Download or read book 1 Butene Production from Ethylene Cost Analysis Butene E12A written by Intratec and published by Intratec Solutions. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of 1-Butene production from ethylene. The process examined is similar to the Axens Alphabutol Process. In this process, ethylene is dimerized into butenes with high selectivity for 1-Butene. Main product 1-Butene is then separated from raffinate-2 byproduct. This report was developed based essentially on the following reference(s): Keywords: Dimerization, Axens, Alphabutol, Linear Alpha Olefins, Ethene, SABIC

Download or read book Butenes Production from Ethylene Cost Analysis Butene E11A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Butenes production from ethylene using a dimerization process. The process examined is similar to CB&I Lummus Ethylene Dimerization Technology. In this process, gasoline and fuel oil are generated as by-products. This report was developed based essentially on the following reference(s): US Patent 4242531, issued to Phillips Petroleum Company in 1980 Keywords: Olefins Dimerization, Ethene, Butylene, n-Butene, 2-Butene, Loop Reactor

Download or read book Isobutylene Production from Isobutane Cost Analysis Isobutylene E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Isobutylene production from isobutane using a dehydrogenation process. The process examined is similar to UOP Oleflex process. In this process, the dehydrogenation reaction is carried out in a moving-bed reactor. This report was developed based essentially on the following reference(s): Keywords: Isobutene, Continuous Catalyst Regeneration, CCR

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report was developed based essentially on the following reference(s): (1) US Patent 8957167, issued to Univation in 2015 (2) US Patent 20030171512, issued to Univation in 2003 (3) US Patent 8378029, issued to Univation in 2013 Keywords: Ethene, PE, Butylene, Copolymer

Download or read book Butenes Production from Propylene Cost Analysis Butene E41A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Butenes production from propylene via metathesis. The process examined is a typical metathesis process. In this process, ethylene is generated as by-product. This report was developed based essentially on the following reference(s): Keywords: Butylene, Propene, Ethene, Disproportionation

Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec and published by Intratec. This book was released on 2016-03-01 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways: * Pathway 1: Ethylene Production from Ethane * Pathway 2: Ethylene Production from Ethane and Propane * Pathway 3: Green Ethylene Production from Ethanol In Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock. The analysis presented in this report includes: * A comparison of the economic potential of the pathways listed above in several countries, comprising: - Comparative analysis of capital costs - Comparative analysis of production costs - Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: - Raw material(s) consumption figures and product(s) generated - Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration

Download or read book Ethylene Production Cost Analysis Overview Ethylene AA01 written by Intratec Solutions and published by . This book was released on 2016-03 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents alternatives for producing Ethylene from different feedstocks and a cost comparison of these alternatives, across different countries. More specifically, the report compares the costs of Ethylene production through the following pathways:* Pathway 1: Ethylene Production from Ethane* Pathway 2: Ethylene Production from Ethane and Propane* Pathway 3: Green Ethylene Production from EthanolIn Pathways 1 and 2, Ethylene is produced via steam cracking of different feedstocks: ethane and a mixture of ethane and propane. In Pathway 3, Ethylene is produced from ethanol, which is a renewable feedstock.The analysis presented in this report includes:* A comparison of the economic potential of the pathways listed above in several countries, comprising: * Comparative analysis of capital costs * Comparative analysis of production costs * Comparison between product price and raw materials costs of each pathway * An overview of each production pathway, including: * Raw material(s) consumption figures and product(s) generated * Related technology licensors and block flow diagram of representative industrial processes Keywords: Hydrocarbon Pyrolysis, Cracking Furnace, Ethene, Propene, Shale Gas, CB&I Lummus, Technip, Shaw Stone & Webster, Kellogg-Braun & Root, KBR, Linde, Green Ethylene, Braskem, Chematur Technologies, Petron Scientech, Scientific Design, Dow Chemical, BP, Ethanol Dehydration

Download or read book HDPE Production via Gas Phase Process Cost Analysis HDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of High Density Polyethylene (HDPE) bimodal production from polymer grade (PG) ethylene and 1-butene using a gas phase process. The process examined is similar to Univation UNIPOL process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, PE, Butylene, Copolymer

Download or read book Linear Alpha Olefins from Ethylene Cost Analysis LAO E12A written by Intratec and published by Intratec. This book was released on 2019-09-17 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Alpha Olefins (LAO) production from ethylene. The process examined is similar to Chevron Phillips process. In this process, ethylene is oligomerized to produce Linear Alpha Olefins ranging from C4 to C30+. This report was developed based essentially on the following reference(s): (1) "Olefins, Higher", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition (2) US Patent 5510556, issued to Chevron in 1996 Keywords: Ethene, Ethylene Oligomerization, Gulf Oil Chemicals Company

Download or read book LLDPE Production via Solution Process Cost Analysis LLDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Linear Low Density Polyethylene (LLDPE) production from polymer grade (PG) ethylene and 1-octene using a solution process. The process under analysis is similar to NOVA Chemicals Advanced SCLAIRTECH process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): US Patent 6319996, issued to Nova Chemical in 2001 Keywords: Ethene, PE, Methylpentane, Stirred-Reactor, Dual-Reactor

Download or read book Ethylene Dichloride from Ethylene and Chlorine Cost Analysis EDC E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Ethylene Dichloride (EDC) production from ethylene and chlorine using a direct chlorination process. The process examined is similar to Vinnolit process. This process consists in a liquid-phase low temperature chlorination (LTC). This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Ethene, 1,2-Dichloroethane, Vinnolit, Westlake

Download or read book BPA Production Process Cost Analysis BPA E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Bisphenol A (BPA) production from phenol and acetone. The process examined is similar to Dow's QBIS technology. In this process, BPA is produced by the reaction of acetone with phenol catalyzed by a cation-exchange resin. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Dow QBIS, High-Purity Bisphenol A, QCAT Resin

Download or read book Methanol Production from Natural Gas Cost Analysis Methanol E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of large-scale Methanol production from natural gas. The process examined employs combined reforming for syngas generation similarly to the technologies developed by the following companies: Lurgi, Toyo, KBR, Johnson Matthey/Davy and Haldor-Topsoe. In this process, natural gas is converted into syngas in two steps: steam reforming and autothermal reforming. In the steam reformer, the natural gas reacts with steam and, in the secondary (autothermal) reformer, it reacts with oxygen. The syngas generated is then converted to Methanol.This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses:* Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up* Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs* Raw materials consumption, products generation and labor requirements* Process block flow diagram and description of industrial site installations (production unit and infrastructure)This report was developed based essentially on the following reference(s):(1) US Patent 8629190, issued to Lurgi in 2014; (2) US Patent 8388864, issued to Lurgi in 2013Keywords: Synthesis Gas, Lurgi MegaMethanol, Johnson Matthey, JM Davy Technologies, Toyo, Kellogg Brown and Root, KBR, Johnson Matthey/Davy, Haldor-Topsoe

Download or read book L Lysine HCl Production from Glucose Cost Analysis Lysine E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Lysine production from glucose syrup. The process examined is a conventional fermentation process followed by ion-exchange adsorption and crystallization steps for product recovery. In this process, a 70 wt% glucose-water syrup is used as the carbon source in the fermentation the final product obtained is L-Lysine Monohydrochloride (or L-Lysine-HCl).This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses:* Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up* Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs* Raw materials consumption, products generation and labor requirements* Process block flow diagram and description of industrial site installations (production unit and infrastructure)This report was developed based essentially on the following reference(s):(1) US Patent 6479700, issued to Archer-Daniels-Midland Company in 2002; (2) US Patent 7807420, issued to Paik Kwang Industrial in 2010; (3) US Patent 5268293, issued to Cheil Sugar in 1993Keywords: Dextrose, Aerobic Fermentation, Strong Acid, Cation Exchange Resin, ADM, Amino Acids, Feed-Grade, L-Lysine-HCl

Download or read book Propylene Glycol Production from Glycerol Cost Analysis Propylene Glycol E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Propylene Glycol production from glycerol using a vapor-phase process. The process examined is similar to Davy Technologies process. In this process, technical grade glycerol (99.5 wt% glycerol content) is used as feedstock and ethylene glycol is generated as by-product. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) Keywords: Glycerin, Davy Process Technology, DPT, Propane-1,2-diol, Hydrogenolysis, Cargill, Ashland

Download or read book Terephthalic Acid Production from p Xylene Cost Analysis TPA E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-03-01 with total page 53 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Purified Terephthalic Acid (PTA) production from p-xylene. The process examined is a conventional catalytic oxidation process. In this process, p-xylene is oxidized to Terephthalic Acid. The Terephthalic Acid from reaction passes through separation and drying steps and Crude Terephthalic Acid (CTA) is obtained as an intermediate. Subsequently, the CTA is subjected to purification via hydrogenation and PTA is separated as the final product. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): (1) "Terephthalic Acid, Dimethyl Terephthalate, and Isophthalic Acid", Ullmann's Encyclopedia of Industrial Chemistry, 7th edition; (2) EP Patent 0824653, issued to DuPont in 2000 Keywords: Para-xylene, Paraxylene, TPA, CTA, Hydrogenation, Amoco, Catalytic Oxidation, Acetic Acid, BP, X Technology, PET, Polyethylene Terephthalate, Bromine

Download or read book LDPE via High Pressure Autoclave Process Cost Analysis LDPE E12A written by Intratec and published by Intratec Solutions. This book was released on 2016-05-01 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents a cost analysis of Low Density Polyethylene (LDPE) production from polymer grade (PG) ethylene. The process examined is a typical high-pressure autoclave polymerization process. This report examines one-time costs associated with the construction of a United States-based plant and the continuing costs associated with the daily operation of such a plant. More specifically, it discusses: * Capital Investment, broken down by: - Total fixed capital required, divided in production unit (ISBL); infrastructure (OSBL) and contingency - Alternative perspective on the total fixed capital, divided in direct costs, indirect costs and contingency - Working capital and costs incurred during industrial plant commissioning and start-up * Production cost, broken down by: - Manufacturing variable costs (raw materials, utilities) - Manufacturing fixed costs (maintenance costs, operating charges, plant overhead, local taxes and insurance) - Depreciation and corporate overhead costs * Raw materials consumption, products generation and labor requirements * Process block flow diagram and description of industrial site installations (production unit and infrastructure) This report was developed based essentially on the following reference(s): "Polyethylene, Low Density", Kirk-Othmer Encyclopedia of Chemical Technology, 5th edition Keywords: Ethene, PE, ICI, Equistar, Autoclave Reactor, LyondellBasell