Download or read book YS T 1085 2015 Translated English of Chinese Standard YS T 1085 2015 YST1085 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2024-06-02 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: This standard specifies the method for the determination of silicon, manganese, phosphorus, iron, copper, cobalt, magnesium, aluminum, zinc and chromium content in refined nickel by using an inductively coupled plasma atomic emission spectrometric method. This method is applicable to the analysis of silicon, manganese, phosphorus, iron, copper, cobalt, magnesium, aluminum, zinc and chromium content in refined nickel. The measuring range of each element is shown in Table 1. Table 1 -- Measuring range of each element Element Measuring range (mass fraction)/% YS/T 1085-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery Page 5 of 16 2 Method principle A certain amount of the sample is weighed and decomposed by the nitric acid; an inductively coupled plasma atomic emission spectrometer is used to measure the spectral intensity of the spectral line of the element to be measured in the solution; the spectral line is corrected by subtracting the background to eliminate the influence of the matrix nickel; the elemental content is obtained from the calibration curve drawn according to the standard solution. 3 Reagents Unless otherwise stated, the reagents used in this standard are all of analytical grade, and the water used is first-grade water. 3.1 Nitric acid (¦Ñ=1.42 g/mL). 3.2 Nitric acid (1+1). 3.3 Hydrofluoric acid (¦Ñ=1.15 g/mL). 3.4 Silicon standard stock solution: Heat high-purity silica (the content is greater than 99.9%) at a temperature of 1100 ¡ãC until its mass is constant, and cool to room temperature in a desiccator; weigh 2.1393 g and put it into a platinum crucible, add about 5 g of sodium carbonate, heat and melt for 15 minutes. Take it out and cool it slightly, place it in a 500 mL beaker, dissolve the melt with water, and wash out the platinum crucible; then, transfer the solution into a 1000 mL volumetric flask, wash the beaker with water and pour the washing liquid into the volumetric flask, add water to the scale of the volumetric flask, mix...

Download or read book YS T 656 2015 Translated English of Chinese Standard YST 656 2015 YS T656 2015 YST656 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2018-05-05 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the designation, chemical composition etc. of niobium and niobium alloy. This Standard applies to all types of wrought niobium and niobium alloy products (including cast ingots and semi-finished products).

Download or read book YS T 231 2015 Translated English of Chinese Standard YST 231 2015 YS T231 2015 YST231 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-06-03 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marks, package, transportation, storage, quality certificate and orders (or contracts) for the tungsten concentrate. This Standard applies to tungsten concentrate products selected in mine; it can be used for producing ammonium paratungstate, tungstic acid, ammonium metatungstate, tungsten oxide etc.

Download or read book YS T 298 2015 Translated English of Chinese Standard YST 298 2015 YS T298 2015 YST298 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2019-03-16 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the requirements, test methods, inspection rules, marking, package, transportation, storage, quality certificate, ordering list (or contract) contents of the high titanium slag. This Standard is applicable to the high titanium slag used by titanium tetrachloride, artificial rutile and titanium pigment with titanic iron ore as raw materials, and producing by electric furnace smelting.

Download or read book YS T 1028 4 2015 Translated English of Chinese Standard YS T 1028 4 2015 YST1028 4 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2023-12-10 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: This part of YS/T 1028 specifies the method for determining the carbon content in lithium iron phosphate. This part applies to the determination of carbon content in lithium iron phosphate. Measuring range: 0.5%~5.0%. 2 Method summary The sample and flux are put into a porcelain crucible and heated with a high-frequency induction furnace in the oxygen flow. The carbon is burned to generate carbon dioxide, which is carried by the oxygen to the infrared absorption cell. The change of carbon dioxide concentration on infrared absorption energy follows Beer's law. The analysis results of carbon content are directly displayed on the display as a percentage. 3 Reagents and materials 3.1 Oxygen: The purity is not less than 99.5%. 3.2 Desiccant: Anhydrous magnesium perchlorate with a particle size of 0.7 mm~1.2 mm. 3.3 Purifying agent: Soda asbestos with a particle size of 0.7 mm~1.2 mm. 3.4 Pure iron: The purity is greater than 99.8%, and the carbon content is less than 0.002%. 3.5 Tungsten particles: The carbon content is less than 0.002%. 3.6 Porcelain crucible: Before use, the porcelain crucible shall be placed in a muffle furnace and burned at 1200 ¡ãC for no less than 2 hours. After it is taken out and cooled slightly, it is stored in a desiccator. YS/T 1028.4-2015 www.ChineseStandard.net ? Buy True-PDF ? Auto-delivery Page 5 of 7 4 Instruments The operating parameters of the instruments shall meet the following requirements: -- High-frequency induction furnace: It shall meet the requirements of the sample melting temperature. -- Electronic balance: The sensitivity shall be 0.1 mg. 5 Samples 5.1 Before use, the sample shall be dried in an oven at 110 ¡ãC¡À5 ¡ãC for 1 hour, then taken out and stored in a desiccator. 5.2 The particle size of the sample shall not be larger than 0.10 mm. 6 Analysis steps WARNING -- The hazards associated with combustion analysis are primarily pre-fired porcelain crucibles and combustion during the melting process. Always use crucible tong...

Download or read book GB T 32285 2015 Translated English of Chinese Standard GBT 32285 2015 GB T32285 2015 GBT32285 2015 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-12-07 with total page 19 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the order content, classification and designation system, dimensions, shapes, weights and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of hot-rolled steel H piles.