Download or read book 1996 IEEE Real Time Technology and Applications Symposium written by Kevin Jeffay and published by . This book was released on 1996 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Real Time Technology and Applications Symposium 1996 IEEE written by Kevin Jeffay and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents papers from the June 1996 symposium. Sessions cover the latest information in fault tolerance, formal verification methods, scheduling theory, CASE tools and environments, compiler and programming language support, timing analysis, database technology, artificial intelligence, operating sys

Download or read book Real Time Systems written by Albert M. K. Cheng and published by John Wiley & Sons. This book was released on 2003-03-27 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a comprehensive overview of the subject rather than a collection of papers. The author is a recognized authority in the field as well as an outstanding teacher lauded for his ability to convey these concepts clearly to many different audiences. A handy reference for practitioners in the field.

Download or read book Real Time Database Systems written by Azer Bestavros and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the growing interest in Real-Time Database Systems, there is no single book that acts as a reference to academics, professionals, and practitioners who wish to understand the issues involved in the design and development of RTDBS. Real-Time Database Systems: Issues and Applications fulfills this need. This book presents the spectrum of issues that may arise in various real-time database applications, the available solutions and technologies that may be used to address these issues, and the open problems that need to be tackled in the future. With rapid advances in this area, several concepts have been proposed without a widely accepted consensus on their definitions and implications. To address this need, the first chapter is an introduction to the key RTDBS concepts and definitions, which is followed by a survey of the state of the art in RTDBS research and practice. The remainder of the book consists of four sections: models and paradigms, applications and benchmarks, scheduling and concurrency control, and experimental systems. The chapters in each section are contributed by experts in the respective areas. Real-Time Database Systems: Issues and Applications is primarily intended for practicing engineers and researchers working in the growing area of real-time database systems. For practitioners, the book will provide a much needed bridge for technology transfer and continued education. For researchers, this book will provide a comprehensive reference for well-established results. This book can also be used in a senior or graduate level course on real-time systems, real-time database systems, and database systems or closely related courses.

Download or read book Real Time and Embedded Computing Systems and Applications written by Jing Chen and published by Springer Science & Business Media. This book was released on 2004-05-21 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the 9th International Conference on Real-Time and Embedded Systems and Applications, RTCSA 2003, held in Tainan, Taiwan, in February 2003. The 28 revised full papers and 9 revised short papers presented were carefully reviewed and selected for inclusion in the book. The papers are organized in topical sections on scheduling, networking and communication, embedded systems and environments, pervasive and ubiquitous computing, systems and architectures, resource management, file systems and databases, performance analysis, and tools and development.

Download or read book Real Time Database Systems written by Kam-Yiu Lam and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, tremendous research has been devoted to the design of database systems for real-time applications, called real-time database systems (RTDBS), where transactions are associated with deadlines on their completion times, and some of the data objects in the database are associated with temporal constraints on their validity. Examples of important applications of RTDBS include stock trading systems, navigation systems and computer integrated manufacturing. Different transaction scheduling algorithms and concurrency control protocols have been proposed to satisfy transaction timing data temporal constraints. Other design issues important to the performance of a RTDBS are buffer management, index accesses and I/O scheduling. Real-Time Database Systems: Architecture and Techniques summarizes important research results in this area, and serves as an excellent reference for practitioners, researchers and educators of real-time systems and database systems.

Download or read book Specification and Design Methodology for Real Time Embedded Systems written by Randall S. Janka and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Specification and design methodology has seen significant growth as a research area over the last decade, tracking but lagging behind VLSI design technology in general and the CAD industry in particular. The commercial rush to market tries to leverage existing technology which fuels CAD design tool development. Paralleling this is very active basic and applied research to investigate and move forward rational and effective methodologies for accomplishing digital design, especially in the field of hardware/software codesign. It is this close relationship between industry and academia that makes close cooperation between researchers and practitioners so important-and monographs like this that combine both abstract concept and pragmatic implementation deftly bridge this often gaping chasm. It was at the IEEE/ACM Eighth International Symposium on Hardware/Software Codesign where I met the author of this monograph, Dr. Randall Janka, who was presenting some of his recent dissertation research results on specification and design methodology, or as he has so succinctly defined this sometimes ambiguous concept, "the tools and rules." Where so many codesign researchers are trying to prove out different aspects of codesign and using toy applications to do so, Dr. Janka had developed a complete specification and design methodology and prototyped the infrastructure-and proven its viability, utility, and effectiveness using a demanding real-world application of a real-time synthetic aperture radar imaging processor that was implemented with embedded parallel processors.

Download or read book Hybrid Systems Computation and Control written by Alberto Bemporad and published by Springer. This book was released on 2007-05-31 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 10th International Conference on Hybrid Systems: Computation and Control, HSCC 2007, held in Pisa, Italy in April 2007. Among the topics addressed are models of heterogeneous systems, computability and complexity issues, real-time computing and control, embedded and resource-aware control, control and estimation over wireless networks, and programming languages support and implementation.

Download or read book Distributed Systems for System Architects written by Paulo Veríssimo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary audience for this book are advanced undergraduate students and graduate students. Computer architecture, as it happened in other fields such as electronics, evolved from the small to the large, that is, it left the realm of low-level hardware constructs, and gained new dimensions, as distributed systems became the keyword for system implementation. As such, the system architect, today, assembles pieces of hardware that are at least as large as a computer or a network router or a LAN hub, and assigns pieces of software that are self-contained, such as client or server programs, Java applets or pro tocol modules, to those hardware components. The freedom she/he now has, is tremendously challenging. The problems alas, have increased too. What was before mastered and tested carefully before a fully-fledged mainframe or a closely-coupled computer cluster came out on the market, is today left to the responsibility of computer engineers and scientists invested in the role of system architects, who fulfil this role on behalf of software vendors and in tegrators, add-value system developers, R&D institutes, and final users. As system complexity, size and diversity grow, so increases the probability of in consistency, unreliability, non responsiveness and insecurity, not to mention the management overhead. What System Architects Need to Know The insight such an architect must have includes but goes well beyond, the functional properties of distributed systems.

Download or read book Multiprocessor Systems on Chips written by Ahmed Jerraya and published by Morgan Kaufmann. This book was released on 2005 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern system-on-chip (SoC) design shows a clear trend toward integration of multiple processor cores on a single chip. Designing a multiprocessor system-on-chip (MPSOC) requires an understanding of the various design styles and techniques used in the multiprocessor. Understanding the application area of the MPSOC is also critical to making proper tradeoffs and design decisions. Multiprocessor Systems-on-Chips covers both design techniques and applications for MPSOCs. Design topics include multiprocessor architectures, processors, operating systems, compilers, methodologies, and synthesis algorithms, and application areas covered include telecommunications and multimedia. The majority of the chapters were collected from presentations made at the International Workshop on Application-Specific Multi-Processor SoC held over the past two years. The workshop assembled internationally recognized speakers on the range of topics relevant to MPSOCs. After having refined their material at the workshop, the speakers are now writing chapters and the editors are fashioning them into a unified book by making connections between chapters and developing common terminology. *Examines several different architectures and the constraints imposed on them *Discusses scheduling, real-time operating systems, and compilers *Analyzes design trade-off and decisions in telecommunications and multimedia applications

Download or read book Languages Compilers and Tools for Embedded Systems written by Frank Mueller and published by Springer Science & Business Media. This book was released on 1998 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the strictly refereed post-workshop proceedings of the ACM SIGPLAN Workshop on Languages, Compilers, and Tools for Embedded Systems, LCTES '98, held in Montreal, Canada, in June 1998. The 19 revised papers presented were carefully reviewed and selected from a total of 54 submissions for inclusion in the book; also included are one full paper and an abstract of an invited contribution. The papers address all current aspects of research and development in the rapidly growing area of embedded systems and real-time computing.

Download or read book Computational Science ICCS 2004 written by Marian Bubak and published by Springer Science & Business Media. This book was released on 2004-05-26 with total page 1376 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Computational Science (ICCS 2004) held in Krak ́ ow, Poland, June 6–9, 2004, was a follow-up to the highly successful ICCS 2003 held at two locations, in Melbourne, Australia and St. Petersburg, Russia; ICCS 2002 in Amsterdam, The Netherlands; and ICCS 2001 in San Francisco, USA. As computational science is still evolving in its quest for subjects of inves- gation and e?cient methods, ICCS 2004 was devised as a forum for scientists from mathematics and computer science, as the basic computing disciplines and application areas, interested in advanced computational methods for physics, chemistry, life sciences, engineering, arts and humanities, as well as computer system vendors and software developers. The main objective of this conference was to discuss problems and solutions in all areas, to identify new issues, to shape future directions of research, and to help users apply various advanced computational techniques. The event harvested recent developments in com- tationalgridsandnextgenerationcomputingsystems,tools,advancednumerical methods, data-driven systems, and novel application ?elds, such as complex - stems, ?nance, econo-physics and population evolution.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Mohammad S. Obaidat and published by Springer. This book was released on 2017-10-26 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Proceedings book reports on new and innovative solutions regarding methodologies and applications of modeling and simulation. It includes a set of selected, extended papers from the 6th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2016), held in Lisbon, Portugal, from 29 to 31 July, 2016. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. SIMULTECH 2016 received 76 submissions from 35 countries and all continents. After a double-blind paper review performed by the Program Committee, 18% were accepted as full papers and thus selected for oral presentations. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers from SIMULTECH 2016.

Download or read book Model Driven Engineering and Software Development written by Slimane Hammoudi and published by Springer. This book was released on 2019-01-31 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes thoroughly revised and selected papers from the 6th International Conference on Model-Driven Engineering and Software Development, MODELSWARD 2018, held in Funchal, Madeira, Portugal, in January 2018. The 22 thoroughly revised and extended papers presented in this volume were carefully reviewed and selected from 101 submissions. They contribute to the development of highly relevant research trends in model-driven engineering and software development such as innovative methods for MDD-based development and testing of web-based applications and user interfaces, support for development of Domain-Specific Languages (DSLs), MDD-based application development on multiprocessor platforms, advances in MDD tooling, formal semantics and behaviour modelling, and MDD-based product-line engineering.

Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.

Download or read book Active Real Time and Temporal Database Systems written by Sten F. Andler and published by Springer. This book was released on 2003-06-26 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: Database systems of the next generation are likely to be inherently very complex due to the diversity of requirements placed on them. Incorporating active, real time, and temporal virtues in one database system is an arduous effort but is also a commend able one. This book presents the proceedings of the Second International Workshop on Active, Real Time, and Temporal Database Systems (ARTDB 97), held in Como, Milan, in September 1997. The aim of the workshop was to bring researchers together from the active and real time research communities, and to examine the current state of the art in active, real time, and temporal database systems. This book offers a collection of papers presented at the ARTDB 97 workshop. The papers, many of them representing proficient and tenable results, illuminate the feasibility of building database system supporting reactive behavior, while enforcing timeliness and predictability. The book contains nine papers carefully reviewed and accepted by the program committee, three invited papers written by prominent researchers in the field, and two summaries of the panel discussions held at the workshop. The program committee received seventeen submissions, where each submission was reviewed by at least three program committee members. The two panel sessions focused on predictability issues and on practical experience of active, real time, and temporal database systems. The ARTDB 97 workshop was held in cooperation with the IEEE Technical Committees on Real Time Systems and Complexity in Computing, and the ACM Special Interest Group on Manipulation of Data.

Download or read book Parallel Computer Routing and Communication written by Sudhakar Yalamanchili and published by Springer. This book was released on 2003-06-26 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workshop was a continuation of the PCRCW ’94 workshop that focused on issues in parallel communication and routing in support of parallel processing. The workshop series provides a forum for researchers and designers to exchange ideas with respect to challenges and issues in supporting communication for high-performance parallel computing. Within the last few years we have seen the scope of interconnection network technology expand beyond traditional multiprocessor systems to include high-availability clusters and the emerging class of system area networks. New application domains are creating new requirements for interconnection network services, e.g., real-time video, on-line data mining, etc. The emergence of quality-of-service guarantees within these domains challenges existing approaches to interconnection network design. In the recent past we have seen the emphasis on low-latency software layers, the application of multicomputer interconnection technology to distributed shared-memory multiprocessors and LAN interconnects, and the shift toward the use of commodity clusters and standard components. There is a continuing evolution toward powerful and inexpensive network interfaces, and low-cost, high-speed routers and switches from commercial vendors. The goal is to address the above issues in the context of networks of workstations, multicomputers, distributed shared-memory multiprocessors, and traditional tightly-coupled multiprocessor interconnects. The PCRCW ’97 workshop presented 20 regular papers and two short papers covering a range of topics dealing with modern interconnection networks. It was hosted by the Georgia Institute of Technology and sponsored by the Atlanta Chapter of the IEEE Computer Society.