Download or read book Wood base panel products for pallet decks written by R. S. Kurtenacker and published by . This book was released on 1976 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Delamination in Wood Wood Products and Wood Based Composites written by Voichita Bucur and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last quarter century, delamination has come to mean more than just a failure in adhesion between layers of bonded composite plies that might affect their load-bearing capacity. Ever-increasing computer power has meant that we can now detect and analyze delamination between, for example, cell walls in solid wood. This fast-moving and critically important field of study is covered in a book that provides everyone from manufacturers to research scientists the state of the art in wood delamination studies. Divided into three sections, the book first details the general aspects of the subject, from basic information including terminology, to the theoretical basis for the evaluation of delamination. A settled terminology in this subject area is a first key goal of the book, as the terms which describe delamination in wood and wood-based composites are numerous and often confusing. The second section examines different and highly specialized methods for delamination detection such as confocal laser scanning microscopy, light microscopy, scanning electron microscopy and ultrasonics. Ways in which NDE (non-destructive evaluation) can be employed to detect and locate defects are also covered. The book’s final section focuses on the practical aspects of this defect in a wide range of wood products covering the spectrum from trees, logs, laminated panels and glued laminated timbers to parquet floors. Intended as a primary reference, this book covers everything from the microscopic, anatomical level of delamination within solid wood sections to an examination of the interface of wood and its surface coatings. It provides readers with the perspective of industry as well as laboratory and is thus a highly practical sourcebook for wood engineers working in manufacturing as well as a comprehensively referenced text for materials scientists wrestling with the theory underlying the subject.
Download or read book Lumber and Panel Products Consumption for Packaging and Shipping in the United States written by David B. McKeever and published by . This book was released on 1980 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Review of Wood based Panel Sector in United States and Canada written by Henry Spelter and published by . This book was released on 1997 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesives for the Composite Wood Panel Industry written by G. S. Koch and published by William Andrew. This book was released on 1987 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design in Wood written by Judith Stalnaker and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The prime purpose of this book is to serve as a design is of considerable value in helping the classroom text for the engineering or architec student make the transition from the often sim ture student. It will, however, also be useful to plistic classroom exercises to problems of the designers who are already familiar with design real world. Problems for solution by the student in other materials (steel, concrete, masonry) but follow the same idea. The first problems in each need to strengthen, refresh, or update their capa subject are the usual textbook-type problems, bility to do structural design in wood. Design but in most chapters these are followed by prob principles for various structural materials are lems requiring the student to make structural similar, but there are significant differences. planning decisions as well. The student may be This book shows what they are. required, given a load source, to find the magni The book has features that the authors believe tude of the applied loads and decide upon a set it apart from other books on wood structural grade of wood. Given a floor plan, the student design. One of these is an abundance of solved may be required to determine a layout of struc examples. Another is its treatment of loads. This tural members. The authors have used most of book will show how actual member loads are the problems in their classes, so the problems computed. The authors have found that students, have been tested.
Download or read book Modern Technology of Wood Veneer Plywood Particle Board Fibreboard Bamboo Forest Products written by EIRI Board and published by Engineers India Research In. This book was released on 2011 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book Modern Technology of Wood, Veneer, Plywood, Particle Board, Fibreboard, Bamboo & Forest Products covers Wood-The Energy Source, Wood Carbonisation, Saw Mill, Types of Saw, Timber Terminology, Saw Types, Circular Saw, Sawing Methods, Operations of Saw Mill, How do we Manage Wood Waste, Waste. The use of by-products in the forest products industries, Okoume (Aucoumea Klaineana) Chemical Seasoning of Round Bamboo, Some Tips on Use of Edge glued boards, Adhesives used for Wood Products, Lamination and Laminated Wood Products, Technology of Veneer and Plywood, Adhesives for Panel Products, Beech (Fagus Species), Prevention and Control of Powder post bore, Sandwich Boards, Manufacture of Particleboard and Composite Products, Fibreboard Technology, Manufacturing Technology of Pulp and Paper, Types of Flooring, Wenge (Millettia Laurentii), Kiln drying: Manual Versus Automatic, Phenol Formaldehyde Resin Emulsions as Wood Adhesives, Bamboo mat composites and moulded products, Shake and Shingle Industry Roofing Material, Processed Wood & Wood Products, Wood and Biomass Utilization, Forest Products, Bamboo Mat Board, Bamboo Mat Corrugated Sheets & Bamboo Floor Board, Bamboo Shoot, Cane & Bamboo Products
Download or read book Performance of Bio based Building Materials written by Dennis Jones and published by Woodhead Publishing. This book was released on 2017-07-07 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance of Bio-based Building Materials provides guidance on the use of bio-based building materials (BBBM) with respect to their performance. The book focuses on BBBM currently present on the European market. The state-of-the-art is presented regarding material properties, recommended uses, performance expectancies, testing methodology, and related standards. Chapters cover both 'old and traditional' BBBM since quite a few of them are experiencing a comeback on the market. Promising developments that could become commercial in the near future are presented as well. The book will be a valuable reference resource for those working in the bio-based materials research community, architects and agencies dealing with sustainable construction, and graduate students in civil engineering. - Takes a unique approach to bio-based materials and presents a broad overview of the topics on relevant areas necessary for application and promotion in construction - Contains a general description, notable properties related to performance, and applications - Presents standards that are structured according to performance types
Download or read book Laminated Wood based Composites written by John Youngquist and published by . This book was released on 1981 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Coatings written by Franco Bulian and published by Elsevier. This book was released on 2009-06-02 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood Coatings addresses the factors responsible for the performance of wood coatings in both domestic and industrial situations. The term 'wood coatings' covers a broad range of products including stains, varnishes, paints and supporting ancillary products that may be used indoors or outdoors. Techniques for coating wood go back many centuries but in recent decades there has been a move towards more environmentally-friendly materials, for example, the use of water-borne rather than solvent-borne chemicals. A major objective of Wood Coatings is to explain the underlying factors that influence selection, application and general operational issues. Basic information on the chemistry and technology of coatings is included for the benefit of students and laboratory technicians. Additionally, the book includes individual chapters of interest to architects, specifiers, and industrial users. - Offers up-to-date guidance on current availability and usage of wood coatings - Provides the reader with a basic understanding of both coating and substrate interactions - Covers both architectural (trade and DIY) and industrial sectors
Download or read book Wood Based Panels International written by and published by . This book was released on 2005 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third National Seminar on Wood Based Panel Products written by and published by . This book was released on 2002 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep and Creep rupture Behavior of Wood based Structural Panels written by Theodore Laufenberg and published by . This book was released on 1999 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper summarizes a cooperative research program between the USDA Forest Service, Forest Products Laboratory (FPL), in Madison, Wisconsin, and Forintek Canada Corp. in Vancouver, British Columbia, Canada. This research program provided detailed creep--rupture and some creep information for composite panel products. Commercially produced plywood, oriented strandboard (OSB), and minimally aligned waferboard were tested to identify nine mills (three for each product) that produced panels with a range of flexural creep performance. The three plywood, three OSB, and three waferboard products (nine products total, one from each mill) were then tested to provide information on their duration of load (DOL) and creep performance. Large panel specimens were subjected to both rampload and constant-load tests under one environmental condition. The constant-load results provided conventional or deterministic DOL factors that compared favorably with National Design Specifications recommended for adjusting lumber design strength properties under dry service conditions. Ramp-load specimen data generally indicated a lower rate of damage accumulation than did data for constant-load specimens. Creep tests at two low constant-load levels were also performed on large specimens under three environmental conditions for a 6-month period. Those results suggested that present deterministic creep factors in panel design practice might be acceptable for plywood under the influence of relatively severe conditions, for OSB in moderate conditions, and for waferboard in dry service environmental conditions.
Download or read book Accelerated Aging of Fiber Building Boards written by Daniel A. Jessup and published by . This book was released on 1938 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wood Polymer Composites written by K O Niska and published by Elsevier. This book was released on 2008-05-29 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood-polymer composites (WPC) are materials in which wood is impregnated with monomers that are then polymerised in the wood to tailor the material for special applications. The resulting properties of these materials, from lightness and enhanced mechanical properties to greater sustainability, has meant a growing number of applications in such areas as building, construction and automotive engineering. This important book reviews the manufacture of wood-polymer composites, how their properties can be assessed and improved and their range of uses.After an introductory chapter, the book reviews key aspects of manufacture, including raw materials, manufacturing technologies and interactions between wood and synthetic polymers. Building on this foundation, the following group of chapters discusses mechanical and other properties such as durability, creep behaviour and processing performance. The book concludes by looking at orientated wood-polymer composites, wood-polymer composite foams, at ways of assessing performance and at the range of current and future applications.With its distinguished editors and international team of contributors, Wood-polymer composites is a valuable reference for all those using and studying these important materials. - Provides a comprehensive survey of major new developments in wood-polymer composites - Reviews the key aspects of manufacture, including raw materials and manufacturing technologies - Discusses properties such as durability, creep behaviour and processing performance
Download or read book Formaldehyde written by Chan Bao Cheng and published by Nova Science Publishers. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Formaldehyde is a building block in the synthesis of many other compounds of specialised and industrial significance. It exhibits most of the chemical properties of other aldehydes but is more reactive. In this book, the authors discuss the chemistry, applications and role in polymerisation of formaldehyde. Topics discussed include the properties of urea-formaldehyde resins for wood-based composites; electronic spectra of formaldehyde in aqueous solution; decontamination of indoor air pollutants of formaldehyde through catalytic oxidation over oxide supported noble metal nanocatalysts; indoor air monitoring using newly developed formaldehyde sensor elements and portable monitoring devices; unusual behaviour during the electrochemical oxidation of formaldehyde; and an algebraic approach to estimate the PES of formaldehyde through the study of vibrational excitations.
Download or read book New Challenges for the Wood based Panels Industry written by and published by . This book was released on 1997 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
