Download or read book Agglomeration of Iron Ores written by Ram Pravesh Bhagat and published by CRC Press. This book was released on 2019-07-11 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on agglomeration, or the size enlargement process, of iron ores. This process sits at the interface of mineral processing and extractive metallurgy. The book begins with a discussion of raw materials preparation and the beneficiation process. It then describes fundamental principles of the sintering and pelletization processes, including formation of green mix through granulation and green balls as well as chemical reactions during sintering. Finally, it offers a brief description of iron making processes and correlations related to the agglomerates: quality parameters and BF productivity and coke rate.
Download or read book Froth Flotation written by Maurice C. Fuerstenau and published by SME. This book was released on 2007 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;Froth Flotation: A Century of Innovation comprehensively describes state-of-the-art research and practice in mineral froth flotation a century after its introduction. Recognized experts from around the world provide in-depth coverage on many facets of flotation, including the historical aspects; fundamentals; chemistry; flotation cells, modeling, and simulation; and flotation plant practice. This commemorative volume is an invaluable reference for industry professionals, researchers, and graduate students."--BOOK JACKET.
Download or read book Process Mineralogy written by Megan Becker and published by . This book was released on 2016-12-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Hydrocyclone written by D. Bradley and published by Elsevier. This book was released on 2013-10-22 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Hydrocyclone reviews data on the theoretical, design, and performance aspects of the liquid cyclone, hydraulic cyclone, or hydrocyclone. The book aims to be a source of reference to those who are in industries employing the use and application of the hydrocyclone. The text covers the historical development of the cyclone; flow pattern and distribution of velocities within the cyclone body; operational characteristics and areas of application in different phase separations; and the operating and design variables affecting the performance of the hydrocyclone. Categories of cyclone; commercially available cyclone equipment; and the specific industrial applications of the hydrocyclone are also surveyed. The text will be of practical use to industrial engineers, mechanical engineers, plant operators, miners, and researchers.
Download or read book Mineral Processing and the Environment written by G.P. Gallios and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral processing technologies have been used for decades to protect the environment and many examples of such applications are given here. The book covers four major subject areas: fundamentals; environmental pollution and its prevention; separation processes; and innovative techniques. Audience: Scientists, engineers and technologists conducting both applied and basic research into the different environmental aspects of mineral processing.
Download or read book Process Engineering of Size Reduction written by Leonard G. Austin and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.
Download or read book Advances in Comminution written by S. Komar Kawatra and published by SME. This book was released on 2006 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The 36 chapters are based on the 2006 SME symposium"--Page 4 de la couverture.
Download or read book Handbook of Flotation Reagents Chemistry Theory and Practice written by Srdjan M. Bulatovic and published by Elsevier. This book was released on 2007-02-19 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Flotation Reagents: Chemistry, Theory and Practice is a condensed form of the fundamental knowledge of chemical reagents commonly used in flotation and is addressed to the researchers and plant metallurgists who employ these reagents. Consisting of three distinct parts: 1) provides detailed description of the chemistry used in mineral processing industry; 2) describes theoretical aspects of the action of flotation reagents3) provides information on the use of reagents in over 100 operating plants treating Cu, Cu/Zn, Cu/Pb, Zn, Pb/Zn/Ag, Cu/Ni and Ni ores.* Looks at the theoretical aspects of flotation reagents* Examines the practical aspects of using chemical reagents in operating plants* Provides guidelines for researchers and engineers involved in process design and development
Download or read book Advances in Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2005-12-02 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold processing industry is experiencing change. As free-milling and oxide ores become depleted, more complex polymetallic and refractory ores are being processed, coupled with increasing pressure for stricter environmental compliance. Recent years have also seen a steady reduction in mineral processing and metallurgy graduates and a gradual loss of older operating experience. A contribution to documenting current and future best practice in gold ore processing seems timely.The focus of this volume is on advances in current gold plant operation, from conception to closure; chapters also cover innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage. Sufficient coverage is also given to the chemistry and engineering aspects. The general principle behind the structure of the volume is that of flowsheeting based on unit operations and applied to a mineralogical classification of gold ore types. From concept to closure, this book covers all unit operations, mineralogies and processes that are relevant to dealing with today's complex orebodies.Practical experience is vital to the successful development, operation and closure of any operation. The 42 chapters have been contributed by a total of 66 authors and co-authors who are experts from countries spanning the globe, and representing exhaustive practical knowledge covering many disciplines relevant to gold processing.* Current best practice as elucidated by a select panel of experts in the field* Innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage* Mineralogical-based approach to flowsheeting
Download or read book Advances in Mineral Processing and Hydrometallurgy written by Corby G Anderson and published by Mdpi AG. This book was released on 2021-09-23 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a Special Issue of Metals devoted to aspects of Advances in Mineral Processing and Hydrometallurgy. This includes a global call for article submissions that also included Characterization along with Recycling and Waste Minimization. As such, both primary and recycled aspects will be considered. Possible specific topics included Mineralogy, Geometallurgy, Thermodynamics, Kinetics, Comminution, Classification, Physical Separations, Liquid-Solid Separations, Leaching, Solvent Extraction, Ion Exchange, Activated Carbon, Precipitation, Reduction, Process Economics and Process Control. Suggested application areas were in Gold, Silver, PGM's, Aluminum, Copper, Zinc, Lead, Nickel, and Titanium. Critical Metals articles on topics such as Lithium, Antimony Tellurium, Gallium, Germanium, Cobalt, Graphite, Indium, and Rare Earth were also welcome. As such, this Special Issue of Metals was well supported by diverse submissions and the final publication of high-quality peer-reviewed articles.
Download or read book Proceedings of the Scientific Practical Conference Research and Development 2016 written by K. V. Anisimov and published by Springer. This book was released on 2017-12-04 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book relates to the III Annual Conference hosted by The Ministry of Education and Science of the Russian Federation in December 2016. This event has summarized, analyzed and discussed the interim results, academic outputs and scientific achievements of the Russian Federal Targeted Programme “Research and Development in Priority Areas of Development of the Russian Scientific and Technological Complex for 2014–2020.” It contains 75 selected papers from 6 areas considered priority by the Federal Targeted Programme: computer science, ecology & environment sciences; energy and energy efficiency; lifesciences; nanoscience & nanotechnology and transport & communications. The chapters report the results of the 3-years research projects supported by the Programme and finalized in 2016.
Download or read book Lateritic Bauxites written by György Bárdossy and published by . This book was released on 1990 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Process Development in Metallurgical Industry written by Vaikuntam Iyer Lakshmanan and published by Springer. This book was released on 2015-10-26 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the phases for innovative metallurgical process development, from concept to commercialization. Key features of the book include: • Need for process innovation • Selection and optimization of process steps • Determination of the commercial feasibility of a process including engineering and equipment selection • Determination of the environmental footprint of a process • Case-study examples of innovative process development
Download or read book Handbook of Antistatics written by Jurgen Pionteck and published by ChemTec Publishing. This book was released on 2007-01-15 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive handbook written on the subject of antistatic additives for polymers. These are additives capable of modifying properties of materials in such a way they become antistatic, conductive, and/or EMI shielding. The book contains 22 chapters, each addressing a specific aspect of properties and applications of antistatic agents. The comprehensive analysis of performance of these materials forms a critical source of information for industry, research, academia, and legislature.
Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models.* Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises
Download or read book Mineral Processing Plant Design Practice and Control written by Andrew L. Mular and published by SME. This book was released on 2002 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on 138 proceedings papers from October 2002, this broad reference will become the new standard text for colleges and will become a must for engineers, consultants, suppliers, manufacturers.
