Download or read book 1985 International Symposium on Wood and Pulping Chemistry written by and published by . This book was released on 1985 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper Chemistry and Technology written by Monica Ek and published by Walter de Gruyter. This book was released on 2009 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The production of forestry products is based on a complex chain of knowledge in which the biological material wood with all its natural variability is converted into a variety of fiber-based products, each one with its detailed and specific quality requirements. This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. Supported by a grant from the Ljungberg Foundation, the Editors at the Royal Institute of Technology, Stockholm, Sweden coordinated over 30 authors from university and industry to create this comprehensive overview. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources."--Publisher's description.
Download or read book Biodeterioration 7 written by D. R. Houghton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the magnificent response to the call for papers for the 7th International Biodeterioration Symposium held at Cambridge, UK, some difficulties have been experienced in the editing of these proceedings. The numbers of papers submitted exceeded expectation and because of this it has been necessary to accommodate those not actually in the proceedings into the International Biodeterioration journal. A small number of papers were not suitable for publication and were therefore eliminated. Many authors disregarded the guidelines laid down for the length of submitted papers. However, every attempt has been made to accommodate the maximum number of contributions in the proceedings. The original selection included those which most nearly conformed to the length requirement. Even so this has meant, in many cases, cutting down the text, eliminating tables and/or illustrations and pruning the reference list. When references have been trimmed a note has been included to the effect that an extended list may be obtained from the author/senior author. Where it was not possible to carry out these procedures without seriously altering the text and the import of the paper they have been included amongst those to be published in the journal International Biodeterioration. The exceptions to the procedures outlined above are the invited review papers which have been presented in full. Happily, the authors have been conscientious in keeping to the guidelines laid down for these contributions.
Download or read book Holzforschung written by and published by . This book was released on 1987 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Pulp 2 Volume Set written by Herbert Sixta and published by John Wiley & Sons. This book was released on 2006-03-17 with total page 1411 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this two volume set, Dr. Herbert Sixta, head of the cellulose and viscose research department at Lenzing AG in Austria, has brought together a team of authors to produce the first comprehensive handbook on the market. Alongside the traditional aspects of pulping processes, pulp used in industry and paper pulps, this book describes all pulping processes used for paper and board manufacturing as well as waste liquor treatment, pulp bleaching and environmental aspects, while also covering pulp properties and applications. From the content: - Chemical Pulp - Mechanical Pulp - Recovered Paper and Recycled Fibers - Analytical Characterization of Pulps This handbook is essential reading for all chemists and engineers in the paper and pulp industry.
Download or read book Lignin and Lignans written by Cyril Heitner and published by CRC Press. This book was released on 2016-04-19 with total page 833 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past four decades, there has been immense progress in every area of lignin science, ranging from the enzymology of lignin biodegradation, to the delignification of wood fiber during pulping and bleaching, to advances in spectroscopy. Lignin and Lignans: Advances in Chemistry captures the developments that have been achieved by world-class
Download or read book Organosolv Pulping written by Esa Muurinen and published by . This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seventeenth Symposium on Biotechnology for Fuels and Chemicals written by Charles E. Wyman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Seventeenth Symposium on Biotechnology for Fuels and Chemicals, leading researchers from academia, industry, and government present state-of-the-art papers on how bioengineering can be used to produce fuels and chemicals competitively. This year's program covered topics in thermal, chemical, and biological processing; applied biological processing; bioprocessing research; process economics and commercialization; and environmental biotechnology. The ideas and techniques described will play an important role in developing new biological processes for producing fuels and chemicals on a large scale, and in reducing pollution, waste disposal problems, and the potential for global climate change.
Download or read book Recent Advances in Environmentally Compatible Polymers written by J F Kennedy and published by Elsevier. This book was released on 2001-10-26 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the proceedings of the eleventh international Cellucon conference held in Tsukuba, Japan, this book offers a comprehensive overview of important research undertaken into all aspects of environmentally compatible polymers.It deals with natural and synthetic polymer materials such as gels, fibres, pulp and paper, films, foams, blends and composites and shows how environmental compatibility such as biodegradability and recyclability can be developed by utilising natural polymers such as polysaccharides and polyphenols. - Based on the proceedings of the eleventh international Cellucon conference held in Tsukuba, Japan - Offers a comprehensive overview of important research undertaken into all aspects of environmentally compatible polymers - Deals with natural and synthetic polymer materials such as gels, fibres, pulp and paper, films, foams, blends and composites
Download or read book Lignocellulosic Fibers and Wood Handbook written by Mohamed Naceur Belgacem and published by John Wiley & Sons. This book was released on 2016-04-14 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will focus on lignocellulosic fibres as a raw material for several applications. It will start with wood chemistry and morphology. Then, some fibre isolation processes will be given, before moving to composites, panel and paper manufacturing, characterization and aging.
Download or read book Environmentally Benign Approaches for Pulp Bleaching written by Pratima Bajpai and published by Elsevier. This book was released on 2012-05-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper production has increased globally and will continue to increase in the near future. Approximately 155 million tons of wood pulp is produced worldwide and about 260 million is projected for 2010. To cope with the increasing demand, an increase in production and improved environmental performance is needed as the industry is under constant pressure to reduce environmental emissions to air and water. This book gives updated information on environmentally benign approaches for pulp bleaching, which can help solve the problems associated with conventional bleaching technologies. Main focus is on the environmentally-friendly technologies that can help solve some of the problems associated with conventional bleaching technologies Information given is up-to-date, authoritative, and cites the experiences of many mills and pertinent research, which is of interest to those working in the industry or intending to do so Covers in great depth all the aspects of various bleaching processes including environmental issues
Download or read book Wood Processing and Utilization written by Glyn O. Phillips and published by . This book was released on 1989 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Fate and Effects of Pulp and Paper written by Mark R. Servos and published by CRC Press. This book was released on 2020-02-03 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there have been emerging concerns regarding the fate and effects of pulp and paper mill effluents on the environment. Countries throughout the world are focusing attention on the implementation of regulatory and monitoring programs. In response, industry has begun to implement a variety of process and treatment technologies designed to minimize or eliminate the potential impacts. Environmental Fate and Effects of Pulp and Paper Mill Effluents explores the most active and critical current research and experimentation from around the world. This comprehensive overview examines the identity and origin of chemicals in pulp mill effluents, environmental fate of chemicals from pulp and paper mills, bioaccumulation of substances from pulp mills to fish and wildlife, field and laboratory studies of biochemical and whole organism responses associated with pulp and paper effluents, integrated monitoring and future research, and policy directions of this rapidly evolving field. Written by prominent scientists from around the world with contributions from industry, government, and academia, this important new book provides a balanced global perspective of the recent scientific findings and the challenges being faced in the immediate future.
Download or read book Chemical Modification Properties and Usage of Lignin written by Thomas Q. Hu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most significant challenges facing mankind in the twenty-first century is the development of a sustainable global economy. Within the scientific community, this calls for the development of processes and technologies that will allow the sustainable production of materials from renewable natural resources. Plant material, in particular lignin, is one such resource. During the annual production of about 100 million metric tons of chemical wood pulps worldwide, approximately 45 and 2 million metric tons/year of kraft lignin and lignosulfonates, respectively, are also generated. Although lignosulfonates have found many applications outside the pulp and paper industry, the majority of kraft lignin is being used internally as a low-grade fuel for the kraft pulping operation. A surplus of kraft lignin will become available as kraft mills increase their pulp production without expanding the capacity of their recovery boilers that utilize lignin as a fuel. There is a tremendous opportunity and an enormous economic incentive to find better uses of kraft lignin, lignosulfonates and other industriallignins. The pulp and paper industry not only produces an enormous amount of lignins as by products of chemical wood pulps, but it also utilizes about 10 million metric tons of lignin per year as a component of mechanical wood pulps and papers. Mechanical wood pulps, produced in a yield of 90-98% with the retention of lignin, are mainly used to make low-quality, non-permanent papers such as newsprint and telephone directories because of the light-induced photooxidation of lignin and the yellowing of the papers.
Download or read book Cellulose and Cellulose Derivatives written by Kenji Kamide and published by Elsevier. This book was released on 2005-08-31 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many highly acclaimed and authoritative books on polymer science tend to focus on synthetic polymers. Cellulose and Cellulose Derivatives is the first authoritative book on the subject. It examines recent developments, with particular reference to cellulose (in aqueous alkali) and cellulose acetate. Packed with examples, the author takes an in-depth look at the topic, using the most reliable experimental data available. A comprehensive approach to the fundamental principles of cellulose and its derivatives in solution makes Cellulose and Cellulose Derivatives ideal reading for novices as well as experienced cellulose scientists.* Outlines the theoretical fundamentals of cellulose and cellulose derivatives* Presents comprehensive and reliable experimental results in figures and tables * Highly illustrated and easy to read
Download or read book Cereal Straw as a Resource for Sustainable Biomaterials and Biofuels written by RunCang Sun and published by Elsevier. This book was released on 2010-01-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials from renewable resources are receiving increased attention, as leading industries and manufacturers attempt to replace declining petrochemical-based feedstocks with products derived from natural biomass, such as cereal straws. Cereal straws are expected to play an important role in the shift toward a sustainable economy, and a basic knowledge of the composition and structure of cereal straw is the key to using it wisely. Cereal Straw as a Resource for Sustainable Biomaterials and Biofuels: Chemistry, Extractives, Lignins, Hemicelluloses and Cellulose provides an introduction to straw chemistry. Topics discussed include the structure, ultrastructure, and chemical composition of straw; the structure and isolation of extractives from the straw; the three main components of straw: cellulose, hemicelluloses, and lignins; and chemical modifications of straw for industrial applications. This book will be helpful to scientists interested in the areas of natural resource management, environmental chemistry, plant chemistry, material science, polysaccharide chemistry, and lignin chemistry. It will also be of interest to academic and industrial scientists/researchers interested in novel applications of agricultural residues for industrial and/or recycling technologies. - Provides the basics of straw composition and the structure of its cell walls - Details the procedures required to fractionate straw components to produce chemical derivatives from straw cellulose, hemicelluloses, and lignins - Elucidates new techniques for the production of biodegradable materials for the energy sector, chemical industry, and pulp and paper business
