Download or read book 140 GHz Quasi optical Frequency Selective Surfaces Notch Filter Design written by Yaping Liang and published by . This book was released on 2004 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frequency Selective Surface Notch Filter in Plasma Diagnostics System written by Zuowei Shen and published by . This book was released on 2006 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Millimeter wave Technologies written by Duixian Liu and published by John Wiley & Sons. This book was released on 2009-04-06 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains one of the hottest topics in wireless and electronic devices community, namely the wireless communication at mmWave frequencies, especially at the 60 GHz ISM band. It provides the reader with knowledge and techniques for mmWave antenna design, evaluation, antenna and chip packaging. Addresses practical engineering issues such as RF material evaluation and selection, antenna and packaging requirements, manufacturing tolerances, antenna and system interconnections, and antenna One of the first books to discuss the emerging research and application areas, particularly chip packages with integrated antennas, wafer scale mmWave phased arrays and imaging Contains a good number of case studies to aid understanding Provides the antenna and packaging technologies for the latest and emerging applications with the emphases on antenna integrations for practical applications such as wireless USB, wireless video, phase array, automobile collision avoidance radar, and imaging
Download or read book Frequency Selective Surface and Grid Array written by T. K. Wu and published by Wiley-Interscience. This book was released on 1995-07-31 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new addition to the prestigious Wiley Series in Microwave and Optical Engineering presents the first comprehensive coverage of Frequency Selective Surfaces (FSS) and active grid arrays, the two-dimensional periodically arranged array elements which may be etched on, or imbedded in, one or multiple layers of dielectric laminates. Because of its filtering frequency properties, this technology, which has attracted much interest over the past two decades, is being used to create filtering devices in microwave and higher frequency bands. With Frequency Selective Surface and Grid Array, it is no longer necessary to sift through a multitude of research papers and reports. Here, in one self-contained volume, is a thorough and up-to-date treatment of the concept, theory, applications, design, and fabrication techniques for periodic arrays. Furthermore, the book provides a complete reference for the technological advances in FSS, including the recent technology of active grid arrays. The first part of the book is devoted to the fundamentals and analytical techniques pertaining to FSS and grid arrays, including the advanced analyses of the conjugate gradient method and the generalized mode-matching technique with multiple dielectrics or nonsimilar grid arrays. In the second part, the book deals with implementation and application, describing the numerous applications of this technology, from the reflector antenna system used in satellite and spacecraft communications and bandpass radome to solar energy grids. The expert contributions to this volume make it useful both as a tutorial and as a reference for project and system/design engineers working with antennas, optics, millimeter waves, microwaves, radar, and low observable radomes. A comprehensive and self-contained reference for FSS and grid array technology Frequency Selective Surfaces (FSS), the two-dimensional periodic array elements with frequency filtering properties, have made important advances over the past two decades. They provide filtering devices in microwave and higher frequency bands with applications ranging from bandpass radome to solar energy grids—including satellite and spacecraft communications. Written by experts in the field and edited by Dr. T. K. Wu, an internationally recognized researcher in electromagnetics, Frequency Selective Surface and Grid Array provides the first comprehensive look at the theory, measurements, manufacturing, and applications of FSS and grid array technology. This publication brings together a wealth of information previously not available in book form, as well as material that has not been published anywhere, including: Passive and active grid design concepts and analysis, as well as FSS materials and fabrication techniques Practical design of frequency selective surface, high-performance bandpass radome, and active grid array Detailed equations for the reaction integrals Three computer codes to get readers started in the design of FSS and grid array (disk included) Case studies of FSS applications to multiband communication antenna systems Tables, figures, references, and numerous examples of practical FSS and grid array designs A tutorial analysis that includes the multilayer grid and dielectrics Frequency Selective Surface and Grid Array is an invaluable planning and design resource for research engineers and scientists dealing with FSS and grid array, as well as a handy reference for students and professionals entering the field.
Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.
Download or read book Femtosecond Optical Frequency Comb Principle Operation and Applications written by Jun Ye and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years, there has been a convergence between the fields of ultrafast science, nonlinear optics, optical frequency metrology, and precision laser spectroscopy. These fields have been developing largely independently since the birth of the laser, reaching remarkable levels of performance. On the ultrafast frontier, pulses of only a few cycles long have been produced, while in optical spectroscopy, the precision and resolution have reached one part in Although these two achievements appear to be completely disconnected, advances in nonlinear optics provided the essential link between them. The resulting convergence has enabled unprecedented advances in the control of the electric field of the pulses produced by femtosecond mode-locked lasers. The corresponding spectrum consists of a comb of sharp spectral lines with well-defined frequencies. These new techniques and capabilities are generally known as “femtosecond comb technology. ” They have had dramatic impact on the diverse fields of precision measurement and extreme nonlinear optical physics. The historical background for these developments is provided in the Foreword by two of the pioneers of laser spectroscopy, John Hall and Theodor Hänsch. Indeed the developments described in this book were foreshadowed by Hänsch’s early work in the 1970s when he used picosecond pulses to demonstrate the connection between the time and frequency domains in laser spectroscopy. This work complemented the advances in precision laser stabilization developed by Hall.
Download or read book Frequency Standards written by Fritz Riehle and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of all measurement units, frequency is the one that may be determined with the highest degree of accuracy. It equally allows precise measurements of other physical and technical quantities, whenever they can be measured in terms of frequency. This volume covers the central methods and techniques relevant for frequency standards developed in physics, electronics, quantum electronics, and statistics. After a review of the basic principles, the book looks at the realisation of commonly used components. It then continues with the description and characterisation of important frequency standards from atomic clocks, to frequency stabilised lasers. The whole is rounded of with a discussion of topical applications in engineering, telecommunications, and metrology.
Download or read book RFID Handbook written by Klaus Finkenzeller and published by John Wiley & Sons. This book was released on 2010-11-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third revised edition of the established and trusted RFID Handbook; the most comprehensive introduction to radio frequency identification (RFID) available. This essential new edition contains information on electronic product code (EPC) and the EPC global network, and explains near-field communication (NFC) in depth. It includes revisions on chapters devoted to the physical principles of RFID systems and microprocessors, and supplies up-to-date details on relevant standards and regulations. Taking into account critical modern concerns, this handbook provides the latest information on: the use of RFID in ticketing and electronic passports; the security of RFID systems, explaining attacks on RFID systems and other security matters, such as transponder emulation and cloning, defence using cryptographic methods, and electronic article surveillance; frequency ranges and radio licensing regulations. The text explores schematic circuits of simple transponders and readers, and includes new material on active and passive transponders, ISO/IEC 18000 family, ISO/IEC 15691 and 15692. It also describes the technical limits of RFID systems. A unique resource offering a complete overview of the large and varied world of RFID, Klaus Finkenzeller’s volume is useful for end-users of the technology as well as practitioners in auto ID and IT designers of RFID products. Computer and electronics engineers in security system development, microchip designers, and materials handling specialists benefit from this book, as do automation, industrial and transport engineers. Clear and thorough explanations also make this an excellent introduction to the topic for graduate level students in electronics and industrial engineering design. Klaus Finkenzeller was awarded the Fraunhofer-Smart Card Prize 2008 for the second edition of this publication, which was celebrated for being an outstanding contribution to the smart card field.
Download or read book Introduction to Ultra Wideband for Wireless Communications written by Homayoun Nikookar and published by Springer Science & Business Media. This book was released on 2008-10-11 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: asakta-buddhih sarvatra . jitatma vigata-sprhah . . . . naiskarmya-siddhim paramam . sannyasenadhigacchati Detached by spiritual intelligence from everything controlling the mind, without material desires, one attains the paramount perfection in cessation of re- tions by renunciation. The Bhagvad Gita (18.49) Compared to traditional carrier-based, Ultra-Wide Band (UWB), or carrier-less, systems implement new paradigms in terms of signal generation and reception. Thus, designing an UWB communication system requires the understanding of how excess bandwidth and very low transmitted powers can be used jointly to provide a reliable radio link. UWB offers systems transceiver potential for very simple implementations. Comparison between UWB and traditional narrow-band systems highlights the following features: Large bandwidth enables very fine time-space resolution for accurate lo- tion of the UWB nodes and for distributing network time stamps. Very short pulses are effectively counter-fighting the channel effect in very dense multipath environments. Data rate (number of pulses transmitted per bit) can be traded with power emission control and distance coverage. Very low power density leads to low probability of signal detection and adds security for all the layers of the communication stack. Very low power density is obtained through radio regulation emission masks; UWB systems are suitable for coexistence with already deployed narrow-band systems.
Download or read book Electronic Beam Steering and Polarization Agile Planar Antennas in Liquid Crystal Technology written by Onur Hamza Karabey and published by Springer Science & Business Media. This book was released on 2013-08-04 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the characterization of liquid crystal materials at microwave frequencies and the usage of these materials in reconfigurable planar antennas and in their electrical tunable components. It reports for the first time the realization of a two-dimensional electronic beam steering antenna and polarization agile planar antennas with liquid crystal display technology. It gives a detailed description of all the theoretical analyses, modeling and design methods that were involved in the realization of these devices as well as their validation using measurement of demonstrative prototypes. This book also shows that low profile, low cost, high gain, electronic beam steering and polarization agile antennas can be fabricated in larger sizes by using existing automated liquid crystal display manufacturing techniques. The innovative ideas and method described in this work represent a considerable advancement in the field of electronically reconfigurable antennas based on liquid crystal technology and are expected to draw significant interest in the future. Such antennas may become important, for example, in mobile terminals integrated into the body of laptops (in the cover) or of automobiles (in the rooftop), ships or boats, for which flat, low-profile and low-cost antennas are required.
Download or read book Novel Technologies for Microwave and Millimeter Wave Applications written by Jean-Fu Kiang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Technologies for Microwave and Millimeter-Wave Applications provides an overview of current research status in selected field, to facilitate a learning process from concepts to practices, from component design to system architecture, and from small scale to large scale. Each chapter focuses on a topic and is organized to be self-sufficient. Contents in each chapter include concise description of relevant background information, major issues, current trend and future challenges. Useful references are also listed for further reading. Novel Technologies for Microwave and Millimeter-Wave Applications is suitable as a textbook for senior or graduate courses in microwave engineering.
Download or read book Microwave Circuit Design Using Linear and Nonlinear Techniques written by George D. Vendelin and published by John Wiley & Sons. This book was released on 2005-10-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ultimate handbook on microwave circuit design with CAD. Full of tips and insights from seasoned industry veterans, Microwave Circuit Design offers practical, proven advice on improving the design quality of microwave passive and active circuits-while cutting costs and time. Covering all levels of microwave circuit design from the elementary to the very advanced, the book systematically presents computer-aided methods for linear and nonlinear designs used in the design and manufacture of microwave amplifiers, oscillators, and mixers. Using the newest CAD tools, the book shows how to design transistor and diode circuits, and also details CAD's usefulness in microwave integrated circuit (MIC) and monolithic microwave integrated circuit (MMIC) technology. Applications of nonlinear SPICE programs, now available for microwave CAD, are described. State-of-the-art coverage includes microwave transistors (HEMTs, MODFETs, MESFETs, HBTs, and more), high-power amplifier design, oscillator design including feedback topologies, phase noise and examples, and more. The techniques presented are illustrated with several MMIC designs, including a wideband amplifier, a low-noise amplifier, and an MMIC mixer. This unique, one-stop handbook also features a major case study of an actual anticollision radar transceiver, which is compared in detail against CAD predictions; examples of actual circuit designs with photographs of completed circuits; and tables of design formulae.
Download or read book Photonic Microresonator Research and Applications written by Ioannis Chremmos and published by Springer. This book was released on 2010-06-09 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology surrounding the design and fabrication of optical microresonators has matured to a point where there is a need for commercialization. Consequently, there is a need for device research involving more advanced architectures and more esoteric operating principles. Photonic Microresonator Research and Applications explores advances in the fabrication process that enable nanometer waveguide separations, exceptionally smooth surfaces essential to reach Q factors in the order of 106- 108 and high index contrast materials.
Download or read book Corrugated Horns for Microwave Antennas written by P. J. B. Clarricoats and published by IET. This book was released on 1984 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrugated horns are widely used and highly efficient, especially in their use as feeds for microwave reflector antennas. This book is devoted to the theory and design of corrugated horns and scalar feeds and explains why hybrid mode feeds are ideal feeds for reflectors.
Download or read book Analog Seekrets written by Leslie Green and published by . This book was released on 2007-10 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook has been written by a practicing professional electronics design engineer for the following specific groups: 1. Final year students in electronic engineering and related subjects. 2. Final year physics students taking an electronics option. 3. Junior design engineers who seek rapid career progression. 4. Mature digital designers who seek a broader skill set, to include real-world interfaces, measurements and other analog skills.
Download or read book Fractal Apertures in Waveguides Conducting Screens and Cavities written by Basudeb Ghosh and published by Springer. This book was released on 2014-06-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and analysis of fractal apertures in waveguides, conducting screens and cavities using numerical electromagnetics and field-solvers. The aim is to obtain design solutions with improved accuracy for a wide range of applications. To achieve this goal, a few diverse problems are considered. The book is organized with adequate space dedicated for the design and analysis of fractal apertures in waveguides, conducting screens and cavities, microwave/millimeter wave applications followed by detailed case-study problems to infuse better insight and understanding of the subject. Finally, summaries and suggestions are given for future work. Fractal geometries were widely used in electromagnetics, specifically for antennas and frequency selective surfaces (FSS). The self-similarity of fractal geometry gives rise to a multiband response, whereas the space-filling nature of the fractal geometries makes it an efficient element in antenna and FSS unit cell miniaturization. Until now, no efforts were made to study the behavior of these fractal geometries for aperture coupling problems. The aperture coupling problem is an important boundary value problem in electromagnetics and used in waveguide filters and power dividers, slotted ground planes, frequency selective surfaces and metamaterials. The present book is intended to initiate a study of the characteristics of fractal apertures in waveguides, conducting screens and cavities. To perform a unified analysis of these entirely dissimilar problems, the “generalized network formulation of the aperture problems” by Mautz and Harrington was extended to multiple-aperture geometry. The authors consider the problem of coupling between two arbitrary regions coupled together via multiple apertures of arbitrary shape. MATLAB codes were developed for the problems and validated with the results available in the literature as well as through simulations on ANSOFT's HFSS.
Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
