Download or read book XI Airapt written by N. V. Novikov and published by CRC Press. This book was released on 1989 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Science And Technology Proceedings Of The Joint Xv Airapt And Xxxiii Ehprg International Conference written by W Trzeciakowski and published by World Scientific. This book was released on 1996-07-04 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will contain about 40 invited papers and over 200 contributed papers covering all aspects of high-pressure research in physics, chemistry, materials science and biology. It will serve as an exhaustive review of recent achievements in these areas and of the topics of major interest. The list of subjects include: 1) Electronic, optical, and transport properties of solids; 2) Phase transitions, structural properties, and lattice dynamics; 3) Crystal growth and material synthesis; 4) Organic synthesis and biological applications; 5) Geophysical sciences; 6) Instrumentation and metrology; 7) Superhard materials; 8) Ceramics and sintering; 9) Food processing; 10) Plasticity and hydroextrusion.Contributors include: N W Ashcroft (USA), V Blank (Russia), E M Cambell (USA), H G Drickamer (USA), W B Holzapfel (Germany), J Karpinski (Switzerland), H K Mao (USA), W J Nellis (USA), W Paul (USA), E G Ponyatovsky (Russia), A L Ruoff (USA), J S Schilling (USA), O Shimomura (Japan), I F Silvera (USA), B Sundquist (Sweden).
Download or read book High Pressure Science and Technology written by W. B. Holzapfel and published by . This book was released on 1990 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Surface Science and Engineering written by Yury Gogotsi and published by CRC Press. This book was released on 2019-09-19 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many instances of mechanical interaction between two materials, the physical contact affects only the outermost surface layer, with little discernible influence on the bulk of the material. The resultant high pressures in these localised regimes can induce surface structural changes such as deformation, phase transformation and amorphization.
Download or read book Science and Technology of High Pressure written by Murli H. Manghnani and published by Universities Press. This book was released on 2000 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: These books presents a wide spectrum of research and development activities in the field of High Pressure Science and Technology. These book provide comprehensive and interdisciplinary descriptions of recent research accomplishments in the biological, chemical, Earth, materrals, physical, physiological and related sciences.
Download or read book Modern Gas Based Temperature and Pressure Measurements written by Franco Pavese and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the beginning of the preparation of this volume, we have been convinced that temperature and pressure measurements should not be separated, particularly in different applications at low temperatures. This belief has made us deeply conscious of the fact that the advanced applications and modern experimental methods of investigation in science and technology need the combination of various professional experiences and approaches. Although the book is divided into two parts (Part I by F. Pavese and Part II by G. F. Molinar), we have tried to correlate low-temperature and low-pressure measurements as much as possible. We hope that our readers will find this book, which contains a large number of experimental and reference data, useful in their effort to solve measurement problems. We are pleased to acknowledge our debt to several persons and wish to express our gratitude to them for their valuable cooperation and help: to our research group colleagues at the Istituto di Metrologia "G. Colonnetti" -IMGC (CNR), without whom the knowledge and the experience we built up during many years could not have been acquired; to G. T. McConville, M. Durieux, and K. Grohmann for revisions of and various suggestions for Part I; to V. E. Bean and C. R. Tilford of NIST and G. T. McConville for revisions of and various suggestions for Part II; and to I. Prinetti of IMGC for many valuable suggestions and careful textual revisions.
Download or read book Compounds and Alloys Under High Pressure written by E. Yu Tonkov and published by Taylor & Francis. This book was released on 2022-11-30 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to classify and systematize the available data on the behavior of binary alloys under high pressure. Despite the fact that there is a strong correlation between temperature-composition (T-C) phase diagrams at normal pressure and three- dimensional temperature-composition-pressure (T-C-P) diagrams, many material scientists seldom refer to the (T-C-P) diagrams, just as many high pressure researchers often ignore the data obtained at normal pressure. This book aims to bridge the gap between data obtained at high pressure and that obtained at normal pressure. The most recent research covers not only elements and stoichiometric compounds, but also binary, ternary, and multicomponent alloys, and so this book covers an extended range of substances. The properties of 890 binary systems and a further 1153 pseudobinary and ternary systems are summarized, and accompanied by an extensive bibliography. The data includes information on the solubility of components in solid solutions, melting, and first- and second-order phase transformations in alloys and stoichiometric compounds.
Download or read book Raman Microscopy written by George Turrell and published by Academic Press. This book was released on 1996-06-24 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first books devoted entirely to the subject of Raman microscopy, Raman Microscopy addresses issues of great interest to engineers working in Raman-microscope development and researchers concerned with areas ofapplication for this science. The book is written by several world recognized experts, who summarize the Raman effect before discussing the hardware and software involved in todays instruments. This format provides an excellent introduction to this up-and-coming discipline. All important applications, including those in materials science and earth science are covered in depth. - Includes extensive description of the instrumentation, the Raman microspectrograph, the treatment of data, and micro-Raman imaging - Examines the use of Raman microscopy in diverse applications, including some of the hyphenated methods - Summarizes the Raman effect - Discusses new uses for this technology
Download or read book Journal of Research of the National Bureau of Standards written by and published by . This book was released on 1988 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics of Heterogeneous Materials written by Vitali Nesterenko and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph deals with the behavior of essentially nonlinear heterogeneous materials in processes occurring under intense dynamic loading, where microstructural effects play the main role. This book is not an introduction to the dynamic behavior of materials, and general information available in other books is not included. The material herein is presented in a form I hope will make it useful not only for researchers working in related areas, but also for graduate students. I used it successfully to teach a course on the dynamic behavior of materials at the University of California, San Diego. Another course well suited to the topic may be nonlinear wave dynamics in solids, especially the part on strongly nonlinear waves. About 100 problems presented in the book at the end of each chapter will help the reader to develop a deeper understanding of the subject. I tried to follow a few rules in writing this book: (1) To focus on strongly nonlinear phenomena where there is no small parameter with respect to the amplitude of disturbance, including solitons, shock waves, and localized shear. (2) To take into account phenomena sensitive to materials structure, where typical space scale of material parameters (particle size, cell size) are presented in the models or are variable in experimental research.
Download or read book Journal of Research of the National Institute of Standards and Technology written by and published by . This book was released on 1988 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Research of the National Bureau of Standards written by United States. National Bureau of Standards and published by . This book was released on 1988 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mineral Physics In Memory of Orson Anderson written by Robert Cooper Liebermann and published by MDPI. This book was released on 2020-12-29 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue contains original scientific papers in the field of mineral physics (and also rock physics). These papers are grouped into four categories: Reviews, Experimental Science, Theoretical Science and Technological Developments. These papers include those from first authors covering 5 generations of mineral physicists, including contemporaries of Orson [e.g., William Bassett, Frank Stacey], the next generation of leaders in mineral physics throughout the world [e.g., Michael Brown, Eiji Ohtani], current leaders in this field [e.g., Agnes Dewaele, Jun Tsuchiya], senior graduate students [e.g., Jan Borgomano, Vasilije Dobrosavlijevic, Francesca Miozzi], and an undergraduate student [e.g., Tyler Perez]. Mineral physics is the study of mineralogical problems through the application of condensed matter physics. In reality, mineral physicists use not only physics, but also solid-state chemistry; they study not only minerals, but all materials related to natural minerals (e.g., structural analogs, but also glasses, melts and fluids). Mineral and rock physics is intimately connected to many other geoscience disciplines including seismology, planetary science, petrology, geochemistry, geomagnetism, and geodynamics, and even materials and climate science. This book is dedicated to Orson Anderson who died in June 2019 at the age of 94.
Download or read book Phase Transformations of Elements Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 2018-10-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As laboratories replace heavy hydraulic presses and bulky high-pressure chambers with miniature diamond anvils, traditional heaters with laser heating, and continue to improve methods of shock compression, there has been considerable new data obtained from the high-pressure, high-temperature modification of pure elements. The dense metallic modification of elements shows the potential for achieving superconductivity akin to theoretical predictions. Phase Transformations of Elements Under High Pressure contains the latest theoretical and experimental information on nearly 100 elements, including first-and second-phase transitions, melting lines, crystal structures of stable and metastable phases, stability of polymorphic modifications, and other useful properties and data. It emphasizes features such as changes in the liquid state, amorphization, and metallization, and provides temperature-pressure diagrams for every element. The book also describes the transitions of polymeric forms of fullerene, crystal modifications of elements stable under high pressures, and provides data that confirms their superconducting and magnetic properties. This handbook will be a lasting reference for scientists in a broad range of disciplines, including solid-state physics, chemistry, crystallography, mineralogy, and materials science.
Download or read book Industrial Diamond Review written by and published by . This book was released on 1986 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1989 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented in this publication cover special problems in the field of energetic materials, particularly detonation phenomena in solids and liquids. General subject areas include shock-to-detonation transition, time resolved chemistry, initiation modeling, deflagration-to-detonation transition, equation of state and equation of state and performance, composites and emulsions, and composites and emulsions/underwater explosives, reaction zone, detonation wave propagation, hot spots, detonation products, chemistry and compositions, and special initiation.
Download or read book High Pressure Chemistry and Physics of Polymers written by A.L. Kovarskii and published by CRC Press. This book was released on 1994-02-03 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Pressure Chemistry and Physics of Polymers is devoted to covering all areas of high-pressure polymer materials science. Topics addressed include the synthesis of polymers, changes in reactivity, structural transformations, molecular dynamics, relaxation processes, deformational properties, chemical modification, and the effect of shock waves and shear stresses. The authors' contributions reflect over 60 years of Soviet study in the field of physico-chemistry conducted at the major former Soviet Institutes of Chemical Physics, Organic Chemistry, Polymer Chemistry, and Physical Chemistry. Fundamental topics such as compressibility of polymers, polymerization under pressure, viscoelastic/deformational properties, and polymer modification are discussed with an eye toward materials development for improving physical models and methods of calculating the changing parameters of materials under pressure. The book is a valuable reference to data on mechanisms of physical and chemical processes, in addition to new experimental data for improving physical models and methods of calculating changes in material characteristics under compression loads. High-Pressure Chemistry and Physics of Polymers will be an important reference for graduate students and practicing professionals in polymer chemistry and polymeric materials.
