Download or read book ZnO and Their Hybrid Nano Structures written by Gaurav Sharma and published by Materials Research Forum LLC. This book was released on 2023-06-05 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: ZnO and its hybrid nanostructures have unique optical, physical and chemical properties. The book covers recent trends in processing techniques and applications. Topics include solar cells, photo-voltaic devices, fuel cells, uv filters, lasers, light-emitting diodes, photo-detectors, spin-tronic devices, magnetic semiconductors, nano-generators, piezotronics, photo-catalytic applications against harmful organic pollutants like dyes, heavy metals, antibiotics, and sensors such as bio sensors, chemical sensors, gas sensors. Keywords: ZnO, Nano ZnO, Point Defects, Magnetic Semiconductors, Hybrid Nanostructures, Cell Applications, Nanoadsorbant for Heavy Metal Removals, Diagnostics, ZnO Nano-Carriers, ZnO Thin Films Fabrication.
Download or read book Zinc Oxide Nanostructures written by Magnus Willander and published by CRC Press. This book was released on 2014-07-22 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zinc oxide (ZnO) in its nanostructured form is emerging as a promising material with great potential for the development of many smart electronic devices. This book presents up-to-date information about various synthesis methods to obtain device-quality ZnO nanostructures. It describes both high-temperature (over 100° C) and low-temperature (under 100° C) approaches to synthesizing ZnO nanostructures; device applications for technical and medical devices, light-emitting diodes, electrochemical sensors, nanogenerators, and photodynamic therapy; and the concept of self-powered devices and systems using ZnO nanostructures. The book emphasizes the utilization of non-conventional substrates such as plastic, paper, and textile as new platforms for developing electronics.
Download or read book ZnO Nanostructures and Their Applications written by Sun Xiaowei and published by CRC Press. This book was released on 2016-04-19 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the various functional properties and potential applications of one-dimensional ZnO nanostructures, from basic principles to our most recent discoveries. It comprises experimental analysis of various properties of ZnO nanostructures, preparation techniques, research methods, and some promising applications. The areas of focus i
Download or read book ZnO Nanostructures for Tissue Regeneration Drug Delivery and Theranostics Applications written by Valentina Cauda and published by MDPI. This book was released on 2021-03-25 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured zinc oxide materials are capturing a great deal of interest thanks to their outstanding and multifunctional properties, enabling broad series of intervention in the field of nanomedicine. ZnO can be easily prepared in a broad variety of shapes and shows anticancer and antimicrobial properties that are of interest for tissue engineering, controlled delivery of therapeutics, and even theranostics. This book is thus dedicated to the most recent advances in the field, presented as a collection of research papers and reviews. It spans from the synthesis and characterization of ZnO nanomaterials to their applications in the nanomedicine field, ranging from anticancer nanotherapeutics to dental implants and antibacterial agents.
Download or read book Nanostructured Zinc Oxide written by Kamlendra Awasthi and published by Elsevier. This book was released on 2021-08-10 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Zinc Oxide covers the various routes for the synthesis of different types of nanostructured zinc oxide including; 1D (nanorods, nanowires etc.), 2D and 3D (nanosheets, nanoparticles, nanospheres etc.). This comprehensive overview provides readers with a clear understanding of the various parameters controlling morphologies. The book also reviews key properties of ZnO including optical, electronic, thermal, piezoelectric and surface properties and techniques in order to tailor key properties. There is a large emphasis in the book on ZnO nanostructures and their role in optoelectronics. ZnO is very interesting and widely investigated material for a number of applications. This book presents up-to-date information about the ZnO nanostructures-based applications such as gas sensing, pH sensing, photocatalysis, antibacterial activity, drug delivery, and electrodes for optoelectronics. - Reviews methods to synthesize, tailor, and characterize 1D, 2D, and 3D zinc oxide nanostructured materials - Discusses key properties of zinc oxide nanostructured materials including optical, electronic, thermal, piezoelectric, and surface properties - Addresses most relevant zinc oxide applications in optoelectronics such as light-emitting diodes, solar cells, and sensors
Download or read book ZnO Nanostructures written by Yue Zhang and published by Royal Society of Chemistry. This book was released on 2017-06-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: As wide band semiconductors with rich morphologies and interesting electric, optical, mechanical and piezoelectric properties, ZnO nanostructures have great potential in applications, such as strain sensors, UV detectors, blue LED, nano generators, and biosensors. ZnO Nanostructures: Fabrication and Applications covers the controllable synthesis and property optimization of ZnO nanostructures through to the preparation and performance of nanodevices for various applications. The book also includes recent progress in property modulation of ZnO nanomaterials and new types of devices as well as the latest research on self-powered devices and performance modulation of ZnO nanodevices by multi-field coupled effects. Authored by a leading researcher working within the field, this volume is applicable for those working in nanostructure fabrication and device application in industry and academia and is appropriate from advanced undergraduate level upwards.
Download or read book Zinc Oxide Nanostructures Synthesis and Characterization written by Sotirios Baskoutas and published by MDPI. This book was released on 2018-12-04 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Zinc Oxide Nanostructures: Synthesis and Characterization" that was published in Materials
Download or read book ZnO and TiO2 Based Nanostructures written by Andrea Lamberti and published by MDPI. This book was released on 2018-10-15 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "ZnO and TiO2 Based Nanostructures" that was published in Nanomaterials
Download or read book Zinc Oxide written by Hadis Morkoç and published by John Wiley & Sons. This book was released on 2008-12-03 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic, authoritative and thorough treatment in one comprehensive volume presents the fundamentals and technologies of the topic, elucidating all aspects of ZnO materials and devices. Following an introduction, the authors look at the general properties of ZnO, as well as its growth, optical processes, doping and ZnO-based dilute magnetic semiconductors. Concluding sections treat bandgap engineering, processing and ZnO nanostructures and nanodevices. Of interest to device engineers, physicists, and semiconductor and solid state scientists in general.
Download or read book Zinc Oxide Based Nano Materials and Devices written by , Prof. Dr. Ahmed Nahhas and published by BoD – Books on Demand. This book was released on 2019-10-09 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a review of recent advances in ZnO-based nanomaterials and devices. ZnO as a nanomaterial has gained substantial interest in the research area of wide bandgap semiconductors and is considered to be one of the major candidates for electronic and photonic applications. ZnO has distinguished and interesting electrical and optical properties and is considered to be a potential material in optoelectronic applications such as solar cells, surface acoustic wave devices, and UV emitters. ZnO's unique properties have attracted several researchers to study its electrical and optical properties. As a nanostructured material, ZnO exhibits many advantages for nanodevices. Moreover, it has the ability to absorb the UV radiation.
Download or read book ZnO Nanostructures written by Dana Crawford and published by . This book was released on 2020-01-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Different ZnO nanostructures are attributed to different electronic properties which are favourable in the application of photocatalysis, sensing and energy harvesting. The non toxic behaviour of ZnO nanostructures lead to the use of this material in environmental sensing and environmental remediation. In ZnO Nanostructures: Advances in Research and Applications, a large-scale synthesis of undoped low-dimensional semiconductor metal oxide nanostructures is performed by simple wet-chemical method using reducing agents at low temperature. The detailed structural, compositional, and optical characterizations of the ZnO nanoparticles were evaluated by powder X-ray diffraction pattern, Fourier-transform infra-red spectroscopy, X-ray photoelectron spectroscopy, electron dispersion spectroscopy and UV-vis. Spectroscopy. Following this, the authors describe the structure electrochemical sensors, listing scientific papers focusing on the detection of different pathogens and analytes, as well as reporting and comparing the performance of the sensors prepared by various groups around the world. The concluding chapter deals with synthesis protocols of ZnO heterostructures along with their role in optoelectronic applications. Their thermodynamic stability and correlation among morphology, defects, and heterostructure with luminating and catalytic properties is also described"--
Download or read book Toward the Optimization of Low temperature Solution based Synthesis of ZnO Nanostructures for Device Applications written by Hatim Alnoor and published by Linköping University Electronic Press. This book was released on 2017-10-06 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-dimensional (1D) nanostructures (NSs) of Zinc Oxide (ZnO) such as nanorods (NRs) have recently attracted considerable research attention due to their potential for the development of optoelectronic devices such as ultraviolet (UV) photodetectors and light-emitting diodes (LEDs). The potential of ZnO NRs in all these applications, however, would require synthesis of high crystal quality ZnO NRs with precise control over the optical and electronic properties. It is known that the optical and electronic properties of ZnO NRs are mostly influenced by the presence of native (intrinsic) and impurities (extrinsic) defects. Therefore, understanding the nature of these intrinsic and extrinsic defects and their spatial distribution is critical for optimizing the optical and electronic properties of ZnO NRs. However, identifying the origin of such defects is a complicated matter, especially for NSs, where the information on anisotropy is usually lost due to the lack of coherent orientation. Thus, the aim of this thesis is towards the optimization of the lowtemperature solution-based synthesis of ZnO NRs for device applications. In this connection, we first started with investigating the effect of the precursor solution stirring durations on the deep level defects concentration and their spatial distribution along the ZnO NRs. Then, by choosing the optimal stirring time, we studied the influence of ZnO seeding layer precursor’s types, and its molar ratios on the density of interface defects. The findings of these investigations were used to demonstrate ZnO NRs-based heterojunction LEDs. The ability to tune the point defects along the NRs enabled us further to incorporate cobalt (Co) ions into the ZnO NRs crystal lattice, where these ions could occupy the vacancies or interstitial defects through substitutional or interstitial doping. Following this, high crystal quality vertically welloriented ZnO NRs have been demonstrated by incorporating a small amount of Co into the ZnO crystal lattice. Finally, the influence of Co ions incorporation on the reduction of core-defects (CDs) in ZnO NRs was systematically examined using electron paramagnetic resonance (EPR).
Download or read book Zinc Oxide Bulk Thin Films and Nanostructures written by Chennupati Jagadish and published by Elsevier. This book was released on 2011-10-10 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an in-depth exploration of the following topics, this book covers the broad uses of zinc oxide within the fields of materials science and engineering:- Recent advances in bulk , thin film and nanowire growth of ZnO (including MBE, MOCVD and PLD), - The characterization of the resulting material (including the related ternary systems ZgMgO and ZnCdO), - Improvements in device processing modules (including ion implantation for doping and isolation ,Ohmic and Schottky contacts , wet and dry etching), - The role of impurities and defects on materials properties - Applications of ZnO in UV light emitters/detectors, gas, biological and chemical-sensing, transparent electronics, spintronics and thin film
Download or read book Handbook of Zinc Oxide and Related Materials written by Zhe Chuan Feng and published by CRC Press. This book was released on 2012-09-26 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through their application in energy-efficient and environmentally friendly devices, zinc oxide (ZnO) and related classes of wide gap semiconductors, including GaN and SiC, are revolutionizing numerous areas, from lighting, energy conversion, photovoltaics, and communications to biotechnology, imaging, and medicine. With an emphasis on engineering and materials science, Handbook of Zinc Oxide and Related Materials provides a comprehensive, up-to-date review of various technological aspects of ZnO. Volume Two focuses on devices and nanostructures created from ZnO and similar materials. The book covers various nanostructures, synthesis/creation strategies, device behavior, and state-of-the-art applications in electronics and optoelectronics. It also provides useful information on the device and nanoscale process and examines the fabrication of LEDs, LDs, photodetectors, and nanodevices. Covering key properties and important technologies of ZnO-based devices and nanoengineering, the handbook highlights the potential of this wide gap semiconductor. It also illustrates the remaining challenging issues in nanomaterial preparation and device fabrication for R&D in the twenty-first century.
Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. - Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices - Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures - Provides an in-depth overview of novel applications, including chromogenics, electronics and energy
Download or read book Nanostructured Materials written by Mohindar Seehra and published by BoD – Books on Demand. This book was released on 2017-07-12 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: There continues to be a worldwide interest in the size-dependent properties of nanostructured materials and their applications in many diverse fields such as catalysis, sensors, energy conversion processes, and biomedicine to name a few. The eleven chapters of this book written by different researchers include four chapters on the different methods of fabrication of specific materials followed by characterization of their properties, and the remaining seven chapters focusing on the fabrications and applications including three chapters on biomedical applications, two chapters on sensors, one chapter on solar cells, and one chapter on the use of nanoparticles in herbicides. These chapters provide up-to-date reviews useful for current and future researchers in these specific areas.
Download or read book ZnO Nanocarbon Core Shell Type Hybrid Quantum Dots written by Won Kook Choi and published by Springer. This book was released on 2016-08-20 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of ZnO-nano carbon core shell hybrid issues. There is significant interest in metal oxide/nanocarbon hybrid functional materials in the field of energy conversion and storage as electrode materials for supercapacitors, Li ion secondary battery, electrocatalysts for water splitting, and optoelectronic devices such as light emitting diodes and solar photovoltaic cells. Despite efforts to manipulate more uniform metal oxide-nanocarbon nanocomposite structures, they have shown poor performance because they are randomly scattered and non-uniformly attached to the nanocarbon surface. For higher and more effective performance of the hybrid structure, 3D conformal coating on metal oxides are highly desirable. In the first part of the book, the physical and chemical properties of ZnO and nanocarbons and the state-of-the-art in related research are briefly summarized. In the next part, the 3D conformal coating synthetic processes of ZnO templated nanocarbon hybrid materials such as ZnO-graphene,-C60, single-walled (SWCNT) are introduced with the aid of schematic illustrations. Analysis of their chemical bonding and structure are also presented. In the final section, several applications are presented: UV photovoltaic cells and photoelectrochemical anodes for water splitting using ZnO-C60 and ZnO-graphene, white-light-emitting diodes based on ZnO-graphene quantum dots(GQDs), inverted solar cells using ligand-modified ZnO-graphene QDs, and P(VDF-TrFE) copolymer with mixed with nano-ring SWCNT. The book describes how strong anchoring bonds between a ZnO core and carbon nanomaterial shell will ultimately prevail over the main drawbacks of ZnO with high charge recombination and poor electrochemical stability in liquid solutions. Due to the moderate energy states and excellent electric properties of the nanocarbons, ultrafast charge carrier transport from the ZnO core to the nanocarbon shell is guaranteed with the use of the photoluminescence (PL) lifetime measurement. Given the growing interest and significance of future research in optoelectronic and electrochemical devices applications, the contents are very timely. This book is targeted towards researchers looking for highly efficient metal oxide-nanocarbon hybrid functional materials in the fields of nano-optoelectronics, photoelectrochemistry, energy storage and conversion.
