Download or read book Wind Turbine Gearbox Condition Monitoring Vibration Analysis Benchmarking Datasets Data written by and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Alfonso Fernandez Del Rincon and published by Springer. This book was released on 2019-02-07 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at researchers, industry professionals and students interested in the broad ranges of disciplines related to condition monitoring of machinery working in non-stationary conditions. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2018, held on June 20 – 22, 2018, in Santander, Spain. The book describes both theoretical developments and a number of industrial case studies, which cover different topics, such as: noise and vibrations in machinery, conditioning monitoring in non-stationary operations, vibro-acoustic diagnosis of machinery, signal processing, application of pattern recognition and data mining, monitoring and diagnostic systems, faults detection, dynamics of structures and machinery, and mechatronic machinery diagnostics.
Download or read book Condition Monitoring and Nonlinear Frequency Analysis Based Fault Detection of Mechanical Vibration Systems written by Hogir Rafiq and published by Springer Nature. This book was released on 2023-08-26 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hogir Rafiq proposes two approaches, the signal processing based condition monitoring approaches with applications to fault detection in gear systems, and application of deep mathematical and system theoretical methods to fault detection. The author develops the multivariate empirical mode decomposition (MEMD) algorithm to enhance the capability of extracting fault features and theoretical problems in nonlinear frequency analysis methods, respectively. The effectiveness has been demonstrated by an experimental study on a wind turbine gearbox test rig.
Download or read book Wind Turbine Control and Monitoring written by Ningsu Luo and published by Springer. This book was released on 2014-08-30 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maximizing reader insights into the latest technical developments and trends involving wind turbine control and monitoring, fault diagnosis, and wind power systems, ‘Wind Turbine Control and Monitoring’ presents an accessible and straightforward introduction to wind turbines, but also includes an in-depth analysis incorporating illustrations, tables and examples on how to use wind turbine modeling and simulation software. Featuring analysis from leading experts and researchers in the field, the book provides new understanding, methodologies and algorithms of control and monitoring, computer tools for modeling and simulation, and advances the current state-of-the-art on wind turbine monitoring and fault diagnosis; power converter systems; and cooperative & fault-tolerant control systems for maximizing the wind power generation and reducing the maintenance cost. This book is primarily intended for researchers in the field of wind turbines, control, mechatronics and energy; postgraduates in the field of mechanical and electrical engineering; and graduate and senior undergraduate students in engineering wishing to expand their knowledge of wind energy systems. The book will also interest practicing engineers dealing with wind technology who will benefit from the comprehensive coverage of the theoretic control topics, the simplicity of the models and the use of commonly available control algorithms and monitoring techniques.
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.
Download or read book Offshore Wind Turbines written by Peter Tavner and published by IET. This book was released on 2012-08-09 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Wind Turbines clearly presents the facts and figures of wind turbine operation and maintenance in the inclement offshore environment.
Download or read book Data Science Analytics and Applications written by Peter Haber and published by Springer Nature. This book was released on 2024-01-03 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the overall digitalization in all spheres of our lives, Data Science and Artificial Intelligence (AI) are nowadays cornerstones for innovation, problem solutions, and business transformation. Data, whether structured or unstructured, numerical, textual, or audiovisual, put in context with other data or analyzed and processed by smart algorithms, are the basis for intelligent concepts and practical solutions. These solutions address many application areas such as Industry 4.0, the Internet of Things (IoT), smart cities, smart energy generation, and distribution, and environmental management. Innovation dynamics and business opportunities for effective solutions for the essential societal, environmental, or health challenges, are enabled and driven by modern data science approaches. However, Data Science and Artificial Intelligence are forming a new field that needs attention and focused research. Effective data science is only achieved in a broad and diverse discourse – when data science experts cooperate tightly with application domain experts and scientists exchange views and methods with engineers and business experts. Thus, the 5th International Data Science Conference (iDSC 2023) brings together researchers, scientists, business experts, and practitioners to discuss new approaches, methods, and tools made possible by data science.
Download or read book Renewable Power Generation Costs in 2019 written by International Renewable Energy Agency IRENA and published by International Renewable Energy Agency (IRENA). This book was released on 2020-06-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: IRENA’s latest global cost study shows solar and wind power reaching new price lows. The report highlights cost trends for all major renewable electricity sources.
Download or read book Wind Energy Handbook written by Tony Burton and published by John Wiley & Sons. This book was released on 2001-12-12 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: As environmental concerns have focused attention on the generation of electricity from clean and renewable sources wind energy has become the world's fastest growing energy source. The Wind Energy Handbook draws on the authors' collective industrial and academic experience to highlight the interdisciplinary nature of wind energy research and provide a comprehensive treatment of wind energy for electricity generation. Features include: An authoritative overview of wind turbine technology and wind farm design and development In-depth examination of the aerodynamics and performance of land-based horizontal axis wind turbines A survey of alternative machine architectures and an introduction to the design of the key components Description of the wind resource in terms of wind speed frequency distribution and the structure of turbulence Coverage of site wind speed prediction techniques Discussions of wind farm siting constraints and the assessment of environmental impact The integration of wind farms into the electrical power system, including power quality and system stability Functions of wind turbine controllers and design and analysis techniques With coverage ranging from practical concerns about component design to the economic importance of sustainable power sources, the Wind Energy Handbook will be an asset to engineers, turbine designers, wind energy consultants and graduate engineering students.
Download or read book New Advances in Soft Computing in Civil Engineering written by Gebrail Bekdaş and published by Springer Nature. This book was released on with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Health Monitoring written by Daniel Balageas and published by John Wiley & Sons. This book was released on 2010-01-05 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is organized around the various sensing techniques used to achieve structural health monitoring. Its main focus is on sensors, signal and data reduction methods and inverse techniques, which enable the identification of the physical parameters, affected by the presence of the damage, on which a diagnostic is established. Structural Health Monitoring is not oriented by the type of applications or linked to special classes of problems, but rather presents broader families of techniques: vibration and modal analysis; optical fibre sensing; acousto-ultrasonics, using piezoelectric transducers; and electric and electromagnetic techniques. Each chapter has been written by specialists in the subject area who possess a broad range of practical experience. The book will be accessible to students and those new to the field, but the exhaustive overview of present research and development, as well as the numerous references provided, also make it required reading for experienced researchers and engineers.
Download or read book Artificial Neural Networks for Modelling and Control of Non Linear Systems written by Johan A.K. Suykens and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial neural networks possess several properties that make them particularly attractive for applications to modelling and control of complex non-linear systems. Among these properties are their universal approximation ability, their parallel network structure and the availability of on- and off-line learning methods for the interconnection weights. However, dynamic models that contain neural network architectures might be highly non-linear and difficult to analyse as a result. Artificial Neural Networks for Modelling and Control of Non-Linear Systems investigates the subject from a system theoretical point of view. However the mathematical theory that is required from the reader is limited to matrix calculus, basic analysis, differential equations and basic linear system theory. No preliminary knowledge of neural networks is explicitly required. The book presents both classical and novel network architectures and learning algorithms for modelling and control. Topics include non-linear system identification, neural optimal control, top-down model based neural control design and stability analysis of neural control systems. A major contribution of this book is to introduce NLq Theory as an extension towards modern control theory, in order to analyze and synthesize non-linear systems that contain linear together with static non-linear operators that satisfy a sector condition: neural state space control systems are an example. Moreover, it turns out that NLq Theory is unifying with respect to many problems arising in neural networks, systems and control. Examples show that complex non-linear systems can be modelled and controlled within NLq theory, including mastering chaos. The didactic flavor of this book makes it suitable for use as a text for a course on Neural Networks. In addition, researchers and designers will find many important new techniques, in particular NLq emTheory, that have applications in control theory, system theory, circuit theory and Time Series Analysis.
Download or read book Handbook of Neural Computation written by Pijush Samui and published by Academic Press. This book was released on 2017-07-18 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Neural Computation explores neural computation applications, ranging from conventional fields of mechanical and civil engineering, to electronics, electrical engineering and computer science. This book covers the numerous applications of artificial and deep neural networks and their uses in learning machines, including image and speech recognition, natural language processing and risk analysis. Edited by renowned authorities in this field, this work is comprised of articles from reputable industry and academic scholars and experts from around the world. Each contributor presents a specific research issue with its recent and future trends. As the demand rises in the engineering and medical industries for neural networks and other machine learning methods to solve different types of operations, such as data prediction, classification of images, analysis of big data, and intelligent decision-making, this book provides readers with the latest, cutting-edge research in one comprehensive text. - Features high-quality research articles on multivariate adaptive regression splines, the minimax probability machine, and more - Discusses machine learning techniques, including classification, clustering, regression, web mining, information retrieval and natural language processing - Covers supervised, unsupervised, reinforced, ensemble, and nature-inspired learning methods
Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.
Download or read book Proceedings of the 6th National Symposium on Rotor Dynamics written by J. S. Rao and published by Springer Nature. This book was released on 2020-10-13 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers presented during the 6th National Symposium on Rotor Dynamics, held at CSIR-NAL, Bangalore, and focuses on the latest trends in rotor dynamics and various challenges encountered in the design of rotating machinery. The book is of interest to researchers from mechanical, aerospace, tribology and power industries, engineering service providers and academics.
Download or read book Remote Sensing of Atmospheric Conditions for Wind Energy Applications written by Charlotte Bay Hasager and published by MDPI. This book was released on 2019-05-24 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue “Atmospheric Conditions for Wind Energy Applications” hosts papers on aspects of remote sensing for atmospheric conditions for wind energy applications. Wind lidar technology is presented from a theoretical view on the coherent focused Doppler lidar principles. Furthermore, wind lidar for applied use for wind turbine control, wind farm wake, and gust characterizations is presented, as well as methods to reduce uncertainty when using lidar in complex terrain. Wind lidar observations are used to validate numerical model results. Wind Doppler lidar mounted on aircraft used for observing winds in hurricane conditions and Doppler radar on the ground used for very short-term wind forecasting are presented. For the offshore environment, floating lidar data processing is presented as well as an experiment with wind-profiling lidar on a ferry for model validation. Assessments of wind resources in the coastal zone using wind-profiling lidar and global wind maps using satellite data are presented.
Download or read book Condition Monitoring of Rotating Electrical Machines written by Peter Tavner and published by Institution of Engineering and Technology. This book was released on 2020-06-04 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Condition monitoring of engineering plants has increased in importance as engineering processes have become increasingly automated. However, electrical machinery usually receives attention only at infrequent intervals when the plant or the electricity generator is shut down. The economics of industry have been changing, placing ever more emphasis on the importance of reliable operation of the plants. Electronics and software in instrumentation, computers, and digital signal processors have improved our ability to analyse machinery online. Condition monitoring is now being applied to a range of systems from fault-tolerant drives of a few hundred watts to machinery of a few hundred MW in major plants.
