefore been analyzed. In particular the optimization of the laser design in order to improve the electron tranport and the optical gain. In addition a detailed analysis of the fabrication process is performed and a novel process scheme is presented for buried heterostructure lasers.
Download or read book Mid infrared Quantum Cascade Lasers written by Yuri Victorovich Flores and published by . This book was released on 2015 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optical Measurement on Quantum Cascade Lasers Using Femtosecond Pulses written by Hong Cai and published by . This book was released on 2014 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum cascade lasers (QCLs) as the state-of-the-art mid-infrared (mid-IR) coherent sources have been greatly developed in aspects such as output power, energy efficiency and spectral purity. However, there are additional applications of QCLs in high demand, namely mode-locking, mid-IR modulation, etc. The inherent optical properties and ultrafast carrier dynamics can lead to solutions to these challenges. In this dissertation, we further characterize QCLs using mid-IR femtosecond (fs) pulses generated from a laser system consisting of a Ti:sapphire oscillator, a Ti:sapphire regenerative amplifier, an optical parametric amplifier and a difference frequency generator.
Download or read book Optical and Thermal Properties of InP based Mid infrared Quantum Cascade Lasers written by and published by . This book was released on 2007 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Theoretical Study of Mid infrared Quantum Cascade Lasers written by Xiaoliang He and published by . This book was released on 2019 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Broadly Tunable Mid infrared Quantum Cascade Lasers for Spectroscopic Applications written by Richard Maulini and published by . This book was released on 2006 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantum Cascade Lasers and Optical Metamaterials written by Matthew David Escarra and published by . This book was released on 2011 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt:
