Download or read book Wettability at High Temperatures written by N. Eustathopoulos and published by Elsevier. This book was released on 1999-11-24 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to bring together current scientific understanding of wetting behaviour that has been gained from theoretical models and quantitative experimental observations. The materials considered are liquid metals or inorganic glasses in contact with solid metals or ceramics at temperatures of 200-2000oC. Wetting has been a significant scientific concern for the last two centuries and reference will be made to classical work by nineteenth century scientists such as Dupré, Laplace and Young that was validated by observations of the behaviour of chemically inert ambient temperature systems. In attempting to achieve the aims of the book, the text has been divided into ten Chapters that can be grouped into four stages of presentation. The first stage comprises two Chapters that review established and newly developed models for their relevance to wetting behaviour at high temperatures, including recent models that encompass the role of chemical reactions at the solid/liquid interfaces. Attention is paid both to equilibrium wetting behaviour (Chapter 1) and to the factors that control the approach to equilibrium (Chapter 2). Then follow Chapters concerned with experimental techniques for scientific measurement of the extent of wetting (Chapter 3) and with the surface energy data for both metals and non-metals that are essential for quantitative interpretation of wetting behaviour (Chapter 4). Descriptions of experimentally determined and quantified wetting behaviour are presented and interpreted in the third part comprising five Chapters dealing with the characteristics of metal/metal, metal/oxide, metal/non-oxide, metal/carbon and molten glass/solid systems. The book concludes with a Chapter commenting on the role of wetting behaviour in joining similar and dissimilar materials by liquid route techniques.
Download or read book Wettability at High Temperatures written by Nicolas Eustathopoulos and published by . This book was released on 1999 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contact Angle Wettability and Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-07-30 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume documents the proceedings of the Second International Symposium on Contact Angle, Wettability and Adhesion held in Newark, NJ, June 21-23, 2000. Since the first symposium, held in 1992, there had been tremendous research activity on many ramifications of wettability phenomena.This volume contains a total of 33 papers, which were all pro
Download or read book Wettability and Interfacial Phenomena written by Rita Khanna and published by BoD – Books on Demand. This book was released on 2019-05-22 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wettability at the solid/liquid interface, its dynamics, tunability, the influence of operating parameters, surface and interfacial phenomena play an increasingly significant role in a wide variety of applications, for example, material processing, nanotechnology, oil recovery, oil spills, chemical leaching, water management, and disease transmission. Although a mature field, it is experiencing dramatic developments on several fronts with emerging applications in new fields. This book presents a collection of eight chapters on nanoscale wetting phenomena, oil extraction from reservoir rocks, the role of coatings, particle morphology, surface roughness and viscosity in metal processing, and practical applications of superhydrophobic behaviour in cell culturing, isolation, anti-icing, anti-reflective and anti-corrosion coatings in the transportation and optical devices fields.
Download or read book Ultra High Temperature Thermal Energy Storage Transfer and Conversion written by Alejandro Datas and published by Woodhead Publishing. This book was released on 2020-09-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-High Temperature Thermal Energy Storage, Transfer and Conversion presents a comprehensive analysis of thermal energy storage systems operating at beyond 800°C. Editor Dr. Alejandro Datas and his team of expert contributors from a variety of regions summarize the main technological options and the most relevant materials and characterization considerations to enable the reader to make the most effective and efficient decisions.This book helps the reader to solve the very specific challenges associated with working within an ultra-high temperature energy storage setting. It condenses and summarizes the latest knowledge, covering fundamentals, device design, materials selection and applications, as well as thermodynamic cycles and solid-state devices for ultra-high temperature energy conversion.This book provides a comprehensive and multidisciplinary guide to engineers and researchers in a variety of fields including energy conversion, storage, cogeneration, thermodynamics, numerical methods, CSP, and materials engineering. It firstly provides a review of fundamental concepts before exploring numerical methods for fluid-dynamics and phase change materials, before presenting more complex elements such as heat transfer fluids, thermal insulation, thermodynamic cycles, and a variety of energy conversation methods including thermophotovoltaic, thermionic, and combined heat and power. Reviews the main technologies enabling ultra-high temperature energy storage and conversion, including both thermodynamic cycles and solid-state devices Includes the applications for ultra-high temperature energy storage systems, both in terrestrial and space environments Analyzes the thermophysical properties and relevant experimental and theoretical methods for the analysis of high-temperature materials
Download or read book High Temperature Ceramic Matrix Composites 8 written by Litong Zhang and published by John Wiley & Sons. This book was released on 2014-06-09 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains 78 papers from the 8th International Conference on High Temperature Ceramic Matrix Composites, held September 22-26, 2013 in Xi'an, Shaanxi, China. Chapters include: Ceramic Genome, Computational Modeling, and Design Advanced Ceramic Fibers, Interfaces, and Interphases Nanocomposite Materials and Systems Polymer Derived Ceramics and Composites Fiber Reinforced Ceramic MatrixComposites Carbon-Carbon Composites: Materials, Systems, and Applications Ultra High Temperature Ceramics and MAX Phase Materials Thermal and Environmental Barrier Coatings
Download or read book MAX Phases and Ultra High Temperature Ceramics for Extreme Environments written by Low, I. M. and published by IGI Global. This book was released on 2013-05-31 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramics are a versatile material, more so than is widely known. They are thermal resistant, poor electrical conductors, insulators against nuclear radiation, and not easily damaged, making ceramics a key component in many industrial processes. MAX Phases and Ultra-High Temperature Ceramics for Extreme Environments investigates a new class of ultra-durable ceramic materials, which exhibit characteristics of both ceramics and metals. Readers will explore recent advances in the manufacturing of ceramic materials that improve their durability and other physical properties, enhancing their overall usability and cost-effectiveness. This book will be of primary use to researchers, academics, and practitioners in chemical, mechanical, and electrical engineering. This book is part of the Research Essentials collection.
Download or read book Research and Development of High Temperature Materials for Industry written by E. Bullock and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Matrix Composites written by Antonio Contreras Cuevas and published by Springer. This book was released on 2018-10-27 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers several aspects of the synthesis of composites by the pressureless infiltration technique. It describes the methods used to obtain green preforms, such as cold pressed and hot sintering, describing the heating time, load, and time required for pressing the preforms. Additionally, wettability phenomena, which is directly related on infiltration, is extensively described. Wettability process and interfacial reactions are analyzed in many ceramic-metal systems prior to fabricate the composites. A complete description of fabrication processes for Metal Matrix Composites is included. An extensive section on structural, chemical, and mechanical characterization of composites fabricated with aluminum and magnesium alloys as matrices reinforced with titanium carbide (TiC), aluminum nitride (AlN), silicon carbide (SiC) and alumina (Al2O3) is included. Relevant techniques for joining composites, such as welding and brazing are addressed. As well as issues pertaining to the corrosion and wear of composites are discussed as well. Corrosion behavior of some composites exposed to aqueous media was analyzed. Corrosion of composites using TiC and SiC like reinforcement and Al, Ni, and some Al-Cux, Al-Mgx and Al-Cu-Li alloys like matrix is discussed extensively. The structural characterization techniques addressed include: scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), optical microscopy (OM), differential thermal analysis (DTA), high resolution transmission electron microscopy (HRTEM), and thermogravimetry analysis (TGA). Mechanical testing including hardness, elastic modulus, tension tests, and impact tests were used in the characterization of composites. Theoretical models for prediction of some mechanical properties are included too.
Download or read book Characterization of Minerals Metals and Materials 2016 written by Shadia Ikhmayies and published by John Wiley & Sons. This book was released on 2016-02-09 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization is an important and fundamental step in material research before and after processing. This bookfocuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. It is a highly authoritative collection of articles written by experts from around the world. The articles center on materials characterization, extraction, processing, corrosion, welding, solidification, and method development. In addition, articles focus on clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic, magnetic, environmental, advanced and soft materials. This book will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.
Download or read book Elevated Temperature Coatings written by Narendra B. Dahorte and published by John Wiley & Sons. This book was released on 2013-10-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This conference proceedings focuses on processing and characterizing high-temperature coatings with regard to engineering, physical, and chemical properties. It includes the synthesis of new and unconventional coating materials and addresses various existing methods along with novel and innovative techniques of producing coatings and their applications.
Download or read book Formation of Non wettable Soils written by Leonard F. DeBano and published by . This book was released on 1966 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Processing and Manufacturing Science written by Rajiv Asthana and published by Elsevier. This book was released on 2006-01-09 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Materials Science in Manufacturing focuses on materials science and materials processing primarily for engineering and technology students preparing for careers in manufacturing. The text also serves as a useful reference on materials science for the practitioner engaged in manufacturing as well as the beginning graduate student. Integrates theoretical understanding and current practices to provide a resource for students preparing for advanced study or career in industry. Also serves as a useful resource to the practitioner who works with diverse materials and processes, but is not a specialist in materials science. This book covers a wider range of materials and processes than is customary in the elementary materials science books. This book covers a wider range of materials and processes than is customary in the elementary materials science books. * Detailed explanations of theories, concepts, principles and practices of materials and processes of manufacturing through richly illustrated text * Includes new topics such as nanomaterials and nanomanufacturing, not covered in most similar works * Focuses on the interrelationship between Materials Science, Processing Science, and Manufacturing Technology
Download or read book Corrosion and Reliability of Electronic Materials and Devices written by Robert B. Comizzoli and published by The Electrochemical Society. This book was released on 1999 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 4th International Symposium on High Temperature Metallurgical Processing written by Tao Jiang and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, global metallurgical industries have experienced fast and prosperous growth. High temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for the growth. This symposium provides a stage to introduce the advancements and developments of new high temperature metallurgical technologies and their applications to the areas of processing of minerals, extraction of metals, preparation of refractory and ceramic materials, sintering and synthesis of fine particles, treatment and recycling of slag and wastes, and saving of energy and protection of environment.
Download or read book Interfacial Physical Chemistry of High Temperature Melts written by Kusuhiro Mukai and published by CRC Press. This book was released on 2019-08-02 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This English translation of a well-known Japanese book covers interfacial physicochemistry in materials science, especially for iron- and steelmaking processes. Interfacial Physical Chemistry of High-Temperature Melts bridges the gap between the basics and applications of physicochemistry. The book begins with an overview of the fundamentals of interfacial physical chemistry and discusses surface tension, describing the derivation of important equations to guide readers to a deep understanding of the phenomenon. The book then goes on to introduce interfacial properties of high-temperature melts, especially the Marangoni effect, and discusses applications to materials processing at high temperature focusing on recent research results by the author and the co-workers. This book is aimed at researchers, graduate students, and professionals in materials processing. Video clips of in-situ observation including experiments under microgravity condition and x-ray observation are available for download on the publisher's website to allow for a deeper understanding.
Download or read book Alloys and Intermetallic Compounds written by Cristina Artini and published by CRC Press. This book was released on 2017-07-12 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of alloys. The book emphasizes the correlation between modeling and technological developments while discussing topics such as wettability of Ultra High Temperature Ceramics by metals, active brazing of diamonds to metals in cutting tools, surface issues in medicine, novel Fe-based superconductors, metallic glasses, high entropy alloys, and thermoelectric materials.
