Download or read book Wind Effects on Structures written by Emil Simiu and published by John Wiley & Sons. This book was released on 2019-03-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.
Download or read book Winds Effects on Structures written by Emil Simiu and published by John Wiley & Sons. This book was released on 1996-08-17 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: The damage caused by recent hurricanes has highlighted the interest in the construction of wind resistant structures. This book addresses developments in the field, and provides engineers with up-to-date methods and standards for construction
Download or read book Wind Effects on Structures written by and published by Allied Publishers. This book was released on 1997 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Effects on Buildings and Design of Wind Sensitive Structures written by Ted Stathopoulos and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by seven internationally known experts, the articles in this book present the fundamentals and practical applications of contemporary wind engineering. It covers complex problems in wind-building interaction from the perspective of a structural designer, examining both experimental and computational approaches and their relative merits.
Download or read book Wind Effects on Structures written by Emil Simiu and published by John Wiley & Sons. This book was released on 2019-01-10 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.
Download or read book Wind Loading of Structures written by John D. Holmes and published by CRC Press. This book was released on 2001-06-14 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridging the gap between wind and structural engineering, Wind Loading of Structures is essential reading for practising civil, structural and mechanical engineers, and graduate students of wind engineering, presenting the principles of wind engineering and providing guidance on the successful design of structures for wind loading by gales, hurricanes, typhoons, thunderstorm downdrafts and tornados.
Download or read book Wind Loads on Structures written by Claës Dyrbye and published by Wiley. This book was released on 1997-01-23 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive treatment of wind effects on structures. It starts with the load chain, then moves on to meteorological considerations, atmospheric boundary layer, static wind load, dynamic wind load and scaling laws used in wind-tunnel tests. Includes the latest information on the Euronorms: Eurocode 1, Actions on Structures. Provides a logical and comprehensive treatment of the basic principles.
Download or read book Advanced Structural Wind Engineering written by Yukio Tamura and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a textbook for advanced courses as it introduces state-of-the-art information and the latest research results on diverse problems in the structural wind engineering field. The topics include wind climates, design wind speed estimation, bluff body aerodynamics and applications, wind-induced building responses, wind, gust factor approach, wind loads on components and cladding, debris impacts, wind loading codes and standards, computational tools and computational fluid dynamics techniques, habitability to building vibrations, damping in buildings, and suppression of wind-induced vibrations. Graduate students and expert engineers will find the book especially interesting and relevant to their research and work.
Download or read book Wind Effects on Structures written by Emil Simiu and published by Wiley-Interscience. This book was released on 1986-02-13 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the physics of wind and its impact on the buildings and towers.
Download or read book Wind Effects on Buildings and Structures written by and published by . This book was released on 1968 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Design for Wind Forces A Guide to ASCE 7 16 Standards written by Rima Taher and published by McGraw Hill Professional. This book was released on 2018-08-24 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expert coverage of ASCE 7-16–compliant, wind-resistant engineering methods for safer, sounder low-rise and standard multi-story buildings Using the hands-on information contained in this comprehensive engineering guide you will be able to design and construct safer buildings that will better withstand extreme wind forces. Written by a recognized structural design expert, the book explains the general concepts and principles involved in the design of buildings and structures for wind forces. Structural systems used to resist wind forces are outlined and explained, in the context of both low-rise and high-rise buildings. Building Design for Wind Forces provides easy-to-follow summaries of complex ASCE 7-16 wind load provisions and shows how to apply the corresponding design procedures using practical examples. A detailed discussion of typical structural damage caused by extreme wind events such as hurricanes and tornadoes is presented along with design recommendations. Current wind engineering activities and recent research developments are discussed, and a general overview of wind tunnel procedures and an introduction to the concept of database-assisted design (DAD) is provided. Building Design for Wind Forces covers:•Wind forces and wind effects on buildings and structures•Wind load provisions of the ASCE 7-16 standard•Damage to structures caused by extreme wind events•Wind engineering activities and research trends•Structural systems for lateral loads•Tall buildings•Wind design procedures and wind load parameters•Wind loads on the Main Wind Force Resisting System (MWFRS)•Wind loads on Components and Cladding (C&C)•Wind loads on building appurtenances and other structures•Wind tunnels and the wind tunnel procedure•Database-assisted design (DAD)
Download or read book Design of Buildings for Wind written by Emil Simiu and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASCE 7 is the US standard for identifying minimum design loads for buildings and other structures. ASCE 7 covers many load types, of which wind is one. The purpose of this book is to provide structural and architectural engineers with the practical state-of-the-art knowledge and tools needed for designing and retrofitting buildings for wind loads. The book will also cover wind-induced loss estimation. This new edition include a guide to the thoroughly revised, 2010 version of the ASCE 7 Standard provisions for wind loads; incorporate major advances achieved in recent years in the design of tall buildings for wind; present material on retrofitting and loss estimation; and improve the presentation of the material to increase its usefulness to structural engineers. Key features: New focus on tall buildings helps make the analysis and design guidance easier and less complex. Covers the new simplified design methods of ASCE 7-10, guiding designers to clearly understand the spirit and letter of the provisions and use the design methods with confidence and ease. Includes new coverage of retrofitting for wind load resistance and loss estimation from hurricane winds. Thoroughly revised and updated to conform with current practice and research.
Download or read book Wind Tunnel Testing for Buildings and Other Structures written by American Society of Civil Engineers and published by . This book was released on 2021-09-24 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: ASCE/SEI 49-21 provides the minimum requirements for conducting and interpreting wind tunnel tests to determine wind loads on buildings and other structures.
Download or read book Wind Tunnel Studies of Buildings and Structures written by Jack E. Cermak and published by Amer Society of Civil Engineers. This book was released on 1999 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOP 67 provides guidelines to assist architects and engineers involved with wind tunnel model testing of buildings and structures.
Download or read book Wind Science and Engineering written by Giovanni Solari and published by Springer. This book was released on 2019-07-12 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an essential overview of wind science and engineering, taking readers on a journey through the origins, developments, fundamentals, recent advancements and latest trends in this broad field. Along the way, it addresses a diverse range of topics, including: atmospheric physics; meteorology; micrometeorology; climatology; the aerodynamics of buildings, aircraft, sailing boats, road vehicles and trains; wind energy; atmospheric pollution; soil erosion; snow drift, windbreaks and crops; bioclimatic city-planning and architecture; wind actions and effects on structures; and wind hazards, vulnerability and risk. In order to provide a comprehensive overview of wind and its manifold effects, the book combines scientific, descriptive and narrative chapters. The book is chiefly intended for students and lecturers, for those who want to learn about the genesis and evolution of this topic, and for the multitude of scholars whose work involves the wind.
Download or read book Winds Effects on Structures written by Emil Simiu and published by Wiley-Interscience. This book was released on 1996-08-17 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: The brand-new edition—with complete, up-to-date coverage of new methods and standards for the construction of wind-resistant structures Long recognized as the sole source of detailed information on the design of wind-resistant structures, Wind Effects on Structures equips designers and engineers with crucial knowledge concerning the atmosphere, the forces placed on a structure by the wind environment, and the behavior of structures under the action of these forces. Revised, updated, and augmented with material on new building codes, engineering practices, and technology, this latest edition is the most comprehensive and up-to-the-minute reference available on this important subject. New features include: Special material on the design of low-rise buildings, including building code provisions for wind loads on these structures Technical information on hurricane micrometeorology, computational fluid dynamics, empirical aerolastic models, and many other areas Easy-to-use software package for the automatic calculation of wind loads in accordance with ASCE Standard 7-95, and much more The damage done by recent hurricanes such as Andrew and Iniki has inspired a number of significant developments in the wind engineering field, from increased use of technology to predict structural loading to the creation of more stringent building codes. Long recognized as the sole source of detailed information on the design of wind-resistant structures, Wind Effects on Structures has now been fully revised to address these important changes—providing engineers with completely up-to-date methods and standards for the construction of wind-resistant structures. Divided into sections on the atmosphere, wind loads, and their effects on structures, the text now incorporates the latest information on the design of low-rise buildings, revised building code standards, and suspended-span structures, plus new material on an extensive range of technical subjects—including across-wind and torsional effects on tall structures, damping of flexible buildings, and progress in wind tunnel modeling. Combining fundamental concepts with real-world applications, this new edition features an easy-to-use software package that enables fast and accurate calculation of wind loads in line with ASCE Standard 7-95 provisions. Thoroughly updated, revised, and amended, Wind Effects on Structures provides the invaluable guidance designers and engineers need to assure the adequate structural safety and serviceability of virtually any wind-sensitive project.
Download or read book Design of Buildings and Bridges for Wind written by Emil Simiu and published by Wiley. This book was released on 2006-03-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Buildings and Bridges for Wind is a practical guide that uses physical and intuitive approaches, and practical examples, to demonstrate how to interpret and use provisions of the ASCE-7 Standard and design structures for strength and serviceability. Written by two of the world's foremost wind engineering experts, this unique text is written specifically for designers and structural engineers. Covering routine buildings, tall buildings, and bridges, Design of Buildings and Bridges for Wind contains a wealth of step-by-step numerical examples to assist structural engineers in understanding and using the elements of wind and structural engineering required for design. This hands-on guide features: * Information on how to determine design wind loads and wind effects for both routine and special structures * Information allowing structural engineers to effectively scrutinize estimates of wind effects submitted by wind engineering consultants * Clear, transparent procedures for developing estimates of wind effects based on aerodynamic data supplied in electronic form by wind tunnel operators * Access to wind speed databases and software for determining wind effects on rigid and flexible structures (nist.gov/wind)
