Download or read book X ray Absorption Spectroscopy for the Chemical and Materials Sciences written by John Evans and published by John Wiley & Sons. This book was released on 2018-02-05 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear-cut introduction to the technique and applications of x-ray absorption spectroscopy X-ray Absorption Spectroscopy is being applied to a widening set of disciplines. Applications started with solid state physics and grew to materials science, chemistry, biochemistry and geology. Now, they cut across engineering materials, environmental science and national heritage — providing very detailed and useful information facilitating understanding and development of materials. This practical guide helps investigators choose the right experiment, carry it out properly and analyze the data to give the best reliable result. It gives readers insights to extract what they need from the world of large-scale experimental facilities like synchrotrons, which seem distant to many laboratory scientists. X-ray Absorption Spectroscopy for the Chemical and Materials Sciences seeks to educate readers about the strengths and limitations of the techniques, including their accessibility. Presented in six sections, it offers chapters that cover: an introduction to X-ray absorption fine structure XAFS; the basis of XAFS; X-ray sources; experimental methods; data analysis and simulation methods; and case studies. A no-nonsense introduction to the technique and applications of x-ray absorption spectroscopy Features Questions to support learning through the book Relevant to all working on synchrotron sources and applications in physics, materials, environment/geology and biomedical materials Four-color representation allows easy interpretation of images and data for the reader X-ray Absorption Spectroscopy for the Chemical and Materials Sciences is aimed at Masters-level and PhD students embarking on X-ray spectroscopy projects as well as scientists in areas of materials characterization.
Download or read book X ray Absorption Spectroscopy for the Chemical and Materials Sciences written by John Evans and published by John Wiley & Sons. This book was released on 2018-02-05 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clear-cut introduction to the technique and applications of x-ray absorption spectroscopy X-ray Absorption Spectroscopy is being applied to a widening set of disciplines. Applications started with solid state physics and grew to materials science, chemistry, biochemistry and geology. Now, they cut across engineering materials, environmental science and national heritage — providing very detailed and useful information facilitating understanding and development of materials. This practical guide helps investigators choose the right experiment, carry it out properly and analyze the data to give the best reliable result. It gives readers insights to extract what they need from the world of large-scale experimental facilities like synchrotrons, which seem distant to many laboratory scientists. X-ray Absorption Spectroscopy for the Chemical and Materials Sciences seeks to educate readers about the strengths and limitations of the techniques, including their accessibility. Presented in six sections, it offers chapters that cover: an introduction to X-ray absorption fine structure XAFS; the basis of XAFS; X-ray sources; experimental methods; data analysis and simulation methods; and case studies. A no-nonsense introduction to the technique and applications of x-ray absorption spectroscopy Features Questions to support learning through the book Relevant to all working on synchrotron sources and applications in physics, materials, environment/geology and biomedical materials Four-color representation allows easy interpretation of images and data for the reader X-ray Absorption Spectroscopy for the Chemical and Materials Sciences is aimed at Masters-level and PhD students embarking on X-ray spectroscopy projects as well as scientists in areas of materials characterization.
Download or read book X Ray Absorption and X Ray Emission Spectroscopy written by Jeroen A. van Bokhoven and published by John Wiley & Sons. This book was released on 2016-01-14 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last two decades, remarkable and often spectacularprogress has been made in the methodological and instrumentalaspects of x–ray absorption and emission spectroscopy. Thisprogress includes considerable technological improvements in thedesign and production of detectors especially with the developmentand expansion of large-scale synchrotron reactors All this hasresulted in improved analytical performance and new applications,as well as in the perspective of a dramatic enhancement in thepotential of x–ray based analysis techniques for the nearfuture. This comprehensive two-volume treatise features articlesthat explain the phenomena and describe examples of X–rayabsorption and emission applications in several fields, includingchemistry, biochemistry, catalysis, amorphous and liquid systems,synchrotron radiation, and surface phenomena. Contributors explainthe underlying theory, how to set up X–ray absorptionexperiments, and how to analyze the details of the resultingspectra. X-Ray Absorption and X-ray Emission Spectroscopy: Theory andApplications: Combines the theory, instrumentation and applications of x-rayabsorption and emission spectroscopies which offer uniquediagnostics to study almost any object in the Universe. Is the go-to reference book in the subject for all researchersacross multi-disciplines since intense beams from modern sourceshave revolutionized x-ray science in recent years Is relevant to students, postdocurates and researchers workingon x-rays and related synchrotron sources and applications inmaterials, physics, medicine, environment/geology, andbiomedical materials
Download or read book X Ray Absorption Spectroscopy written by Graham George and published by . This book was released on 2019-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Targeted for chemists, the current textbook outlines the principles, experimental methods and data analysis in X-Ray Absorption Spectroscopy (XAS). The authors introduce EXAFS, Near-Edge XAS, X-Ray Imaging and many other advanced experimental techniques. A special section of the book is devoted to applications of XAS in chemistry, materials and environmental sciences.
Download or read book Advances in X ray Absorption Fine Structure Analysis written by Zhongrui (jerry) Li and published by . This book was released on 2020-11-15 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive, theoretical, practical, and thorough guide to current X-ray absorption fine structure (XAFS) spectroscopy and modern applications. It contains the experimental and theoretical aspects of XAFS in 14 chapters based on recent developments in the XAFS approach to science and technology, describing the basic principles and theories, calculation methods, computer programs, advanced methodologies and techniques, experiments, data analysis and interpretation and applications. Among the broad XAFS subjects of synchrotron radiation applications, the book specifically covers EXAFS, XANES and NEXAFS, AXAFS, DAFS, XMCD, MEXAFS, XMLD, and X-ray natural dichroism (XNCD and XNLD). This book may serve as a reference book for researchers and technicians taking up synchrotron radiation application research and postgraduates majoring in the X-ray absorption spectroscopy field. It will provide the beginners with all the necessary information in the field of XAFS. Also, experienced users active in particular subfields of XAFS spectroscopies will learn in this book about the enormous potential of XAFS for other applications in physics, chemistry, biology, materials science and engineering, geo- and environmental science, etc. For more details, please visit https: //centralwestpublishing.com s book provides a comprehensive, theoretical, practical, and thorough guide to current X-ray absorption fine structure (XAFS) spectroscopy and modern applications. It contains the experimental and theoretical aspects of XAFS in 14 chapters based on recent developments in the XAFS approach to science and technology, describing the basic principles and theories, calculation methods, computer programs, advanced methodologies and techniques, experiments, data analysis and interpretation and applications. Among the broad XAFS subjects of synchrotron radiation applications, the book specifically covers EXAFS, XANES and NEXAFS, AXAFS, DAFS, XMCD, MEXAFS, XMLD, and X-ray natural dichroism (XNCD and XNLD).
Download or read book X Ray Absorption Spectroscopy of Semiconductors written by Claudia S. Schnohr and published by Springer. This book was released on 2014-11-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray Absorption Spectroscopy (XAS) is a powerful technique with which to probe the properties of matter, equally applicable to the solid, liquid and gas phases. Semiconductors are arguably our most technologically-relevant group of materials given they form the basis of the electronic and photonic devices that now so widely permeate almost every aspect of our society. The most effective utilisation of these materials today and tomorrow necessitates a detailed knowledge of their structural and vibrational properties. Through a series of comprehensive reviews, this book demonstrates the versatility of XAS for semiconductor materials analysis and presents important research activities in this ever growing field. A short introduction of the technique, aimed primarily at XAS newcomers, is followed by twenty independent chapters dedicated to distinct groups of materials. Topics span dopants in crystalline semiconductors and disorder in amorphous semiconductors to alloys and nanometric material as well as in-situ measurements of the effects of temperature and pressure. Summarizing research in their respective fields, the authors highlight important experimental findings and demonstrate the capabilities and applications of the XAS technique. This book provides a comprehensive review and valuable reference guide for both XAS newcomers and experts involved in semiconductor materials research.
Download or read book International Tables for Crystallography Volume I written by Christopher Chantler and published by John Wiley & Sons. This book was released on 2024-08-19 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray absorption spectroscopy and X-ray emission spectroscopy are complementary to crystallographic methods, particularly for materials science and the study of nanostructure and systems with partial disorder and partial local order, including solutions, gases, liquids, glasses and powders. This new volume of International Tables for Crystallography has nine parts and over 150 chapters contributed by a wide range of international experts. Part 1 provides a brief overview and introduction to the background of X-ray absorption spectroscopy (XAS) and experimental facilities. Part 2 discusses the quantum theory of XAS and related approaches. Part 3 describes both standard and advanced experimental methods used in XAS, X-ray emission spectroscopy (XES) and related techniques. Part 4 covers both standard and more advanced pre-processing of data. Part 5 gives an extensive overview of the analysis of experimental data. Part 6 provides details of the major software packages for data collection, reduction and analysis. Part 7 outlines the importance in science, reporting and hypothesis testing of the exchange of input and processed output data, and data deposition. It also presents excerpts of tables of data and supplementary material for XAS, pre-edge studies, X-ray absorption near-edge spectroscopy (XANES) and X-ray absorption fine structure (XAFS) studies. These tables are also available in full as online supporting information. Part 8 explores a wide range of applications of XAS in fields including materials science, physics, chemistry, biology, earth sciences, catalysis and cultural heritage. Part 9 presents definitions of the terms and quantities used, as developed by the International Union of Crystallography's Commission on XAFS. The volume has been written for the worldwide XAS community of thousands of practitioners, beamline scientists, experts and academics, and for the novice user who wishes to know what XAS and XES can do for them and how they may use these techniques for their particular purposes. The volume is therefore intended to be a self-contained, authoritative reference work that can also be used for training, learning or teaching, providing practical guidance for readers of all levels of experience. More information on the volumes in the series International Tables for Crystallography can be found at https://it.iucr.org.
Download or read book Synchrotron Radiation Techniques in Industrial Chemical and Materials Science written by Kevin L. D'Amico and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: The individual papers that comprise this monograph are derived from two American Chemical Society (ACS) Fall National Meetings that focused on the current uses of synchrotron radiation (SR) research techniques. The first Symposium was held in Washington, DC, in August 1994, and the second convened in Chicago, IL, in August 1995. The intent of these symposia was to present a broad overview of several current topics in industrial, chemical, and materials-based SR research to a chemically inclined audience. The SR techniques covered were divided roughly into the three general fields of industrial, chemical, and materials science for this purpose. Included within these four categories are environmental, geologic, atomic/molecular, analytical, solid state physics, surface science, and biological applications of SR. There is little doubt that structural biology and environmental science are the largest growth areas in SR research as this monograph goes to press. The spirit of these symposia was to bring together the expert synchrotron radiation user with new and potential users of SR techniques. There are now a preponderance of particle storage rings, located throughout the world, devoted exclusively to the production of SR. There have been great improvements in the particle accelerators and storage rings from which SR emanates. These newest third generation SR sources are the result of the successful collaboration between SR users and accelerator physicists which has made a reality out of experiments never before possible.
Download or read book Introduction to XAFS written by Grant Bunker and published by Cambridge University Press. This book was released on 2010-01-28 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray absorption fine structure spectroscopy (XAFS) is a powerful and versatile technique for studying structures of materials in chemistry, physics, biology and other fields. This textbook is a comprehensive, practical guide to carrying out and interpreting XAFS experiments. Assuming only undergraduate-level physics and mathematics, the textbook is ideally suited for graduate students in physics and chemistry starting XAFS-based research. It contains concise executable example programs in Mathematica 7. Supplementary material available at www.cambridge.org/9780521767750 includes Mathematica code from the book, related Mathematica programs, and worked data analysis examples. The textbook addresses experiment, theory, and data analysis, but is not tied to specific data analysis programs or philosophies. This makes it accessible to a broad audience in the sciences, and a useful guide for researchers entering the subject.
Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.
Download or read book Synchrotron Radiation in Materials Science written by Chunhai Fan and published by John Wiley & Sons. This book was released on 2018-05-29 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meeting the long-felt need for in-depth information on one of the most advanced material characterization methods, a top team of editors and authors from highly prestigious facilities and institutions covers a range of synchrotron techniques that have proven useful for materials research. Following an introduction to synchrotron radiation and its sources, the second part goes on to describe the various techniques that benefit from this especially bright light, including X-ray absorption, diffraction, scattering, imaging, and lithography. The thrid and final part provides an overview of the applications of synchrotron radiation in materials science. bridging the gap between specialists in synchrotron research and material scientists, this is a unique and indispensable resource for academic and industrial researchers alike.
Download or read book Springer Handbook of Advanced Catalyst Characterization written by Israel E. Wachs and published by Springer Nature. This book was released on 2023-06-12 with total page 1109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-edited by world-renowned scientists in the field of catalysis, this book contains the cutting-edge in situ and operando spectroscopy characterization techniques operating under reaction conditions to determine a materials’ bulk, surface, and solution complex and their applications in the field of catalysis with emphasis on solid catalysts in powder form since such catalyst are relevant for industrial applications. The handbook covers from widely-used to cutting-edge techniques. The handbook is written for a broad audience of students and professionals who want to pursue the full capabilities available by the current state-of-the-art in characterization to fully understand how their catalysts really operate and guide the rational design of advanced catalysts. Individuals involved in catalysis research will be interested in this handbook because it contains a catalogue of cutting-edge methods employed in characterization of catalysts. These techniques find wide use in applications such as petroleum refining, chemical manufacture, natural gas conversion, pollution control, transportation, power generation, pharmaceuticals and food processing. fdsfds
Download or read book XAFS for Everyone written by Scott Calvin and published by CRC Press. This book was released on 2013-05-20 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: XAFS for Everyone provides a practical, thorough guide to x-ray absorption fine-structure (XAFS) spectroscopy for both novices and seasoned practitioners from a range of disciplines. The text is enhanced with more than 200 figures as well as cartoon characters who offer informative commentary on the different approaches used in XAFS spectroscopy. The book covers sample preparation, data reduction, tips and tricks for data collection, fingerprinting, linear combination analysis, principal component analysis, and modeling using theoretical standards. It describes both near-edge (XANES) and extended (EXAFS) applications in detail. Examples throughout the text are drawn from diverse areas, including materials science, environmental science, structural biology, catalysis, nanoscience, chemistry, art, and archaeology. In addition, five case studies from the literature demonstrate the use of XAFS principles and analysis in practice. The text includes derivations and sample calculations to foster a deeper comprehension of the results. Whether you are encountering this technique for the first time or looking to hone your craft, this innovative and engaging book gives you insight on implementing XAFS spectroscopy and interpreting XAFS experiments and results. It helps you understand real-world trade-offs and the reasons behind common rules of thumb.
Download or read book Accelerated Materials Discovery written by Phil De Luna and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-02-21 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Typical timelines to go from discovery to impact in the advanced materials sector are between 10 to 30 years. Advances in robotics and artificial intelligence are poised to accelerate the discovery and development of new materials dramatically. This book is a primer for any materials scientist looking to future-proof their careers and get ahead of the disruption that artificial intelligence and robotic automation is just starting to unleash. It is meant to be an overview of how we can use these disruptive technologies to augment and supercharge our abilities to discover new materials that will solve world’s biggest challenges. Written by world leading experts on accelerated materials discovery from academia (UC Berkeley, Caltech, UBC, Cornell, etc.), industry (Toyota Research Institute, Citrine Informatics) and national labs (National Research Council of Canada, Lawrence Berkeley National Labs).
Download or read book Brilliant Light in Life and Material Sciences written by Vasili Tsakanov and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains an excellent overview of the status and highlights of brilliant light facilities and their applications in biology, chemistry, medicine, materials and environmental sciences. Overview papers on diverse fields of research by leading experts are accompanied by the highlights in the near and long-term perspectives of brilliant X-Ray photon beam usage for fundamental and applied research.
Download or read book Spectroscopic Methods in Mineralogy and Material Sciences written by Grant Henderson and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-11-21 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopic Methods in Mineralogy and Material Science covers significant advances in the technological aspects and applications of spectroscopic and microscopic techniques used in the Earth and Materials Sciences. The current volume compliments the now classic Volume 18, Spectroscopic Methods in Mineralogy and Geology, which became an essential resource to many scientists and educators for the past two decades. This volume updates techniques covered in Volume 18, and introduces new techniques available for probing the secrets of Earth materials, such as X-ray Raman and Brillouin spectroscopy. Other important topics including Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM) are also covered.
Download or read book Handbook of Materials Characterization written by Surender Kumar Sharma and published by Springer. This book was released on 2018-09-18 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the widely used experimental techniques available for the structural, morphological, and spectroscopic characterization of materials. Recent developments in a wide range of experimental techniques and their application to the quantification of materials properties are an essential side of this book. Moreover, it provides concise but thorough coverage of the practical and theoretical aspects of the analytical techniques used to characterize a wide variety of functional nanomaterials. The book provides an overview of widely used characterization techniques for a broad audience: from beginners and graduate students, to advanced specialists in both academia and industry.
