Download or read book Women in 3D Printing written by Stacey M DelVecchio and published by Springer Nature. This book was released on 2021-07-20 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides insights into the possibilities, realities and challenges of the rapidly evolving world of 3D printing or additive manufacturing. Contributors cover the applications for 3D printing, available materials, research, and the business of additive manufacturing from start-ups to Fortune 500 companies. As an important part of the Women in Science and Engineering book series, the work highlights the contribution of women leaders in additive manufacturing, inspiring women and men, girls and boys to enter and apply themselves to world of 3D printing and be a part of bringing the true potential of 3D printing to fruition. The book features contributions of prominent female engineers, scientists, business and technology leaders in additive manufacturing from academia, industry and government labs. Provides insight into women’s contributions to the field of additive manufacturing; Presents information from academia, research, government labs and industry into advances and applications in the rapidly evolving and growing field of 3D printing; Includes applications in industries such as medicine, aerospace, and automotive.

Download or read book 3D Printing For Dummies written by Richard Horne and published by John Wiley & Sons. This book was released on 2017-05-22 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bestselling book on 3D printing 3D printing is one of the coolest inventions we've seen in our lifetime, and now you can join the ranks of businesspeople, entrepreneurs, and hobbyists who use it to do everything from printing foods and candles to replacement parts for older technologies—and tons of mind-blowing stuff in between! With 3D Printing For Dummies at the helm, you'll find all the fast and easy-to-follow guidance you need to grasp the methods available to create 3D printable objects using software, 3D scanners, and even photographs through open source software applications like 123D Catch. Thanks to the growing availability of 3D printers, this remarkable technology is coming to the masses, and there's no time like the present to let your imagination run wild and actually create whatever you dream up—quickly and inexpensively. When it comes to 3D printing, the sky's the limit! Covers each type of 3D printing technology available today: stereolithology, selective sintering, used deposition, and granular binding Provides information on the potential for the transformation of production and manufacturing, reuse and recycling, intellectual property design controls, and the commoditization of products Walks you through the process of creating a RepRap printer using open source designs, software, and hardware Offers strategies for improved success in 3D printing On your marks, get set, innovate!

Download or read book 3D Technology in Fine Art and Craft written by Bridgette Mongeon and published by CRC Press. This book was released on 2015-07-30 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: The possibilities for creation are endless with 3D printing, sculpting, scanning, and milling, and new opportunities are popping up faster than artists can keep up with them. 3D Technology in Fine Art and Craft takes the mystery out of these exciting new processes by demonstrating how to navigate their digital components and showing their real world applications. Artists will learn to incorporate these new technologies into their studio work and see their creations come to life in a physical form never before possible. Featuring a primer on 3D basics for beginners,interviews, tutorials, and artwork from over 80 artists, intellectual property rights information, and a comprehensive companion website, this book is your field guide to exploring the exhilarating new world of 3D. Follow step-by-step photos and tutorials outlining the techniques, methodologies, and finished products of master artists who have employed 3D technology in new and inventive ways Learn how to enlarge, reduce, and repurpose existing artwork and create virtual pieces in physical forms through a variety of mediums Research your options with an accessible list of pros and cons of the various software, 3D printers, scanners, milling machines, and vendors that provide services in 3D technology Listen to podcasts with the artists and learn more tips and tricks through the book's website at www.digitalsculpting.net

Download or read book Getting Started with 3D Printing written by Liza Wallach Kloski and published by Maker Media, Inc.. This book was released on 2021-04-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is written in a casual, conversational style. It is easily accessible to those who have no prior knowledge in 3D printing, yet the book's message is solidly practical, technically accurate, and consumer-relevant. The chapters include contemporary, real-life learning exercises and insights for how to buy, use and maintain 3D printers. It also covers free 3D modeling software, as well as 3D printing services for those who don't want to immediately invest in the purchase of a 3D printer. Particular focus is placed on free and paid resources, the various choices available in 3D printing, and tutorials and troubleshooting guides.

Download or read book 3D Printing for the Radiologist E Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. - Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. - Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. - Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. - Consolidates today's available information on this timely topic into a single, convenient, resource.

Download or read book Mastering 3D Printing written by Joan Horvath and published by Apress. This book was released on 2020-05-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the most out of your printer, including how to design models, choose materials, work with different printers, and integrate 3D printing with traditional prototyping to make techniques like sand casting more efficient.This book is for new 3D printer owners, makers of all kinds, entrepreneurs, technology educators, and anyone curious about what you can do with a 3D printer. In this revised and expanded new edition of Mastering 3D Printing, which has been a trusted resource through five years of evolution in the 3D printing industry, you’ll gain a comprehensive understanding of 3D printing. This book presumes no foreknowledge and describes what you need to know about how printers work, how to decide which type of printer (filament, resin, or powder) makes the most sense for you, and then how to go forward in the case of filament and resin printers. This new edition now includes material about consumer resin printing, the evolution of lower-cost metal printing, and the plethora of both materials and applications. What You’ll LearnChoose among the different 3D printing technologiesCreate or find 3D models to printMake both easy and challenging prints come out as you imaginedAssess whether your business, factory, home or classroom will benefit from 3D printingWork with applications that are good candidates for first projects in home and industrial applications Who This Book Is For People who are encountering 3D printing for the first time, or for those who want to level up their skills. It is designed for the nontechnical adult and minimizes jargon. However more sophisticated users will still find tips and insights of value.

Download or read book 3D Printing written by Rafiq Noorani and published by CRC Press. This book was released on 2017-08-25 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing is a faster, more cost-effective method for building prototypes from three-dimensional computer-aided design (CAD) drawings. 3D Printing provides a fundamental overview of the general product design and manufacturing process and presents the technology and application for designing and fabricating parts in a format that makes learning easy. This user-friendly book clearly covers the 3D printing process for designers, teachers, students, and hobbyists and can also be used as a reference book in a product design and process development.

Download or read book Digital Gastronomy From 3d Food Printing To Personalized Nutrition written by Chee Kai Chua and published by World Scientific. This book was released on 2022-08-05 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The food industry has seen many changes over the last several decades — new technologies have been introduced into the way we cook, manufacture, and present food products to consumers. Digital gastronomy, which combines new computational abilities such as three-dimensional (3D) printing with traditional food preparation, has allowed consumers to design and manufacture food with personalized shapes, colours, textures, and even nutrition. In addition to the personalization of food, 3D printing of food has other advantages such as promoting automation in food preparation and food sustainability through 3D-printed cell-based meats and alternative proteins. Entire meals can be constructed just by 3D food printing alone.In this textbook, the background, principles, commercial food printers, materials, regulations, business development, as well as the emerging technologies and future outlook of 3D food printing are explored. In terms of 3D-printed materials, four main classes are reviewed: namely, desserts / snacks (comprising dairy products, chocolate, sugars, and dough), fruits / vegetables, meats /alternative proteins, and pharmaceuticals / nutraceuticals.This textbook has been written to offer readers keen to learn more about 3D food printing in terms of concepts, processes, applications, and developments of 3D food printing. No prior knowledge is required. At the end of each chapter, a set of problems offers undergraduate and postgraduate students practice on the main ideas discussed within the chapter. For tertiary-level lecturers and university professors, the topic on 3D food printing can be associated to other subjects in food and nutrition, pharmaceutical and nutraceutical sciences, and food engineering.Related Link(s)

Download or read book 3D Printing in Podiatric Medicine written by Kamalpreet Sandhu and published by Academic Press. This book was released on 2022-11-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing in Podiatric Medicine compiles an interdisciplinary range of scientific literature, laboratory developments, industrial implications and futuristic avenues in this field. The book provides recent developments and research breakthroughs in 3D printing in podiatric medicine, such as functionalized feedstock systems, smart products, process characteristics, modeling and optimization of printed systems and products, and industrial applications. It covers best practices for 3D printing methods to capture, document and validate challenges at the early stage of the design process. The book's content then goes into mitigating design strategies to address these challenges without compromising the cost, safety and quality of the device. This book supports new and emerging specializations and provides a comprehensive collection of technical notes, research designs, design methods and processes and case studies. - Includes coverage of the biomechanical behavior of feet, injuries and injury prevention using 3D printed customized orthosis - Uses an amalgamation of CAD/CAM, reverse engineering and artificial intelligence with 3D printing in podiatric medicine - Investigates plantar pressure using gait measurement technologies

Download or read book 3d Printing And Additive Manufacturing Of Electronics Principles And Applications written by Chee Kai Chua and published by World Scientific. This book was released on 2021-05-14 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)

Download or read book 3D Printing Projects written by DK and published by Penguin. This book was released on 2017-10-03 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: From a simple desk tidy to an elaborate castle, this step-by-step guide to 3D printing is perfect for children and beginners who want to learn how to design and print anything even if they do not own a printer. 3D Printing Projects provides an introduction to the exciting and ever-expanding world of 3D designing and printing. Learn how a 3D printer works and the different types of 3D printers on the market. Understand the basic 3D printing and designing terms, how to create and prepare files for printing, and also how to scan things to create a 3D model! You will also find out the common troubles faced while 3D printing and simple tricks to fix them. All the projects included in the book can be made using freely available online 3D modeling/CAD programs. Each project has a print time, details of filament or material needed, and a difficulty rating - from "easy" for beginners to "difficult" for those looking for a new challenge. Step-by-step instructions walk you through the 3D design process, from digital modeling and sculpting to slicing, printing, and painting so that children can make their own shark-shaped phone stand, customized lamps, and much more. The book also gives inspiration to further enhance your projects once you've mastered the basics. Join the 3D printing revolution today with DK's 3D Printing Projects book.

Download or read book 3D Printing for Product Designers written by Jennifer Loy and published by Taylor & Francis. This book was released on 2023-03-17 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Printing for Product Designers closes the gap between the rhetoric of 3D printing in manufacturing and the reality for product designers. It provides practical strategies to support the adoption and integration of 3D printing into professional practice. 3D printing has evolved over the last decade into a practical proposition for manufacturing, opening up innovative opportunities for product designers. From its foundations in rapid prototyping, additive manufacturing has developed into a range of technologies suitable for end-use products. This book shows you how to evaluate and sensitively understand people, process, and products and demonstrates how solutions for working with additive manufacturing can be developed in context. It includes a practical, step-by-step plan for product designers and CEOs aimed at supporting the successful implementation of 3D printing by stakeholders at all levels of a manufacturing facility, tailored to their stage of technology integration and business readiness. It features a wide range of real-world examples of practice illustrated in full colour, across industries such as healthcare, construction, and film, aligning with the strategic approach outlined in the book. The book can be followed chronologically to guide you to transform your process for a company, to meet the unique needs of a specific client, or to be used as a starting point for the product design entrepreneur. Written by experienced industry professionals and academics, this is a fundamental reference for product designers, industrial designers, design engineers, CEOs, consultants, and makers.

Download or read book Natural Enemies of Books A Messy History of Women in Printing and Typography written by and published by . This book was released on 2019 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural Enemies of Books' is a response to the groundbreaking 1937 publication 'Bookmaking on the Distaff Side', which brought together contributions by women printers, illustrators, authors, printers, typographers and typesetters, highlighting the print industry?s inequalities and proposing a takeover of the history of the book.00Edited by feminist graphic design collective MMS (Maryam Fanni, Matilda Flodmark and Sara Kaaman), 'Natural Enemies of Books' includes newly commissioned essays and poems by Kathleen Walkup, Ida Börjel, Jess Baines, Ulla Wikander and conversations with former typesetters Inger Humlesjö, Ingegärd Waaranperä, Gail Cartmail and Megan Downey, as well as reprints of the original book and other publications.0.

Download or read book Process Structure Properties in Polymer Additive Manufacturing written by Swee Leong Sing and published by MDPI. This book was released on 2021-09-01 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing (AM) methods have grown and evolved rapidly in recent years. AM for polymers is an exciting field and has great potential in transformative and translational research in many fields, such as biomedical, aerospace, and even electronics. Current methods for polymer AM include material extrusion, material jetting, vat polymerisation, and powder bed fusion. With the promise of more applications, detailed understanding of AM—from the processability of the feedstock to the relationship between the process–structure–properties of AM parts—has become more critical. More research work is needed in material development to widen the choice of materials for polymer additive manufacturing. Modelling and simulations of the process will allow the prediction of microstructures and mechanical properties of the fabricated parts while complementing the understanding of the physical phenomena that occurs during the AM processes. In this book, state-of-the-art reviews and current research are collated, which focus on the process–structure–properties relationships in polymer additive manufacturing.

Download or read book 3D Printing 101 written by M Eng Johannes Wild and published by 3dtech. This book was released on 2021-10-26 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: You can develop a basic and profound understanding of FDM 3D printing by using this 3D printing guide. You will learn everything you need to know about how to print objects using an FDM 3D printer! The author of the book is an enthusiastic 3D printing user and engineer (M.Eng.), who will guide you professionally from the basics to even more advanced settings. After a short introduction to the fundamentals of 3D printing and a 3D printer purchase advice, the usage of a 3D printer, as well as the required software (free software), is explained in a practical context. Ultimaker's Cura is used as a free slicing software, and its functions are explained in detail. Several images support the explanations of the book and provide a clear and easy introduction to the topic. The entire process - starting with a ".stl" file (3D model) all the way to the printed object - is explained by means of descriptive examples (downloadable free of charge). Even if you do not own a 3D printer or do not want to buy one, you will be given an insight into this fascinating technology from the contents of the book! You also have the option of using an external 3D printing service provider or a makerspace instead of an own 3D printer. Table of contents (short form): 1) Possibilities of 3D Printing 2) 3D Printer Purchase Advice 3) First 3D Print 4) Getting started with necessary 3D Printing Software 5) Advanced Objects and Advanced Settings 6) Step by step Slicing and Printing of Examples 7) Materials and Equipment 8) 3D Scanning 9) Troubleshooting and Maintenance This book is intended for anyone interested in 3D Printing! No matter if just for information purposes about the technology or for realizing own models. All procedures are explained in detail and are presented in a way that is very easy to understand! This practice guide is perfect for makers, creative people, inventors, engineers, architects, students, teenagers, and so on. Approx. 56 pages.

Download or read book 3D Printing Blueprints written by Joseph Larson and published by Packt Publishing Ltd. This book was released on 2013-01-01 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: "3D Printing Blueprints" is not about how to just make a ball or a cup. It includes fun-to-make and engaging projects. Readers don't need to be 3D printing experts, as there are examples related to stuff people would enjoy making. "3D Printing Blueprints" is for anyone with an interest in the 3D printing revolution and the slightest bit of computer skills. Whether you own a 3D printer or not you can design for them. All it takes is Blender, a free 3D modeling tool. Couple this book with a little creativity and someday you'll be able to hold something you designed on the computer in your hands.

Download or read book Women s Quick Facts written by STEMconnector® and published by Morgan James Publishing. This book was released on 2016-11-08 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Women’s Quick Facts is the indispensable resource on the status and contribution of women. The only resource of its kind, it is a book that will be highly sought after for multiple uses, both in the US and globally. It is unique with more than 310 sources and resources cited. It is about the game changers- organizations, media entities, businesses, resource institutions, and women’s associations, all driving towards progress.