Download or read book When should an Original Equipment Manufacturer OEM remanufacture written by Julia Berhard and published by GRIN Verlag. This book was released on 2015-11-11 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master's Thesis from the year 2015 in the subject Business economics - Supply, Production, Logistics, grade: 7,5, Erasmus University Rotterdam (Rotterdam School of Management), course: Supply Chain Management, language: English, abstract: An increasing rate of return, raw material prices and carbon emissions urge companies to look for sustainable solutions. The value of returned products can be recaptured through closed-loop supply chain activities and in particular through reconditioning, of which remanufacturing is one option that retains a high value. The definition must be clear, however, as the term is not yet common. This recovery type ensures that a restored product fulfils an equivalent or even superior function than the original product. Furthermore, it receives the same warranty as a new product and secures profits while minimizing the environmental impact. When a company decides whether remanufacturing is a viable option, several factors have to be considered. Therefore, the aim of this thesis was to provide guidance for the remanufacturing decision, while bridging the gap between research and practice. An extensive literature review provided general remanufacturing benefits and issues, as well as a selection of the most important influencing characteristics. Subsequently, hypotheses were formulated per characteristic category, which were product, internal and external, and tested via surveys and statistically. The analysis yielded that a product should be highly modular, have a long product life cycle and a residual value. The internal processes require sufficient return quantities as a starting point, low processing costs compared to the original production and the processing time has to be weighed against other benefits. In addition, a market demand has to be established and the cannibalization effect should be taken into account. Finally, a positive perception of remanufactured products and sufficient market channels to commercialize them are favourable for remanufacturing. Using the survey means of the influencing characteristics a ranking was created, irrespective of the signs, but with regard to the strength. The top five are processing costs, residual value, customer perception, product life cycle and processing time. These rankings are slightly different depending on the industry. Lastly, interviews with experts further supplemented the analysis and a managerial framework was created to provide guidance for the remanufacturing decision process.
Download or read book Remanufacturing Initiation for Original Equipment Manufacturers written by Johan Vogt Duberg and published by Linköping University Electronic Press. This book was released on 2024-04-29 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an industrial process in which a core – a used, discarded, or broken product – is transformed into a product with a like-new specification and condition. However, to this date, remanufacturing activities on the market are few compared to manufacturing. There are several types of remanufacturers; the least common type is the original equipment remanufacturer, an original equipment manufacturer that not only manufactures new products but also remanufactures cores of its own products. Remanufacturing is potentially becoming a more widely used industrial process for original equipment manufacturers, and increased remanufacturing activities can positively contribute to the environment. The contribution comes from a reduction of raw material and energy consumption compared to manufacturing. Therefore, remanufacturing has the potential to decouple environmental impact from economic growth, thus contributing to more sustainable societies. However, assessing the benefits of remanufacturing does not directly correlate to growth within the remanufacturing industry. To encapsulate the environmental, social, and economic benefits of remanufacturing, manufacturers need to be aware of how remanufacturing can be initiated and implemented in practice. Therefore, the objective of this dissertation is to develop support measures for original equipment manufacturers to initiate profitable remanufacturing. This research takes a stand in case study and transdisciplinary research where the initiation of profitable remanufacturing is studied at two original equipment manufacturers. The research study developed knowledge of how remanufacturing could be incorporated into existing operations at original equipment manufacturers. In parallel, financial assessments based on cost-benefit analysis were built to measure how well the case companies could perform remanufacturing. For the case study research, seven remanufacturing scenarios were developed, ranging from centralised remanufacturing performed by the original equipment manufacturer to decentralised performed at multiple locations using a retail network. Which scenario is preferable depends on, for example, risk-consciousness, cooperation between actors, and volume targets. However, given ideal circumstances, remanufacturing in-house in a centralised scenario was shown to be the most beneficial for the investigated original equipment manufacturer since the fewer middle hands and economies of scale also potentially enable lower costs. For the transdisciplinary research, the remanufacturing initiation was business model-centric, meaning that the remanufacturing system was a consequence of a decision for a specific business model. Here, a scenario-based analysis was developed to understand under which circumstances the business model with remanufacturing was more lucrative for the provider – the original equipment manufacturer – and less costly for the users – the customers. For this, a systematic assessment approach was developed consisting of three steps: (1) provide a cost overview for each business model, (2) create scenarios by modifying the cost drivers, and (3) combine scenarios to reach synergetic effects. Based on the case study, two sets of four prerequisites for initiating remanufacturing were derived. These are divided into essential and supporting prerequisites and illustrated through a framework called the Remanufacturing Rocket. The essential prerequisites highlight fundamental requirements to perform remanufacturing. Should one of these four factors be missing, remanufacturing cannot be successfully initiated. The supporting prerequisites are valuable to enhance the effectiveness and efficiency of the process, such as through streamlined operations, organisational change, or information exchange. Hence, to reach the fullest potential of remanufacturing, both the essential and the supporting prerequisites are needed. Furthermore, the area of financial assessments was explored in a systematic literature review to identify insights for developing such assessments tailored for individual original equipment manufacturers in initiating remanufacturing. For this, six perspectives for framing financial assessments are proposed. These cover the system boundaries for the assessments as well as the individual needs and visions of original equipment manufacturers. Additionally, a framework was developed to select financial assessment models for remanufacturing initiations based on ease of use and capability to handle complex datasets. Conclusively, it is proposed to apply the prerequisites for initiating remanufacturing together with a financial assessment in an iterative manner to investigate the profitability for original equipment manufacturers to initiate remanufacturing. The essential prerequisites influence the first iteration of the financial assessment, which then contributes to refinements of how the essential prerequisites should be aligned in an economically preferable way. Once satisfactory, another iterative process could be initiated between the supporting prerequisites and the financial assessment. By using the proposed approach, the prospects of profitable remanufacturing could be thoroughly investigated before attempting to initiate a process in practice, thus reducing the number of resources spent in vain. Additionally, the iterative process was integrated into a 5-step Approach For Initiating Remanufacturing (5AFIR) to guide original equipment manufacturers towards initiating profitable remanufacturing. Refabrikation (oder Wiederaufbereitung, engl. Remanufacturing) ist ein industrieller Prozess, bei dem ein Altteil – ein gebrauchtes, ausrangiertes, verschlissenes oder defektes Produkt – gemäß den Herstellerspezifikationen in einen neuwertigen Zustand gebracht wird. Heutzutage macht Refabrikation allerdings nur einen kleinen Teil der Fertigungsindustrie aus. Verschiedene Arten von Unternehmen betreiben Refabrikation, wobei Originalgerätehersteller, sogenannte OEMs (engl. für Original Equipment Manufacturer), am seltensten sind. Solche OEMs betreiben neben Produktion auch eine Wiederaufbereitung ihrer eigenen Produkte. Refabrikation kann sowohl ökologische als auch ökonomische Vorteile bringen und hat somit grundsätzlich hohes Marktpotential. Der geringere Rohstoff- und Energieverbrauch von Refabrikation im Vergleich zu Neuproduktion ist ein Beispiel für ökologischen Vorteil. Refabrikation ermöglicht außerdem, negative Umweltauswirkungen durch Produktion und Wirtschaftswachstum voneinander unabhängig zu machen und trägt somit zu nachhaltigem Wachstum bei. Allerdings hängt der Nutzen von Refabrikation nicht direkt mit dem Wachstum innerhalb der Refabrikationsbranche zusammen. Um die ökologischen, sozialen und ökonomischen Vorteile nutzen zu können, müssen Hersteller Kompetenz zur praktischen Umsetzung von Refabrikation aufbauen. Ziel dieser Dissertation ist daher die Entwicklung von Unterstützungsmaßnahmen und -konzepten für OEMs, die zu profitabler Refabrikation führen. Diese Arbeit basiert auf einer Fallstudie und auf transdisziplinärer Forschung, bei der die Einführung von profitabler Refabrikation bei zwei OEMs untersucht wurde. Die Fallstudie lieferte Erkenntnisse darüber, wie Refabrikation in bestehende Abläufe bei OEMs integriert werden kann. Außerdem wurden finanzielle Bewertungskriterien auf der Grundlage einer Kosten-Nutzen-Analyse erstellt, um messen zu können, wie erfolgreich die untersuchten Unternehmen Refabrikation implementieren könnten. Für die Fallstudie wurden sieben Refabrikationsszenarien entwickelt, die von zentraler Refabrikation durch das OEM bis zu dezentraler Refabrikation an mehreren Standorten durch ein Netzwerk von Niederlassungen reichen. Welches der Szenarien vorzuziehen ist, hängt beispielsweise vom Risikobewusstsein, der Zusammenarbeit der Akteure und den angestrebten Stückzahlen ab. Unter idealen Umständen erwies sich die unternehmensinterne Refabrikation mit zentralisierter Struktur als das vorteilhafteste Szenario. Für die untersuchten OEMs führten weniger Zwischenhändler und Größenvorteile zu geringeren Kosten. In der transdisziplinären Forschung dieser Dissertation wurde davon ausgegangen, dass das Refabrikationssystem aus der Entscheidung für ein bestimmtes Geschäftsmodell folgt. Basierend auf verschiedenen Szenarien wurde analysiert, unter welchen Umständen das Geschäftsmodell inklusive Refabrikation für den Anbieter (OEM) lukrativer und für die Anwender (Kunden) kostengünstiger war. Hierzu wurde ein systematisches Bewertungsschema entwickelt, das aus drei Schritten besteht: (1) Bereitstellung einer Kostenübersicht für jedes Geschäftsmodell, (2) Erstellung von Szenarien durch Modifikation der Kostentreiber und (3) Kombination von Szenarien, um Synergieeffekte zu erzielen. Anforderungen für die Einführung von Refabrikation wurden auf Basis der Fallstudie abgeleitet. Diese sind in vier essentielle und vier unterstützende Anforderungen eingeteilt und werden durch ein Modell namens Refabrikationsrakete veranschaulicht. Die essentiellen Anforderungen sind grundlegend für die Durchführung von Refabrikation. Ist eine dieser vier Anforderungen nicht erfüllt, kann Refabrikation nicht erfolgreich umgesetzt werden. Die unterstützenden Anforderungen steigern die Effektivität und Effizienz des Einführungsprozesses, beispielsweise durch optimierte Abläufe, organisatorische Änderungen oder Informationsaustausch. Um das volle Potenzial von Refabrikation auszuschöpfen, müssen sowohl die essentiellen als auch die unterstützenden Anforderungen erfüllt werden. Wirtschaftliche Bewertungskriterien wurden im Rahmen einer systematischen Literaturrecherche betrachtet. Ziel der Recherche war es, Erkenntnisse für die Entwicklung solcher Bewertungskriterien zu erlangen. Die Kriterien sollen dabei auf einzelne OEMs und die Einführung von Refabrikation zugeschnitten sein. In dieser Arbeit werden sechs Ansätze für die Entwicklung wirtschaftlicher Bewertungskriterien vorgeschlagen. Diese Ansätze behandeln sowohl Systemgrenzen für die Bewertungskriterien als auch individuelle Bedürfnisse und Ziele der OEM. Darüber hinaus wurde ein Rahmenwerk entwickelt, um wirtschaftliche Bewertungskriterien auf Basis ihrer Benutzerfreundlichkeit und ihrer Fähigkeit zur Bewältigung komplexer Datenmengen auszuwählen. Abschließend wird vorgeschlagen, die Anforderungen für die Einführung von Refabrikation zusammen mit einer wirtschaftlichen Bewertung iterativ zu prüfen, um die Rentabilität von Refabrikation für OEMs zu analysieren. Die essentiellen Anforderungen beeinflussen die erste Iterationsschleife der wirtschaftlichen Bewertung. In dieser ersten Schleife wird verfeinert, wie die Grundanforderungen wirtschaftlich sinnvoll kombiniert werden können. Es folgt eine zweite Iterationsschleife zwischen den unterstützenden Anforderungen und der finanziellen Bewertung. Mit diesem Vorgehen kann das Potential einer rentablen Refabrikation gründlich untersucht werden bevor mit der Realisierung begonnen wird. Dadurch können eventuell erfolglose Einführungsversuche vermieden und vergeblich aufgewendete Ressourcen reduziert werden. Der iterative Prozess wurde in einen 5-stufigen Modell zur Einführung von Refabrikation (5AFIR) zusammengefasst. Återtillverkning är en industriell process där en stomme – en använd, uttjänt eller trasig produkt – omformas till en produkt vars specifikation och kvalitet motsvarar nyskick. Idag utgör återtillverkning endast en liten del av den totala tillverkningsindustrin. Det finns flera typer av återtillverkare; den ovanligaste är originaltillverkande återtillverkare, det vill säga, ett tillverkande företag som även återtillverkar sina egna produkter. Genom den låga grad av återtillverkning bland originaltillverkare idag finns det utrymme för att verka för en ökning. En sådan ökning kan bidra till miljömässiga fördelar genom att mängden råmaterial och energi reduceras jämfört med nytillverkning. Det finns därför en möjlighet för återtillverkning att bidra till en frikoppling av miljömässig påverkan från ekonomisk tillväxt, vilket i sin tur bidrar till ett mer hållbart samhälle. Fast att endast värdera nyttan av återtillverkning leder inte direkt till en tillväxt inom återtillverkningsindustrin. För att omfamna de miljömässiga, sociala och ekonomiska nyttor som återtillverkning kan bidra med måste originaltillverkare vara medvetna om hur återtillverkning kan initieras och implementeras i praktiken på ett ekonomiskt lönsamt sätt. Denna doktorsavhandlings syfte är därför att utveckla stöd för originaltillverkare att initiera lönsam återtillverkning. Forskningen utgår från en fallstudie och transdisciplinär forskningsmetodik där initieringen av lönsam återtillverkning studeras vid två originaltillverkare. Den utförda forskningen utvecklade kunskap om hur återtillverkning kan integrerats i en originaltillverkares befintliga verksamhet. Parallellt med detta utvecklades ekonomiska utvärderingsmetoder för att tillhandahålla ett mått på hur väl fallföretagen skulle kunna utföra återtillverkning. För fallstudien utvecklades det sju återtillverkningsscenarion som sträcker sig från centraliserad återtillverkning, som utförs av originaltillverkaren, till decentraliserad, som utförs vid flertalet platser inom ett återförsäljarnätverk. Vilket scenario som var mest fördelaktigt berodde exempelvis på riskmedvetenhet, samarbete mellan aktörer, och tillverkningsvolym. Men givet ideala förhållanden visades det att centraliserad återtillverkning vore potentiellt mest fördelaktigt för fallföretaget, eftersom färre mellanhänder och stordriftsfördelar möjliggör lägre kostnader. För det andra fallföretagets initieringen av återtillverkning vid tillämpning av den transdisciplinära forskningsmetodiken var det ett affärsmodellsfokus, vilket innebar att återtillverkningssystemet var en konsekvens av ett beslut för en viss affärsmodell. I denna del av forskningen utvecklades en scenariobaserad analysmetod för att förstå under vilka förhållanden som affärsmodellen tillsammans med återtillverkning vore mer lukrativt för företaget – originaltillverkaren – och mindre kostsamt för användaren – kunden. För detta utvecklades en systematisk ansats för ekonomiska utvärderingar bestående av tre steg: (1) tillhandahåll en kostnadsöverblick för varje affärsmodell, (2) skapa scenarion genom att modifiera kostnadsdrivarna, och (3) kombinera scenarion för att uppnå synergieffekter. Med utgångspunkt i fallstudien utvecklades även faktorer för att forma krav för hur originaltillverkare kan initiera återtillverkning. Dessa faktorer delas upp i grundläggande och stödjande kravställningar, och de bygger tillsammans upp ett ramverk benämnt Återtillverkningsraketen. De grundläggande kravställningarna lyfter fram elementära krav vid utförandet av återtillverkning och om en av de fyra skulle saknas kan återtillverkning inte utföras på ett framgångsrikt sätt. De stödjande kravställningarna är av värde för att förbättra återtillverkningseffektiviteten genom exempelvis bekymmersfritt utförande av processer, organisationsförändringar, eller informationsutbyten. Därigenom, för att nå den fulla potentialen av återtillverkning, behövs både de grundläggande och de stödjande kravställningarna. Dessutom utforskades området för ekonomiska utvärderingsmetoder i en systematisk litteraturgenomgång för att identifiera insikter för att utveckla sådana metoder skräddarsydda för individuella originaltillverkare som initierar återtillverkning. För ändamålet föreslås sex perspektiv för att forma ekonomiska utvärderingsmetoder. Dessa täcker såväl systemgränserna för utvärderingarna som individuella behov och visioner hos originaltillverkare. För att vidare stödja företagen utvecklades ett ramverk för att välja ekonomiska utvärderingsmetoder för initieringar av återtillverkning baserat på användarvänlighet och förmåga att hantera komplexa datamängder. Slutligen föreslås det att tillämpa de framtagna kravställningarna tillsammans med ekonomisk utvärdering genom att iterativt undersöka möjligheterna för hur återtillverkning kan initieras för originaltillverkare. De grundläggande kravställningarna influerar upplägget för den första iterationen av den ekonomiska utvärderingen, vilken i sin tur nyttjas för att förfina hur de grundläggande kravställningarna kan läggas samman på ett ekonomiskt fördelaktigt sätt. När en godtagbar nivå uppnåtts kan ytterligare en iterativ process utföras mellan de stödjande kravställningarna och den ekonomiska värderingen. Genom att tillämpa det föreslagna tillvägagångssättet kan möjligheterna för återtillverkning undersökas på en detaljerad nivå innan initieringsförsök i praktiken, och såldes kan mängden slösade resurser minskas. Utöver detta integrerades det iterativa tillvägagångssättet med en 5-stegsansats för initiering av återtillverkning (5AFIR).
Download or read book Remanufacturing in the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2019-10-16 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic growth and rising levels of consumption in developing and developed countries has been observed as being deeply coupled with natural resource usage and material consumption. The increasing need for natural resources has raised concerns regarding issues such as resource scarcity, undesirable environmental impacts due to material extraction, primary production, and suboptimal product disposal, and social or political tensions. Product End-of-Life (EoL) options, such as reusing or recycling, attempt to limit or reduce the amount of waste sent to a landfill, providing strategic means to decouple the link between economic growth and resource usage. These EoL options have the potential to close material loops, further utilizing wastes as resources, reducing environmental impacts, conserving natural resources, reducing material prices, and providing job opportunities in developing countries. Remanufacturing, on the other hand, is a unique EoL option due to increasing the number of life cycles of a product before final disposal. First, recurring environmental benefits, such as emission and raw material extraction avoidance are obtained with each additional product life cycle. Second, individual resource efficiency yields increase through product remanufacture. Resource efficiency or, using more with less will continue to compound with each additional life cycle. Third, recirculating products decreases the demand and dependency for primary resource production, further closing the material loop and creating a more circular economy. In addition, remanufacturing can initiate more preferable EoL options such as recovery, recycling, and waste reduction. While remanufacturing offers numerous benefits, there is significant lack of literature and books covering the fundamentals of operations, technologies and business models. The proposed book will provide in-depth coverage of remanufacturing fundamentals and its strong link to circular economy and resource efficiency.
Download or read book Competitive Quality Choice and Remanufacturing written by Adem Orsdemir and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: We consider an original equipment manufacturer (OEM) who faces competition from an independent remanufacturer(IR). The OEM decides the quality of the new product, which also determines the quality of the competing remanufactured product. The OEM and the IR then competitively determine their production quantities. We explicitly characterize how the OEM competes with the IR in equilibrium. Specifically, we show that the OEM relies more on quality as a strategic lever when it has a stronger competitive position (determined by the relative cost and value of new and remanufactured products), and in contrast it relies more heavily on limiting quantity of cores when it has a weaker competitive position. The IR's entry threat as well as its successful entry can decrease the consumer surplus. Furthermore, our results illustrate that ignoring the competition or the OEM's quality choice leads to overestimating benefits of remanufacturing for consumer and social welfare. In addition, we show an IR with either a sufficiently weak competitive position (so the OEM deters entry) or a sufficiently strong one (so the OEM is forced to limit quantity of cores) is desirable for reducing the environmental impact. Comparing our results with the benchmark in which the OEM remanufactures suggests that encouraging IRs to remanufacture in lieu of the OEMs may not benefit the environment. Furthermore, the benchmark illustrates that making remanufacturing more attractive improves the environmental impact when the remanufacturer is the OEM, while worsening it when remanufacturing is done by the IR.
Download or read book Industrial and Commercial Energy Tax Credits written by United States. Congress. Senate. Committee on Finance. Subcommittee on Taxation and Debt Management and published by . This book was released on 1982 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supply Chain Architecture written by William T. Walker and published by CRC Press. This book was released on 2004-10-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The book is highly readable, informative, thought provoking, and educational.At every stage, Walker challenges the reader to move away from conventional supply chain thinking to a broader-view, highly concise approach that focuses on the organization's objectives. The book will help you visualize a supply network and develop a blueprint for your
Download or read book Glocalized Solutions for Sustainability in Manufacturing written by Jürgen Hesselbach and published by Springer Science & Business Media. This book was released on 2011-03-19 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 continues a long tradition of scientific meetings focusing on the exchange of industrial and academic knowledge and experiences in life cycle assessment, product development, sustainable manufacturing and end-of-life-management. The theme “Glocalized Solutions for Sustainability in Manufacturing” addresses the need for engineers to develop solutions which have the potential to address global challenges by providing products, services and processes taking into account local capabilities and constraints to achieve an economically, socially and environmentally sustainable society in a global perspective. Glocalized Solutions for Sustainability in Manufacturing do not only involve products or services that are changed for a local market by simple substitution or the omitting of functions. Products and services need to be addressed that ensure a high standard of living everywhere. Resources required for manufacturing and use of such products are limited and not evenly distributed in the world. Locally available resources, local capabilities as well as local constraints have to be drivers for product- and process innovations with respect to the entire life cycle. The 18th CIRP International Conference on Life Cycle Engineering (LCE) 2011 serves as a platform for the discussion of the resulting challenges and the collaborative development of new scientific ideas.
Download or read book Design for Innovative Value Towards a Sustainable Society written by Mitsutaka Matsumoto and published by Springer Science & Business Media. This book was released on 2012-04-03 with total page 1152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first EcoDesign International Symposium held in 1999, this symposium has led the research and practices of environmentally conscious design of products, services, manufacturing systems, supply chain, consumption, as well as economics and society. EcoDesign 2011 - the 7th International Symposium on Environmentally Conscious Design and Inverse Manufacturing - was successfully held in the Japanese old capital city of Kyoto, on November 30th – December 2nd, 2011. The subtitle of EcoDesign 2011 is to “design for value innovation towards sustainable society.” During this event, presenters discussed the way to achieve both drastic environmental consciousness and value innovation in order to realise a sustainable society.
Download or read book Sustainable Operations and Closed Loop Supply Chains written by Gilvan C. Souza and published by Business Expert Press. This book was released on 2012-05-25 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written for any company or organization that needs detailed guidance on the journey towards sustainability, starting from zero. And if your firm wants to be sustainable, you know you have to consider the triple bottom line when making decisions: economic (profit), environmental (planet), and social (people). By focusing on the triple bottom line (3Ps), your firm can be assured of a steady supply of inputs such as raw materials and labor. Author Souza carefully explains the first step towards sustainability, which is aimed at reducing waste in operations, with the help of such tools as lean and Six Sigma. He will also help guide your firm through a “life cycle assessment” (LCA) for each of the main products and processes. LCA is a methodology designed to assess the environmental impact (such as energy consumption, and toxicity) of a product or process through its life cycle: raw material extraction, transportation, manufacturing, packaging and distribution, use by consumers, and end-of-life. The final step in the journey towards sustainability is to close the loop. To close the loop, you’ll learn about designing efficient packaging, designing products for multiple life cycles (as in design for remanufacturing), or designing products according to a Cradle to Cradle® philosophy, which ensures no use of toxic materials, ease of disassembly, and 100% up-cyclability. The book concludes with the “final P” of sustainability—people, with some examples of firms that invest heavily in the social bottom line.
Download or read book Committee Reports for the National Conference on Weights and Measures written by National Conference on Weights and Measures. Meeting and published by . This book was released on 2001 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Routledge Companion to Lean Management written by Torbjorn H. Netland and published by Taylor & Francis. This book was released on 2016-12-08 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in the phenomenon known as "lean" has grown significantly in recent years. This is the first volume to provide an academically rigorous overview of the field of lean management, introducing the reader to the application of lean in diverse application areas, from the production floor to sales and marketing, from the automobile industry to academic institutions. The volume collects contributions from well-known lean experts and up-and-coming scholars from around the world. The chapters provide a detailed description of lean management across the manufacturing enterprise (supply chain, accounting, production, sales, IT etc.), and offer important perspectives for applying lean across different industries (construction, healthcare, logistics). The contributors address challenges and opportunities for future development in each of the lean application areas, concluding most chapters with a short case study to illustrate current best practice. The book is divided into three parts: The Lean Enterprise Lean across Industries A Lean World. This handbook is an excellent resource for business and management students as well as any academics, scholars, practitioners, and consultants interested in the "lean world."
Download or read book The Routledge Companion to Production and Operations Management written by Martin K. Starr and published by Routledge. This book was released on 2017-03-27 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This remarkable volume highlights the importance of Production and Operations Management (POM) as a field of study and research contributing to substantial business and social growth. The editors emphasize how POM works with a range of systems—agriculture, disaster management, e-commerce, healthcare, hospitality, military systems, not-for-profit, retail, sports, sustainability, telecommunications, and transport—and how it contributes to the growth of each. Martin K. Starr and Sushil K. Gupta gather an international team of experts to provide researchers and students with a panoramic vision of the field. Divided into eight parts, the book presents the history of POM, and establishes the foundation upon which POM has been built while also revisiting and revitalizing topics that have long been essential. It examines the significance of processes and projects to the fundamental growth of the POM field. Critical emerging themes and new research are examined with open minds and this is followed by opportunities to interface with other business functions. Finally, the next era is discussed in ways that combine practical skill with philosophy in its analysis of POM, including traditional and nontraditional applications, before concluding with the editors’ thoughts on the future of the discipline. Students of POM will find this a comprehensive, definitive resource on the state of the discipline and its future directions.
Download or read book Technology Innovation for the Circular Economy written by Nabil Nasr and published by John Wiley & Sons. This book was released on 2024-01-19 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: TECHNOLOGY INNOVATION FOR THE CIRCULAR ECONOMY The book comprises 56 peer-reviewed chapters comprehensively covering in-depth areas of circular economy design, planning, business models, and enabling technologies. Some of the greatest opportunities for innovation in the circular economy are in remanufacturing, refurbishment, reuse, and recycling. Critical to its growth, however, are developments in product design approaches and the manufacturing business model that are often met with challenges in the current, largely linear economies of today’s global manufacturing chains. The conference hosted by the REMADE Institute in Rochester, NY, brought together U.S. and international researchers, industry engineers, technologists, and policymakers, to discuss the myriad intertwining issues relating to the circular economy. This book consists of 56 chapters in 10 distinct parts covering broad areas of research and applications in the circular economy area. The first four parts explore the system level work related to circular economy approaches, models and advancements including the use of artificial intelligence (AI) and machine learning to guide implementation, as well as design for circularity approaches. Mechanical and chemical recycling technologies follow, highlighting some of the most advanced research in those areas. Next, innovation in remanufacturing is addressed with descriptions of some of the most advanced work in this field. This is followed by tire remanufacturing and recycling, highlighting innovative technologies in addressing the volume of end-of-use tires. Pathways to net-zero emissions in manufacturing of materials concludes the book, with a focus on industrial decarbonization. Audience This book has a wide audience in academic institutes, business professionals and engineers in a variety of manufacturing industries. It will also appeal to economists and policymakers working on the circular economy, clean tech investors, industrial decision-makers, and environmental professionals.
Download or read book Handbook of Aeronautical Inspection and Pre Purchase written by Denny Pollard and published by Trafford Publishing. This book was released on 2005-12-20 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you are a prospective owner, pilot, broker, or aviation mechanic or anyone who needs to know where to find information about the aviation airworthiness, maintenance, inspections and rules---you'll find all he information you need in this one volume. The following expert tips in this book will walk you thought step by step without worrying if you are buying a hangar queen. Every aspect about inspections, mechanic privileges, mechanic and owner responsibilities and what you should look for and inspect when choosing an aircraft. Know where to find the tools to aid in research of the aircraft history, specifications, details on modifications and changes made through the years, Type-Certificate Date Sheets, FAA Airworthiness Directives, Supplementary Type Certificates, Maintenance Alerts for each make and model aircraft, and aircraft records. This book documents the history, experiences and hardships of purchasing aircraft. It describes the difficult and hazardous situations demanding ingenuity, resourcefulness and a lot of difficult hard work. Denny's years of experience in the aviation field demonstrates a lesser-known side of aviation that is from the mechanic's' perspective. This book is the first of its' kind and once started, compels the reader to continue to the last page. Before you buy your next aircraft, have an independent inspection completed by an Airframe and Powerplant mechanic. Whether you are an American or overseas buyer you will be able to buy with confidence with a pre-purchase inspection. With your pre-purchase inspection you should receive an extensive condition report verifying the condition and originality on the aircraft you wish to purchase. The pre-purchase should be able to tell you if the aircraft is currently airworthy, and if the aircraft has been in an accident or been modified. Along with the detailed report you should receive several photographs, including pictures of the fuselage, engine compartment, and interior and close ups of areas of concern. After the inspection, the mechanic or agent for service should discuss this information with you. Are you aware the pre-purchase agreement you sign may be the single most important document, among the dozen or so documents sometimes required? And which specific items should you include in your purchase agreement. Has your aircraft (Or the One That You Are Thinking About Purchasing) been subjected to less than scrupulous inspection and maintenance practices, over the years? Sometimes even a very competent pre-purchase inspection does not include a complete inspection of the aircraft records because it is often very time consuming to read them thoroughly. Positively, the most enlightening pre-buy inspection is a good evaluation of the aircraft maintenance records. A complete evaluation will identify the current status of the aircraft as required by 14 CFR 91.417, uncover time frames of no maintenance, or lack of maintenance, identify inaccurate engine cycle tracking as well as aircraft time tracking and reveal aircraft damage history. Prospective purchaser is responsible for discovering discrepancies that can only be revealed by in-flight evaluation such as flight characteristics, proper functioning of navigational instrumentation, avionics and autopilot. The purpose of the Pre-purchase Inspection is to protect the interest of the buyer; it is not intended to be an Annual/Airworthiness Inspection.
Download or read book Logistics Management written by Jan Dethloff and published by Springer. This book was released on 2014-12-30 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the Logistik-Management-Konferenz 2013, which was organized by the VHB Wissenschaftliche Kommission Logistik and held in Bremen, Germany. The papers reflect the current state-of-the-art in logistics and supply chain management, focusing on environmental sustainability in logistics and supply chain network dynamics and control. The target audience primarily consists of researchers and practitioners in the field, but the book may also be beneficial for graduate students.
Download or read book Towards Lean Remanufacturing written by Jelena Kurilova-Pališaitien? and published by Linköping University Electronic Press. This book was released on 2015-05-25 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Remanufacturing is an environmentally sound material recovery option which is essential to compete for sustainable manufacturing. The aim with remanufacturing at a majority of companies is to prolong physical product performance by delivering the same or betterthan-original product quality. In general, remanufacturing is an industrial process that brings used products back to useful life by requiring less effort than is demanded by the initial production process. Consequently, from a product life-cycle perspective, remanufacturing generates great product value. Remanufacturers lag behind manufacturers since they often face complex and unpredictable material and information flows. Based on a review of remanufacturing research, remanufacturing challenges in material and information flows can be classified into three groups: insufficient product quality, long and unstable process lead times, and an unpredictable level of inventory. While some remanufacturing researchers state that manufacturing and remanufacturing are significantly different, they have more in common than many other processes operations. Therefore, to sustain competitive remanufacturing, companies investigate an opportunity for improvement through the employment of lean production that generates significant benefits for manufacturers. In order to investigate the potential to address remanufacturing challenges by lean production, a Minimum time for material and information flow analysis (MiniMifa) method was developed. This method originates from the value stream mapping (VSM) method, broadly practiced to bring lean to manufacturing companies. The focus of MiniMifa was to collect empirical data on the identified groups of remanufacturing challenges from the remanufacturing perspective, and to provide a basis for the development of improvements originating from lean principles. Lean production was selected for this research due to its system perspective on material and information flows. Among the defined lean principles in remanufacturing, a pull principle was investigated at the case companies. The suggested principle demonstrated a reduction in lead time, followed by improvements in inventory level and product quality. However, in order to become lean, remanufacturers have to overcome three levels of lean remanufacturing challenges: external and internal challenges as well as lean wastes. Finally, this research reduces the gap between academia and industry by contributing with a possible solution to the identified remanufacturing challenges in material and information flows.
Download or read book Principles of Flexible Endoscopy for Surgeons written by Jeffrey M. Marks and published by Springer Science & Business Media. This book was released on 2013-09-10 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written entirely by surgical endoscopists, Principles of Flexible Endoscopy for Surgeons presents a comprehensive overview of past, present, and future flexible gastrointestinal endoscopic techniques, with a focus on educating surgeons who may or may not already have the skills to perform flexible endoscopy. In addition to the endoscopic management of surgical issues, the volume describes the role of surgery in the management of endoscopic complications. Basic as well as advanced flexible endoscopic techniques are presented in both a didactic and visual mode, with representative endoscopic images and video clips. Recent endoscopic advancements which are not routinely a core component of surgical training programs are also covered in detail. Extensively illustrated with endoscopic images and accompanied by a DVD, Principles of Flexible Endoscopy for Surgeons is a valuable resource for surgeons on all facets of flexible endoscopy.