Download or read book Yield Point Phenomena in Metals and Alloys written by E. Hall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exceptions to the rule are always interesting, and the anomalies in the stress-strain curves of mild steel and in many other metals and alloys have excited the curiosity of engineers and scientists for well over a hundred years. Yet it is only during the last twenty years that significant theoretical advances have been made, and the aim of this book has been to examine these theories against the background of the considerable volume of experimental results published over the last few years, up to mid-1969. Hence this review volume has a two-fold aim; the first chapter attempts to review the general theories of yield point phenomena, using sufficient examples only to illustrate the theories. This chapter is intended to be complete in itself, and could be read by under graduates who wish to appraise rapidly the general background to the problem. The remaining chapters deal, in turn, with the various alloys exhibiting yield point phenomena. Thus, chapter 2 on mild steel, is a more extensive study of quench and strain ageing, while Chapter 3 is on the refractory metals and discusses theories of the low-temperature strength. The next concerns hydrogen in meta-Is. Chapters 5 and 6 discuss the face-centred cubic alloys, particularly the cases of the unloading yield point and intermetallic compounds. Chapter 7 covers hexagonal and ionic structures. A brief final chapter considers the areas where further research may be fruitful.

Download or read book Yield Point Phenomena in Metals and Alloys written by Eric O. Hall and published by . This book was released on 1970 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yield Point Phenomena in Aluminium Alloys experiments on the Effect of Alloy Composition written by Allan James Swan and published by . This book was released on 1953 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yield Point Phenomena in Aluminium Alloys Experiments on the Effect of Alloy Composition With Plates written by Allan James SWAIN (and EBORALL (Richard John Lane)) and published by . This book was released on 1951 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Yield Phenomena in Metals and Alloys written by Eric Ogilvie Hall and published by . This book was released on 1970 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book An Introduction to the Properties of Engineering Materials written by Pascoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: The engineering designer is always limited by the properties of available materials. Some properties are critically affected by variations in com position, in state or in testing conditions, while others are much less so. The engineer must know this if he is to make intelligent use of the data on properties of materials that he finds in handbooks and tables, and if he is to exploit successfully new materials as they become available. He can only be aware of these limitations if he understands how pro perties depend on structure at the atomic, molecular, microscopic and macroscopic levels. Inculcating this awareness is one of the chief aims of the book, which is based on a successful course designed to give university engineering students the necessary basic knowledge of these various levels. The material is equivalent to a course of about eighty to a hundred lectures. In the first part of the book the topics covered are mainly fundamental physics. The structure of the atom, considered in non-wave-mechanical terms, leads to the nature of interatomic forces and aggregations of atoms in the three forms-gases, liquids and solids. Sufficient crystallography is discussed to facilitate an understanding of the mechanical behaviour of the crystals. The band theory of solids is not included, but the basic concepts which form a preliminary to the theory-energy levels of electrons in an atom, Pauli's exclusion principle, and so on-are dealt with.

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1974 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Relaxation Phenomena in Metals and Alloys written by B. N. Finkel shtein and published by Springer. This book was released on 1963-11 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Manufacturing Technology XXXVI written by A. Thomas and published by IOS Press. This book was released on 2023-12-14 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like many other fields, the area of manufacturing has advanced massively since the onset of the technological revolution brought about by advances in computing and smart technologies, and with the accelerating globalisation of manufacturing in the 21st century, the urgent need to keep pace has produced further rapid advancements in technology, research, and innovation. This book presents the proceedings of ICMR 2023, the 20th International Conference on Manufacturing Research, held from 6 – 8 September 2023 in Aberystwyth, Wales, UK. This annual conference is a friendly and inclusive platform for a broad community of researchers with the common goal of developing and managing the technologies and operations key to manufacturing. As well as bringing together researchers, academics, and industrialists to share their knowledge and experience, the conference also serves to promote manufacturing-engineering education, training and research. Reflecting the context of Industry 4.0 and beyond, the theme of the 2023 conference is sustainability in smart manufacturing environments. More than 68 papers were submitted for the conference, from which the 33 papers presented here were selected and accepted after a rigorous peer review process; an acceptance rate of 49%. The papers are grouped into 8 sections: operations and supply chain management; manufacturing technology; manufacturing and process modeling; robotics and simulation systems; supply chain systems; process characterization and simulation; operations and supply chain management; and design and prototyping. Providing a wide-ranging overview of advances in the field, the book will be of interest to all those working in manufacturing research.

Download or read book Shock Waves and High Strain Rate Phenomena in Metals written by Marc A. Meyers and published by Springer. This book was released on 1981 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific understanding of high-velocity deformation has advanced substantially during the past decade. On the one hand, the framework for a theory explaining the metallurgical effects of shock waves is beginning to take shape; on the other hand, the technological applications of high strain-rate processes have found their way into industries in countries around the world. Ex plosive cladding, welding, forming, compaction and consolidation, cutting, and hardening, in addition to high energy-rate deformation processes using other energy sources, are some of the topics of contemporary technological importance. Metallurgical effects are of the utmost importance in both the scientific understanding of the phenomena involved, and in the successful development and utilization of the associated applications. The international conference upon which this book is based had as its major objectives the acceleration of progress in the field of high-strain rate deformation and fabrication, including applications, by providing a forum for the exchange of state-of-the art information on the metallurgical effects of high strain-rate deformation and fabrication; and the organization of this informa tion into a timely and coherent body of knowledge focused around significant areas and applications. This volume is a manifestation of these objectives. In addition, the contents of this book were organized to provide for a somewhat logical perspective of the fundamentals, development, and state-of-the-art applications of high strain-rate and shock phenomena.

Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Elsevier. This book was released on 2010-11-25 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is an important metal in manufacturing, due to its versatile properties and the many applications of both the processed metal and its alloys in different industries. Fundamentals of aluminium metallurgy provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries.Part one discusses different methods of producing and casting aluminium, covering areas such as casting of alloys, quality issues and specific production methods such as high-pressure diecasting. The metallurgical properties of aluminium and its alloys are reviewed in Part two, with chapters on such topics as hardening, precipitation processes and solute partitioning and clustering, as well as properties such as fracture resistance. Finally, Part three includes chapters on joining, laser sintering and other methods of processing aluminium, and its applications in particular areas of industry such as aerospace.With its distinguished editor and team of expert contributors, Fundamentals of aluminium metallurgy is a standard reference for researchers in metallurgy, as well as all those involved in the manufacture and use of aluminium products. - Provides a comprehensive overview of the production, properties and processing of aluminium, and its applications in manufacturing industries - Considers many issues of central importance in aluminium production and utilization considering quality issues and design for fatigue growth resistance - Metallurgical properties of aluminium and its alloys are further explored with particular reference to work hardening and applications of industrial alloys

Download or read book The Physics of Large Deformation of Crystalline Solids written by James F. Bell and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Historically, a major problem for the study of the large deformation of crystalline solids has been the apparent lack of unity in experimentally determined stress-strain functions. The writer's discovery in 1949 of the unexpectedly high velocity of incremental loading waves in pre-stressed large deformation fields emphasized to him the pressing need for the independent, systematic experimental study of the subject, to provide a firm foundation upon which physically plausible theories for the finite deformation of crystalline solids could be constructed. Such a study undertaken by the writer at that time and continued uninterruptedly to the present, led in 1956 to the development of the diffraction grating experiment which permitted, for the first time, the optically accurate determination of the strain-time detail of non-linear finite amplitude wave fronts propagating into crystalline solids whose prior history was precisely known. These experimental diffraction grating studies during the past decade have led to the discovery that the uniaxial stress-strain functions of 27 crystalline solids are unified in a single, generalized stress-strain function which is described, much of it hitherto unpublished, in the present monograph. The detailed study of over 2,000 polycrystal and single crystal uni axial stress experiments in 27 crystalline solids, in terms of the variation of a large number of pertinent parameters, has provided new unified pat terns of understanding which, it is hoped, will be of interest and value to theorists and experimentalists alike.

Download or read book Heat Treating Including Steel Heat Treating In the New Millennium written by Sandra J. Midea and published by ASM International. This book was released on 2000-01-01 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 1999 meeting examine heat treating and associated industries, touching on aspects of control of microstructure through heat treatment, equipment and processes, forge heating with induction, quenching and distortion, and steel heat treating in the new millennium. Subjects inclu

Download or read book Failure Mechanisms in Alloys written by George A. Pantazopoulos and published by MDPI. This book was released on 2020-03-19 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The era of lean production and excellence in manufacturing, advancing with sustainable development, demands the rational utilization of raw materials and energy resources, adopting cleaner and environmentally-friendly industrial processes. In view of the new industrial revolution, through digital transformation, the exploitation of smart and sophisticated materials systems, the need of minimizing scrap and increasing efficiency, reliability and lifetime and, on the other hand, the pursuit of fuel economy and limitation of carbon footprint, are necessary conditions for the imminent growth in a highly competitive economy. Failure analysis is an interdisciplinary scientific topic, reflecting the opinions and interpretations coming from a systematic evidence-gathering procedure, embracing various important sectors, imparting knowledge, and substantiating improvement practices. The deep understanding of material/component role (e.g., rotating shaft, extrusion die, gas pipeline) and properties will be of central importance for fitness for purpose in certain industrial processes and applications. Finally, it is hoped and strongly believed that the accumulation of additional knowledge in the field of failure mechanisms and the adoption of the principles, philosophy, and deep understanding of failure analysis process approach will strongly promote the learning concept, as a continuously evolving process leading to personal and social progress and prosperity.

Download or read book Current Science written by and published by . This book was released on 1972 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: