Download or read book ZnO Thin Film Transistors for Cost Efficient Flexible Electronics written by Fábio Fedrizzi Vidor and published by Springer. This book was released on 2017-12-28 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the integration, characterization and analysis of cost-efficient thin-film transistors (TFTs), applying zinc oxide as active semiconductors. The authors discuss soluble gate dielectrics, ZnO precursors, and dispersions containing nanostructures of the material, while different transistor configurations are analyzed with respect to their integration, compatibility, and device performance. Additionally, simple circuits (inverters and ring oscillators) and a complementary design employing (in)organic semiconducting materials are presented and discussed. Readers will benefit from concise information on cost-efficient materials and processes, applied in flexible and transparent electronic technology, such as the use of solution-based materials and dispersion containing nanostructures, as well as discussion of the physical fundamentals responsible for the operation of the thin-film transistors and the non-idealities of the device.

Download or read book Material Science and Engineering Technology IX written by Ramesh K. Agarwal and published by Trans Tech Publications Ltd. This book was released on 2021-03-04 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected peer-reviewed full text papers from the 9th ICMSET, the 9th ICNNN, and the 5th ICMTA

Download or read book Nanostructured Zinc Oxide written by Kamlendra Awasthi and published by Elsevier. This book was released on 2021-08-10 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Zinc Oxide covers the various routes for the synthesis of different types of nanostructured zinc oxide including; 1D (nanorods, nanowires etc.), 2D and 3D (nanosheets, nanoparticles, nanospheres etc.). This comprehensive overview provides readers with a clear understanding of the various parameters controlling morphologies. The book also reviews key properties of ZnO including optical, electronic, thermal, piezoelectric and surface properties and techniques in order to tailor key properties. There is a large emphasis in the book on ZnO nanostructures and their role in optoelectronics. ZnO is very interesting and widely investigated material for a number of applications. This book presents up-to-date information about the ZnO nanostructures-based applications such as gas sensing, pH sensing, photocatalysis, antibacterial activity, drug delivery, and electrodes for optoelectronics. Reviews methods to synthesize, tailor, and characterize 1D, 2D, and 3D zinc oxide nanostructured materials Discusses key properties of zinc oxide nanostructured materials including optical, electronic, thermal, piezoelectric, and surface properties Addresses most relevant zinc oxide applications in optoelectronics such as light-emitting diodes, solar cells, and sensors

Download or read book Industrial Applications of Carbon Nanotubes written by Huisheng Peng and published by William Andrew. This book was released on 2016-10-08 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of Carbon Nanotubes covers the current applications of carbon nanotubes in various industry sectors, from the military to visual display products, and energy harvesting and storage. It also assesses the opportunities and challenges for increased commercialization and manufacturing of carbon nanotubes in the years ahead. Real-life case studies illustrate how carbon nanotubes are used in each industry sector covered, providing a valuable resource for scientists and engineers who are involved and/or interested in carbon nanotubes in both academia and industry. The book serves as a comprehensive guide to the varied uses of carbon nanotubes for specialists in many related fields, including chemistry, physics, biology, and textiles. Explains how carbon nanotubes can be used to improve the efficiency and performance of industrial products Includes real-life case studies to illustrate how carbon nanotubes have been successfully employed Explores how carbon nanotubes could be mass-manufactured in the future, and outlines the challenges that need to be overcome

Download or read book Inorganic and Organic Thin Films written by Yujun Song and published by John Wiley & Sons. This book was released on 2021-03-30 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn more about foundational and advanced topics in polymer thin films and coatings besides species with this powerful two-volume resource The two-volume Inorganic and Organic Thin Films: Fundamentals, Fabrication, and Applications delivers a foundational resource for current researchers and commercial users involved in the design and fabrication of thin films. The book offers newcomers to the field a thorough description of new design theory, fabrication methods, and applications of advanced thin films. Readers will discover the physics and chemistry underlying the manufacture of new thin films and coatings in this leading new resource that promises to become a handbook for future applications of the technology. This one-stop reference brings together all important aspects of inorganic and polymeric thin films and coatings, including construction, assembly, deposition, functionality, patterning, and characterization. Explorations of their applications in industries as diverse as information technology, new energy, biomedical engineering, aerospace, and oceanographic engineering round out this fulsome exploration of one of the most exciting and rapidly developing areas of scientific and industrial research today. Readers will also learn from: A comprehensive introduction to the progress of thin films and coatings as well as fundamentals in functional thin films and coatings An exploration of multi-layered magnetic thin films for electron transport control and signal sensing, including giant magnetoresistance, colossal magnetoresistance, tunneling magnetoresistance, and the quantum anomalous Holzer effect An in time summary of high-quality magneto-optics, nanophotonics, spin waves and spintronics using bismuth-substituted iron garnet thin films as examples A thorough discussion of template-assisted fabrication of nanostructure thin films for ultrasensitive detection of chemicals and biomolecules A treatment of biomass derived functional films and coatings Perfect for materials scientists and inorganic chemists, Inorganic and Organic Thin Films will also earn a place in the libraries of solid state physicists and physical chemists working in private industry, as well as polymer and surface chemists who seek to improve their understanding of thin films and coatings.

Download or read book Handbook of Nanocomposite Supercapacitor Materials I written by Kamal K. Kar and published by Springer Nature. This book was released on 2020-04-16 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers a comprehensive overview of the characteristics of several types of materials that are widely used in the current era of supercapacitors; namely, architectured carbon materials, transition metal oxides and conducting polymers. It provides readers with a complete introduction to the fundamentals of supercapacitors, including the development of new electrolytes and electrodes, while highlighting the advantages, challenges, applications and future of these materials. This book is part of the Handbook of Nanocomposite Supercapacitor Materials. Supercapacitors have emerged as promising devices for electrochemical energy storage, playing an important role in energy harvesting for meeting the current demands of increasing global energy consumption. The handbook covers the materials science and engineering of nanocomposite supercapacitors, ranging from their general characteristics and performance to materials selection, design and construction. Covering both fundamentals and recent developments, this handbook serves a readership encompassing students, professionals and researchers throughout academia and industry, particularly in the fields of materials chemistry, electrochemistry, and energy storage and conversion. It is ideal as a reference work and primary resource for any introductory senior-level undergraduate or beginning graduate course covering supercapacitors.

Download or read book Transparent Electronics written by Elvira Fortunato and published by . This book was released on with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Science A Field of Diverse Industrial Applications written by Arti Srivastava and published by Bentham Science Publishers. This book was released on 2023-07-05 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Science: A Field of Diverse Industrial Applications provides a comprehensive overview of recent developments in new materials and their applications across various fields. With ten chapters from reputed experts in materials chemistry, the book covers a wide range of topics including thin-film nanomaterials (including chalcogenide, zinc oxide and barium fluoride thin films), multiferroic nanoceramics, synthetic nanofibers, and polymer electrolytes. The content is divided into three sections, covering modified materials, functionalized nanomaterials, and the role of nanomaterials and modified materials in waste removal, chemical synthesis, and energy production. This book is an essential resource for researchers, scientists, and professionals in materials science, nanotechnology, and related fields who want to stay updated with recent advancements and their industrial applications. It also serves as a reference for advanced materials science courses.

Download or read book Nanomaterials Based Charge Trapping Memory Devices written by Ammar Nayfeh and published by Elsevier. This book was released on 2020-05-27 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rising consumer demand for low power consumption electronics has generated a need for scalable and reliable memory devices with low power consumption. At present, scaling memory devices and lowering their power consumption is becoming more difficult due to unresolved challenges, such as short channel effect, Drain Induced Barrier Lowering (DIBL), and sub-surface punch-through effect, all of which cause high leakage currents. As a result, the introduction of different memory architectures or materials is crucial. Nanomaterials-based Charge Trapping Memory Devices provides a detailed explanation of memory device operation and an in-depth analysis of the requirements of future scalable and low powered memory devices in terms of new materials properties. The book presents techniques to fabricate nanomaterials with the desired properties. Finally, the book highlights the effect of incorporating such nanomaterials in memory devices. This book is an important reference for materials scientists and engineers, who are looking to develop low-powered solutions to meet the growing demand for consumer electronic products and devices. Explores in depth memory device operation, requirements and challenges Presents fabrication methods and characterization results of new nanomaterials using techniques, including laser ablation of nanoparticles, ALD growth of nano-islands, and agglomeration-based technique of nanoparticles Demonstrates how nanomaterials affect the performance of memory devices

Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization

Download or read book Transparent Electronics written by Antonio Facchetti and published by John Wiley & Sons. This book was released on 2010-03-25 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge for producing “invisible” electronic circuitry and opto-electronic devices is that the transistor materials must be transparent to visible light yet have good carrier mobilities. This requires a special class of materials having “contra-indicated properties” because from the band structure point of view, the combination of transparency and conductivity is contradictory. Structured to strike a balance between introductory and advanced topics, this monograph juxtaposes fundamental science and technology / application issues, and essential materials characteristics versus device architecture and practical applications. The first section is devoted to fundamental materials compositions and their properties, including transparent conducting oxides, transparent oxide semiconductors, p-type wide-band-gap semiconductors, and single-wall carbon nanotubes. The second section deals with transparent electronic devices including thin-film transistors, photovoltaic cells, integrated electronic circuits, displays, sensors, solar cells, and electro-optic devices. Describing scientific fundamentals and recent breakthroughs such as the first “invisible” transistor, Transparent Electronics: From Synthesis to Applications brings together world renowned experts from both academia, national laboratories, and industry.

Download or read book Flash Lamp Annealing written by Lars Rebohle and published by Springer. This book was released on 2019-07-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive survey of the technology of flash lamp annealing (FLA) for thermal processing of semiconductors. It gives a detailed introduction to the FLA technology and its physical background. Advantages, drawbacks and process issues are addressed in detail and allow the reader to properly plan and perform their own thermal processing. Moreover, this books gives a broad overview of the applications of flash lamp annealing, including a comprehensive literature survey. Several case studies of simulated temperature profiles in real material systems give the reader the necessary insight into the underlying physics and simulations. This book is a valuable reference work for both novice and advanced users.

Download or read book Oxide Thin Film Transistors written by K. J. Saji and published by Nova Science Publishers. This book was released on 2017 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transparent flexible electronics is an emerging technology which makes use of wide band gap semiconductors that can be processed at low temperatures on glass or plastic substrates. Electronic systems that cover large area and curved surfaces together with transparency bring the possibility of numerous applications that are outside the scope of rigid wafer based electronics. Flexible electronics, electronic textiles, a wearable wellness system, and sensory skin are some of the applications of flexible electronics. The key factor in the realization of transparent electronics is the development of high performance fully transparent thin film transistors. Thin film transistors (TFTs) based on transparent conducting amorphous oxide semiconductors (TAOS) such as InGaZnO (IGZO), zinc tin oxide (ZTO), zinc indium tin oxide (ZITO), etc. provide additional functionalities like transparency, high field effect mobility and potential for room temperature processing. The performance of these TAOS based TFTs are superior to their silicon (a-Si:H TFTs) and organic TFTs.Though there are monographs and books on a-Si:H TFTs and organic TFTs, a book on TAOS based TFTs is rare. This book introduces the work of graduate students and beginners to the field of amorphous semiconductors. The mass production of this kind of TFTs on large area substrates involves the complications associated with controlling the composition of oxide compound semiconductor thin film material. Pulsed laser deposition allows for the growth of an oxide semiconductor in a very high oxygen rich environment while co-sputtering is an effective technique for the growth of a multicomponent film and to control the film chemical composition in a systematic and easy way. These manufacturing aspects will be of interest to those working in the industry. The review on the n channel, p channel TFTs, and the detailed description for the extraction of various TFT parameters like the threshold voltage, field effect mobility, sub threshold slope and on-off ratio, etc. will be ready for those working in the field of transparent electronics.

Download or read book Handbook of Flexible and Stretchable Electronics written by Muhammad M. Hussain and published by CRC Press. This book was released on 2019-11-11 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexibility and stretchability of electronics are crucial for next generation electronic devices that involve skin contact sensing and therapeutic actuation. This handbook provides a complete entrée to the field, from solid-state physics to materials chemistry, processing, devices, performance, and reliability testing, and integrated systems development. This work shows how microelectronics, signal processing, and wireless communications in the same circuitry are impacting electronics, healthcare, and energy applications. Key Features: • Covers the fundamentals to device applications, including solid-state and mechanics, chemistry, materials science, characterization techniques, and fabrication; • Offers a comprehensive base of knowledge for moving forward in this field, from foundational research to technology development; • Focuses on processing, characterization, and circuits and systems integration for device applications; • Addresses the basic physical properties and mechanics, as well as the nuts and bolts of reliability and performance analysis; • Discusses various technology applications, from printed electronics to logic and memory devices, sensors, actuators, displays, and energy storage and harvesting. This handbook will serve as the one-stop knowledge base for readership who are interested in flexible and stretchable electronics.

Download or read book Flexible Electronics Volume 2 Thin film Transistors written by Vinod Kumar Khanna and published by Institute of Physics Publishing. This book was released on 2019-07-18 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on thin-film transistors (TFTs) and their properties, as well as covering field effect transistors (FETs), including electrolyte-gated field-effect transistors such as EGOFETs and OECFETs.

Download or read book A New Generation of Organic Light Emitting Materials and Devices written by Shi-Jian Su and published by Frontiers Media SA. This book was released on 2019-11-27 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the invention of the first efficient organic light-emitting diodes (OLEDs) by C. T. Tang and S. VanSlyke, OLEDs have attracted close interest as a promising candidate for next-generation full-color displays and future solid-state lighting sources because of a number of advantages like high brightness and contrast, high luminous efficiency, fast response time, wide viewing angle, low power consumption, and light weight. The recombination of holes and electrons under electrical excitation typically generates 25% singlet excitons and 75% triplet excitons. For traditional fluorescent OLEDs, only 25% singlet excitons can be utilized to emit light, while the other 75% triplet excitons are generally wasted through nonradiative transition. By adopting noble metal phosphorescent complexes, an internal quantum efficiency (IQE) of 100% could be achieved by utilizing both the 25% singlet excitons and 75% triplet excitons. However, these phosphors usually contain nonrenewable and highcost iridium or platinum noble metals. Most recently, unity IQE has been readily achieved through noble metal-free purely organic emitters, such as thermally activated delayed fluorescence (TADF) emitters, hybridized local and charge-transfer state (HLCT) “hot exciton” emitters, binary- or ternary-mixed donor-acceptor exciplex emitters, and neutral p radical emitters, etc. In addition, the combination of conventional p-type hole-transport and n-type electron-transport materials in an appropriate device structure can also provide an uncommon efficiency. Both strategies are essential and attractive for high-performance and low-cost full-color displays and white OLED applications. This Research Topic mainly focus on this new generation of organic light-emitting materials and devices, including design, synthesis, and characterization of light-emitting organic molecules with tunable excited states, and their structural, electrical, and photophysical properties. Contributions relating to carrier transporting materials and corresponding device engineering are also included. Two mini reviews and thirteen original research articles by recognized academic experts in their respective fields are collected in this Research Topic, which will offer a broad perspective of noble metal-free organic light emitters, including conventional fluorescent emitters, TADF emitters, HLCT emitters, exciplex emitters, aggregation-induced emission (AIE) luminogens, and their corresponding devices. We believe this eBook should attract the attention of multidisciplinary researchers in the fields of materials science, organic synthesis, and electronic device engineering, especially for those engaged in OLED-related areas.

Download or read book Amorphous Oxide Semiconductors written by Hideo Hosono and published by John Wiley & Sons. This book was released on 2022-05-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: AMORPHOUS OXIDE SEMICONDUCTORS A singular resource on amorphous oxide semiconductors edited by a world-recognized pioneer in the field In Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory, the Editors deliver a comprehensive account of the current status of—and latest developments in—transparent oxide semiconductor technology. With contributions from leading international researchers and exponents in the field, this edited volume covers physical fundamentals, thin-film transistor applications, processing, circuits and device simulation, display and memory applications, and new materials relevant to amorphous oxide semiconductors. The book makes extensive use of structural diagrams of materials, energy level and energy band diagrams, device structure illustrations, and graphs of device transfer characteristics, photographs and micrographs to help illustrate the concepts discussed within. It also includes: A thorough introduction to amorphous oxide semiconductors, including discussions of commercial demand, common challenges faced during their manufacture, and materials design Comprehensive explorations of the electronic structure of amorphous oxide semiconductors, structural randomness, doping limits, and defects Practical discussions of amorphous oxide semiconductor processing, including oxide materials and interfaces for application and solution-process metal oxide semiconductors for flexible electronics In-depth examinations of thin film transistors (TFTs), including the trade-off relationship between mobility and reliability in oxide TFTs Perfect for practicing scientists, engineers, and device technologists working with transparent semiconductor systems, Amorphous Oxide Semiconductors: IGZO and Related Materials for Display and Memory will also earn a place in the libraries of students studying oxides and other non-classical and innovative semiconductor devices. WILEY SID Series in Display Technology Series Editor: Ian Sage, Abelian Services, Malvern, UK The Society for Information Display (SID) is an international society which has the aim of encouraging the development of all aspects of the field of information display. Complementary to the aims of the society, the Wiley-SID series is intended to explain the latest developments in information display technology at a professional level. The broad scope of the series addresses all facets of information displays from technical aspects through systems and prototypes to standards and ergonomics.