Download or read book Circuits and Systems for Wireless Communications written by Markus Helfenstein and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: RF System Integration. 1. RF System Integration; C. Toumazou. 2. RF System Board Level Integration for Mobile Phones; G.J. Aspin. 3. Integration of RF Systems on a Chip; P.J. Mole. 4. Towards the Full Integration of Wireless Front-End Circuits; M. Steyaert. 5. GSM Transceiver Front-End Circuits in 0.25 mum CMOS; Q. Huang, et al. Part II: RF Front-End Circuits. 6. RF Front-End Circuits; Q. Huang. 7. Phase-Noise-to-Carrier Ratio in LC Oscillators; Q. Huang. 8. Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-Band Applications; B. Razavi. 9. Integrated Wireless Transc.
Download or read book Wireless Communications Circuits and Systems written by Institution of Electrical Engineers and published by IET. This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines integrated circuits, systems and transceivers for wireless and mobile communications. It covers the most recent developments in key RF, IF, analogue, mixed-signal components and single-chip transceivers in CMOS technology.
Download or read book Introduction to Wireless Communication Circuits written by Forouhar Farzaneh and published by CRC Press. This book was released on 2022-09-01 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade the tremendous development of Wireless Communications has changed human life incredibly. Considerable advancement has been made in the design and architecture of communications related RF and Microwave circuits. This book is focused on special circuits dedicated to the RF level of wireless Communications. From Oscillators to Modulation and Demodulation and from Mixers to RF and Power Amplifier Circuits, the topics are presented in a sequential manner. A wealth of analysis is provided in the text alongside various worked out examples. Related problem sets are given at the end of each chapter.
Download or read book Circuits and Systems for Future Generations of Wireless Communications written by Aleksandar Tasic and published by Springer. This book was released on 2010-10-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.
Download or read book Integrated Circuits for Wireless Communications written by Asad A. Abidi and published by Wiley-IEEE Press. This book was released on 1999 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Integrated Circuits for Wireless Communications High-frequency integrated circuit design is a booming area of growth that is driven not only by the expanding capabilities of underlying circuit technologies like CMOS, but also by the dramatic increase in wireless communications products that depend on them. Integrated Circuits for Wireless Communications includes seminal and classic papers in the field and is the first all-in-one resource to address this increasingly important topic. Internationally known and highly regarded in the field, editors Asad Abidi, Paul Gray, and Robert G. Meyer have meticulously compiled more than 100 papers and articles covering the very latest high-level integrated circuits techniques and solutions in use today. Integrated Circuits for Wireless Communications is devised expressly to provide IC design engineers, system architects, and integrators with a practical understanding of subjects ranging from architecture choices for integrated transceivers to actual circuit designs in all viable IC technologies, such as bipolar, CMOS, and GaAs. The papers selected represent a breadth of coverage and level of expertise that is simply unmatched in the field. Topics covered include: Radio architectures Receivers Transmitters and transceivers Power amplifiers and RF switches Oscillators Passive components Systems applications
Download or read book RF MEMS Circuit Design for Wireless Communications written by Héctor J. de los Santos and published by Artech House. This book was released on 2002 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive book to address the design of RF MEMS-based circuits for use in high performance wireless systems. A groundbreaking research and reference tool, the book enables you to understand the realm of applications of RF MEMS technology; become knowledgeable of the wide variety and performance levels of RF MEMS devices; and partition the architecture of wireless systems to achieve greater levels of performance. This innovative resource also guides you through the design process of RF MEMS-based circuits, and establishes a practical knowledge base for the design of high-yield RF MEMS-based circuits. The book features exercises and detailed case studies on working RF MEMS circuits that help you decide what approaches best fit your design constraints. This unified treatment of RF MEMS-based circuit technology opens up a new world of solutions for meeting the unique challenges of low power/portable wireless products.
Download or read book Low Power Wireless Communication Circuits and Systems written by Kiat Seng Yeo and published by CRC Press. This book was released on 2018-05-03 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.
Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Gabriele Manganaro and published by Academic Press. This book was released on 2013-05-13 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. Emerging research topics in RF IC design and its potential application Case studies and practical implementation examples Covers fundamental building blocks of a cellular base station system and satellite infrastructure Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face References to specialist papers for further reading
Download or read book Wireless Communication Electronics written by Robert Sobot and published by Springer Nature. This book was released on 2020-09-23 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for senior undergraduate and graduate students as well as practicing engineers who are involved in design and analysis of radio frequency (RF) circuits. Detailed tutorials are included on all major topics required to understand fundamental principles behind both the main sub-circuits required to design an RF transceiver and the whole communication system. Starting with review of fundamental principles in electromagnetic (EM) transmission and signal propagation, through detailed practical analysis of RF amplifier, mixer, modulator, demodulator, and oscillator circuit topologies, all the way to the basic system communication theory behind the RF transceiver operation, this book systematically covers all relevant aspects in a way that is suitable for a single semester university level course. Offers readers a complete, self-sufficient tutorial style textbook; Includes all relevant topics required to study and design an RF receiver in a consistent, coherent way with appropriate depth for a one-semester course; The labs and the book chapters are synchronized throughout a 13-week semester so that the students first study each sub-circuit and the related theory in class, practice problems, work out design details and then build and test the sub-circuit in the lab, before moving onto the next chapter; Includes detailed derivations of all key equations related to new concepts.
Download or read book Mixed Signal VLSI Wireless Design written by Emad N. Farag and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Wireless is coming” was the message received by VLSI designers in the early 1990’s. They believed it. But they never imagined that the wireless wave would be coming with such intensity and speed. Today one of the most challenging areas for VLSI designers is VLSI circuit and system design for wireless applications. New generation of wireless systems, which includes multimedia, put severe constraints on performance, cost, size, power and energy. The challenge is immense and the need for new generation of VLSI designers, who are fluent in wireless communication and are masters of mixed signal design, is great. No single text or reference book contains the necessary material to educate such needed new generation of VLSIdesigners. There are gaps. Excellent books exist on communication theory and systems, including wireless applications and others treat well basic digital, analog and mixed signal VLSI design. We feel that this book is the first of its kind to fill that gap. In the first half of this book we offer the reader (the VLSI designer) enough material to understand wireless communication systems. We start with a historical account. And then we present an overview of wireless communication systems. This is followed by detailed treatment of related topics; the mobile radio, digital modulation and schemes, spread spectrum and receiver architectures. The second half of the book deals with VLSI design issues related to mixed-signal design. These include analog-to-digital conversion, transceiver design, digital low-power techniques, amplifier design, phase locked loops and frequency synthesizers.
Download or read book Introduction to Wireless Communication Circuits written by Forouhar Farzaneh and published by CRC Press. This book was released on 2022-09-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade, tremendous development of Wireless Communications has changed human life and engineering. Considerable advancement has been made in design and architecture of related RF and microwave circuits. Introduction to Wireless Communication Circuits focusses on special circuits dedicated to the RF level of wireless communications. From oscillators to modulation and demodulation, and from mixers to RF and power amplifier circuits, all are presented in a sequential manner. A wealth of analytical relations is provided in the text alongside various worked out examples. Related problem sets are given at the end of each chapter. Basic concepts of RF Analog Circuit Design are developed in the book.
Download or read book VLSI for Wireless Communication written by Bosco Leung and published by Springer Science & Business Media. This book was released on 2011-11-06 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI for Wireless Communication, Second Edition, an advanced level text book, takes a system approach starting with an overview of the most up to date wireless systems and the transceiver architecture available today. Wireless standards are first introduced (updated to include the most recent 3G/4G standards in the second edition), and translates from a wireless standard to the implementation of a transceiver. This system approach is particularly important as the level of integration in VLSI increases and coupling between system and component design becomes more intimate. VLSI for Wireless Communication, Second Edition, illustrates designs with full design examples. Each chapter includes at least one complete design example that helps explain the architecture/circuits presented in this text. This book has close to 10 homework problems at the end of each chapter. A complete solutions manual is available on-line. VLSI for Wireless Communication, Second Edition, is designed as a primary text book for upper-undergraduate level students and graduate level students concentrating on electrical engineering and computer science. Professional engineers and researchers working in wireless communications, circuit design and development will find this book valuable as well.
Download or read book Circuits and Systems for Future Generations of Wireless Communications written by Aleksandar Tasic and published by Springer Science & Business Media. This book was released on 2009-05-16 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea for this book originated from a Special Session on Circuits and Systems for Future Generations of Wireless Communications that was presented at the 2005 InternationalSymposiumon Circuits and Systems, which was then followed by two Special Issues bearing the same title that appeared in the March and April 2008 issues of the IEEE Transactions on Circuits and Systems – Part II: Express Briefs. Out of a large number of great contributions, we have selected those tting best the book format based on their quality. We would like to thank all the authors, the reviewers of the Transactions on Circuits and Systems – Part II, and the reviewers of the nal book material for their efforts in creating this manuscript. We also thank the Springer Editorial Staff for their support in putting together all the good work. We hope that this book will provide you, the reader, with new insights into Circuits and Systems for Future Generations of Wireless Communications.
Download or read book Wireless Technologies written by Krzysztof Iniewski and published by CRC Press. This book was released on 2017-12-19 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced concepts for wireless technologies present a vision of technology that is embedded in our surroundings and practically invisible. From established radio techniques like GSM, 802.11 or Bluetooth to more emerging technologies, such as Ultra Wide Band and smart dust motes, a common denominator for future progress is the underlying integrated circuit technology. Wireless Technologies responds to the explosive growth of standard cellular radios and radically different wireless applications by presenting new architectural and circuit solutions engineers can use to solve modern design problems. This reference addresses state-of-the art CMOS design in the context of emerging wireless applications, including 3G/4G cellular telephony, wireless sensor networks, and wireless medical application. Written by top international experts specializing in both the IC industry and academia, this carefully edited work uncovers new design opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. The book is divided into three sections: wireless system perspectives, chip architecture and implementation issues, and devices and technologies used to fabricate wireless integrated circuits. Contributors address key issues in the development of future silicon-based systems, such as scale of integration, ultra-low power dissipation, and the integration of heterogeneous circuit design style and processes onto one substrate. Wireless sensor network systems are now being applied in critical applications in commerce, healthcare, and security. This reference, which contains 25 practical and scientifically rigorous articles, provides the knowledge communications engineers need to design innovative methodologies at the circuit and system level.
Download or read book Wireless Transceiver Circuits written by Woogeun Rhee and published by CRC Press. This book was released on 2018-09-03 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern transceiver systems require diversified design aspects as various radio and sensor applications have emerged. Choosing the right architecture and understanding interference and linearity issues are important for multi-standard cellular transceivers and software-defined radios. A millimeter-wave complementary metal–oxide–semiconductor (CMOS) transceiver design for multi-Gb/s data transmission is another challenging area. Energy-efficient short-range radios for body area networks and sensor networks have recently received great attention. To meet different design requirements, gaining good system perspectives is important. Wireless Transceiver Circuits: System Perspectives and Design Aspects offers an in-depth look at integrated circuit (IC) design for modern transceiver circuits and wireless systems. Ranging in scope from system perspectives to practical circuit design for emerging wireless applications, this cutting-edge book: Provides system design considerations in modern transceiver design Covers both systems and circuits for the millimeter-wave transceiver design Introduces four energy-efficient short-range radios for biomedical and wireless connectivity applications Emphasizes key building blocks in modern transceivers and transmitters, including frequency synthesizers and digital-intensive phase modulators Featuring contributions from renowned international experts in industry and academia, Wireless Transceiver Circuits: System Perspectives and Design Aspects makes an ideal reference for engineers and researchers in the area of wireless systems and circuits.
Download or read book Digital Front End in Wireless Communications and Broadcasting written by Fa-Long Luo and published by Cambridge University Press. This book was released on 2011-09-29 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering everything from signal processing algorithms to integrated circuit design, this complete guide to digital front-end is invaluable for professional engineers and researchers in the fields of signal processing, wireless communication and circuit design. Showing how theory is translated into practical technology, it covers all the relevant standards and gives readers the ideal design methodology to manage a rapidly increasing range of applications. Step-by-step information for designing practical systems is provided, with a systematic presentation of theory, principles, algorithms, standards and implementation. Design trade-offs are also included, as are practical implementation examples from real-world systems. A broad range of topics is covered, including digital pre-distortion (DPD), digital up-conversion (DUC), digital down-conversion (DDC) and DC-offset calibration. Other important areas discussed are peak-to-average power ratio (PAPR) reduction, crest factor reduction (CFR), pulse-shaping, image rejection, digital mixing, delay/gain/imbalance compensation, error correction, noise-shaping, numerical controlled oscillator (NCO) and various diversity methods.
Download or read book RF and Microwave Circuit Design for Wireless Communications written by Lawrence E. Larson and published by Artech House Publishers. This book was released on 1997 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Circuit Design for Wireless Communications addresses the complicated modulation schemes and higher frequencies required of today's wireless communications circuits. Covering cutting-edge developments in mixer circuits, frequency synthesizers, amplifier design, noise, and the future of wireless communication, it helps you design applications for digital cellular telephony, wireless LANs, PCS, GaAs and high-speed silicon bipolar IC technology, and low-power RF circuit technology.
