Download or read book X band Klystrons as a Power Source of the Next Linear Collider written by Hajime Mizuno and published by . This book was released on 1994 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 50 MW X band Klystron Sources for the Next Generation of Linear Colliders written by and published by . This book was released on 1994 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first in a new series of high-power pulsed klystrons has been tested with the following results: Frequency = 11.4 GHz, beam voltage = 415 kV, power output = 51 MW, pulse length = 1.5 [mu]s, and efficiency = 37%. Several tubes of this type will be used in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The rf performance of the klystron, which employs a standing-wave extended-interaction output circuit, is closely approximated by simulations performed with the SLAC CONDOR code. The same code predicts considerably higher efficiency, using a traveling-wave output circuit. A klystron with such a circuit will be constructed in the future. Another klystron is also planned in which beam confinement is accomplished by a periodic permanent magnet (PPM) stack, for which simulations also predict good performance.

Download or read book Current Status of the Next Linear Collider X Band Klystron Development Program written by C. Pearson and published by . This book was released on 2005 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: Klystrons capable of driving accelerator sections in the Next Linear Collider (NLC) have been developed at SLAC during the last decade. In addition to fourteen 50 MW solenoid-focused devices and a 50 MW Periodic Permanent Magnet focused (PPM) klystron, a 500 kV 75 MW PPM klystron was tested in 1999 to 80 MW with 3 {micro}s pulses, but very low duty. Subsequent 75 MW prototypes aimed for low-cost manufacture by employing reusable focusing structures external to the vacuum, similar to a solenoid electromagnet. During the PPM klystron development, several partners (CPI, EEV and Toshiba) have participated by constructing partial or complete PPM klystrons. After early failures during testing of the first two devices, SLAC has recently tested this design (XP3-3) to the full NLC specifications of 75 MW, 1.6 {micro}s pulse length, and 120 Hz. This 14.4 kW average power operation came with an efficiency of 50%. The XP3-3 average and peak output power, together with the focusing method, arguably makes it the most advanced high power klystron ever built anywhere in the world. Design considerations and test results for these latest prototypes will be presented.

Download or read book High Energy Density and High Power RF written by David K. Abe and published by Springer Science & Business Media. This book was released on 2006-01-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the seventh in a series of international workshops on high-power and high-energy density microwave devices for accelerator, plasma physics, and defense applications. The scope of this workshop included accelerators for high energy physics, plasma heating and current drive in controlled thermonuclear fusion research, radar and directed energy/high power microwave systems, THz sources and technologies, and advanced 2D/3D computational tool development.

Download or read book Pulsed RF Sources for Linear Colliders written by Richard Clinton Fernow and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book X BAND KLYSTRON DEVELOPMENT AT SLAC written by and published by . This book was released on 2009 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of X-band klystrons at SLAC originated with the idea of building an X-band Linear Collider in the late 1980's. Since then much effort has been expended in developing a reliable X-band Power source capable of delivering>50 MW RF power in pulse widths>1.5 [mu]s. I will report on some of the technical issues and design strategies which have led to the current SLAC klystron designs.

Download or read book Microwave and RF Vacuum Electronic Power Sources written by Richard G. Carter and published by Cambridge University Press. This book was released on 2018-04-12 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Do you design and build vacuum electron devices, or work with the systems that use them? Quickly develop a solid understanding of how these devices work with this authoritative guide, written by an author with over fifty years of experience in the field. Rigorous in its approach, it focuses on the theory and design of commercially significant types of gridded, linear-beam, crossed-field and fast-wave tubes. Essential components such as waveguides, resonators, slow-wave structures, electron guns, beams, magnets and collectors are also covered, as well as the integration and reliable operation of devices in microwave and RF systems. Complex mathematical analysis is kept to a minimum, and Mathcad worksheets supporting the book online aid understanding of key concepts and connect the theory with practice. Including coverage of primary sources and current research trends, this is essential reading for researchers, practitioners and graduate students working on vacuum electron devices.

Download or read book X band Klystrons for Japan Linear Collider written by H. Mizuno and published by . This book was released on 1994 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book European Particle Accelerator Conference Epac 94 In 3 Volumes written by Christine Petit-jean-genaz and published by World Scientific. This book was released on 1994-11-26 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings aim to provide a comprehensive overview of research, technology and applications in the field of accelerators. Contributions from the entire field of accelerators are presented, including low and high energy machines, and medical and industrial accelerators.

Download or read book Beam Line written by and published by . This book was released on 1990 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book X Band Klystron Development at the Stanford Linear Accelerator Center written by and published by . This book was released on 2000 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-band klystrons capable of 75 MW and utilizing either solenoidal or Periodic Permanent Magnet (PPM) focusing are undergoing design, fabrication and testing at the Stanford Linear Accelerator Center (SLAC). The klystron development is part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). SLAC has completed a solenoidal-focused X-band klystron development effort to study the design and operation of tubes with beam microperveances of 1.2. As of early 2000, nine 1.2[mu]K klystrons have been tested to 50 MW at 1.5[mu]s. The first 50 MW PPM klystron, constructed in 1996, was designed with a 0.6 [mu]K beam at 465 kV and uses a 5-cell traveling-wave output structure. Recent testing of this tube at wider pulsewidths has reached 50 MW at 55% efficiency, 2.4[mu]s and 60 Hz. A 75 MW PPM klystron prototype was constructed in 1998 and has reached the NLC design target of 75 MW at 1.5 [mu]s. A new 75 MW PPM klystron design, which is aimed at reducing the cost and increasing the reliability of multi-megawatt PPM klystrons, is under investigation. The tube is scheduled for testing during early 2001.

Download or read book The Department of Energy s FY 1997 Budget Request for the Office of Energy Research OER written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 1996 with total page 1348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Periodic Permanent Magnet Development for Linear Collider X band Klystrons written by and published by . This book was released on 1998 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Stanford Linear Accelerator Center (SLAC) klystron group is currently designing, fabricating and testing 11.424 GHz klystrons with peak output powers from 50 to 75 MW at 1 to 2 [mu]s rf pulsewidths as part of an effort to realize components necessary for the construction of the Next Linear Collider (NLC). In order to eliminate the projected operational-year energy bill for klystron solenoids, Periodic Permanent Magnet (PPM) focusing has been employed on the latest X-band klystron designs. A PPM beam tester has operated at the same repetition rate, voltage and average beam power required for a 75 MW NLC klystron. Prototype 50 and 75 MW PPM klystrons were built and tested during 1996 and 1997 which operate from 50 to 70 MW at efficiencies greater than 55%. Construction and testing of 75 MW research klystrons will continue while the design and reliability is perfected. This paper discusses the design of these PPM klystrons and the results of testing to date along with future plans for the development of a low-cost Design for Manufacture (DFM) 75 MW klystron and invitation for industry participation.

Download or read book Design of a 50 MW Klystron at X band written by and published by . This book was released on 1995 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper describes the design and performance of the XL-1 klystron; a 50 MW klystron operating at a frequency of 11.424 GHz for use on the SLAC Next Linear Collider Test Accelerator (NLCTA). Problems associated with the development of high-power rf sources for NLC, and the solutions implemented on XL-1 are discussed.

Download or read book Generation and Application of High Power Microwaves written by R.A Cairns and published by CRC Press. This book was released on 2020-08-17 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written at the graduate level, Generation and Application of High Power Microwaves discusses the basic physics of the generation of microwave and radiofrequency waves in the megawatt power range and the application of these ideas to a range of devices such as klystrons, gyrotrons, and free electron lasers. The book also contains chapters covering the transmission of the power through waveguides and the problems associated with mode conversion in transmission lines. The main application area covered is the heating and current drive in tokamaks and other devices for research into controlled nuclear fusion. Other applications of high power microwave technology are not neglected, and among those discussed are multiple charged ion and soft x-ray sources, electron spin resonance spectroscopy, advanced materials processing, millimeter wave radar, and supercolliders.

Download or read book X band Klystron for Japan Linear Collider written by H. Mizuno and published by . This book was released on 1990 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Future Physics And Accelerators written by Katri Huitu and published by World Scientific. This book was released on 1995-08-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an overview of present and future particle accelerator experiments, and also of astroparticle physics experiments. Relevant physics is discussed in detail in theoretical contributions.