Download or read book Handbook of Zinc Oxide and Related Materials written by Zhe Chuan Feng and published by CRC Press. This book was released on 2012-09-26 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through their application in energy-efficient and environmentally friendly devices, zinc oxide (ZnO) and related classes of wide gap semiconductors, including GaN and SiC, are revolutionizing numerous areas, from lighting, energy conversion, photovoltaics, and communications to biotechnology, imaging, and medicine. With an emphasis on engineering a

Download or read book Comprehensive Nanoscience and Technology written by and published by Academic Press. This book was released on 2010-10-29 with total page 2785 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the Introduction: Nanotechnology and its underpinning sciences are progressing with unprecedented rapidity. With technical advances in a variety of nanoscale fabrication and manipulation technologies, the whole topical area is maturing into a vibrant field that is generating new scientific research and a burgeoning range of commercial applications, with an annual market already at the trillion dollar threshold. The means of fabricating and controlling matter on the nanoscale afford striking and unprecedented opportunities to exploit a variety of exotic phenomena such as quantum, nanophotonic and nanoelectromechanical effects. Moreover, researchers are elucidating new perspectives on the electronic and optical properties of matter because of the way that nanoscale materials bridge the disparate theories describing molecules and bulk matter. Surface phenomena also gain a greatly increased significance; even the well-known link between chemical reactivity and surface-to-volume ratio becomes a major determinant of physical properties, when it operates over nanoscale dimensions. Against this background, this comprehensive work is designed to address the need for a dynamic, authoritative and readily accessible source of information, capturing the full breadth of the subject. Its six volumes, covering a broad spectrum of disciplines including material sciences, chemistry, physics and life sciences, have been written and edited by an outstanding team of international experts. Addressing an extensive, cross-disciplinary audience, each chapter aims to cover key developments in a scholarly, readable and critical style, providing an indispensible first point of entry to the literature for scientists and technologists from interdisciplinary fields. The work focuses on the major classes of nanomaterials in terms of their synthesis, structure and applications, reviewing nanomaterials and their respective technologies in well-structured and comprehensive articles with extensive cross-references. It has been a constant surprise and delight to have found, amongst the rapidly escalating number who work in nanoscience and technology, so many highly esteemed authors willing to contribute. Sharing our anticipation of a major addition to the literature, they have also captured the excitement of the field itself in each carefully crafted chapter. Along with our painstaking and meticulous volume editors, full credit for the success of this enterprise must go to these individuals, together with our thanks for (largely) adhering to the given deadlines. Lastly, we record our sincere thanks and appreciation for the skills and professionalism of the numerous Elsevier staff who have been involved in this project, notably Fiona Geraghty, Megan Palmer and Greg Harris, and especially Donna De Weerd-Wilson who has steered it through from its inception. We have greatly enjoyed working with them all, as we have with each other.

Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.

Download or read book Handbook of Flexible and Stretchable Electronics written by Muhammad M. Hussain and published by CRC Press. This book was released on 2019-11-11 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexibility and stretchability of electronics are crucial for next generation electronic devices that involve skin contact sensing and therapeutic actuation. This handbook provides a complete entrée to the field, from solid-state physics to materials chemistry, processing, devices, performance, and reliability testing, and integrated systems development. This work shows how microelectronics, signal processing, and wireless communications in the same circuitry are impacting electronics, healthcare, and energy applications. Key Features: • Covers the fundamentals to device applications, including solid-state and mechanics, chemistry, materials science, characterization techniques, and fabrication; • Offers a comprehensive base of knowledge for moving forward in this field, from foundational research to technology development; • Focuses on processing, characterization, and circuits and systems integration for device applications; • Addresses the basic physical properties and mechanics, as well as the nuts and bolts of reliability and performance analysis; • Discusses various technology applications, from printed electronics to logic and memory devices, sensors, actuators, displays, and energy storage and harvesting. This handbook will serve as the one-stop knowledge base for readership who are interested in flexible and stretchable electronics.

Download or read book Piezotronics and Piezo Phototronics written by Zhong Lin Wang and published by Springer Nature. This book was released on 2023-07-24 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-authored by the discoverer of the piezotronic effect, this book is a fundamental and comprehensive survey of piezotronics and piezo-phototronics. Piezotronics is a term broadly applied to devices fabricated using the piezopotential as a “gate” voltage to tune/control charge carrier transport at a contact or junction. The piezo-phototronic effect describes the use of the piezopotential to control the carrier generation, transport, separation and/or recombination for improving the performance of optoelectronic devices. The book first introduces the theory of the piezotronic effect and its applications in transistors, sensors, and catalysis. Subsequent chapters comprehensively cover the fundamentals of the piezo-phototronic effect and its impacts on photon sensors, solar cells, and LEDs. The updated and significantly expanded second edition covers the most recent advances and breakthroughs in this field over the last decade — gas, chemical, and biological nanosensors; quantum dots, wells, and wires; piezocatalysis; the piezo-photonic effect; and the pyro-phototronic effect. This seminal book serves as a basic text for scientists and students in the field of piezotronic devices and third-generation semiconductors.

Download or read book State of the Art Program on Compound Semiconductors XXXIX and Nitride and Wide Bandgap Semiconductors for Sensors Photonics and Electronics IV written by R. F. Kopf and published by The Electrochemical Society. This book was released on 2003 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanochemistry written by Geoffrey A Ozin and published by Royal Society of Chemistry. This book was released on 2023-01-17 with total page 875 pages. Available in PDF, EPUB and Kindle. Book excerpt: International interest in nanoscience research has flourished in recent years, as it becomes an integral part in the development of future technologies. The diverse, interdisciplinary nature of nanoscience means effective communication between disciplines is pivotal in the successful utilization of the science. Nanochemistry: A Chemical Approach to Nanomaterials is the first textbook for teaching nanochemistry and adopts an interdisciplinary and comprehensive approach to the subject. It presents a basic chemical strategy for making nanomaterials and describes some of the principles of materials self-assembly over 'all' scales. It demonstrates how nanometre and micrometre scale building blocks (with a wide range of shapes, compositions and surface functionalities) can be coerced through chemistry to organize spontaneously into unprecedented structures, which can serve as tailored functional materials. Suggestions of new ways to tackle research problems and speculations on how to think about assembling the future of nanotechnology are given. Primarily designed for teaching, this book will appeal to graduate and advanced undergraduate students. It is well illustrated with graphical representations of the structure and form of nanomaterials and contains problem sets as well as other pedagogical features such as further reading, case studies and a comprehensive bibliography.

Download or read book Ferroelectric Gate Field Effect Transistor Memories written by Byung-Eun Park and published by Springer Nature. This book was released on 2020-03-23 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of the materials characteristics, process technologies, and device operations for memory field-effect transistors employing inorganic or organic ferroelectric thin films. This transistor-type ferroelectric memory has interesting fundamental device physics and potentially large industrial impact. Among various applications of ferroelectric thin films, the development of nonvolatile ferroelectric random access memory (FeRAM) has been most actively progressed since the late 1980s and reached modest mass production for specific application since 1995. There are two types of memory cells in ferroelectric nonvolatile memories. One is the capacitor-type FeRAM and the other is the field-effect transistor (FET)-type FeRAM. Although the FET-type FeRAM claims the ultimate scalability and nondestructive readout characteristics, the capacitor-type FeRAMs have been the main interest for the major semiconductor memory companies, because the ferroelectric FET has fatal handicaps of cross-talk for random accessibility and short retention time. This book aims to provide the readers with development history, technical issues, fabrication methodologies, and promising applications of FET-type ferroelectric memory devices, presenting a comprehensive review of past, present, and future technologies. The topics discussed will lead to further advances in large-area electronics implemented on glass, plastic or paper substrates as well as in conventional Si electronics. The book is composed of chapters written by leading researchers in ferroelectric materials and related device technologies, including oxide and organic ferroelectric thin films.

Download or read book ZnO Thin Film Transistors for Cost Efficient Flexible Electronics written by Fábio Fedrizzi Vidor and published by Springer. This book was released on 2017-12-28 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the integration, characterization and analysis of cost-efficient thin-film transistors (TFTs), applying zinc oxide as active semiconductors. The authors discuss soluble gate dielectrics, ZnO precursors, and dispersions containing nanostructures of the material, while different transistor configurations are analyzed with respect to their integration, compatibility, and device performance. Additionally, simple circuits (inverters and ring oscillators) and a complementary design employing (in)organic semiconducting materials are presented and discussed. Readers will benefit from concise information on cost-efficient materials and processes, applied in flexible and transparent electronic technology, such as the use of solution-based materials and dispersion containing nanostructures, as well as discussion of the physical fundamentals responsible for the operation of the thin-film transistors and the non-idealities of the device.

Download or read book Different Types of Field Effect Transistors written by Momčilo Pejović and published by BoD – Books on Demand. This book was released on 2017-06-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1959, Atalla and Kahng at Bell Labs produced the first successful field-effect transistor (FET), which had been long anticipated by other researchers by overcoming the "surface states" that blocked electric fields from penetrating into the semiconductor material. Very quickly, they became the fundamental basis of digital electronic circuits. Up to this point, there are more than 20 different types of field-effect transistors that are incorporated in various applications found in everyday's life. Based on this fact, this book was designed to overview some of the concepts regarding FETs that are currently used as well as some concepts that are still being developed.

Download or read book Nanomaterials for Sensing and Optoelectronic Applications written by M. K. Jayaraj and published by Elsevier. This book was released on 2022-06-13 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Sensing and Optoelectronic Applications explores recent trends in nanomaterials and devices for chemical and biosensing applications. The synthesis, properties and applications of metal oxide nanostructures, as well as two-dimensional layered materials are covered, along with the fabrication of optoelectronic devices, such as chemical sensors, biosensors, core-shell nanostructures-based surface-enhanced Raman spectroscopy (SERS) substrates, luminescent nanoparticles, memory devices, and thin film transistors. Aiming at researchers in these respective areas, the fundamental principles and mechanisms of the optoelectronic phenomena behind every application mentioned are covered and comprehensively explored. The book will be helpful in solving problems related to the synthesis and growth of various nanostructures, the application of these materials for various devices, and to understand how a specific synthesis route promotes a specific application. - Outlines the fundamental principles and mechanisms behind chemical sensing, bio-sensing, thin film transistor devices, and memory devices - Offers a detailed description on the synthesis of 2D materials and oxide nanostructures, with thin films included - Assesses the major properties of nanomaterials that make them good sensing agents

Download or read book Handbook of Nanophysics written by Klaus D. Sattler and published by CRC Press. This book was released on 2010-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many bottom-up and top-down techniques for nanomaterial and nanostructure generation have enabled the development of applications in nanoelectronics and nanophotonics. Handbook of Nanophysics: Nanoelectronics and Nanophotonics explores important recent applications of nanophysics in the areas of electronics and photonics. Each peer-reviewed c

Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.

Download or read book Numerical Simulations of Physical and Engineering Processes written by Jan Awrejcewicz and published by BoD – Books on Demand. This book was released on 2011-09-26 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Simulations of Physical and Engineering Process is an edited book divided into two parts. Part I devoted to Physical Processes contains 14 chapters, whereas Part II titled Engineering Processes has 13 contributions. The book handles the recent research devoted to numerical simulations of physical and engineering systems. It can be treated as a bridge linking various numerical approaches of two closely inter-related branches of science, i.e. physics and engineering. Since the numerical simulations play a key role in both theoretical and application oriented research, professional reference books are highly needed by pure research scientists, applied mathematicians, engineers as well post-graduate students. In other words, it is expected that the book will serve as an effective tool in training the mentioned groups of researchers and beyond.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Butterworth-Heinemann. This book was released on 2017-09-09 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fourth Edition, brings together over 100 years of combined experience in the specialist areas of power engineering to offer a fully revised and updated expert guide to total power solutions. Designed to provide the best technical and most commercially viable solutions available, this handbook undertakes any or all aspects of a project requiring specialist design, installation, commissioning and maintenance services. Comprising a complete revision throughout and enhanced chapters on semiconductor diodes and transistors and thyristors, this volume includes renewable resource content useful for the new generation of engineering professionals. This market leading reference has new chapters covering electric traction theory and motors and wide band gap (WBG) materials and devices. With this book in hand, engineers will be able to execute design, analysis and evaluation of assigned projects using sound engineering principles and adhering to the business policies and product/program requirements. - Includes a list of leading international academic and professional contributors - Offers practical concepts and developments for laboratory test plans - Includes new technical chapters on electric vehicle charging and traction theory and motors - Includes renewable resource content useful for the new generation of engineering professionals

Download or read book Nanosensors for Smart Manufacturing written by Sabu Thomas and published by Elsevier. This book was released on 2021-06-10 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanosensors for Smart Manufacturing provides information on the fundamental design concepts and emerging applications of nanosensors in smart manufacturing processes. In smart production, if the products and machines are integrated, embedded, or equipped with sensors, the system can immediately collect the current operating parameters, predict the product quality, and then feed back the optimal parameters to machines in the production line. In this regard, smart sensors and their wireless networks are important components of smart manufacturing. Nanomaterials-based sensors (nanosensors) offer several advantages over their microscale counterparts, including lower power consumption, fast response time, high sensitivity, lower concentration of analytes, and smaller interaction distance between sensors and products. With the support of artificial intelligence (AI) tools such as fuzzy logic, genetic algorithms, neural networks, and ambient intelligence, sensor systems have become smarter. This is an important reference source for materials scientists and engineers who want to learn more about how nanoscale sensors can enhance smart manufacturing techniques and processes. - Outlines the smart nanosensor classes used in manufacturing applications - Shows how nanosensors are being used to make more efficient manufacturing systems - Assesses the major obstacles to designing nanosensor-based manufacturing systems at an industrial scale

Download or read book World Scientific Encyclopedia Of Nanomedicine And Bioengineering I The Nanotechnology For Translational Medicine Tissue Engineering Biological Sensing Medical Imaging And Therapeutics A 4 volume Set written by and published by World Scientific. This book was released on 2016-08-30 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-part multivolume set provides a comprehensive overview of current achievements in biomedical applications of nanotechnology, including stem cell based regenerative medicine, medical imaging, cell targeting, drug delivery, and photothermal/photodynamic cancer therapy. New approaches in early cancer diagnosis and treatment are introduced with extensive experimental results. In particular, some novel materials have been synthesized with new properties that are most effective in cancer therapy. Some of the key issues are also addressed with these recent discoveries such as bio safety and bio degradability, that are essential in the success of nano medicine.An important aspect of this book set is the introduction of nanotechnology to the medical communities that are searching for new treatments of cancer. It may also break the barriers between the physical and medical sciences so that more MDs will be able to appreciate the new discoveries and establishments in medical diagnosis and therapy that will allow the effective handling of major clinical issues.This major reference publication will be important as the field of nanomedicine has been rapidly developing with a great deal of new information. It is anticipated that the research will soon advance into the pre-clinical stage. Therefore, this reference set can serve as valuable background information for future clinical studies.