Download or read book X band Antenna for CubeSat Satellite written by Joana Maria Llull Coll and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This project describes the process of design and manufacturing of an X-Band (7.1-8.5 GHz) antenna for a CubeSat satellite, facing many of the design criteria and challenges of pico-satellites. A CubeSat is a type of miniaturized satellite for space research that is made up of multiples of 10×10×10 cm cubic units and has a mass of no more than 1.33 kilograms per unit. It can be manufactured using commercial off-the-shelf (COTS) components for its electronics and structure. Limited size, low mass, circular polarization, high gain and wide bandwidth are the main challenges of the antenna design. A design of an aperture-coupled patch antenna has been performed to overcome the difficulties and fulfill all the requirements for CubeSats antennas. The antenna consists of one or two rectangular patches, fed by a microstrip line through a crossed slot in the ground plane. The two patches are separated from the ground plane using a layer of hard, low-permittivity foam. After the study of several antenna models, a stacked patch antenna (two patches) accomplished most of the requirements. The antenna models have been simulated using a 3-D electromagnetic simulation software, HFSS. Simulation and measured results show a gain within 6-10dB, very good circular polarization, a good matching in the whole frequency band and accomplish dimension criterias for CubeSat antennas.

Download or read book CubeSat Antenna Design written by Nacer Chahat and published by John Wiley & Sons. This book was released on 2021-01-07 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of CubeSat antennas designed at the Jet Propulsion Laboratory (JPL) CubeSats—nanosatellites built to standard dimensions of 10cm x 10 cm x cm—are making space-based Earth science observation and interplanetary space science affordable, accessible, and rapidly deployable for institutions such as universities and smaller space agencies around the world. CubeSat Antenna Design is an up-to-date overview of CubeSat antennas designed at NASA’s Jet Propulsion Laboratory (JPL), covering the systems engineering knowledge required to design these antennas from a radio frequency and mechanical perspective. This authoritative volume features contributions by leading experts in the field, providing insights on mission-critical design requirements for state-of-the-art CubeSat antennas and discussing their development, capabilities, and applications. The text begins with a brief introduction to CubeSats, followed by a detailed survey of low-gain, medium-gain, and high-gain antennas. Subsequent chapters cover topics including the telecommunication subsystem of Mars Cube One (MarCO), the enabling technology of Radar in a CubeSat (RainCube), the development of a one-meter mesh reflector for telecommunication at X- and Ka-band for deep space missions, and the design of multiple metasurface antennas. Written to help antenna engineers to enable new CubeSate NASA missions, this volume: Describes the selection of high-gain CubeSat antennas to address specific mission requirements and constraints for instruments or telecommunication Helps readers learn how to develop antennas for future CubeSat missions Provides key information on the effect of space environment on antennas to inform design steps Covers patch and patch array antennas, deployable reflectarray antennas, deployable mesh reflector, inflatable antennas, and metasurface antennas CubeSat Antenna Design is an important resource for antenna/microwave engineers, aerospace systems engineers, and advanced graduate and postdoctoral students wanting to learn how to design and fabricate their own antennas to address clear mission requirements.

Download or read book Antenna Design for CubeSats written by Reyhan Baktur and published by Artech House. This book was released on 2021-12-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: A CubeSat is a miniaturized modular satellite that can be constructed from off-the-shelf components. With advancements in digital signal processing, power electronics, and packaging technology, it is feasible to fit science instruments and communication devices that were traditionally carried on larger satellites on CubeSat consolations. This not only reduces mission cost, repair, risk, but also provides more precise and real-time science data. Their low cost and versatility allow for CubeSats to be used to test technologies that are planned to use on larger satellites, to collect point-to-point data in space when launched as CubeSat constellations, or to monitor health of larger spacecrafts. This comprehensive reference explores CubeSat standards, launching methods, and detailed design guidelines for antennas specially made for CubeSat applications. Deployed CubeSat antennas, such as low gain antennas, high gain wire-based antennas, and horn and dish antennas as they relate to the technology are explored. Conformal CubeSat Antennas, including those that are independent of CubeSats and those integrated in CubeSat solar panels, are discussed. An antenna design guideline is provided to demonstrate the basics of a CubeSat link budget, which is transitionally published in signal and system community. Written by an expert in the field, this book enables readers to read antenna specifics when choosing communication front-end.

Download or read book Printed Antennas for Wireless Communications written by Rod Waterhouse and published by John Wiley & Sons. This book was released on 2008-03-11 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printed antennas, also known as microstrip antennas, have a variety of beneficial properties including mechanical durability, conformability, compactness and cheap manufacturing costs. As such, they have a range of applications in both the military and commercial sectors, and are often mounted on the exterior of aircraft and spacecraft as well as incorporated into mobile radio communication devices. Printed Antennas for Wireless Communications offers a practical guide to state-of-the-art printed antenna technology used for wireless systems. Contributions from renowned global experts within both academia and industry enable the reader to design printed antennas and associated technologies, and offer valuable insights into important breakthroughs in these areas. Divided into 3 sections covering fundamental wideband printed radiating elements for wireless systems, small printed antennas for wireless systems, and advanced concepts and applications in wireless systems. Provides experimental data and applies theoretical models to present design performance trends and to give the reader an in-depth coverage of the area. Presents summaries of different approaches used in solving wireless systems such as WPAN (wireless personal area network) and MIMO (multi-input/ multi-output), offering the reader an overall perspective of the pros and cons of each. Focuses on practical design, examples and ‘real world’ solutions. Printed Antennas for Wireless Communications offers an excellent insight on printed antennas from the theoretical to the practical; hence it will appeal to practicing design engineers within commercial and governmental/ military organistations, as well as postagraduate students and researchers in communications technology

Download or read book Design of Spiral Antenna Array and Communication System for X band CubeSat in Lunar Orbit written by Katelyn Isbell and published by . This book was released on 2020 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in the design of CubeSats, a type of nanosatellite, have allowed missions to include lunar, asteroid, and planetary destinations. Communication for deep space CubeSats poses new challenges for researchers in terms of transmitting and receiving range capabilities, reliability, and power and size limitations. An X-band downlink communication system is designed to address link budget and CubeSat system requirements for a lunar orbit. An Archimedean spiral antenna array backed by a novel sloped wall cavity and fed with a Klopfenstein impedance taper and power splitter is designed and characterized. An X-band transmitter is designed to fulfill the link budget and is analyzed for RF performance.

Download or read book Electromagnetic Characterizations of Mesh Deployable Ka Band Reflector Antennas for Emerging CubeSats written by Vignesh Manohar and published by . This book was released on 2016 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: CubeSats are a miniaturized class of satellites that are launched as secondary payloads, offering the possibility of carrying out advanced space missions at affordable costs. Mechanical constraints and limited power onboard have limited current antenna implementations to low-gain, low data rate, and near-omnidirectional patterns. Integrating high gain aperture antennas with CubeSats can offer innumerable possibilities for advanced space missions. However, packaging large apertures into the small CubeSat form factor presents a formidable challenge to the scientific community. This thesis investigates the potential of integrating a 1m offset mesh deployable reflector antenna system with a 2.5U (10cmx10cmx25cm) CubeSat chassis for Ka band remote sensing or communications. Packaging such a large aperture into the small 2.5U volume necessitates a completely customized reflector design for our application. A detailed study of deployable umbrella mesh reflectors, RF analysis of various reflector antenna configurations and feed design methodologies are included in this work. These particular studies not only demonstrate the feasibility of the next high-gain antenna; they mark a major milestone (a 1m antenna size) for CubeSats, which is among the largest to be utilized for Ka band.

Download or read book Handbook of Small Satellites written by Joseph N. Pelton and published by Springer. This book was released on 2020-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.

Download or read book Introduction to Antennas and RF Propagation Analysis written by Dean James Friesen and published by Artech House. This book was released on 2021-12-31 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical text gives engineers and technicians at all levels an easy-to-follow entry point into the subject of RF/EM wave propagation and antennas. While aimed primarily at those who are entering the field or transitioning from a related field, the book also helps experienced professionals obtain a more refined understanding of the various methodologies and processes in this area. The book covers the essentials, practices, technical details, and considerations needed to help a team of engineers design, install, and/or predict the technical performance of a new (or even existing) one-way, two-antenna (long radiating distance) RF communication system. The chapters are organized logically to walk you step by step through the application processes, showing you proven methods to bring about top performance, while also helping you factor in unanticipated variances, including those caused by the earth itself, earth’s gaseous atmosphere, rain, snow, hail, ice, ionospheric signal attenuation, and EM waves. This kind of understanding and consideration saves time, money, and much frustration in a project. With this book in hand, you will better understand RF/EM wave propagation and the technical vernacular used to describe it; become familiar with the various processes and considerations in analyzing, designing, and predicting the performance of new and existing antenna RF communications systems; and more confidently approach problem solving and possible solutions for reducing signal interference and loss. The chapter contents, while not sparing the reader exposure to radiated RF system design and analysis terminology, are written in a relaxed, conversational tone and easy-to-understand manner, making this a perfect learning tool for those entering or transitioning to this field, as well as an excellent supplement or foundational text for an instructional course. The book’s logically organized and easy-to-access chapter structure also facilitates its use as a bench reference for quick lookup or review.

Download or read book 40TH GISFI STANDARDIZATION SERIES MEETING JOINTLY WITH INTERNATIONAL CONFERENCE ON 6G AND WIRELESS NETWORK TECHNOLOGIES written by Kolhapur Institute of Technology’s College of Engineering (Autonomous) and published by Book Rivers. This book was released on 2023-07-07 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Energy Empowerment in Smart and Resilient Cities written by Mustapha Hatti and published by Springer Nature. This book was released on 2019-12-24 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Conference on Artificial Intelligence in Renewable Energetic Systems, IC-AIRES2019, 26-28 November 2019, Taghit-Bechar, Algeria. The challenges of the energy transition in the medium term lead to numerous technological breakthroughs in the areas of production, optimal distribution and the rational use of energy and renewable energy (energy efficiency and optimization of consumption, massive electrification, monitoring and control energy systems, cogeneration and energy recovery processes, new and renewable energies, etc.). The fall in the cost of renewable energies and the desire for a local control of energy production are today calling for a profound change in the electricity system. Local authorities are at the center of energy developments by taking into account the local nature of certain energy systems, heat networks, geothermal energy, waste heat recovery, and electricity generation from household waste. On the other side, digital sciences are at the heart of connected objects and intelligent products that combine information processing and communication capabilities with their environment. Digital technology is at the center of new systems engineering approaches (3D modeling, virtualization, simulation, digital prototyping, etc.) for the design and development of intelligent systems. The book deals with various topics ranging from the design, development and maintenance of energy production systems, transport, distribution or storage of energy, optimization of energy efficiency, especially in the use of energy. innovation in the fields of energy production from renewable energies, management of energy networks: electricity, fluids, gas, district heating, energy storage modes: battery, super-capacitors , overseeing energy supply through supervision, control and diagnosis, risk management, as well as the design and management of smart grids: microgrid, smartgrid. This imposes the model of energy empowerment in the advent of smart cities. Empower the world’s most vulnerable energy-poor citizens and establish growing and vibrant socioeconomic communities, by academics, students in engineering and data computing from around the world who have chosen an academic path leading to an electric power and energy engineering and artificial intelligence to advancing technology for the advantage of humanity.

Download or read book CubeSat Handbook written by Chantal Cappelletti and published by Academic Press. This book was released on 2020-09-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: CubeSat Handbook: From Mission Design to Operations is the first book solely devoted to the design, manufacturing, and in-orbit operations of CubeSats. Beginning with an historical overview from CubeSat co-inventors Robert Twiggs and Jordi Puig-Suari, the book is divided into 6 parts with contributions from international experts in the area of small satellites and CubeSats. It covers topics such as standard interfaces, on-board & ground software, industry standards in terms of control algorithms and sub-systems, systems engineering, standards for AITV (assembly, integration, testing and validation) activities, and launch regulations. This comprehensive resource provides all the information needed for engineers and developers in industry and academia to successfully design and launch a CubeSat mission. Provides an overview on all aspects that a CubeSat developer needs to analyze during mission design and its realization Features practical examples on how to design and deal with possible issues during a CubeSat mission Covers new developments and technologies, including ThinSats and PocketQubeSats

Download or read book Microelectronics Electromagnetics and Telecommunications written by P. Satish Rama Chowdary and published by Springer Nature. This book was released on 2020-06-24 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developments and outlines future trends in the fields of microelectronics, electromagnetics and telecommunication. It includes original research presented at the International Conference on Microelectronics, Electromagnetics and Telecommunication (ICMEET 2019), organized by the Department of ECE, Raghu Institute of Technology, Andhra Pradesh, India. Written by scientists, research scholars and practitioners from leading universities, engineering colleges and R&D institutes around the globe, the papers share the latest breakthroughs in and promising solutions to the most important issues facing today’s society.

Download or read book Circularly Polarized Antennas written by Steven Shichang Gao and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive insight into the design techniques for different types of CP antenna elements and arrays In this book, the authors address a broad range of topics on circularly polarized (CP) antennas. Firstly, it introduces to the reader basic principles, design techniques and characteristics of various types of CP antennas, such as CP patch antennas, CP helix antennas, quadrifilar helix antennas (QHA), printed quadrifilar helix antennas (PQHA), spiral antenna, CP slot antennas, CP dielectric resonator antennas, loop antennas, crossed dipoles, monopoles and CP horns. Advanced designs such as small-size CP antennas, broadband, wideband and ultra-wideband CP antennas are also discussed, as well as multi-band CP antennas and dual CP antennas. The design and analysis of different types of CP array antennas such as broadband CP patch arrays, dual-band CP arrays, CP printed slot arrays, single-band and multi-band CP reflectarrays, high-gain CP waveguide slot antennas, CP dielectric resonator antenna arrays, CP active arrays, millimetre-waveband CP arrays in LTCC, and CP arrays with electronically beam-switching or beam-steering capabilities are described in detail. Case studies are provided to illustrate the design and implementation of CP antennas in practical scenarios such as dual-band Global Navigation Satellite Systems (GNSS) receivers, satellite communication mobile terminals at the S-band, Radio Frequency Identification (RFID) readers at 2.4 GHz, and Ka-band high-speed satellite communication applications. It also includes the detailed designs for a wideband Logarithmic spiral antenna that can operate from 3.4-7.7 GHz. In addition, the book offers a detailed review of the recent developments of different types of CP antennas and arrays. Presents comprehensive discussions of design techniques for different types of CP antennas: small-size CP antennas, broadband CP antennas, multi-band CP antennas and CP arrays. Covers a wide range of antenna technologies such as microstrip antennas, helix, quadrifilar helix antenna, printed quadrifilar helix antenna, dielectric resonator antennas, printed slots, spiral antennas, monopoles, waveguide slot arrays, reflectarrays, active arrays, millimetre-wave arrays in LTCC, electronically beam-switching arrays and electronically beam-steerable arrays. Reviews recent developments in different types of CP antennas and arrays, reported by industries, researchers and academics worldwide. Includes numerous case studies to demonstrate how to design and implement different CP antennas in practical scenarios. Provides both an introduction for students in the field and an in-depth reference for antenna/RF engineers who work on the development of CP antennas. Circularly Polarized Antennas will be an invaluable guide for researchers in R&D organizations; system engineers (antenna, telecom, space and satellite); postgraduates studying the subjects of antenna and propagation, electromagnetics, RF/microwave/millimetre-wave systems, satellite communications and so on; technical managers and professionals in the areas of antennas and propagation.

Download or read book Achieving Science with CubeSats written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-11-06 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space-based observations have transformed our understanding of Earth, its environment, the solar system and the universe at large. During past decades, driven by increasingly advanced science questions, space observatories have become more sophisticated and more complex, with costs often growing to billions of dollars. Although these kinds of ever-more-sophisticated missions will continue into the future, small satellites, ranging in mass between 500 kg to 0.1 kg, are gaining momentum as an additional means to address targeted science questions in a rapid, and possibly more affordable, manner. Within the category of small satellites, CubeSats have emerged as a space-platform defined in terms of (10 cm x 10 cm x 10 cm)- sized cubic units of approximately 1.3 kg each called "U's." Historically, CubeSats were developed as training projects to expose students to the challenges of real-world engineering practices and system design. Yet, their use has rapidly spread within academia, industry, and government agencies both nationally and internationally. In particular, CubeSats have caught the attention of parts of the U.S. space science community, which sees this platform, despite its inherent constraints, as a way to affordably access space and perform unique measurements of scientific value. The first science results from such CubeSats have only recently become available; however, questions remain regarding the scientific potential and technological promise of CubeSats in the future. Achieving Science with CubeSats reviews the current state of the scientific potential and technological promise of CubeSats. This report focuses on the platform's promise to obtain high- priority science data, as defined in recent decadal surveys in astronomy and astrophysics, Earth science and applications from space, planetary science, and solar and space physics (heliophysics); the science priorities identified in the 2014 NASA Science Plan; and the potential for CubeSats to advance biology and microgravity research. It provides a list of sample science goals for CubeSats, many of which address targeted science, often in coordination with other spacecraft, or use "sacrificial," or high-risk, orbits that lead to the demise of the satellite after critical data have been collected. Other goals relate to the use of CubeSats as constellations or swarms deploying tens to hundreds of CubeSats that function as one distributed array of measurements.

Download or read book Space Antenna Handbook written by William A. Imbriale and published by John Wiley & Sons. This book was released on 2012-06-25 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses a broad range of topics on antennas for space applications. First, it introduces the fundamental methodologies of space antenna design, modelling and analysis as well as the state-of-the-art and anticipated future technological developments. Each of the topics discussed are specialized and contextualized to the space sector. Furthermore, case studies are also provided to demonstrate the design and implementation of antennas in actual applications. Second, the authors present a detailed review of antenna designs for some popular applications such as satellite communications, space-borne synthetic aperture radar (SAR), Global Navigation Satellite Systems (GNSS) receivers, science instruments, radio astronomy, small satellites, and deep-space applications. Finally it presents the reader with a comprehensive path from space antenna development basics to specific individual applications. Key Features: Presents a detailed review of antenna designs for applications such as satellite communications, space-borne SAR, GNSS receivers, science instruments, small satellites, radio astronomy, deep-space applications Addresses the space antenna development from different angles, including electromagnetic, thermal and mechanical design strategies required for space qualification Includes numerous case studies to demonstrate how to design and implement antennas in practical scenarios Offers both an introduction for students in the field and an in-depth reference for antenna engineers who develop space antennas This book serves as an excellent reference for researchers, professionals and graduate students in the fields of antennas and propagation, electromagnetics, RF/microwave/millimetrewave systems, satellite communications, radars, satellite remote sensing, satellite navigation and spacecraft system engineering, It also aids engineers technical managers and professionals working on antenna and RF designs. Marketing and business people in satellites, wireless, and electronics area who want to acquire a basic understanding of the technology will also find this book of interest.

Download or read book Spaceborne Antennas for Planetary Exploration written by William A. Imbriale and published by John Wiley & Sons. This book was released on 2006-08-04 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: JPL spacecraft antennas-from the first Explorer satellite in 1958 to current R & D Spaceborne Antennas for Planetary Exploration covers the development of Jet Propulsion Laboratory (JPL) spacecraft antennas, beginning with the first Explorer satellite in 1958 through current research and development activities aimed at future missions. Readers follow the evolution of all the new designs and technological innovations that were developed to meet the growing demands of deep space exploration. The book focuses on the radio frequency design and performance of antennas, but covers environmental and mechanical considerations as well. There is additionally a thorough treatment of all the analytical and measurement techniques used in design and performance assessment. Each chapter is written by one or more leading experts in the field of antenna technology. The presentation of the history and technology of spaceborne antennas is aided by several features: * Photographs and drawings of JPL spacecraft * Illustrations to help readers visualize concepts and designs * Tables highlighting and comparing the performance of the antennas * Bibliographies at the end of each chapter leading to a variety of primary and secondary source material This book complements Large Antennas of the Deep Space Network (Wiley 2002), which surveys the ground antennas covered in support of spacecraft. Together, these two books completely cover all JPL antenna technology, in keeping with the JPL Deep Space Communications and Navigation Series mission to capture and present the many innovations in deep space telecommunications over the past decades. This book is a fascinating and informative read for all individuals working in or interested in deep space telecommunications.

Download or read book Origami Antennas for Wireless Communication Systems written by Syed Imran Hussain Shah and published by Springer Nature. This book was released on with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: