Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Well Control for Completions and Interventions written by Howard Crumpton and published by Gulf Professional Publishing. This book was released on 2018-04-04 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Control for Completions and Interventions explores the standards that ensure safe and efficient production flow, well integrity and well control for oil rigs, focusing on the post-Macondo environment where tighter regulations and new standards are in place worldwide. Too many training facilities currently focus only on the drilling side of the well's cycle when teaching well control, hence the need for this informative guide on the topic. This long-awaited manual for engineers and managers involved in the well completion and intervention side of a well's life covers the fundamentals of design, equipment and completion fluids. In addition, the book covers more important and distinguishing components, such as well barriers and integrity envelopes, well kill methods specific to well completion, and other forms of operations that involve completion, like pumping and stimulation (including hydraulic fracturing and shale), coiled tubing, wireline, and subsea intervention. - Provides a training guide focused on well completion and intervention - Includes coverage of subsea and fracturing operations - Presents proper well kill procedures - Allows readers to quickly get up-to-speed on today's regulations post-Macondo for well integrity, barrier management and other critical operation components
Download or read book Well Cementing written by E.B. Nelson and published by Newnes. This book was released on 1990-09-24 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cementing is arguably the most important operation performed on a well. Well cementing technology is an amalgam of many interdependent scientific and engineering disciplines which are essential to achieve the primary goal of well cementing - zonal isolation. This textbook is a comprehensive and up-to-date reference concerning the application of these disciplines to cementing a well.``Well Cementing'' is envisioned as an upper-level university book, as well as a reference for practicing engineers and scientists. The first section of the book illustrates how the quality of the hydraulic seal provided by the cement sheath can affect well performance. The second section concentrates on the design phase of a cementing treatment, and various aspects of cement job execution are covered in the third section. The fourth section addresses cement job evaluation. The text is supported by many tables and figures, an extensive bibliography and an index. There are also chapters devoted to subjects which are currently of particular interest to the industry, including the prevention of annular gas migration, foamed cements, and cementing horizontal wellbores. The chemistry associated with well cementing is presented in detail.Most of the contributors to this volume are employees of Dowell Schlumberger, one of the leading companies in this field.
Download or read book Deepwater Drilling written by Peter Aird and published by Gulf Professional Publishing. This book was released on 2018-12-03 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deepwater Drilling: Well Planning, Design, Engineering, Operations, and Technology Application presents necessary coverage on drilling engineering and well construction through the entire lifecycle process of deepwater wells. Authored by an expert with real-world experience, this book delivers illustrations and practical examples throughout to keep engineers up-to-speed and relevant in today's offshore technology. Starting with pre-planning stages, this reference dives into the rig's elaborate rig and equipment systems, including ROVs, rig inspection and auditing procedures. Moving on, critical drilling guidelines are covered, such as production casing, data acquisition and well control. Final sections cover managed pressure drilling, top and surface hole 'riserless' drilling, and decommissioning. Containing practical guidance and test questions, this book presents a long-awaited resource for today's offshore engineers and managers. - Helps readers gain practical experience from an author with over 35 years of offshore field know-how - Presents offshore drilling operational best practices and tactics on well integrity for the entire lifecycle of deepwater wells - Covers operations and personnel, from emergency response management, to drilling program outlines
Download or read book Applied Well Cementing Engineering written by Gefei Liu and published by Gulf Professional Publishing. This book was released on 2021-03-25 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Well Cementing Engineering delivers the latest technologies, case studies, and procedures to identify the challenges, understand the framework, and implement the solutions for today's cementing and petroleum engineers. Covering the basics and advances, this contributed reference gives the complete design, flow and job execution in a structured process. Authors, collectively, bring together knowledge from over 250 years of experience in cementing and condense their knowledge into this book. Real-life successful and unsuccessful case studies are included to explain lessons learned about the technologies used today. Other topics include job simulation, displacement efficiency, and hydraulics. A practical guide for cementing engineer, Applied Well Cementing Engineering, gives a critical reference for better job execution. - Provides a practical guide and industry best practices for both new and seasoned engineers - Independent chapters enable the readers to quickly access specific subjects - Gain a complete framework of a cementing job with a detailed road map from casing equipment to plug and abandonment
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Download or read book Sealing of Boreholes and Underground Excavations in Rock written by K. Fuenkajorn and published by Springer Science & Business Media. This book was released on 1996-05-31 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sealing of boreholes and underground excavations has not received much engineering attention until fairly recently. The growing awareness of and sensitivity to environmental concerns of the technical community as well as of the public at large has resulted in an increasing recognition of the fact that these geological penetrations may have an environmental impact. The issue of possible contamination resulting from migration along boreholes, adits, shafts or tunnels unquestionably has been raised most forcefully with in the context of nuclear waste disposal. Several nuclear waste disposal programs, notably the Civilian and the Defence programs of the US De partment of Energy, the US Nuclear Regulatory Commission and the Canadian and Swedish radioactive waste disposal programs have conducted major research efforts aimed at developing adequate seal designs for penet rations in host rock formations for high-level nuclear waste repositories. While a considerable data base has been gathered over the last two decades or so with regard to the performance of seals, most of the information is presented in research reports and widely scattered papers in journals and proceedings of conferences. Hence, the materials are not readily accessible to potential users such as designers, contractors or regulators who are not familiar with nuclear waste disposal programs.
Download or read book Well Integrity for Workovers and Recompletions written by Les Skinner and published by Gulf Professional Publishing. This book was released on 2021-02-25 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well Integrity for Workovers and Recompletions delivers the concise steps and processes necessary to ensure that production wells minimize failure. After understanding the introductory background on well integrity and establishing the best baseline, the reference advances into various failure modes that can be expected. Rounding out with an explanation and tools concerning economic considerations, such as how to increase reserve potential and rate of return, the book gives oil and gas engineers and managers a vital solution to keeping their assets safe and effective for the long-term gain. - Helps readers understand how to protect wells through the production, workover and recompletion lifecycle, both from an economic standpoint and technical view - Includes real-world examples with quizzes included at the end of each chapter - Examines why establishing an integrity baseline is important, along with a Well Integrity Management System
Download or read book Hydraulic Rig Technology and Operations written by Les Skinner and published by Gulf Professional Publishing. This book was released on 2018-11-30 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Rig Technology and Operations delivers the full spectrum of topics critical to running a hydraulic rig. Also referred to as a snubbing unit, this single product covers all the specific specialties and knowledge needed to keep production going, from their history, to components and equipment. Also included are the practical calculations, uses, drilling examples, and technology used today. Supported by definitions, seal materials and shapes, and Q&A sections within chapters, this book gives drilling engineers the answers they need to effectively run and manage hydraulic rigs from anywhere in the world. - Presents the full range of hydraulic machinery in drilling engineering, including basic theory, calculations, definitions and name conventions - Helps readers gain practical knowledge on day-to-day operations, troubleshooting, and decision-making through real-life examples - Includes Q&A quizzes that help users test their knowledge
Download or read book IADC Drilling Manual written by IADC Staff and published by . This book was released on 2014-12-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The IADC Drilling Manual, 12th edition, is the definitive manual for drilling operations, training, maintenance and troubleshooting. The two-volume, 26-chapter reference guide covers all aspects of drilling, with chapters on types of drilling rigs, automation, drill bits, casing and tubing, casing while drilling, cementing, chains and sprockets, directional drilling, downhole tools, drill string, drilling fluid processing, drilling fluids, hydraulics, drilling practices, floating drilling equipment and operations, high-pressure drilling hoses, lubrication, managed pressure drilling and related practices, power generation and distribution, pumps, rotating and pipehandling equipment, special operations, structures and land rig mobilization, well control equipment and procedures, and wire rope. A comprehensive glossary of drilling terms is also included. More than 900 color and black-and-white illustrations, 600 tables and thirteen videos. 1,158 pages. Copyright © IADC. All rights reserved.
Download or read book CLEAN written by Michael Kühn and published by Springer Science & Business Media. This book was released on 2012-12-14 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: The project CLEAN (CO2 Large-Scale Enhanced Gas Recovery in the Altmark Natural Gas Field) provides site specific knowledge for a potential future pilot project. This contributed volume gives an overview and final results of the entire project which is finalized to the end of 2012.
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Blowout and Well Control Handbook written by Robert D. Grace and published by Gulf Professional Publishing. This book was released on 2017-05-26 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blowout and Well Control Handbook, Second Edition, brings the engineer and rig personnel up to date on all the useful methods, equipment, and project details needed to solve daily well control challenges. Blowouts are the most expensive and one of the most preventable accidents in the oil and gas industry. While some rig crews experience frequent well control incidents, some go years before seeing the real thing. Either way, the crew must always be prepared with quick understanding of the operations and calculations necessary to maintain well control. Updated to cover the lessons learned and new technology following the Macondo incident, this fully detailed reference will cover detection of influxes and losses in equipment and methods, a greater emphasis on kick tolerance considerations, an expanded section on floating drilling and deepwater floating drilling procedures, and a new blowout case history from Bangladesh. With updated photos, case studies, and practice examples, Blowout and Well Control Handbook, Second Edition will continue to deliver critical and modern well control information to ensure engineers and personnel stay safe, environmentally-responsible, and effective on the rig. - Features updated and new case studies including a chapter devoted to the lessons learned and new procedures following Macondo - Teaches new technology such as liquid packer techniques and a new chapter devoted to relief well design and operations - Improves on both offshore and onshore operations with expanded material and photos on special conditions, challenges, and control procedures throughout the entire cycle of the well
Download or read book A Primer of Oil well Drilling written by Ron Baker and published by . This book was released on 1979 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Well Design written by Bernt S. Aadnoy and published by CRC Press. This book was released on 2010-09-15 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Well Design - Second Edition presents a unified approach to the well design process and drilling operations. Following an introduction to the field, the second chapter addresses drilling fluids, as well as optimal mud weight, hole cleaning, hydraulic optimization, and methods to handle circulation losses. A relatively large chapter on geomec
Download or read book Methodology to Evaluate the Potential for Ground Water Contamination from Geothermal Fluid Releases written by Karen Summers and published by . This book was released on 1980 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Managed Pressure Drilling written by Bill Rehm and published by Elsevier. This book was released on 2013-12-18 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: With extraction out of depleted wells more important than ever, this new and developing technology is literally changing drilling engineering for future generations. Never before published in book form, these cutting-edge technologies and the processes that surround them are explained in easy-tounderstand language, complete with worked examples, problems and solutions. This volume is invaluable as a textbook for both the engineering student and the veteran engineer who needs to keep up with changing technology.
