Download or read book YS T 231 2015 Translated English of Chinese Standard YST 231 2015 YS T231 2015 YST231 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-06-03 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marks, package, transportation, storage, quality certificate and orders (or contracts) for the tungsten concentrate. This Standard applies to tungsten concentrate products selected in mine; it can be used for producing ammonium paratungstate, tungstic acid, ammonium metatungstate, tungsten oxide etc.

Download or read book YS T 298 2015 Translated English of Chinese Standard YST 298 2015 YS T298 2015 YST298 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, ordering list (or contract) contents of the high titanium slag. This Standard is applicable to the high titanium slag used by titanium tetrachloride, artificial rutile and titanium pigment with titanic iron ore as raw materials, and producing by electric furnace smelting.

Download or read book YS T 1028 4 2015 Translated English of Chinese Standard YS T 1028 4 2015 YST1028 4 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-10 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of YS/T 1028 specifies the method for determining the carbon content in lithium iron phosphate. This part applies to the determination of carbon content in lithium iron phosphate. Measuring range: 0.5%~5.0%. 2 Method summary The sample and flux are put into a porcelain crucible and heated with a high-frequency induction furnace in the oxygen flow. The carbon is burned to generate carbon dioxide, which is carried by the oxygen to the infrared absorption cell. The change of carbon dioxide concentration on infrared absorption energy follows Beer's law. The analysis results of carbon content are directly displayed on the display as a percentage. 3 Reagents and materials 3.1 Oxygen: The purity is not less than 99.5%. 3.2 Desiccant: Anhydrous magnesium perchlorate with a particle size of 0.7 mm~1.2 mm. 3.3 Purifying agent: Soda asbestos with a particle size of 0.7 mm~1.2 mm. 3.4 Pure iron: The purity is greater than 99.8%, and the carbon content is less than 0.002%. 3.5 Tungsten particles: The carbon content is less than 0.002%. 3.6 Porcelain crucible: Before use, the porcelain crucible shall be placed in a muffle furnace and burned at 1200 ¡ãC for no less than 2 hours. After it is taken out and cooled slightly, it is stored in a desiccator. YS/T 1028.4-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery Page 5 of 7 4 Instruments The operating parameters of the instruments shall meet the following requirements: -- High-frequency induction furnace: It shall meet the requirements of the sample melting temperature. -- Electronic balance: The sensitivity shall be 0.1 mg. 5 Samples 5.1 Before use, the sample shall be dried in an oven at 110 ¡ãC¡À5 ¡ãC for 1 hour, then taken out and stored in a desiccator. 5.2 The particle size of the sample shall not be larger than 0.10 mm. 6 Analysis steps WARNING -- The hazards associated with combustion analysis are primarily pre-fired porcelain crucibles and combustion during the melting process. Always use crucible tong...

Download or read book YS T 656 2015 Translated English of Chinese Standard YST 656 2015 YS T656 2015 YST656 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-05-05 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the designation, chemical composition etc. of niobium and niobium alloy. This Standard applies to all types of wrought niobium and niobium alloy products (including cast ingots and semi-finished products).

Download or read book YS T 357 2015 Translated English of Chinese Standard YS T 357 2015 YST357 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-10-16 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the requirements, test methods, inspection rules and marking, packaging, transportation, storage, quality certificate and order form (or contract) content of O-Isopropyl-N-ethyl thionocarbamate. This standard applies to O-Isopropyl-N-ethyl thionocarbamate flotation reagents, which are synthesized from isopropyl xanthate, monochloroacetic acid, sodium carbonate, monoethylamine as raw materials.

Download or read book YS T 1085 2015 Translated English of Chinese Standard YS T 1085 2015 YST1085 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-06-02 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the method for the determination of silicon, manganese, phosphorus, iron, copper, cobalt, magnesium, aluminum, zinc and chromium content in refined nickel by using an inductively coupled plasma atomic emission spectrometric method. This method is applicable to the analysis of silicon, manganese, phosphorus, iron, copper, cobalt, magnesium, aluminum, zinc and chromium content in refined nickel. The measuring range of each element is shown in Table 1. Table 1 -- Measuring range of each element Element Measuring range (mass fraction)/% YS/T 1085-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery Page 5 of 16 2 Method principle A certain amount of the sample is weighed and decomposed by the nitric acid; an inductively coupled plasma atomic emission spectrometer is used to measure the spectral intensity of the spectral line of the element to be measured in the solution; the spectral line is corrected by subtracting the background to eliminate the influence of the matrix nickel; the elemental content is obtained from the calibration curve drawn according to the standard solution. 3 Reagents Unless otherwise stated, the reagents used in this standard are all of analytical grade, and the water used is first-grade water. 3.1 Nitric acid (¦Ñ=1.42 g/mL). 3.2 Nitric acid (1+1). 3.3 Hydrofluoric acid (¦Ñ=1.15 g/mL). 3.4 Silicon standard stock solution: Heat high-purity silica (the content is greater than 99.9%) at a temperature of 1100 ¡ãC until its mass is constant, and cool to room temperature in a desiccator; weigh 2.1393 g and put it into a platinum crucible, add about 5 g of sodium carbonate, heat and melt for 15 minutes. Take it out and cool it slightly, place it in a 500 mL beaker, dissolve the melt with water, and wash out the platinum crucible; then, transfer the solution into a 1000 mL volumetric flask, wash the beaker with water and pour the washing liquid into the volumetric flask, add water to the scale of the volumetric flask, mix...

Download or read book YS T 1028 1 2015 Translated English of Chinese Standard YS T 1028 1 2015 YST1028 1 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-08-14 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of YS/T 1028 specifies the method for the determination of total iron in lithium iron phosphate. This section applies to the determination of total iron in lithium iron phosphate. The measuring range is: 28% ~ 36%. 2 Summary of method After the sample is dissolved in hydrochloric acid, sodium tungstate is used as an indicator; a small amount of ferric iron is reduced to ferrous iron with titanium trichloride, to form "tungsten blue"; the excess trivalent titanium is naturally oxidized by the oxygen in the air. In the sulfuric acid-phosphoric acid medium, sodium diphenylamine sulfonate is used as an indicator, to titrate the divalent iron by the use of potassium dichromate standard solution. 3 Reagents and materials 3.1 Hydrochloric acid (1 + 1). 3.2 Sulfuric acid-phosphoric acid mixed solution: Slowly add 15 mL of sulfuric acid (¦Ñ¡Ö 1.84 g/mL) to 70 mL of water. After cooling, add 15 mL of phosphoric acid (¦Ñ¡Ö1.69 g/mL). Mix well. 3.3 Titanium trichloride solution (1 + 14): Take 2 mL of titanium trichloride solution (about 15% titanium trichloride solution). Use hydrochloric acid (1 + 5), to dilute it to 30 mL. 3.4 Potassium dichromate standard titration solution [c( ) = 0.0500 mol/L]: Weigh 2.4516 g of standard potassium dichromate (after predried at 140 ¡ãC ~ 150 ¡ãC for 2 h, place it in a desiccator and cool to room temperature). After dissolving in wat

Download or read book GB T 31922 2015 Translated English of Chinese Standard GBT 31922 2015 GB T31922 2015 GBT31922 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-09-02 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification and code, ordering information, dimension, shape, weight, allowable deviation, technical requirements, test methods, inspection rules, packaging, marks and quality certificate of the hotrolled steel sheets and strips of higher yield strength with improved formability.

Download or read book GB T 8890 2015 Translated English of Chinese Standard GBT 8890 2015 GB T8890 2015 GBT8890 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2017-04-02 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, package, transportation, storage, order sheet (or contract), and the like contents of seamless copper alloy tube for condenser and heat-exchanger. This Standard is applicable to the seamless copper alloy tubes used by thermal power generation, ship, offshore oil, machinery, chemical and other industrial sectors to manufacture heat-exchanger and condenser.

Download or read book GB T 31931 2015 Translated English of Chinese Standard GBT 31931 2015 GB T31931 2015 GBT31931 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies using Diphenylcarbazide Spectrophotometric Method to determine the hexavalent chromium content.

Download or read book TB T 3094 2015 Translated English of Chinese Standard TBT 3094 2015 TB T3094 2015 TBT3094 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-02-11 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, working conditions, main characteristics, technical requirements, test, inspection results, marking, packaging, transportation and storage of vestibule diaphragm of locomotive and rolling stock.

Download or read book GB T 31961 2015 Translated English of Chinese Standard GBT 31961 2015 GB T31961 2015 GBT31961 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-11-02 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the specification, contour, and size of the rims matching the truck and bus wheel and tyres.

Download or read book GB T 2449 2 2015 Translated English of Chinese Standard GBT 2449 2 2015 GB T2449 2 2015 GBT2449 2 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-09-02 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part of the GB/T 2449 specifies the requirements, sampling, test methods, inspection rules, marks, packaging, transportation, storage and safety of the liquid sulphur for industrial use. This Part is applicable to the liquid sulphur for industrial use produced from recycled petroleum refinery gas and natural gas. For the liquid sulphur for industrial use produced by using other processes, this Part may also be referred to for implementation.

Download or read book YS T 1028 5 2015 Translated English of Chinese Standard YS T 1028 5 2015 YST1028 5 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-10 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of YS/T 1028 specifies the determination method of the content of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt and manganese in lithium iron phosphate. This part applies to the determination of the content of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt and manganese in lithium iron phosphate. The measurement range is shown in Table 1. Table 1 -- Measuring range of each element 2 Method summary The sample is dissolved with hydrochloric acid, the carbon in it is filtered out, and the element to be measured is measured by using an inductively coupled plasma atomic emission spectrometer. 3 Reagents 3.1 Hydrochloric acid (guaranteed reagent, ¦Ñ¡Ö1.19 g/mL). Element Element Measuring range w / % Measuring range w / % YS/T 1028.5-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery Page 5 of 9 3.2 Hydrochloric acid (1+1). 3.3 Hydrochloric acid (1+19). 3.4 Calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt, manganese standard stock solutions (1000 ¦Ìg/mL). 3.5 Mix standard solutions: Respectively pipette 5 mL of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt, and manganese standard stock solutions (3.4) into a 100 mL volumetric flask, dilute with hydrochloric acid (3.3) to the mark, and mix well. 1 mL of this solution contains 50 ¦Ìg of calcium, magnesium, zinc, copper, lead, chromium, sodium, aluminium, nickel, cobalt, and manganese. 4 Instruments Inductively coupled plasma atomic emission spectrometer. Under the best working conditions of the instrument, any instrument that can achieve the following indexes can be used: -- Ligh

Download or read book TB T 3395 1 2015 Translated English of Chinese Standard TB T 3395 1 2015 TBT3395 1 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-09-27 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Part specifies the technical requirements for high-speed railway fasteners AND main performance requirements of parts and components. This Part applies to fasteners of high-speed railway's ballasted track and non-ballasted track.

Download or read book YB T 5343 2015 Translated English of Chinese Standard YBT 5343 2015 YB T5343 2015 YBT5343 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-04-18 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the classification, dimension, shape, and tolerance, technical requirements, inspection and test methods, packaging, marking and quality certificate of steel wires for ropes.

Download or read book YBB 00162003 2015 Translated English of Chinese Standard YBB00162003 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-05-05 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard applies to the test for the stress of medicinal glass containers. Usually, glass is an isotropic homogeneous material. When there is stress, it will show anisotropy and produce light birefringence. This Standard specifies the test of using a polarized light stress meter to measure the optical path difference of birefringence, and using the numerical value of the optical path difference of unit thickness to express the magnitude of stress of product.