Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2007 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume fully covers the syllabus for the NEBOSH Certificate in Construction Safety and Health. It has been updated in line with changes in legislation regarding fire safety, noise and vibration, work at height, construction design and control of hazardous substances.
Download or read book Asbestos written by Great Britain, Health and Safety Executive Staff and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book replaces most earlier HSE guidance on liscensed asbestos removal work. It is aimed at businesses holding a alicence to work with asbestos, either repairing or removing asbestos-containing materials (ACMs), supervising such work, holding an ancillary license or providing training on asbestos. Employers who carry out work with asbestos insulation, aasbestos insulating board using their own employees on their premises, who are exempted from the requirement to hold a licence, also need this guidance. The guidance is split into eight chapters, covering different aspects of licensed work with ACM's. It provides an overview of asbestos and its health effects, the law and how to work safely with asbestos.
Download or read book Principles of Health and Safety at Work written by Allan St John Holt and published by Routledge. This book was released on 2015-06-22 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint of ISBN 978-0-901-35743-4 Widely acknowledged as the one stop summary of health and safety fundamentals, Principles covers law, safety technology, occupational health and hygiene and safety management techniques. Originally written by the late international health and safety expert Allan St John Holt, this new edition has been comprehensively updated by Allan's colleague Jim Allen. The book is designed as a concise, accessible introduction to health and safety basics and includes revision notes and a wide range of references. It is a first class resource for NEBOSH Certificate students.
Download or read book Lees Loss Prevention in the Process Industries written by Frank Lees and published by Elsevier. This book was released on 2005-01-25 with total page 3708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last three decades the process industries have grown very rapidly, with corresponding increases in the quantities of hazardous materials in process, storage or transport. Plants have become larger and are often situated in or close to densely populated areas. Increased hazard of loss of life or property is continually highlighted with incidents such as Flixborough, Bhopal, Chernobyl, Three Mile Island, the Phillips 66 incident, and Piper Alpha to name but a few. The field of Loss Prevention is, and continues to, be of supreme importance to countless companies, municipalities and governments around the world, because of the trend for processing plants to become larger and often be situated in or close to densely populated areas, thus increasing the hazard of loss of life or property. This book is a detailed guidebook to defending against these, and many other, hazards. It could without exaggeration be referred to as the "bible" for the process industries. This is THE standard reference work for chemical and process engineering safety professionals. For years, it has been the most complete collection of information on the theory, practice, design elements, equipment, regulations and laws covering the field of process safety. An entire library of alternative books (and cross-referencing systems) would be needed to replace or improve upon it, but everything of importance to safety professionals, engineers and managers can be found in this all-encompassing reference instead. Frank Lees' world renowned work has been fully revised and expanded by a team of leading chemical and process engineers working under the guidance of one of the world’s chief experts in this field. Sam Mannan is professor of chemical engineering at Texas A&M University, and heads the Mary Kay O’Connor Process Safety Center at Texas A&M. He received his MS and Ph.D. in chemical engineering from the University of Oklahoma, and joined the chemical engineering department at Texas A&M University as a professor in 1997. He has over 20 years of experience as an engineer, working both in industry and academia. New detail is added to chapters on fire safety, engineering, explosion hazards, analysis and suppression, and new appendices feature more recent disasters. The many thousands of references have been updated along with standards and codes of practice issued by authorities in the US, UK/Europe and internationally. In addition to all this, more regulatory relevance and case studies have been included in this edition. Written in a clear and concise style, Loss Prevention in the Process Industries covers traditional areas of personal safety as well as the more technological aspects and thus provides balanced and in-depth coverage of the whole field of safety and loss prevention. * A must-have standard reference for chemical and process engineering safety professionals * The most complete collection of information on the theory, practice, design elements, equipment and laws that pertain to process safety * Only single work to provide everything; principles, practice, codes, standards, data and references needed by those practicing in the field
Download or read book Asbestos and Man made Mineral Fibres in Buildings written by Medical Research Council (Great Britain). Institute for Environment and Health and published by Thomas Telford. This book was released on 1999 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Key points - Introduction - What are asbestos and man-made mineral fibres? - Where are these materials used? - What are the risks to health? - How to identify and assess materials containing mineral fibres - How to manage fibrous materials in buildings - Advice on problems involving asbestos - Disposal of asbestos waste - Common questions and answers
Download or read book Asbestos Essentials written by Hse and published by . This book was released on 2008 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Health and Safety at Work written by Phil Hughes MBE and published by Routledge. This book was released on 2015-08-27 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Health and Safety at Work covers the fundamentals of occupational safety and health for the thousands of students who complete the NEBOSH National General Certificate in Occupational Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, this sixth edition provides students with all they need to tackle the course with confidence. The highly illustrated content covers all of the essential elements of health and safety management, the legal framework, risk assessment and control standards and also includes checklists, report forms and record sheets to supplement learning. Aligned to the NEBOSH National General Certificate in Occupational Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes Written by renowned authors, the Introduction to Health and Safety at Work is also a handy reference for managers and directors dealing with the day-to-day issues of health and safety and is of great value to those studying for level 3 N/SVQ and the NEBOSH National Diploma.
Download or read book Health and Safety Enforcement written by Richard A. Matthews (barrister.) and published by Oxford University Press, USA. This book was released on 2010-10-21 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides a practical and comprehensive guide to the key issues in this growing area of the law. This edition contains expanded coverage of judicial review and abuse of process, 'reasonable practicability'; disclosure; case management; funding; and the Corporate Manslaughter Act.
Download or read book Health Safety and Environment Legislation written by Edward Rowland and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The laws relating to the environment and health and safety have become so closely interrelated that the previous edition of the Pocket Guide to Environmental Law has been completely revised, updated and enlarged to include Health and Safety Law. The resulting Health, Safety and Environment Legislation: A Pocket Guide is divided into 17 sections, each of which is subdivided, with the relevant legislation easily identified within the sections. A list of contents and an index are also included. All material is current as of November 2002, and includes recently introduced legislation such as CHIP 3, GMOs (Deliberate Release), Control of Asbestos at Work, COSHH and Control of Lead at Work. This guide will be useful to all employers and employees, but especially so to those employed to advise their colleagues on health, safety and environmental law. It is therefore designed to be a first port-of-call for quick and easy access to reference information, which can readily be carried to meetings or taken out on site.
Download or read book Tunnelling Contracts and Site Investigation written by Dr P.B. Attewell and published by CRC Press. This book was released on 1995-08-31 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wide ranging and up-to-date review of experience of tunnelling contracts, particularly those for sewerage and drainage tunnels. The review is based on the 6th edition of the ICE Conditions of Contract, but it takes note of new forms of contract which are leading towards less adversarial contractual relations.^
Download or read book Introduction to Health and Safety at Work written by Phil Hughes and published by Routledge. This book was released on 2011-12-31 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn more about health and safety with this NEBOSH-endorsed textbook, written and designed specifically to help you pass your course. Matched to the NEBOSH National General Certificate in Occupational Health and Safety Practice NEBOSH questions and sample answers based on recent examinations at the end of each chapter allow you to test your knowledge and increase your understanding All relevant legislation is summarised for quick reference Introduction to Health and Safety at Work, 5th edition covers the basics of occupational safety and health. The book is the definitive handbook to the National General Certificate in Occupational Health and Safety from NEBOSH with each element of the syllabus explained in detail. To make studying easier, each chapter starts with learning outcomes and ends with questions taken from recent NEBOSH examinations. Specimen answers and a study skills chapter aid exam preparation. It is highly illustrated with over 60 new diagrams and photographs in full colour making learning easy for all. There is a companion website with editable training slides and illustrations to help tutors deliver health and safety courses. This book is a handy reference for managers and directors dealing with the day-to-day issues of health and safety and is also of great value to those studying for level 3 N/SVQ and the IOSH Managing Safely Award. It covers all the essential elements of health and safety management, the legal framework, risk assessment and control standards and includes checklists, report forms and record sheets. In addition, useful topics outside the syllabus have been included and an additional chapter to cover other aspects of health and safety and related topics that many readers will find helpful on completion of the course – construction activities, environmental considerations and international issues New in this edition: Fully restructured in line with new 2010 NEBOSH syllabus Inclusion of a summary of the Report on Health and Safety ‘Common Sense Common Safety’ by Lord Young Gives particular regard to changes in legislation relating to the Site Waste Management Plans Regulations, the Control of Artificial Radiation at Work Regulations, Chemicals (Hazard Information and Packaging for Supply) Regulations (CHIP4) and the European Classification, Packaging and labelling regulations A chapter with guidance on searching the internet with a range of significant Occupational health and Safety Websites. There are dozens of internet references throughout the book Since the Practical Application NGC3 has been significantly revised, Chapter 20 includes a sample practical application based on the new scope and format Phil Hughes MBE, MSc, CFIOSH, is a former Chairman of NEBOSH (1995-2001), former President of IOSH (1990-1991) and runs his own consultancy. He received an MBE for services to health & safety and as a director of RoSPA, in the New Years Honours List 2005. Ed Ferrett PhD, BSc (Hons Eng), CEng, MIMechE, MIET, CMIOSH, is a former Vice Chairman of NEBOSH (1999-2008) and a lecturer on NEBOSH courses at Cornwall Business School of Cornwall College. He is a Chartered Engineer and a health and safety consultant.
Download or read book Clay s Handbook of Environmental Health written by Stephen Battersby and published by Routledge. This book was released on 2016-07-01 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay’s Handbook of Environmental Health, since its first publication in 1933, has provided a definitive guide for the environmental health practitioner, or reference for the consultant or student. This 21th edition continues as a first point of reference, reviewing the core principles, techniques and competencies, and then outlining the specialist subjects. It has been refocused on the current curriculum of the UK’s Chartered Institute of Environmental Health but should also readily suit the generalist or specialist working outside the UK.
Download or read book Construction Safety Handbook written by V. J. Davies and published by Thomas Telford. This book was released on 1996 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an essential guide for all construction industry professionals, whose duty it is to preserve the health, safety and welfare of others by effective design and management.The authors describe the most common hazards of construction work and how to reduce the consequent risks. They explain the essential details of construction safety law, the organisational basis for implementing health and safety policies, and duties under current safety regulations.This edition has been fully revised to incorporate developments in construction methods and new legislative requirements.
Download or read book Health and Safety Questions and Answers written by Pat Perry and published by Thomas Telford. This book was released on 2003 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health and safety requirements, Health and safety management, Occupational safety, Management, Safety measures, Legislation, Building and Construction
Download or read book Residential Property Appraisal written by Phil Parnham and published by Taylor & Francis. This book was released on 2022-11-30 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Residential Property Appraisal, Volumes 1 and 2, are handbooks not only for students studying residential surveying but also for those involved in the appraisal of residential property. Volume 1 has been updated and covers the valuation process as it relates to residential properties, particularly when valuation is undertaken for secured lending purposes. It addresses the basic skills required, the risks posed in a valuation, the key drivers of value, emerging issues that impact valuation and the key legal and RICS regulatory considerations that a valuer needs to understand. Volume 2 of the series goes on to consider the practical aspects of the survey and inspection of residential properties in more detail. Not only does this include updated sections on the most common defects (for example, building movement, moisture problems, wood rot and wood-boring insects), it also covers emerging challenges, including assessing personal safety hazards, modern construction technologies and materials and invasive plants. The volume also takes account of the Home Survey Standard recently published by the RICS and the changes resulting from climate change, the energy crisis and concerns about fire safety. Building services in domestic residential properties is another area of rapid change, especially with the development of low-carbon and renewable technologies. To ensure that this aspect is covered in sufficient detail, the content is to be included in Volume 3: Assessing Building Services. An essential book for students studying to enter the residential survey and valuation profession and for existing practitioners who wish to improve their knowledge of current practices.
Download or read book Principles of Construction Safety written by Allan St John Holt and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry has not had a good record on health and safety and faces tough legal and financial penalties for breaches of the law. This book provides a unique resource for all those who construct or procure the construction of projects of all sizes and in all countries and for clients who need to keep abreast of their own and their contractors' responsibilities. It gives practical guidance on best practice, including: measuring performance and recording information developing a safety policy and method statements assessing risk training and understanding people the basics of the construction/environment interface The book addresses several topics not found in other reference works, discussing techniques of health and safety and basic environmental management as applied to the industry. It uniquely provides 50 quick reference guides setting out solutions to common problems. These include falls, manual and mechanical handling, work with asbestos and noise. It also summarises the main UK legal requirements on construction safety and health and includes a number of useful checklists and model forms. Written by a very experienced health and safety practitioner, who is also author of the highly successful IOSH book Principles of Health and Safety at Work, this book will be welcomed by all responsible for health and safety. It will also provide an excellent text for the NEBOSH (National Examination Board in Occupational Safety and Health) Construction Safety and Health national certificate.
