Download or read book Yield Point Phenomena in Metals and Alloys written by E. Hall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exceptions to the rule are always interesting, and the anomalies in the stress-strain curves of mild steel and in many other metals and alloys have excited the curiosity of engineers and scientists for well over a hundred years. Yet it is only during the last twenty years that significant theoretical advances have been made, and the aim of this book has been to examine these theories against the background of the considerable volume of experimental results published over the last few years, up to mid-1969. Hence this review volume has a two-fold aim; the first chapter attempts to review the general theories of yield point phenomena, using sufficient examples only to illustrate the theories. This chapter is intended to be complete in itself, and could be read by under graduates who wish to appraise rapidly the general background to the problem. The remaining chapters deal, in turn, with the various alloys exhibiting yield point phenomena. Thus, chapter 2 on mild steel, is a more extensive study of quench and strain ageing, while Chapter 3 is on the refractory metals and discusses theories of the low-temperature strength. The next concerns hydrogen in meta-Is. Chapters 5 and 6 discuss the face-centred cubic alloys, particularly the cases of the unloading yield point and intermetallic compounds. Chapter 7 covers hexagonal and ionic structures. A brief final chapter considers the areas where further research may be fruitful.

Download or read book Yield Point Phenomena in Metals and Alloys written by Eric O. Hall and published by . This book was released on 1970 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yield Phenomena in Metals and Alloys written by Eric Ogilvie Hall and published by . This book was released on 1970 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Creep in Metals and Alloys written by Michael E. Kassner and published by Elsevier. This book was released on 2004-04-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials * Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures * Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussionUnderstanding the strength of materials at a range of temperatures is critically important to a huge number of researchers and practitioners from a wide range of fields and industry sectors including metallurgists, industrial designers, aerospace R&D personnel, and structural engineers. The most up-to date and comprehensive book in the field, Fundamentals of Creep in Metals and Alloys discusses the fundamentals of time-dependent plasticity or creep plasticity in metals, alloys and metallic compounds. This is the first book of its kind that provides broad coverage of a range of materials not just a sub-group such as metallic compounds, superalloys or crystals. As such it presents the most balanced view of creep for all materials scientists. The theory of all of these phenomena are extensively reviewed and analysed in view of an extensive bibliography that includes the most recent publications in the field. All sections of the book have undergone extensive peer review and therefore the reader can be sure they have access to the most up-to-date research, fully interrogated, from the world's leading investigators.· Numerous line drawings with consistent format and units allow easy comparison of the behavior of a very wide range of materials· Transmission electron micrographs provide a direct insight in the basic microstructure of metals deforming at high temperatures· Extensive literature review of over 1000 references provide an excellent reference document, and a very balanced discussion

Download or read book Yield Point Phenomena in Aluminium Alloys experiments on the Effect of Alloy Composition written by Allan James Swan and published by . This book was released on 1953 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Yield Point Phenomena in Aluminium Alloys Experiments on the Effect of Alloy Composition With Plates written by Allan James SWAIN (and EBORALL (Richard John Lane)) and published by . This book was released on 1951 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shock Waves and High Strain Rate Phenomena in Metals written by Mare Meyers and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1084 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific understanding of high-velocity deformation has advanced substantially during the past decade. On the one hand, the framework for a theory explaining the metallurgical effects of shock waves is beginning to take shape; on the other hand, the technological applications of high strain-rate processes have found their way into industries in countries around the world. Ex plosive cladding, welding, forming, compaction and consolidation, cutting, and hardening, in addition to high energy-rate deformation processes using other energy sources, are some of the topics of contemporary technological importance. Metallurgical effects are of the utmost importance in both the scientific understanding of the phenomena involved, and in the successful development and utilization of the associated applications. The international conference upon which this book is based had as its major objectives the acceleration of progress in the field of high-strain rate deformation and fabrication, including applications, by providing a forum for the exchange of state-of-the art information on the metallurgical effects of high strain-rate deformation and fabrication; and the organization of this informa tion into a timely and coherent body of knowledge focused around significant areas and applications. This volume is a manifestation of these objectives. In addition, the contents of this book were organized to provide for a somewhat logical perspective of the fundamentals, development, and state-of-the-art applications of high strain-rate and shock phenomena.

Download or read book Relaxation Phenomena in Metals and Alloys written by B. N. Finkel shtein and published by Springer. This book was released on 1963-11 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creep and High Temperature Deformation of Metals and Alloys written by Stefano Spigarelli and published by MDPI. This book was released on 2019-12-12 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: By the late 1940s, and since then, the continuous development of dislocation theories have provided the basis for correlating the macroscopic time-dependent deformation of metals and alloys—known as creep—to the time-dependent processes taking place within the metals and alloys. High-temperature deformation and stress relaxation effects have also been explained and modeled on similar bases. The knowledge of high-temperature deformation as well as its modeling in conventional or unconventional situations is becoming clearer year by year, with new contemporary and better performing high-temperature materials being constantly produced and investigated. This book includes recent contributions covering relevant topics and materials in the field in an innovative way. In the first section, contributions are related to the general description of creep deformation, damage, and ductility, while in the second section, innovative testing techniques of creep deformation are presented. The third section deals with creep in the presence of complex loading/temperature changes and environmental effects, while the last section focuses on material microstructure–creep correlations for specific material classes. The quality and potential of specific materials and microstructures, testing conditions, and modeling as addressed by specific contributions will surely inspire scientists and technicians in their own innovative approaches and studies on creep and high-temperature deformation.

Download or read book Self diffusion of Metals and Associated Phenomena written by R. W. Balluffi and published by . This book was released on 1954 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.

Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.

Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by George E. Totten and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book The yielding phenomenon of metals written by G. Welter and published by . This book was released on 1946 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.

Download or read book Transactions of the American Society for Steel Treating written by American Society for Steel Treating and published by . This book was released on 1928 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Nitrogen Steels written by Valentin G. Gavriljuk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic research and new manufacturing methods have led to high nitrogen steels (HNS), a promising new group of materials for use in advanced applications in mechanical and chemical engineering. The book deals with the atomic structure, constitution, properties, manufacturing and application of martensitic, austenitic, duplex and dualphase steels of superior strength and corrosion resistance. Combining metallurgy and engineering aspects. It gives a detailed overview and presents new results on HNS. The book is intended for scientists as well as technologists, who will find stimulating information.